I'm using CM13 but can't get the speakerphone to work.
Is it possible to get the speakerphone to work?
Am I the only one that has this issue? Maybe no one uses the speakerphone and just hasn't noticed?
I tried a proposed solution of changing something in build props from digital to analog but that didn't work.
csmall said:
Am I the only one that has this issue? Maybe no one uses the speakerphone and just hasn't noticed?
I tried a proposed solution of changing something in build props from digital to analog but that didn't work.
Click to expand...
Click to collapse
I assume you mean speakerphone for calling. For it to work your gpt and modem partitions needs to be on the one for lollipop unless you have a phone like me and had no official lollipop OTA released. However there is a solution. But hey I could be wrong. Post back and let me know.
Sent from my Moto X using Tapatalk
Yes the speakerphone for calls.
My bootloader is unlocked.
csmall said:
Yes the speakerphone for calls.
My bootloader is unlocked.
Click to expand...
Click to collapse
I seen that after I replied so I edited it. Anyway. What model of the X?
Sent from my Moto X using Tapatalk
XT1053
csmall said:
XT1053
Click to expand...
Click to collapse
What Android version are you coming from?
Sent from my Moto X using Tapatalk
It may have been 5 but I can't recall.
csmall said:
It may have been 5 but I can't recall.
Click to expand...
Click to collapse
Did you ever take the stock 5.1 update? If not, flashing the gpt and modem should do the trick.
Sent from my Moto X using Tapatalk
It was up to date but I don't think it was at 5.1.
Where would I get those files to flash?
I come from stock 4.4.2(latest for my variant) then I found out I could flash the Verizon gpt.bin and non-hlos.bin and speakerphone worked again. However I suggest you try one of the xt1053 modem and gpt. Possibly xt1058.
-Remember I'm not responsible if you brick your phone-
Sent from my Moto X using Tapatalk
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
csmall said:
It was up to date but I don't think it was at 5.1.
Where would I get those files to flash?
Click to expand...
Click to collapse
Firmware files are here => https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/
And also here => https://androidfilehost.com/?a=show&w=files&flid=44728
Sent from my Moto X using Tapatalk
---------- Post added at 10:36 PM ---------- Previous post was at 10:32 PM ----------
I forgot about this http://forum.xda-developers.com/moto-x/development/xt1053-retail-stock-lollipop-flashable-t3155843 it has just what you need unless you want to download the whole XML file.
Sent from my Moto X using Tapatalk
-I am NOT responsible for any damages that may occur-
Thanks man! It took some playing around but I finally got the modem and gpt flashed.
After that took a dalvik cache wipe to get the cellular radio to work again but after that the phone and speaker work!
csmall said:
Thanks man! It took some playing around but I finally got the modem and gpt flashed.
After that took a dalvik cache wipe to get the cellular radio to work again but after that the phone and speaker work!
Click to expand...
Click to collapse
That's awesome dude. Glad I could help.
Sent from my Moto X using Tapatalk
-I am NOT responsible for any damages that may occur-
Related
Hi, my RAZR i is stuck on 81.5.29004.XT890.Retail.en.GB which is actually older than what they seem to be shipping with. Any ideas?
Thanks.
The idea is...
addam360 said:
Hi, my RAZR i is stuck on 81.5.29004.XT890.Retail.en.GB which is actually older than what they seem to be shipping with. Any ideas?
Thanks.
Click to expand...
Click to collapse
Yes, Motorola is a lazy ass company, Welkome
xopendaz said:
Yes, Motorola is a lazy ass company, Wekome
Click to expand...
Click to collapse
Hahahaha:laugh:
Just bumping this because I'm still on this firmware version and I'm now certain that it is OLDER THAN THE FIRST BATCH OF UK RAZR IS! This seems like a fairly major issues now.:crying:
addam360 said:
Just bumping this because I'm still on this firmware version and I'm now certain that it is OLDER THAN THE FIRST BATCH OF UK RAZR IS! This seems like a fairly major issues now.:crying:
Click to expand...
Click to collapse
Flash the full RTGB 81.5.31002 xml.zip in RSD lite. You ARE a forgotten versions of Christmas past and you won't get updates on that I am fairly sure.
