Database Develop

[ROM][ROOT][i9506] How to FLASH N' ROOT Lollipop Samsung TW

This guide help you to
install the Samsung Lollipop TouchWiz and get the root permissions
on Galaxy S4 GT-I9506​
Do it on your own responsibility! and keep in mind that you will lose your warranty!​
Before you proceed, make sure:
1) You have installed your Samsung Galaxy S4 GT-I9506 USB drivers on your PC (the easiest way is to install Kies)
2) Your S4 should have 70-80% charge remaining.
3) Backup all your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt
4) Make sure that Kies software is not running and disable your antivirus
Download the requirements:
Click on each one for download
-Odin software
-Recovery TWRP "flashable"
-SuperSu "flashable"
-Samsung Lollipop Firmware from SAMMOBILE (only if you have KitKat installed)
WARNING! I FOUND PROBLEMS WITH SOME SAMMOBILE FIRMWARE'S READ BELOW
The Czech Republic - ETL firmware (I9506XXUDOA6_I9506OXXDOA1), has WiFi broken
The Czech Republic (Vodafone) - VDC firmware (I9506XXUDOA6_I9506VFGDOA4), has wrong "Hidden" partition size
If you meet this problems you can download this official firmware from samsung updates site:
Greece - EUR firmware (I9506XXUDOAA_I9506EURDOB1)
BUILD DATE: 30.01.2015
How to install the firmware and root
If you already have the Lollipop firmware installed: Skip to the Step 8
NOTE: I racommend you to do the wipe of cache, dalvik cache, system, data partitions before proceeding,
this to prevent any problems with the apps (through recovery)
Step 1
Unzip the downloaded firmware, you will get a tar.md5 file.
Step 2
Turn OFF you mobile and go to Download Mode by pressing and holding the Power + Volume Down + Home Buttons.
together for few seconds followed by Power button then proceed with volume up.
Step 3
Now open ODIN on your PC and connect your Galaxy S4 to your computer.
Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 4
Click on PDA (or AP) in Odin and choose the file ".tar.md5"
Step 5
Check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
Step 6
Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
Step 7
When the installation is completed, you read a "Reset " then a "Pass". your phone will restart (first boot will take a longer time so don't panic)
> Step 8
now you have to do again all steps from Step 2, for flash the TWRP recovery needed for apply the ROOT,
the only difference is when you arrive on Step 4 you must have to choose the TWRP Recovery ".tar.md5" downloaded file
Step 9
Turn OFF you mobile and go to Recovery Mode by pressing and holding the Power + Volume Up + Home Buttons.
Step 10
Connect the mobile with USB and copy the "UPDATE-SuperSU-v2.45.zip" in the SD
Step 11
Click on the "INSTALL" button, select "UPDATE-SuperSU-v2.45.zip", and swipe to flash. After this reboot
Finish! Enjoy!
----------------------------------------------------------------------------------------------------------------------------​
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat the procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Make sure the antivirus is disabled
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install the USB driver.
- Try another computer.
Titanium Backup does not recognize the root:
- Install Titanium Backup version 7.0+
Titanium Backup does not recognize external SD:
- Install SDFix app for applying the missing external SD card permissions
Thanks to samersh72 for the inspiration to create the guide​

Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk

byanou69 said:
Thx for this guide! What about Knox value after manual flash?
Envoyé de mon LG-V500 en utilisant Tapatalk
Click to expand...
Click to collapse
After flash the warranty Knox is rightly marked,
that's becouse i wrote that you lose the warranty,
but this happens anyway if you perform unauthorized flash...

General Information:
CastagnaIT and my GT-I9506 devices are originally from ETL CSC... so Czech Republic firmware.
We found that the original ETL firmware has broken WiFi, and we discover that flashing the cache partition of Vodafone firmware has solved the issue... this is the reason we provide here an already fixed firmware.
Probably with newer updates it will be automatically solved, but for now this fix is working perfectly.
I dirty flashed the modified firmware file directly over my TW 4.4.2 installation, and I saw the phone has correctly get the update without any loosing of apps or datas... so my installation is exactly equivalent to a normal Sammy update.
Thanks for the attention.

German Vodafone have also broken WiFi...

The German rom seemed to work for me, no issues.
The German rom seemed to work for me, no issues.

