Hello, today I tried to install a custom rom on my xiaomi mi5x, after successful installation, my device did not restart. Power on does not turn on , plug in charger does not receive . When I connect to the computer it only receives " qualcomm hs-usb qdloader 900e " . I have tried many ways to unbrick but all are not working, after successful flashing, the device does not boot, has no signal, and connects to the computer only receiving HS-USB qdloader 900e
Related
HI guys, i have a problem,I have installed a boot image but it was not correct and my smart phone no longer turns on does nothing and when I connect to the pc I get qualcomm hs-usb 9008 and nose to do, I read that the program qualcomm can be repaired but I do not have much experience, could help me please
I was installing TWRP on my LG L90 D405. Then after reboot it failed to turn on the screen was just black. I thought bout changing the firmware. After formatting I accidentally removed the USB before a flashed any recovery. When I connected again the mass storage file manager didn't show, all I could see was Qualcomm HS-USB QDLoader 9008 on device manager.
Please help :crying::crying::crying:
Hello everyone.
Yesterday while i was trying to install a new rom in my MI5 I bricked my phone.
I wiped the system, data, cache and kernel cache, then, as a mistake I rebooted my phone and all of a sudden it turned black and I couldn't go to the recovery or fastboot.
Now the phone is just black, no response trying to boot or go to recovery\fastboot. When I put to charger theres no LED LIGHT.
So I installed the adb drivers, installed MiFlash, and the computer recognized the phone as QualComm HS-USB QDLoader 9008 COM4.
Then I installed a fastboot rom into the phone using MiFlash, it said flash done and successful.
But, it keeps freezed in a black screen.
Should I just wait for a miracle or theres another option?
My PC still recognizes the phone as QualComm HS USB QDLoader 9008 COM 4.
Thanks in advance.
// EDIT (SOLVED)
Ok so now it booted with the fastboot ROM I flashed.
As I see, after the flash it takes hours to boot. I just went home, dropped the phone in the bed, then I pressed Vol up+Vol down and power button at the same time for two minutes and worked.
I have been using the phone for almost two years, without any problem, with a ROM from xiaomi.eu.
One day the phone suddenly went off, and I couldn't turn it on again. When I plugged it into the PC it recognized it as QLoader HS-USB 9008. I tried to flash another ROM but could not go into fastboot mode.
I decided to open it and unplug the battery, in case it was still on and without a screen, and when I reassembled it, I was able to go into fastboot mode and flash. MiFlash never gave the termination notice, and since then the phone has not responded, the computer does not recognize it, nor does it react to anything (it no longer recognizes it as QLoader HS-USB 9008). I've tried an EDL cable to do deep flash, but it doesn't work either.
I have read that there are some test points to start EDL mode, but I don't know if it will work. Do you know if it would work for this case? I also haven't managed to find a good manual to do this.
Any other idea?
Thank you very in advance.
Last night I turned off the phone and today I want to turn on but nothing only black screen. not able to charge, when I connect to PC I hear sound but only in the device manager can see COM/LTP ports Qualcomm HS-USB QDLoader 9008 (COM4).
I read this is the EDL mode but I don't know how started in this mode.
I installed the ADB, XIAOMI Drivers and MiFlash. After I flashed a chinese stock rom and after flashed the latest global stock rom. The flash was successful but When I disconnect and reconnect again to PC my Redmi 4x is still in EDL mode...
I tried the 2-3 buttons restart and some youtube things but the results is same: Redmi 4x stuck EDL mode.
Plz could anyone help me?