Sent from my MB886 using Tapatalk 2
There's the 39001 GB Fastboot already. No need 4 OTA anymore :thumbup:
Sent from my XT890
---------- Post added at 02:00 AM ---------- Previous post was at 01:57 AM ----------
http://forum.xda-developers.com/showthread.php?p=35177578
Sent from my XT890
HSD-Pilot said:
There's the 39001 GB Fastboot already. No need 4 OTA anymore :thumbup:
Sent from my XT890
---------- Post added at 02:00 AM ---------- Previous post was at 01:57 AM ----------
http://forum.xda-developers.com/showthread.php?p=35177578
Sent from my XT890
Click to expand...
Click to collapse
I found that file
*Proud of myself*
Yeah, again the Man of da Leaks, like in good old RazR days
Well done!
mattlgroff said:
Flash the full RTGB 81.5.31002 xml.zip in RSD lite. You ARE a forgotten versions of Christmas past and you won't get updates on that I am fairly sure.
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. No idea how I acquired a pre-release software version but I would've unlocked bootloader soon enough anyway.
Was working fine a few weeks ago, now it tells me to call big red, and I can't think of anything I've done that should have caused this to happen.
Anyone have a solution or should I be looking for an app?
sent from my Moto X using Tapatalk
chipk said:
Was working fine a few weeks ago, now it tells me to call big red, and I can't think of anything I've done that should have caused this to happen.
Anyone have a solution or should I be looking for an app?
sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
Look at settings and see if you're on 4.4.2 or 4.4
4.4.2
sent from my Moto X using Tapatalk
chipk said:
4.4.2
sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
The 4.4.2 broke root and overwrote your tethering mod. read the thread below
http://forum.xda-developers.com/moto-x/moto-x-qa/-t2702982
http://forum.xda-developers.com/mot...-4-4-4-4-2-t2709239/post51715805#post51715805
If you have an unlocked bootloader, it's easy to enable hotspot again.
motoxone said:
If you have an unlocked bootloader, it's easy to enable hotspot again.
Click to expand...
Click to collapse
What does unlocking process involve? Ive heard there is a code.. and if you get the code does it work for every x or just yours..
---------- Post added at 12:57 AM ---------- Previous post was at 12:53 AM ----------
I guess all are able to be unlocked not just dev versions.. i will hook my usb cable to my laptop and start entering random numbers into the unlocking code hole thingy and get mine unlocked.. just like the bobbypin in a master lock
I just had to install xposed and we're working again, should have never happened in the first place though!
Sent from my Nexus 7 using Tapatalk
So yours is unlocked.. that makes a big difference
I got the code from the chinese middle-man back when it was available, but now it's not possible. I have the standard Moto X, not DE.
doitinthedirt said:
What does unlocking process involve? Ive heard there is a code.. and if you get the code does it work for every x or just yours..
---------- Post added at 12:57 AM ---------- Previous post was at 12:53 AM ----------
I guess all are able to be unlocked not just dev versions.. i will hook my usb cable to my laptop and start entering random numbers into the unlocking code hole thingy and get mine unlocked.. just like the bobbypin in a master lock
Click to expand...
Click to collapse
Does anybody have the moto x 4.4.3 system dump file I want to have it as I don't know when my moto x will get 4.4.3
Sent from my XT1058 using XDA Premium 4 mobile app
joejoejo said:
Does anybody have the moto x 4.4.3 system dump file I want to have it as I don't know when my moto x will get 4.4.3
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah even i would appreciate it if someone could give us a system dump and boot..
Anybody got it yet
Sent from my XT1058 using XDA Premium 4 mobile app
You need to specify your model. There's many.
---------- Post added at 06:54 PM ---------- Previous post was at 06:54 PM ----------
Maybe edit title thread too with model.
Carrier I mean. Not just 1058.
KJ said:
You need to specify your model. There's many.
---------- Post added at 06:54 PM ---------- Previous post was at 06:54 PM ----------
Maybe edit title thread too with model.
Carrier I mean. Not just 1058.
Click to expand...