Flash procedure check...
Developer.WL said:
German Vodafone have also broken WiFi...
Click to expand...
Click to collapse
Drady said:
The German rom seemed to work for me, no issues.
Click to expand...
Click to collapse
Hi,
I have a doubt... let me explain.
When you flashed with Odin, the correct procedure I think is this one.
1) After flash complete the phone must restart automatically
2) at the first boot, the recovery must be automatically activated and a flash of a cached element must appear
3) after this recovery flash, the phone reboot automatically and finally start with rom initialization
I think that for @Drady this has happened, and I think also that for @Developer.WL this has not happened.
This recovery flash is the culprit (probably) that give as result the wifi working.
I saw this, because I prepared a modded firmware with removed the recovery.img, so my Odin flash has not installed the stock recovery, leaving twrp as recovery.
After my flash, the phone was just shutdown (no reboot). Remembering that recovery flash was also done for previous KK firmware, I switched on the phone by pressing the buttons Vol-up + Power + Home, and my phone has booted into twrp and has flashed the missing cache part, than the phone auto-rebooted correctly and the system is working as it must.
My suggestion to @Developer.WL, is to reflash the firmware, taking care that at the first boot the phone must go to recovery (flash is about a couple of seconds) and after this must reboot into the rom...
Please let us know if this solve the wifi issue.
Thanks for cooperation.

AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.

kornelius1982 said:
AFAIK you should turn off device before enter download mode and then flash Czech version, this will let you to replace old modem with new one.
Click to expand...
Click to collapse
Yes, the download mode must be enabled from phone off status with buttons procedure (Vol-Down + Power + Home).

The fixed firmware is finally ready for download!

5.0
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..

Arter97 aosp kernel
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels

Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.

boggy27 said:
I am curious to try the official 5.0 even though i am waiting for the Nordic Countries(NEE) Release , ill just see if the WI-FI on German version works till than ..
Click to expand...
Click to collapse
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
yazsers said:
Is it possible to flash this kernel (link below) on this latest Official lollipop samsung release for i9506 ?
http://forum.xda-developers.com/showthread.php?t=2691648
---------- Post added at 05:41 PM ---------- Previous post was at 05:00 PM ----------
I have the answer : i9506 not supported for the moment by these kernels
Click to expand...
Click to collapse
Absolutely NOT!!! Arter kernel is AOSP based, Official Lollipop is TW...
---------- Post added at 09:32 PM ---------- Previous post was at 09:24 PM ----------
ShaneDiNozzo said:
Your fixed ROM's link is dead. MediaFire says "Dangerous File Blocked". Please upload it to another cloud.
Click to expand...
Click to collapse
Thanks for the head-up... already requested to Mediafire to remove the block on download... file is safe, not dangerous...

how to debloat after root? using root explorer how can i do?

smeroni68 said:
For your information, official 5.0.1 NEE has been released...
---------- Post added at 09:24 PM ---------- Previous post was at 09:10 PM ----------
Thank you! It has been released just today , that is great ! And thx for this helpfull post!
Click to expand...
Click to collapse

sibellius said:
how to debloat after root? using root explorer how can i do?
Click to expand...
Click to collapse
At this moment there is no way I tried root uninstall, TB and uninstall without any result.
I think we have to wait for updates

i don't fix glonass on this NEE version....

I have LineageOS 13, TWRP and I want to ROOT my i9506. As I understand, I can't ROOT it on LineageOS 13 - I have to install official ROM, ROOT it, and then install LineageOS again, yes?

Flashing Dead Android Doll Error After Root Attempt (XT1060 - VZW)

I tried to root my phone from the methods provided from here: http://forum.xda-developers.com/moto-x/general/root-moto-x-att-xt1058-5-1-lpa23-12-21-1-t3164125
I downloaded the necessary files for my specific device. Everything went fine in the flashing process. I booted my phone to check if it was the correct build version, and it was right (LPA23.12-39.7).
I proceeded to the next process, which was running the BLBROKE and RUN_Root file to root my phone. After the RUN_Root process finished ~15 minutes, my phone bootlooped. I tried to re-flash the LPA23.12-39.7 software, but it bootlooped again.
So I performed a hard reset. AFter the hard reset, it bootlooped again and this error showed up: https://drive.google.com/file/d/0BzXaUzs8MoBWSWRWbnh2TG9VTVU/view
I can get to fastboot and Qualcomm Emergency Mode, but anything I have done so far will come back that flashing dead android doll. Any help please? Thanks.

try flashing stock rom, chose the one you were using before brick.
here is guide:
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
firmware link:
https://yadi.sk/d/MCliEyCPfj7ZZ/MOTO.X1/XT1060

buddy means u downgrade your phone from build no. LPAS23.12-39.7-1 ??

