My phone was bought in Australia vodafone。But the system version has been EVA-L09C346B150. It is Emui4.1.1. Why do I see BBS inside a lot of people have b180 updates and I didn't
Because there are carrier / service provider / region variants of the system firmware. The reason why there is no update available through the updater that comes with the phone is because there isn't a update released for Vodafone firmware on EVA-L09C that is newer than what you specified.
I'm going to avoid updating to other region firmware because I don't want to run into cellular signal / network / modem / baseband related issues. So I'll wait for an update that is more suited for my Vodafone Huawei P9 EVA-L09C.
benjamen50 said:
Because there are carrier / service provider / region variants of the system firmware. The reason why there is no update available through the updater that comes with the phone is because there isn't a update released for Vodafone firmware on EVA-L09C that is newer than what you specified.
I'm going to avoid updating to other region firmware because I don't want to run into cellular signal / network / modem / baseband related issues. So I'll wait for an update that is more suited for my Vodafone Huawei P9 EVA-L09C.
Click to expand...
Click to collapse
That excuse me is there any way to brush into the versions of other operators ROM or you can use a third party
benjamen50 said:
Because there are carrier / service provider / region variants of the system firmware. The reason why there is no update available through the updater that comes with the phone is because there isn't a update released for Vodafone firmware on EVA-L09C that is newer than what you specified.
I'm going to avoid updating to other region firmware because I don't want to run into cellular signal / network / modem / baseband related issues. So I'll wait for an update that is more suited for my Vodafone Huawei P9 EVA-L09C.
Click to expand...
Click to collapse
If you are on EMUI 4.1.1 you are on the latest. B150 seems the last one for carrier phone and B180/2 for unlocked phone.
Yep you can flash other region firmware if you want and you can use custom Rom as well which would require a custom recovery + unlocked bootloader at least to do.
benjamen50 said:
Yep you can flash other region firmware if you want and you can use custom Rom as well which would require a custom recovery + unlocked bootloader at least to do.
Click to expand...
Click to collapse
Do you have a specific tutorial
Marsou77 said:
If you are on EMUI 4.1.1 you are on the latest. B150 seems the last one for carrier phone and B180/2 for unlocked phone.
Click to expand...
Click to collapse
Do you have a specific tutorial
Related
There is a new Australian voda firmware in sammobile. It seems like there are a lot update in the changelist. I have flashed the firmware but is yet to find any difference. Would really be glad if someone can help to point what's the difference other than the baseband and modem version.
In settings > about device, what is your Android Secuirty Patch date, if its December it will carry the 24 Security fixes as outlined on the Samsung Secuirty Blog.
SM-N920C (Note 5) - Dr Ketan Rom - Arter Kernel - CWM Recovery
Ryya said:
In settings > about device, what is your Android Secuirty Patch date, if its December it will carry the 24 Security fixes as outlined on the Samsung Secuirty Blog.
SM-N920C (Note 5) - Dr Ketan Rom - Arter Kernel - CWM Recovery
Click to expand...
Click to collapse
Yes it is December. ..
Just to share another finding...I found an extra option which is not available in the previous xsa Australia version for VoLTE call. You can find this under setting and mobile networks.
Kuailan, which model do you have? I have SM N920I & no updates?
Sheikha said:
Kuailan, which model do you have? I have SM N920I & no updates?
Click to expand...
Click to collapse
As I have mentioned in my first post, you will need to go to sammobile web site (you cant just check update for your phone manually). The firmware is for 920I model but it is a Vodafone released. My phone is 920I but it was Australian XSA flashed firmware initially but I have updated to this firmware now.
Australia models have VOLTE? Can you screen shot this for me please?
LiL_Assassin said:
Australia models have VOLTE? Can you screen shot this for me please?
Click to expand...
Click to collapse
As I have said in my previous xsa Australia firmware I don't have this option. However once I flashed the updated voda firmware I have this option.
One important thing about this new firmware and funny at the same time:
All European languages enabled by default and somewhere deeper in CSC it says for Italy
EDIT: It seems to break TWRP recovery atm - Philz works.
Yes, all European languages enabled but i don't have VOLTE.
I have an international version of n920i (so no carrier firmware), can I apply the update and still be carrier free?
dark_fighter said:
I have an international version of n920i (so no carrier firmware), can I apply the update and still be carrier free?
Click to expand...
Click to collapse
You can still apply the update. I don't think applying Voda firmware will mean it will lock your phone down to voda.
kuailan said:
You can still apply the update. I don't think applying Voda firmware will mean it will lock your phone down to voda.
Click to expand...
Click to collapse
I don't think it will be locked to Voda but that it wipe everything or that it will load my note with Voda bloatware
dark_fighter said:
I don't think it will be locked to Voda but that it wipe everything or that it will load my note with Voda bloatware
Click to expand...
Click to collapse
Flashing firmware will not erase any data..all your stuff will be in tact. The only bloatware you probably get is only the voda app. But you can disable it...I have checked there is nothing else.
kuailan said:
Flashing firmware will not erase any data..all your stuff will be in tact. The only bloatware you probably get is only the voda app. But you can disable it...I have checked there is nothing else.
