Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
QHSUSB_DLOAD = hard brick, off to repair
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
Dear, what you did with your phone, only i need to know
Related
HI guys, i have a problem,I have installed a boot image but it was not correct and my smart phone no longer turns on does nothing and when I connect to the pc I get qualcomm hs-usb 9008 and nose to do, I read that the program qualcomm can be repaired but I do not have much experience, could help me please
Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1
AngelFRANTIX said:
Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1
Click to expand...
Click to collapse
it depends how it happened
a) you were flashing firmware, then do this: http://forum.xda-developers.com/showthread.php?t=2770684
b) it happened by itself (ie you weren't flashing things) -> hard brick, off to repair / get a new phone
nkk71 said:
it depends how it happened
a) you were flashing firmware, then do this: http://forum.xda-developers.com/showthread.php?t=2770684
b) it happened by itself (ie you weren't flashing things) -> hard brick, off to repair / get a new phone
Click to expand...
Click to collapse
watched the movie.. after... charge finish
phone will not turn on
no led light
no vibration
no feel
AngelFRANTIX said:
watched the movie.. after... charge finish
phone will not turn on
no led light
no vibration
no feel
Click to expand...
Click to collapse
phone is dead, sorry
send it to repair
AngelFRANTIX said:
Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1
Click to expand...
Click to collapse
I got the same problem with stock RUU, when trying to repair booting in recovery
Help.....
Hi there.
I am trying to breath life back into my HTC M7,
I have gotten as far as running revive file, but it asks for a phone password.
is there anyway around this - i dont know of any password on this phone.
Help please.
Hello!
The same problem with my M7. Qualcomm HS-USB Qdloader 9008,
I got it in such a way that I was not known with him! The idea was updated by air.
I'm ready to try to raise it via Linux, BUT !!!
Nowhere can I download the required archive, everywhere or deleted or broken links.
Share the archive under Linux if you do not mind PLEASE !!!!
Scorpion23 said:
Hello!
The same problem with my M7. Qualcomm HS-USB Qdloader 9008,
I got it in such a way that I was not known with him! The idea was updated by air.
I'm ready to try to raise it via Linux, BUT !!!
Nowhere can I download the required archive, everywhere or deleted or broken links.
Share the archive under Linux if you do not mind PLEASE !!!!
Click to expand...
Click to collapse
https://mega.nz/#!ZIkFzBCK!utAywqcT64EStjGyQHfqarE8iE1rcoTkQuH5FCYXJCc
Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.
Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.
Click to expand...
Click to collapse
Thank you so much. I will try. As far as I know, the body left in the down after the update by air. There is no more information. The former owner does not know what is Ctrl + Alt + Del so, the option that there is poured something unnecessary disappears) Only an update on the air. Let's hope for the best)
alray said:
https://mega.nz/#!ZIkFzBCK!utAywqcT64EStjGyQHfqarE8iE1rcoTkQuH5FCYXJCc
Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.
Click to expand...
Click to collapse
i bricked it by wrong software ..
how can i use this software .. is there is any manual ?
aamszia said:
i bricked it by wrong software ..
how can i use this software .. is there is any manual ?
Click to expand...
Click to collapse
Guide is linked at post #2
alray said:
Guide is linked at post #2
Click to expand...
Click to collapse
will this be working on windows or Ubuntu ?
aamszia said:
will this be working on windows or Ubuntu ?
Click to expand...
Click to collapse
Ubuntu
Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?
EAimTY said:
Help! My device has bricked when I partition system. Now the phone can only show Qualcomm 9008 port when connect to computer. So I thought only qpst can help it, but Does XT1079 has a qpst ROM?
Click to expand...
Click to collapse
No.
how unbrick Asus Zenfone Go X104D ?
in pc just Qualcom HS-USB QDLoader 9008 disk drive not detect
help plz?
'X - StREezZ' said:
how unbrick Asus Zenfone Go X104D ?
in pc just Qualcom HS-USB QDLoader 9008 disk drive not detect
help plz?
Click to expand...
Click to collapse
You have MPRG8974.mbn and 8974_msimage.mbn in your stock rom.
Ashwinrg said:
You have MPRG8974.mbn and 8974_msimage.mbn in your stock rom.
Click to expand...
Click to collapse
nope
i have raw image but can't extact with 7zip
Hey everyone,
yesterday my zenfone 8 just shutdown without any sign of a problem before . i thought its nothing but since then it dosnt turn on !!!
my only hope is when i connected it to my pc i got qualcomm 900e , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update.
but still no fastboot no nothing.
i understand there is a way with qfil tool but i dont know how to get the files for it. any help please???
i see that qfil can fix it with rawdata and patch0 but i dont have this files. can some one please help???
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
AzimBahar said:
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
Click to expand...
Click to collapse
Hey azim , i downloaded the files but it seems it knows that i am on 900e even when i tries to use other drivers to be 9008. can you please assits how to get out of 900e?? btw i managed to get the files out of my device but sahara server failed because of 900e :/
Connect phone to pC using test point and follow guides
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
AzimBahar said:
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
Click to expand...
Click to collapse
I dont understand what i need to do . I even tried with edl cable but still stuck on 900e
Once try to uninstall USB Driver & install ASUS QCOM Driver.
As you said , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update
Click to expand...
Click to collapse
After try again !
Note - You May use EDL Cable for EDL mode !
AzimBahar said:
Once try to uninstall USB Driver & install ASUS QCOM Driver.
After try again !
Note - You May use EDL Cable for EDL mode !
Click to expand...
Click to collapse
I tried with edl cable... Only test point left to find
duduhayo said:
I tried with edl cable... Only test point left to find
Click to expand...
Click to collapse
sir i have the same issues, are you know the test point right now?
Kiyori said:
sir i have the same issues, are you know the test point right now?
Click to expand...
Click to collapse
Hey, i wish. No one found it, I am still waiting for the one