ftan299 said:
I tried to root my phone from the methods provided from here: http://forum.xda-developers.com/moto-x/general/root-moto-x-att-xt1058-5-1-lpa23-12-21-1-t3164125
I downloaded the necessary files for my specific device. Everything went fine in the flashing process. I booted my phone to check if it was the correct build version, and it was right (LPA23.12-39.7).
I proceeded to the next process, which was running the BLBROKE and RUN_Root file to root my phone. After the RUN_Root process finished ~15 minutes, my phone bootlooped. I tried to re-flash the LPA23.12-39.7 software, but it bootlooped again.
So I performed a hard reset. AFter the hard reset, it bootlooped again and this error showed up: https://drive.google.com/file/d/0BzXaUzs8MoBWSWRWbnh2TG9VTVU/view
I can get to fastboot and Qualcomm Emergency Mode, but anything I have done so far will come back that flashing dead android doll. Any help please? Thanks.
Click to expand...
Click to collapse
Hello
I encounter exactly the same problem "flashing dead droid no command" after try to root with that method
I tryed to flash the stock rom but I could not down grade to that!
what have you found?? what did you do buddy plz tell me
---------- Post added at 04:04 PM ---------- Previous post was at 03:59 PM ----------
if anybody else should know what should I do to getaway that flashing dead droid plz tell me?
I try to flash the stock rom but I couldnt cuz of downgrade security problem!

Mohsen_zz said:
Hello
I encounter exactly the same problem "flashing dead droid no command" after try to root with that method
I tryed to flash the stock rom but I could not down grade to that!
what have you found?? what did you do buddy plz tell me
---------- Post added at 04:04 PM ---------- Previous post was at 03:59 PM ----------
if anybody else should know what should I do to getaway that flashing dead droid plz tell me?
I try to flash the stock rom but I couldnt cuz of downgrade security problem!
Click to expand...
Click to collapse
I've found this post really helpful
So after I did this first step (flash stock firmware via fastboot) I was able to overcome bootloop issue and install root
Hope this helps!

Blu Vivo 5R stock Roms

In case that someone will need it, here it is Blu stock rom BLU_V0090EE_V11.
Added new updated stock rom BLU_V0090UU_V25.
Added new stock rom BLU Vivo 5R V0090UU 7.0

mirozeman said:
In case that someone will need it, here it is Blu stock roms BLU_V0090EE_V11.
Click to expand...
Click to collapse
Hi mirozeman. Maybe you can help me...
It seems I misused the SP Flash Tool and my radio stopped working. Is there any way to fix it? Thanks!

Antipatiko said:
Hi mirozeman. Maybe you can help me...
It seems I misused the SP Flash Tool and my radio stopped working. Is there any way to fix it? Thanks!
Click to expand...
Click to collapse
I'm not sure how to fix the problem with radio. Did you try to reflash stock rom again or what did you do?

Hi,
Can you tell if there is any difference (like major updates) between the two ROM's?
Thanks.

do u flash via TWRP?

I am unable to flash this using TWRP.
Its missing the update script?
I think this ROM is not an update ROM I am guessing? And I already covered the original recovery with TWRP. What can I do to install the ROM?

2hdass said:
I am unable to flash this using TWRP.
Its missing the update script?
I think this ROM is not an update ROM I am guessing? And I already covered the original recovery with TWRP. What can I do to install the ROM?
Click to expand...
Click to collapse
Hi,
For flashing new rom, you need to use SP flash tool. I hope you know how to use SP flash tool, if not, learn how to use it first and then use SPflash.

Question
Why doesn't this new update appear on the automatic updates section on the phone?

Hello greetings I have flashed my blu vivo 5r and I lost the connection 4glte I only have 4g and it is intermittent it falls and again it is also slow I saw in the part of imei and it says unknown help me probe to change the imei or to place the original with different applications And none works for me thanks

rickyricardopr said:
Hello greetings I have flashed my blu vivo 5r and I lost the connection 4glte I only have 4g and it is intermittent it falls and again it is also slow I saw in the part of imei and it says unknown help me probe to change the imei or to place the original with different applications And none works for me thanks
Click to expand...
Click to collapse
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.

mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse
Thanks for replying when you say factory reset is IN wipe data / factory reset?
---------- Post added at 08:03 AM ---------- Previous post was at 07:29 AM ----------
mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse
It does not work install the v25 and I did the factory reset and it follows me in 4g and not in 4glte and the imei says unknown please help me thanks :crying:

