HI guys, i have a problem,I have installed a boot image but it was not correct and my smart phone no longer turns on does nothing and when I connect to the pc I get qualcomm hs-usb 9008 and nose to do, I read that the program qualcomm can be repaired but I do not have much experience, could help me please
Related
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
QHSUSB_DLOAD = hard brick, off to repair
InferikII said:
Hello!
So, i have HTC One (PN07200) with broken partition table. :crying:
As a result phone can't be switched on.
Windows in device menager write:
[Qualcomm HS-USB QDLoader 9008] [USB\VID_05C6&PID_9008&REV_0000]
Please, help me
Click to expand...
Click to collapse
Dear, what you did with your phone, only i need to know
Hi Guys,
I have HUAWEI W1-U00. Recently it fails to boot. It is in US not China language. I tried to flash room but it is not working as DOWNLOAD.INF driver of SimpleIO is also unable to be installed. My phone is appeared as Qualcomm HS-USB QDLoader 9008. When I click on Download button of eMMCdownload, my phone doesn't change to HS-USB Diagnostic 9006! And I stuck there.
Please Help as it is now around 3 weeks now, but still it is not working!!! Please help,
bricked HUAWEI W1-U00
rugemma12 said:
Hi Guys,
I have HUAWEI W1-U00. Recently it fails to boot. It is in US not China language. I tried to flash room but it is not working as DOWNLOAD.INF driver of SimpleIO is also unable to be installed. My phone is appeared as Qualcomm HS-USB QDLoader 9008. When I click on Download button of eMMCdownload, my phone doesn't change to HS-USB Diagnostic 9006! And I stuck there.
Please Help as it is now around 3 weeks now, but still it is not working!!! Please help,
Click to expand...
Click to collapse
Hey, am new here.
Also undergoing the same hell... Have tried flashing it on windows 7 32 bit, No success.
Anyone with a Solution?
how unbrick Asus Zenfone Go X104D ?
in pc just Qualcom HS-USB QDLoader 9008 disk drive not detect
help plz?
'X - StREezZ' said:
how unbrick Asus Zenfone Go X104D ?
in pc just Qualcom HS-USB QDLoader 9008 disk drive not detect
help plz?
Click to expand...
Click to collapse
You have MPRG8974.mbn and 8974_msimage.mbn in your stock rom.
Ashwinrg said:
You have MPRG8974.mbn and 8974_msimage.mbn in your stock rom.
Click to expand...
Click to collapse
nope
i have raw image but can't extact with 7zip
hello guys,
Here's my situation - I've got a bricked Motorola e5 play, model: XT1921-6. There is in edl mode or qualcomm hs-usb qdloader 9008.
I need a "loader.img" for my phone...Please Help me
dll_1982 said:
hello guys,
Here's my situation - I've got a bricked Motorola e5 play, model: XT1921-6. There is in edl mode or qualcomm hs-usb qdloader 9008.
I need a "loader.img" for my phone...Please Help me
Click to expand...
Click to collapse
download this and make sure u install all the drivers
https://mirrors.lolinet.com/firmware/moto/james/blankflash/blankflash.zip
Hello, today I tried to install a custom rom on my xiaomi mi5x, after successful installation, my device did not restart. Power on does not turn on , plug in charger does not receive . When I connect to the computer it only receives " qualcomm hs-usb qdloader 900e " . I have tried many ways to unbrick but all are not working, after successful flashing, the device does not boot, has no signal, and connects to the computer only receiving HS-USB qdloader 900e