Click to expand...
Click to collapse
Even if applied through kies? (As in me downloading it manually and applying through emergency recovery and initialization)
dark_fighter said:
Even if applied through kies? (As in me downloading it manually and applying through emergency recovery and initialization)
Click to expand...
Click to collapse
Bro...why don't do the simple one...just use Odin and flash. It won't trip the knox anyway. Just make sure it's latest version of Odin ...otherwise won't work.
I have never flash through kies...but I'm pretty sure it won't affect your data. Just when you receive Ota update on the phone. Installing them won't erase your data.
many thanks!:good:
Been working towards debranding my P9 from L09C34 (optus/au) to L09C636 (hw/asia).
Tried following all the guides and consistently ending up with C900 firmware, but managed to successfully roll back to the original C34, with version number displayed correctly on the phone.
My question is this:
In the C34 firmware that came with the phone (and that i've been using to roll back) AND the C636 firmware, BOTH firmwares have only two lines in VERLIST.IMG:
EVA_C900B000
EVA_Global
How then, does this part of the debrand process affect the version number displaying correctly, if both the successful original firmware and the unsuccessful C636 firmware have the same entries?
I had the same issue with wife's P9 Optus rom is based on the Global Version. EVA_C900 you need to flash both rom and data partition
Sent from my iPad using Tapatalk
DanXbix said:
I had the same issue with wife's P9 Optus rom is based on the Global Version. EVA_C900 you need to flash both rom and data partition
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thanks. I managed to successfully get back to the Optus firmware with the correct version displaying - but I still haven't cracked the de-brand without it showing C900 firmware - from what I read, C900 is a cross-flash firmware and will not get OTA updates. My main concern was getting the Nougat update, which has apparently started appearing on the unbranded devices.
Did you manage to de-brand your wife's phone to C636? Does it show the correct firmware version in 'about phone'?
I tried to debrand my C34 to C636 as well but ultimately, I gave up on it and went to the debranded C432 UK version. There are plenty of info on this forum on how to do it and there is no lose in functionality and it works perfectly fine with the AU carriers. Realistically, apart from the build having C432 instead of C636, you wouldnt see or feel a difference between the 2 models. If anything, C432 will get updates sooner than C636 (as proven with Nougat).
I bought a Factory Unlocked Note 8 from Amazon model name is SM-N950U . I use Phone Info it told me my model is SM-N950UZKAXAA and working on XAA csc. It's running on Verzion Firmware but has no bloatware and carrier provide info is XAA/XAA/VZW . But i haven't receive any OTA update until now. I used smart switch it told me "Your current version is lastest", and verizon software update told me "The current firmware is not supported !". But i try many times to flash verizon firmware version but my phone still not have any carrier bloatware and still have no OTA update !
Anyone told me how to receive OTA update with my phone ! Although i flash many carrier firmware but it still XAA/XAA/VZW !
I used to flash N950U1 firmware but it make my wifi connection on my phone not perfect, it's slow down to much !
Hi can someone please help
I have unlocked Note 9 in the United Kingdom on three network ( purchased the handset and have a SIM only network deal ).. When will I get an OTA software update ? ... On SAMMOBILE I keep seeing new firmware builds for Note 9 and then the network name including ones for three... Is it Samsung or three that push the OTA software builds to my device ?
What CSC and what build do you have?
You can always grab latest available firmware ( OXM multi CSC ) and flash it manually through Odin. This won't trigger Knox or avoid warranty. Do make sure you know what you're doing and that you download the right firmware.
I have Note 9 with Indonesian Firmware and im thinking to flash Australian firmware. I checked the phone model number and its exactly same (N960F/DS). what im worried about is
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
Any help would greatly appreciated
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
if you flash the firmware with the Austrailian CSC, you will only get updates from carriers within that CSC in accordance with what network your SIM is connecting to. Only time you flash them manually is if you have an aftermarket recovery such as TWRP
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
see above
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
samsung pay doesnt work in certain countries period. that might be what youve been seeing
Youdoofus said:
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
if you flash the firmware with the Austrailian CSC, you will only get updates from carriers within that CSC in accordance with what network your SIM is connecting to. Only time you flash them manually is if you have an aftermarket recovery such as TWRP
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
see above
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
samsung pay doesnt work in certain countries period. that might be what youve been seeing
Click to expand...
Click to collapse
I tried to flash with Global Australian CSC (not for any specific carrier) and I was be able to get update OTA. Now, the problem is after I flashed Au firmware (incl, BL, AP, CP, CSC) with Odin3B, somehow the service provider software has changed to AUT/AUT/XID while previously XID/XID/XID which is weird. I tried flash using HOME CSC file and couple times I re-download the firmware and flashed other unlocked au firmwares (with android 10 version) it still gave me AUT (Switzerland) instead of XSA (Australia).
Any idea why?