You must do something wrong. Try it again.
Flash rom v25.
Start your phone and follow the setup (language=>wifi=>google account=>.......).
Now in your phone go to setting and find factory reset.
Reset your phone and reboot.
Don't use TWRP for factory reset, it wont work.

bothe storage?
Does it have bothe storage options? internal and portable?
mirozeman said:
Hi,
Try to flash newer update V25.
Use SP flash tool to flash the newer update. Let it run through the setup, and then factory reset.
Te problem should be fixed.
Click to expand...
Click to collapse

How To Use SPflash tool
Found this at link below with some factory ROMs, latest was V22. Good instruct on using the SP Flash tool. Sorry for the all caps, that's how I got it and I don't feel like retyping it.
https://www.needrom.com/download/blu-vivo-5r/
ONLY MT6753
——————————————————————————————————————————————————————–
Update Official ROM BLU Version: BLU_V0090UU_V22_GENERIC - full_gionee6753_65u_m0-user 6.0 MRA58K
Gapps include – No Rooted
Language support : Multilang
BEFORE Installing ROM : UNZIP ROM FILES YOU DOWNLOADED, WILL NOT LOAD FROM AN ARCHIVE LIKE MANY OTHER ANDROID SYSTEMS. AND YES, LIKE BELOW, ALL THIS HAPPENS WITH THE PHONE POWERED OFF-IT GETS WHAT EVER POWER IT NEEDS FROM THE USB CABLE, NO OS BOOTED UP LIKE OTHER ANDROID SYSTEMS. ie, RECOVERY, THIS WRITES STRAIGHT TO THE PHONE STORAGE AND MAKES THE PARTITIONS FROM YOUR PC FROM THE USB CABLE. HIGHLY RECOMMEND USING A USB PORT DIRECTLY ON THE COMPUTER, NOT FROM A USB HUB OR THROUGH ANY OTHER USB DEVICE.
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
---------- Post added at 09:13 AM ---------- Previous post was at 09:07 AM ----------
gtaber said:
Found this at link below with some factory ROMs, latest was V22. Good instruct on using the SP Flash tool. Sorry for the all caps, that's how I got it and I don't feel like retyping it.
https://www.needrom.com/download/blu-vivo-5r/
ONLY MT6753
——————————————————————————————————————————————————————–
Update Official ROM BLU Version: BLU_V0090UU_V22_GENERIC - full_gionee6753_65u_m0-user 6.0 MRA58K
Gapps include – No Rooted
Language support : Multilang
BEFORE Installing ROM : UNZIP ROM FILES YOU DOWNLOADED, WILL NOT LOAD FROM AN ARCHIVE LIKE MANY OTHER ANDROID SYSTEMS. AND YES, LIKE BELOW, ALL THIS HAPPENS WITH THE PHONE POWERED OFF-IT GETS WHAT EVER POWER IT NEEDS FROM THE USB CABLE, NO OS BOOTED UP LIKE OTHER ANDROID SYSTEMS. ie, RECOVERY, THIS WRITES STRAIGHT TO THE PHONE STORAGE AND MAKES THE PARTITIONS FROM YOUR PC FROM THE USB CABLE. HIGHLY RECOMMEND USING A USB PORT DIRECTLY ON THE COMPUTER, NOT FROM A USB HUB OR THROUGH ANY OTHER USB DEVICE.
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6753_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
Want to add, if you have TWRP installed, like I did, it will be gone and so will your root, this wipes the phone completely, just like new when finished. And since it works powered off, as long as you can get the phone to turn off, you can recover it. Excellent design feature, why can't they all do that, and give you a switch to allow unlocked boot loader in settings. You will need to re-root after doing above.

hello, what is the password for the file 7.0???
Thanks

Password is: www.stockrom.net

Hola. Algona contraseña para descomprimir el zip??

Is this new 7.0 stock rom aosp and/or rootable?

