I bought a Factory Unlocked Note 8 from Amazon model name is SM-N950U . I use Phone Info it told me my model is SM-N950UZKAXAA and working on XAA csc. It's running on Verzion Firmware but has no bloatware and carrier provide info is XAA/XAA/VZW . But i haven't receive any OTA update until now. I used smart switch it told me "Your current version is lastest", and verizon software update told me "The current firmware is not supported !". But i try many times to flash verizon firmware version but my phone still not have any carrier bloatware and still have no OTA update !
Anyone told me how to receive OTA update with my phone ! Although i flash many carrier firmware but it still XAA/XAA/VZW !
I used to flash N950U1 firmware but it make my wifi connection on my phone not perfect, it's slow down to much !
Related
Hey guys...
Just got a used note 8 and I flashed it to Android pie with one ui (N950USQU5DSD3). Now the problem is that I can't update the phone via OTA. When I click software update its sticks at "registering device" with a spinning circle. Now I suspect that it's a U950W (my friend said it was locked with Bell and unlocked after the the plan ends). Now on sammobile.com the lastest firmware for note 8 (N950U) is N950USQS5DSF5. And I don't want to flash back to the Canadian version (n950w) because it doesn't get update as often as the n950u or n950u1 and it comes with a lot of Bell bloatware.
So for me to get a OTA without any bloatware, which version should I flashed?
Many many thanks.
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
to your last point, at&t phones are notoriously bad at updating
factory unlocked phones will remain forever unlocked and phones unlocked that are bespoke to a specific carrier will also remain unlocked even with Odin flashes providing that the method employed to unlock it was legitimate. Some unlock methods employ root and only trick the phone into thinking its unlocked. Well, once you remove root, and thusly the trick, the unlock is gone. I have ran across rare examples where the person swore up and down that they unlocked their phone with a legit unlock code and that it relocked to a carrier once the sim was inserted and initial programming completed, but i dunno. Sounds weird to me, but every person who said this also said that the phone locked to a carrier other than the one it came from originally. Take that for what its worth, but i still mostly stand by the first couple lines of this section of my diatribe
If you want the at&t crap gone, get the N960U1 firmware and flash it in Odin. You will need the modified version of Odin to flash it so it can ignore the 255 errors the phone throws up from flashing firmware for a carrier (or, in this case, no carrier) on to a phone that it wasnt originally designated (not designed) for
go to sammobile.com/firmwares, get the info for the firmware you want to d/l, get the Frija tool or Samfirm and download the firmware thru one of those as theyre literally 5x faster and flash it
mtrackerbeyond said:
Hi i am new here and need help with updating my Samsung note 9 i still have a baseband N960USQS1ARI5 but will like to update to the latest firmware. i'm using an unlocked AT&T phone. can anyone guide me? I'm not sure if updating the firmware will lock the phone and the process to update, do I just update the firmware in stages as the updates were released till i get to the latest update or can i update straight up to the latest? I am thinking of using Odin, is that a safe way to do this? any help will be appreciated. Lastly, can I change from the AT&T firmware to lets say a none carrier based firmware so as to stop seeing the AT&T logo on boot up? Maybe switch to a firmware that supports global or international? Does anyone have links to an unlocked firmware update i can use, as well? Please help!
I must state that the phone never updates automatically as it always says the software is up to date.
Click to expand...
Click to collapse
Hi, my phone is a Note 9 ATT factory unlocked.
Below is the link for my post
I've updated my phone using the link , and still unlocked and working Ok.
I hope it can help you .
https://www.google.com/amp/s/forum....note-9-att-rom-update-sept-2019-t3979303/amp/
It's an unlocked Galaxy S10 AT&T G973U..
I am using it internationally and not with an AT&T sim, so I don't try to upgrade it OTA anymore..
I tried Smart Switch, it says it's up to date. But last security patch was April 2019 and it's running Android 9.
