Database Develop

i have trouble flashing cwm through Odin

Hi guys,
i m having trouble flashing cwm on my phone. Really need your opinions.
Using;
Odin v3.09
Latest USB drivers
philz_touch_6.48.4-n7000
The error i get in odin;
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone changes on my phone screen, actually nothing changes in screen. Just the below is written;
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: YES (5 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
DOWNLOADING
DO NOT TURN OFF TARGET
My phone information;
GT-N7000
4.1.2
N7000XXLT3
3.0.31-1103517
[email protected]#3
SMP PREEMPT ....KST 2013
JZO54K.N7000XXLTC

Your flashing the wrong file. Flash the Philz file that corresponds yo your build number. All these instructions are THOROUGHLY described in the OP of the Philz thread.
Sent from my Nexus 5 using Tapatalk

And also try flashing the zip file in stock recovery instead of odin vers. Phils has made it clear that it can be flashed directly in stock recovery without raising binary counter.
Sent from my GT-N7000 using XDA Free mobile app

Help Root or downgrade Galaxy S5 G870A AT&T on 5.0

I have a Galaxy S5 Active SM-G870A AT&T on 5.0 Baseband G870AUCU2B0F2
Build LRX21T.G870AUCU2B0F2
Andoid Version: 5.0 Knox 2.3
SIM status: Factory unlocked
When I try to follow some guides on XDA to downgrade to 4.4.x I got odin error that the file can not be written.
Is is possible that the Firwmare is locked down?
http://forum.xda-developers.com/general/xda-assist/help-root-downgrade-galaxy-s5-g870a-att-t3173343/post62209482#post62209482
Got this error message when downgrading with Odin 3.10.6 and G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have exactly the Firmware Build number: LRX21T.G870AUCU2BOF2 released on July 16. 2015
URL="http://www.att.com/esupport/article.jsp?sid=KB425050&cv=820"]http://www.att.com/esupport/article.jsp?sid=KB425050&cv=820[/URL]

ps32412 said:
I have a Galaxy S5 Active SM-G870A AT&T on 5.0 Baseband G870AUCU2B0F2
Build LRX21T.G870AUCU2B0F2
Andoid Version: 5.0 Knox 2.3
SIM status: Factory unlocked
When I try to follow some guides on XDA to downgrade to 4.4.x I got odin error that the file can not be written.
Is is possible that the Firwmare is locked down?
http://forum.xda-developers.com/gen...-g870a-att-t3173343/post62209482#post62209482
Got this error message when downgrading with Odin 3.10.6 and G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have exactly the Firmware Build number: LRX21T.G870AUCU2BOF2 released on July 16. 2015
URL="http://www.att.com/esupport/article.jsp?sid=KB425050&cv=820"]http://www.att.com/esupport/article.jsp?sid=KB425050&cv=820[/URL]
Click to expand...
Click to collapse
As far as I know OF2 can not be downgraded. Once on OF2 bootloader your stuck there.

nutt_case said:
As far as I know OF2 can not be downgraded. Once on OF2 bootloader your stuck there.
Click to expand...
Click to collapse
Ok thank you for the clear answer. In that case time to sell it.

what you end up doing?

One way tell is do @ prompt.
getprop ro.bootloader
Then see what out put is.
Sent from my SAMSUNG-SM-G870A using Tapatalk

Samsung SM-G900A stuck in Odin Mode with UDC start - Tried Everything!

So I was rooting or flashing my phone (not really sure I'm fully qualified to do these things now) and I think while using Odin I unplugged the usb and so now my phone just says
ODIN MODE
PRODUCT NAME: SM-G900A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK (KK): ON
KNOX WARRANTY: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
and in the middle it says
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I've read a million threads that are all very similar but nothings worked. I've tried to use Kies 3 but it doesnt recognize my phone. I tried to go to the Firmware Upgrade and Initialization and it doesnt know my model number.
I've tried using the G900A_Downgrade_to_NCE.tar.md5 in Odin but it was a FAIL. I tried using G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 in Odin but it was a FAIL.
I tried using the instructions from http://forum.xda-developers.com/showthread.php?t=2785363 but it is still a FAIL.
When I use Odin it says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And my phone says:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
So please lay on me your awesome wisdom please. Thank you.