IMEI Restore
rickyricardopr said:
Thanks for replying when you say factory reset is IN wipe data / factory reset?
---------- Post added at 08:03 AM ---------- Previous post was at 07:29 AM ----------
It does not work install the v25 and I did the factory reset and it follows me in 4g and not in 4glte and the imei says unknown please help me thanks :crying:
Click to expand...
Click to collapse
Hey! To restore your IMEI you should use Maui META. You will need the stock Android 6.0 firmware (unzipped) as the program uses a file within the firmware. You do not need to flash the rom, just need it for the file. Your Imei should be on the original box that the phone came in. POWER OFF YOUR PHONE BEFORE DOING THIS OR ELSE IT WON'T WORK!!! Here is a tutorial: h t t p s : / / w w w . y o u t u b e . c o m / w a t c h ? v = V E Y V o D M 2 u H w (spaced because xda won't let me post links yet)

ZaggyWeedMaster7546 said:
Hey! To restore your IMEI you should use Maui META. You will need the stock Android 6.0 firmware (unzipped) as the program uses a file within the firmware. You do not need to flash the rom, just need it for the file. Your Imei should be on the original box that the phone came in. POWER OFF YOUR PHONE BEFORE DOING THIS OR ELSE IT WON'T WORK!!! Here is a tutorial: h t t p s : / / w w w . y o u t u b e . c o m / w a t c h ? v = V E Y V o D M 2 u H w (spaced because xda won't let me post links yet)
Click to expand...
Click to collapse
Does it necessarily have to be the Android 6.0 firmware, or you can use the new 7.0 as well?

[GUIDE] Full Root For Samsung Galaxy J5 Pro SM-J530F

Hello All ..
Today I show You How you can Full Root For Samsung Galaxy J5 Pro SM-J530F
Note
1. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
2.Follow all steps correctly otherwise it cause bootloop.
3. Must backup NVRAM using this Guide before Doing anything.​-----
Require tools and Files-
odin Download
SuperSu Download
twrp Download
Patched boot.img Download
-----
Part -1) Install twrp Recovery :
Step-1) First, enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>.
To enable Developer Options, go to About phone and tap the Build Number 7 times.
Step-2) Now download the Latest TWRP Recovery for your device.
Step-3) Now Download the Odin tool from above and extract the zip file.
Step-4) Run the Odin.exe file on your PC.
Step-5) Connect your Galaxy Device to your PC with the data cable and reboot into the Download/Odin mode.
Step-6) To enter into download mode turn off your phone and press and hold the ‘Home + Volume Down + Power’ buttons together until you see the download mode screen.
Step-7) Once you enter into Download mode, you see anID: COM port turned blue and Added message in Odin message box means your device has recognized by Odin.
Step-8) If ID: COM doesn’t show means your driver is not correctly installed or try it with different USB cable.
Step-9) Now locate and add the twrp–xxx.img.tar file (you downloaded from above) to the AP/PDA tab in Odin.
Step-10) Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“
Step-11) Now click ‘Start‘ button and it will start flashing the file. Wait until you see ‘Pass‘ in Green Color on Odin screen.
This step will Install TWRP Recovery On Your Samsung Device
12) Now Your device will automatically reboot. That’s it. You Install TWRP Recovery on Galaxy Device successfully.
----------
Part -2) Root :
Step 1. Download Supersu From above and Save it to Device Storage. [internal or external].
Step 2. Switch off Your Phone and Press Power and volume button to boot Your Device into twrp.
Step 3. On twrp Recovery Go to backup tab and create a nandroid backup, Must Select all partition’s including ESF.
Step 4. Go to wipe tab and Do a factory Reset. Don’t Select any System partition. otherwise it will erase it.
Step 5. Go to install tab, Locate Downloaded SuperSu.zip and Confirm Install, wait for Success Done.
Step 6. flash Patched boot.img if Present. ( in twrp )
Step 7 .Reboot System Now.
---------------------------------
So This is a Complete Guide to to Install twrp Recovery and Root Samsung Galaxy J5 Pro 2017 :good::fingers-crossed::laugh:​

Thanks

Step 6. flash Patched boot.img if Present. ( in twrp )
????????????
HELPPPP
türkçe biliyormusun ?

Can phone with network lock be rooted ?

djedjy said:
Can phone with network lock be rooted ?
Click to expand...
Click to collapse
Maybe u can try it
But getting unlocked will be nice

djedjy said:
Can phone with network lock be rooted ?
Click to expand...
Click to collapse
Yes
Sent from my Samsung Galaxy S8+ using XDA Labs

Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!

karcas said:
Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!
Click to expand...
Click to collapse
It works.. did it last day. ****ed up my camera and sounds nothing else

karcas said:
Hi!
Does this work with the dual sim version? (j530F/DS)
This low space available s**t is driving me mad, need to rooooooot!
Please confirm it works
Thank you!
Click to expand...
Click to collapse
use this Recovery : https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
then this Kernel : https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
and you should get Root

Nekrofiili said:
It works.. did it last day. ****ed up my camera and sounds nothing else
Click to expand...
Click to collapse
You mean rooting broke your camera and speaker? Can you be more specific?
Thanx
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
Nekrofiili said:
It works.. did it last day. ****ed up my camera and sounds nothing else
Click to expand...
Click to collapse
ksa616 said:
use this Recovery : https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
then this Kernel : https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
and you should get Root
Click to expand...
Click to collapse
Thank you very much. I'd love to try that i'm afraid to mess up.... phone is not mine but my company's....
@Nekrofiili said rooting broke his camera and speaker, do you think it's because of wrong kernel?