Click to collapse
No no what we want is the 4.4.3 System and boot of xt1053... Cuz that's the only varient that has it now...
Gundabolu SC said:
No no what we want is the 4.4.3 System and boot of xt1053... Cuz that's the only varient that has it now...
Click to expand...
Click to collapse
Why flash different carriers firmware. Soon you'll have it for yours....and no issues. 4.4.3 is a minor update...nothing terribly exciting. Certainly not much more than 4.4.2 is.
But....to each their own.
We don't want to flash it we want to have the system dump
Sent from my XT1058 using XDA Premium 4 mobile app
Somebody who has 4.4.3 please do a system dump thanks
Sent from my XT1058 using XDA Premium 4 mobile app
Please
Sent from my XT1058 using XDA Premium 4 mobile app
Here is the thread were the system dump is. The file name is tmo_4.4.3_flashable.zip http://forum.xda-developers.com/showthread.php?t=2773675
Sent from my XT1058 using XDA Premium 4 mobile app
Help for XT 1058 4.4.3 system update
Hi, I need some help here. I just received 4.4.3 OTA for Brasil Retail XT1058, I just choosed Accept and it downloaded and tried to install but it just reboot to Recovery (teamwin) and nothing happened. I rebooted and system was still 4.4.2, and is looping shooting down I guess trying to install the update. I remembered that I should have stock recovery or something, but I can't remember what else should I do to get the update. Maybe if somebody helps me, I could try to get the system dump for the XT1058.
Thank you!!
Traukoman said:
Hi, I need some help here. I just received 4.4.3 OTA for Brasil Retail XT1058, I just choosed Accept and it downloaded and tried to install but it just reboot to Recovery (teamwin) and nothing happened. I rebooted and system was still 4.4.2, and is looping shooting down I guess trying to install the update. I remembered that I should have stock recovery or something, but I can't remember what else should I do to get the update. Maybe if somebody helps me, I could try to get the system dump for the XT1058.
Thank you!!
Click to expand...
Click to collapse
You need to disable Xposed if you have installed it. If you have made any changes to SYSTEM, or removed any "bloat" apps, you will need to un-do these changes. You are correct that you need STOCK recovery. You can download the SBF here: http://sbf.droid-developers.org/phone.php?device=0 (get the correct one for your model, version 4.4.2)
Now extract the file. You only need one file: recovery.img
Use mfastboot to flash the stock recovery:
mfastboot flash recovery recovery.img
Then you should be able to flash the OTA without failure.
Good Luck
Hello,
I have one question. I have bought a ATT Moto X and flashed it with these instructions to a Herman Moto X.
http://forum.xda-developers.com/moto-x/development/update-xt1058-to-android-4-4-2-uk-t2628381
Now i am in 4.4.2 and i want 4.4.4. But i cant take the German OTA because i think the phone will brick.
How i geht to 4.4.4. German?
My idea is : flash back to ATT 4.4.2, take OTA 4.4.4 and the flash back to German with 4.4.4. Stock
Is this the right way???
Thanks a lot
Sven
*
Just flash this german 4.4.4. There won't be a problem with a brick.
http://www.filefactory.com/file/66d..._4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml.zip
Sent from my XT1058 using Tapatalk
No Brick!! But what is with the modem??? Must i delete the lines from the modem how the guy in the instruction die??
AGISCI said:
Just flash this german 4.4.4. There won't be a problem with a brick.
http://www.filefactory.com/file/66d..._4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml.zip
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
How should i flash this???
You only need to remove them if your model uses different frequencies in your country.
Sent from my XT1058 using Tapatalk
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
If you plan to remove those lines, use fastboot and mfastboot. If you plan to flash the modem use rsd lite.
Sent from my XT1058 using Tapatalk
AGISCI said:
Just flash this german 4.4.4. There won't be a problem with a brick.
http://www.filefactory.com/file/66d..._4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml.zip
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
No Brick!! But what is with the modem??? Must i delete the lines from the modem how the guy in the instruction says??
As I said it depends on your model. If you have the same frequencies it is not necessary. If the frequencies are different then it is necessary.