Only thing left to do is try flashing the stock partitions through Odin.
https://www.androidfilehost.com/?fid=95916177934554805

Hmm i'll give it a try. Thanks!

Mine stuck on samsung logo now after flashing this file any help

N900A Complicated hard brick help.

My phone is SM-N900A
First of all, I didn't know that it was rooted then when I downloaded the latest updates it was un-rooted.
Because I'm ignorant and didn't know what to do, I tried re-rooting it via KINGO. But, it always fail at 90%
I always get this problem in my ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
The next thing I did was skipped the procedure and tried rooting it thus, resulting to my phone being hard bricked.
Afterwards, I downloaded the stock rom for my phone so that I could try un-bricking it.
However, when I try to flash it with stock rom It kept failing and getting the same results ODIN SW REV CHECH FAIL : [sbl1]Fused 2 > Binary 1
So, what should I do now? I really love this phone and I want to unbrick it then re-root it again.
Would you guys help me in this complicated failure of mine.
Here's the Odin text:
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What ROM was on your phone before flashing? Did you confirm the model # in download mode?

audit13 said:
What ROM was on your phone before flashing? Did you confirm the model # in download mode?
Click to expand...
Click to collapse
My ROM was for N900A Android 5.0
Model # do you mean the product name? If it is, it says SM-N900A.
ODIN MODE
PRODUCT NAME: SM-N900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
SECURE DOWNLOAD : ENABLE
UDC START
This what it says in Odin mode

Did you try using different USB cables and all available USB ports?

audit13 said:
Did you try using different USB cables and all available USB ports?
Click to expand...
Click to collapse
I'll try using different cable and ports.
But, if it still didn't work, what do you think its problem?
Can it be fixed?
* I tried every usb ports and cable I have, it is 5 to be exact but I still get the same results.

Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?

audit13 said:
Did you get the ROM from samsung-updates.com or sammobile.com? It's the latest ROM for the phone?
Click to expand...
Click to collapse
It's the latest ROM Android 5.0

The latest ROM I see for the sm-n900a is only 4.3: http://www.sammobile.com/firmwares/database/SM-N900A/

AT&T NOTE 5 flash to T-Mobile Version - Secure Check FAIL: (BOOTLOADER)

Hello! I am new to XDA.
I moved carriers from AT&T to T-Mobile. I am attempting to install T-Mobile's ROM on an AT&T Galaxy Note 5 SM-N920A in order to address some issues that I have had with Wi-Fi Calling, and phone call quality. I don't want ROOT or any other customizations. Just stock T-Mobile Android 7.0. I have been attempting to use the following ROM's
N920TUVU4EQG3_N920TTMB4EQG3_N920TUVU4EQG3_HOME.tar .md5
N920TUVU4EQJ3_N920TTMB4EQJ3_N920TUVU4EQJ3_HOME.tar.md5
I am receiving the same error on the phone during the flash attempt "Secure Check Fail: (bootloader)
Running ODIN 3.12.10 as Admin
Installed Samsung USB drivers
USB Debugging is checked.
I performed the firmware swap with my Galaxy S7 with no problems. There were 4 files in the Zip when I did that process (each dropped in ODIN path's BL, AP, CP, and CSC), but I could not find these 4 for my Note5. Each time I downloaded from Updato or SamMobile there was only on "Ap" file. Is that the issue?
PHONE SCREEN TEXT:
Odin Mode
Download Speed: Fast
Product Name: SM-N920A
Current Binary: Samsung Official
System Status: Official
FAP LOCK: Off
SECURE DOWNLOAD: Enabled
Knox Warranty Void: 0
RP SWREV: B:4 K:0 S:1
Secure Check Fail: (Bootloader)
ODIN OUTPUT:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Successfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1210)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialization..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Any Suggestions? Thanks in advance!

i have the same problem