Build and Baseband: G973USQU1ASD7 (According to SamMobile) there's no Android 10 for this baseband.
But my question is, can I flash let's say USA (Android 10) G973USQU3CTB1 or would I need to wait for the baseband for my model?
If I missed something, feel free to correct me.
Thanks!
Having a "U" model means Universal. You can flash any U.S. carrier stock firmware to it. If you have AT&T firmware and want to use T-mobile firmware instead, you can do it by flashing it with Odin.
You can get most firmwares off Sam mobile (Verizon, Sprint, T-mobile). AT&T firmware is hard to come by and you will usually have to pay to get it from a pay site like www.gsm2file.com
Just download an Android 10 firmware and flash it. No matter what it is as long as it's for the U model line.
StoneyJSG said:
Having a "U" model means Universal. You can flash any U.S. carrier stock firmware to it. If you have AT&T firmware and want to use T-mobile firmware instead, you can do it by flashing it with Odin.
You can get most firmwares off Sam mobile (Verizon, Sprint, T-mobile). AT&T firmware is hard to come by and you will usually have to pay to get it from a pay site
Just download an Android 10 firmware and flash it. No matter what it is as long as it's for the U model line.
Click to expand...
Click to collapse
Ok, thank you very much.
And is "USA" only unbranded? I don't want any bloatware since I am international and I don't benefit from anything they offer.
The G973U phone will only accept U.S. firmware (Verizon, Sprint, At&t, T-mobile, Spectrum, Xfinity, and unlocked U1 Samsung firmware). So if you flash the U1 unbranded firmware you will get rid of carrier bloatware.
StoneyJSG said:
The G973U phone will only accept U.S. firmware (Verizon, Sprint, At&t, T-mobile, Spectrum, Xfinity, and unlocked U1 Samsung firmware). So if you flash the U1 unbranded firmware you will get rid of carrier bloatware.
Click to expand...
Click to collapse
Say I wanna get rid of the bloatware, what firmware do I select from the U1 variants? Because I see all of them have carrier names.
If you get it from sam mobile it's XAA from Unknown. The latest is the CTB5 bootloader. I think there's also a thread in the forums here that contains Odin firmware.
jannamain1 said:
It's an unlocked Galaxy S10 AT&T G973U..
I am using it internationally and not with an AT&T sim, so I don't try to upgrade it OTA anymore..
I tried Smart Switch, it says it's up to date. But last security patch was April 2019 and it's running Android 9.
Build and Baseband: G973USQU1ASD7 (According to SamMobile) there's no Android 10 for this baseband.
But my question is, can I flash let's say USA (Android 10) G973USQU3CTB1 or would I need to wait for the baseband for my model?
If I missed something, feel free to correct me.
Thanks!
Click to expand...
Click to collapse
Here is the latest SM-G973U Android 10 firmware. It was just released yesterday morning. https://samfrew.com/download/Galaxy__S10__/f6o3/VZW/G973USQS3CTB5/G973UOYN3CTB5/
I purchased an unlocked S10 from Best Buy in Canada and it ended up being a US version of the phone (Samsung support says it's originally from AT&T). It currently has One UI 3.1, Android 11, and the December 1, 2021 patch - all of which appear to be outdated - but attempting a software update on the phone says the software is up to date and Smart Switch also says there's no update.
I've spoken to 8 or 9 Samsung agents but, to put it politely, they've been completely useless and my local Samsung store said they "won't even touch" my phone because it's from the US. I know people will say to flash the new firmware with Odin, but I'm using a mac and Odin seems to be Windows-only. Is there any way for me to get updates on my phone?
Hello riffamortis, look on samfrw you type on search device Sm-G973U the firmware must be present download and flash with odin
https://samfw.com/firmware/SM-G973U
look with phone info application for your precise model it can be U see U1 the 2 firmware its android 12
https://samfw.com/firmware/SM-G973U1
Hi Folks,
I have bought a G973U samsung S10 but it is not receiving any updates and I am obliged to flash it with ODIN, I heard that I can technically flash G973U1 XAA firmware on it and it will update via OTA, is this true please ? I have the SPR firmware on it. Thanks for your help.