Confirmed working on j530f/DS (dual sim)
Thank you!

karcas said:
Confirmed working on j530f/DS (dual sim)
Thank you!
Click to expand...
Click to collapse
Which method did you use? The process from the main post or the one posted by @ksa616 on flashing the kernel?
---------- Post added at 12:54 PM ---------- Previous post was at 12:53 PM ----------
karcas said:
Confirmed working on j530f/DS (dual sim)
Thank you!
Click to expand...
Click to collapse
Which method did you use? The process from the main post or the one posted by @ksa616 on flashing the kernel?

I just followed the instruction in the main post and no issue, no need to flash a different kernel

What version of stock ROM should already be installed for this Rooting instructions to work? I am currently using PDA J530FXWU2AQL4 and CSC J530FOJV2AQL1. Will this work?

Asking
This is work for Samsung J530Y?

Stuck in TWRP 3.2.1-0
Hello All
I followed this thread to root my J5PRO. But when I reboot the system, I get back to the TWRP project screen again and again.
What can I do to get my phone back to use? Could you assist ?
Many thanks

usolidd said:
Hello All
I followed this thread to root my J5PRO. But when I reboot the system, I get back to the TWRP project screen again and again.
What can I do to get my phone back to use? Could you assist ?
Many thanks
Click to expand...
Click to collapse
I experienced the same problem, so I had to re-install the stock firmware via Odin. Just look for the stock firmware on the internet (for your phone- mine is J530F), then download Odin and flash it. The process is straightforward and available on the internet, especially YouTube.
Good luck.

Problem with recovery, now Boot-loop
Followed the instructions
When I tried to backup the phone, the storage spaces were all 0MB.
Then obtained error:
' Could not mount /data and unable to find crypto footer'
Now phone is stuck on bootloop.

s_forum said:
Followed the instructions
When I tried to backup the phone, the storage spaces were all 0MB.
Then obtained error:
' Could not mount /data and unable to find crypto footer'
Now phone is stuck on bootloop.
Click to expand...
Click to collapse
On j530F sometimes it has mount so you have to reboot recovery after some actions. At least for me

tutorial video :more zips added with Teamwinrecovery
Hello there
can make pls tutorial video how to make add more zips because this method very important and i dont want make bricks my phone

Too much battery drain

Im tried all roms. All kernals but still battery draining too fast on my spic mi 498h

Me tooo... i think batterty is dead

I really don't understand how or why but unfortunately my phone Micromax AQ4501 (ANDROID ONE) which was rooted in January 2017 by using Android one toolkit available at XDA , and since then I was using custom rom and many time I had changed it and recently I had installed Magisk while installing the rom via Custom Recovery Twrp 2.8.5 which was available with the Android One Toolkit but when after sometime when I decided to change my rom from Lineage 6.0.1 to AOSP and this time I actually forgot to wipe up and then straight away while installing first the error came that due to insufficient storage I can't install then when I did factory reset on TWRP it said can mount system, data....Etc.(can see image (
https://drive.google.com/folderview?id=1J1FqJdcJAuga75oUzkPnDc6_5sWU5h-b )) and said that the factory reset failed, then when I researched Youtube about this I got to know that I should format but this also gave me the same result so I really request to please suggest me a solution....

I think your flash memory is dead, a common problem with this phone .

Solution??
MihaiSG said:
I think your flash memory is dead, a common problem with this phone .
Click to expand...
Click to collapse
So no solution.....sir please I really want the device to get fixed as you see the twrp recovery is loading.....
---------- Post added at 02:59 PM ---------- Previous post was at 02:47 PM ----------
MihaiSG said:
I think your flash memory is dead, a common problem with this phone .
Click to expand...
Click to collapse
One thing more that earlier when this problem occurred in the mount option the system was ticked but after seeing some YouTube videos I had tried to repair the system partion but changing and rechanging it after which the tick which was present on system also vanished in the mount option as like others and cant it be problem with the version of twrp and then how can I install new version of twrp recovery... Sir please I really want the solution please see as you are Pro.......