Does XT1079 has qpst rom? - Moto G 2014 LTE Q&A, Help & Troubleshooting

Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?

EAimTY said:
Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?
Click to expand...
Click to collapse
No.

Related

One bricked phone (partition table)

Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
QHSUSB_DLOAD = hard brick, off to repair
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
Dear, what you did with your phone, only i need to know

QHSUSB_BLUK on LG D415

Hi. I have some huge problem with my LG D415. It doesn't boot any more. When I plug it into my computer, it just shows QHSUSB_BLUK in device manger..Can someone help me please ?
wesson12 said:
Hi. I have some huge problem with my LG D415. It doesn't boot any more. When I plug it into my computer, it just shows QHSUSB_BLUK in device manger..Can someone help me please ?
Click to expand...
Click to collapse
You have your phone bricked, check my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
neverdies said:
You have your phone bricked, check my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Click to expand...
Click to collapse
This guide didn't help me at all...The Qualcomm driver (Qualcomm HS-USB QDLOADER 9008(COM3) is installed but the b2b tool can't find it. It is saying the phone is not in DLOAD Mode
wesson12 said:
This guide didn't help me at all...The Qualcomm driver (Qualcomm HS-USB QDLOADER 9008(COM3) is installed but the b2b tool can't find it. It is saying the phone is not in DLOAD Mode
Click to expand...
Click to collapse
Did you choose the right Com Port(3) in b2b?
neverdies said:
Did you choose the right Com Port(3) in b2b?
Click to expand...
Click to collapse
YEs I did ..

WF Swift is hardbricked. Help me unbrick please!!!

Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Connect phone to computer.
Take off battery. And wait.
Is your pc can detect your device on bootloader mode?
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Or google "Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 (if you have the right kind of rom)"
And use that method.
Yes
nhmanas said:
Is your pc can detect your device on bootloader mode?
Click to expand...
Click to collapse
My pc sees the phone in QDLoader 9008 mode
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
I don't know what that is but flash stock rom again via fastboot
General Mobile 4G Dual cihazımdan Tapatalk kullanılarak gönderildi
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
I shall try but I pray it works. I am literally stuck in Android Development without my phone, Emulators aren't good enough
My dear sir you are a freaking genius
You my friend are a genius. I dont know where you acquired these files. It works like brand new. Thank you sir. Thank you thank you thank you!!!!!!!!!!!!!!!!
One Problem.
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
The phone wont turn on with battery in. It only turns on when I use usb without battery
yasteellutch said:
The phone wont turn on with battery in. It only turns on when I use usb without battery
Click to expand...
Click to collapse
Try flash stock rom via fastboot from here
http://builds.cyngn.com/factory/crackling/cm-12.1-YOG4PAS33J-crackling-signed-fastboot.zip
FindYanot said:
Open https://cloud.mail.ru/public/NExC/qxFwsmmmV/Wileyfox Swift/Recover SW/
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction https://mega.nz/#!YUFiXRwI!PlPCplXY31Rje57IfmWucTbRY6d56nSU6de46cQxIqU
Click to expand...
Click to collapse
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
dabotsonline said:
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
Click to expand...
Click to collapse
Would you mind posting those files, why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Sent from my SM-N920I using Tapatalk
hmsq said:
... why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Click to expand...
Click to collapse
I have those files as well, and get the same problem even when removing the battery.
hmsq said:
Would you mind posting those files...
Click to expand...
Click to collapse
Will do when I have a chance!

My General Mobile 4G Bricked! Please help me!

Please may your help me. My PC sees it as Qualcomm HS-USB QDLoader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my English. Thanks!
Flash stock rom
tigone said:
please may your help me. My pc sees it as qualcomm hs-usb qdloader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my english. Thanks!
Click to expand...
Click to collapse
flash via fastboot stock rom's your phone is fasboot mode
TigOne said:
Please may your help me. My PC sees it as Qualcomm HS-USB QDLoader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my English. Thanks!
Click to expand...
Click to collapse
QFIL - Rom flasher can help you. If you understand russian, you can use this like for unbricking the phone
http://4pda.ru/forum/index.php?s=&showtopic=780325&view=findpost&p=52237044

Question Zenfone 8 bricked

Hey everyone,
yesterday my zenfone 8 just shutdown without any sign of a problem before . i thought its nothing but since then it dosnt turn on !!!
my only hope is when i connected it to my pc i got qualcomm 900e , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update.
but still no fastboot no nothing.
i understand there is a way with qfil tool but i dont know how to get the files for it. any help please???
i see that qfil can fix it with rawdata and patch0 but i dont have this files. can some one please help???
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
AzimBahar said:
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
Click to expand...
Click to collapse
Hey azim , i downloaded the files but it seems it knows that i am on 900e even when i tries to use other drivers to be 9008. can you please assits how to get out of 900e?? btw i managed to get the files out of my device but sahara server failed because of 900e :/
Connect phone to pC using test point and follow guides
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
AzimBahar said:
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
Click to expand...
Click to collapse
I dont understand what i need to do . I even tried with edl cable but still stuck on 900e
Once try to uninstall USB Driver & install ASUS QCOM Driver.
As you said , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update
Click to expand...
Click to collapse
After try again !
Note - You May use EDL Cable for EDL mode !
AzimBahar said:
Once try to uninstall USB Driver & install ASUS QCOM Driver.
After try again !
Note - You May use EDL Cable for EDL mode !
Click to expand...
Click to collapse
I tried with edl cable... Only test point left to find
duduhayo said:
I tried with edl cable... Only test point left to find
Click to expand...
Click to collapse
sir i have the same issues, are you know the test point right now?
Kiyori said:
sir i have the same issues, are you know the test point right now?
Click to expand...
Click to collapse
Hey, i wish. No one found it, I am still waiting for the one

Categories

Resources