Depends on the carrier. ATT (I assume you're in the USA?), for example, won't do OTA updates unless the IMEI also matches (and maybe some other switches at ATT that we can't change).
XAA should update on some carriers, at least. My XAA updates on TotalWireless (VZ MVNO)... I've actually blocked them because I want to stay on A11 for now.
I believe you can upgrade via ODIN yourself without using an OTA - just be sure to use the HOME_CSC file because the non-home CSC will wipe your data. Any reason you're not doing that? This way, you can control your own updates and timing.
Hello Sofiene.Saidi, look at the official US firmware here for your model, the best thing for you is to take a model for your European region.
us firmware link
Download Samsung Galaxy S10 SM-G973U USC USA (US Cellular) G973USQU6IVE7 firmware
Fast download latest Samsung Galaxy S10 firmware SM-G973U from USA (US Cellular) with G973USQU6IVE7 and Android version 12
www.sammobile.com
I bought a G973U in Switzerland and it has XAA firmware on it. I think it is an ATT unlocked device but I have never had a single Software Update.
meric57 said:
Hello Sofiene.Saidi, look at the official US firmware here for your model, the best thing for you is to take a model for your European region.
us firmware link
Download Samsung Galaxy S10 SM-G973U USC USA (US Cellular) G973USQU6IVE7 firmware
Fast download latest Samsung Galaxy S10 firmware SM-G973U from USA (US Cellular) with G973USQU6IVE7 and Android version 12
www.sammobile.com
Click to expand...
Click to collapse
Thanks Meric ! But how can I know which is the best for my region ? I am in France actually ! Many thanks
Fast_Lessy said:
I bought a G973U in Switzerland and it has XAA firmware on it. I think it is an ATT unlocked device but I have never had a single Software Update.
Click to expand...
Click to collapse
Hi Fast, same for me XAA ATT but SPR (SPRINT firmware), everything is working fine except Sapm protection which is greyed
schwinn8 said:
Depends on the carrier. ATT (I assume you're in the USA?), for example, won't do OTA updates unless the IMEI also matches (and maybe some other switches at ATT that we can't change).
XAA should update on some carriers, at least. My XAA updates on TotalWireless (VZ MVNO)... I've actually blocked them because I want to stay on A11 for now.
I believe you can upgrade via ODIN yourself without using an OTA - just be sure to use the HOME_CSC file because the non-home CSC will wipe your data. Any reason you're not doing that? This way, you can control your own updates and timing.
Click to expand...
Click to collapse
Thanks for your anwser Schwinn, actually it is fine with ODIN but each time I need to flask aprroximately 6Gb of firmware, it is somehow risky isn't it ? Can I flash USC firmware and get OTA updates please ?
If you're in France, I don't think you'll ever get OTA updates.
No, flashing the ROM a few times over the phone's life isn't going to affect the device that much. If you did it every day, then sure... but a few flashes over the life of the phone won't make much difference. I recommend you just do the updates yourself with these files and don't worry about the OTAs, because you are unlikely to get them.
schwinn8 said:
If you're in France, I don't think you'll ever get OTA updates.
No, flashing the ROM a few times over the phone's life isn't going to affect the device that much. If you did it every day, then sure... but a few flashes over the life of the phone won't make much difference. I recommend you just do the updates yourself with these files and don't worry about the OTAs, because you are unlikely to get them.
Click to expand...
Click to collapse
Great, thanks a lot and anyways one day the OTA updates will stop Have a great day.
Sofiene.Saidi said:
Hi Fast, same for me XAA ATT but SPR (SPRINT firmware), everything is working fine except Sapm protection which is greyed
Click to expand...
Click to collapse
I installed google phone and messages apps and I have the spam protection too !!!!