Sent from my XT1058 using Tapatalk
AGISCI said:
You only need to remove them if your model uses different frequencies in your country.
Sent from my XT1058 using Tapatalk
---------- Post added at 10:37 AM ---------- Previous post was at 10:36 AM ----------
If you plan to remove those lines, use fastboot and mfastboot. If you plan to flash the modem use rsd lite.
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
OK i dekete the modem lines and flash with fastboot!! Is this correct???
Is my bootloader after flashing 4.4.4. Or the old one??? Or doesnt matter??
Sorry about the silly questions but i dont wont brick
Greets from Germany
Hi.
I ****ed up. I tried to restore my Moto X to factory defaults following the instructions found here(http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657) and everything went wrong. My phone was soft bricked. I managed to save it using the windroid tool (flashed recovery, in recovery flashed CM12) but when I booted I couldn't enable wifi and my sim card wasn't being detected.
I don't know what to do. I'm in over my head. I need help. I tried reflashing the rom, but that didn't work. I might suck at searching but I couldn't find anything that worked in the forum. Does anyone have any ideas?
Thanks in advance,
Jeremy
(it's past midnight here so I might not be here to answer any questions for a few hours. sorry!)
Lavitt said:
Hi.
I ****ed up. I tried to restore my Moto X to factory defaults following the instructions found here(http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657) and everything went wrong. My phone was soft bricked. I managed to save it using the windroid tool (flashed recovery, in recovery flashed CM12) but when I booted I couldn't enable wifi and my sim card wasn't being detected.
I don't know what to do. I'm in over my head. I need help. I tried reflashing the rom, but that didn't work. I might suck at searching but I couldn't find anything that worked in the forum. Does anyone have any ideas?
Thanks in advance,
Jeremy
(it's past midnight here so I might not be here to answer any questions for a few hours. sorry!)
Click to expand...
Click to collapse
Why are you following a guide for the moto G? What phone model do you have? If you're flashing moto G images that certainly won't work. If you have the PE then flash the images off the moto web page. The 5.0 images are posted so you shouldn't have issues with downgrading. If you have another model there are guides and images in this, the moto x, forum for that.
Sent from my XT1095 using Tapatalk
kcustom11 said:
Why are you following a guide for the moto G? What phone model do you have? If you're flashing moto G images that certainly won't work. If you have the PE then flash the images off the moto web page. The 5.0 images are posted so you shouldn't have issues with downgrading. If you have another model there are guides and images in this, the moto x, forum for that.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply.
I found the guide in the faq stickied in the help forum. Guess I wasn't thinking. Do you thinking following a different guide will solve my problem?
Lavitt said:
Thanks for the reply.
I found the guide in the faq stickied in the help forum. Guess I wasn't thinking. Do you thinking following a different guide will solve my problem?
Click to expand...
Click to collapse
What model phone?
Sent from my XT1095 using Tapatalk
kcustom11 said:
What model phone?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Moto x 2014 xt1097
Lavitt said:
Moto x 2014 xt1097
Click to expand...
Click to collapse
There are a bunch. Is the bootloader unlocked? What country? What version were you on before you flashed CM? You need to find the images for your particular device.
Sent from my XT1095 using Tapatalk
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=ASC&show=25&page=5
There are a bunch here.
Sent from my XT1095 using Tapatalk
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693
You can convert your phone to a PE if you want. If not just use his instructions and flash your version you found on the previous link. Then you can flash back to CM.
Sent from my XT1095 using Tapatalk
kcustom11 said:
There are a bunch. Is the bootloader unlocked? What country? What version were you on before you flashed CM? You need to find the images for your particular device.
Sent from my XT1095 using Tapatalk
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=filename&order=ASC&show=25&page=5
There are a bunch here.
Sent from my XT1095 using Tapatalk
---------- Post added at 02:18 PM ---------- Previous post was at 02:15 PM ----------
http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693
You can convert your phone to a PE if you want. If not just use his instructions and flash your version you found on the previous link. Then you can flash back to CM.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
You're a life saver! I could kiss you! Can I buy you a beer or something? If it wasn't for you I'd have a useless phone!