Hi,
I am on rooted P7-L10 C900 B852, for a long time, but recently my phone suddenly resets itself.
When it happens, I have a hard time to turn it on. I have to do it several times, and sometimes I end up with "Optimizing app x of y" message (that is message that is shown after upgrading rom).
After optimizing is completed, my all wireless passwords are cleared so I have to rejoin again.
I tried to do the factory reset from twrp, but with no success – everything is the same as before.
What are my options now?
Can I somehow check hardware (I believe that there are some codes that I can type in for that)?
Could I reinstall B852 again?
How to clear everything and start from very beginning?
Regards.
So now you are at B852 after a automatic reset?
What about restore a backup with twrp?
And what do you mean with twrp factory reset is not working? Is twrp not able to mount the data partition?
If you want to reinstall B852 you have 2 options:
Flash the stock recovery then update using the UPDATE.APP
Get the Huawei Update Extractor tool, extract the UPDATE.APP package and then using fastboot flash the system, boot, cust and cache partitions
I had a really hard time with the phone. Looks like my sd card has gone, so I ordered the new one.
I have downloaded update.app and I have flashed B830 recovery.
Is this anything I need in order to flash stock rom again?
I will use three button restart in order to activate flashing process.
Whatever I do, I want to put phone in factory state.
What is current twrp version that I have to flash in order to root the phone (supersu)?
Regards.
http://forum.xda-developers.com/showthread.php?t=3314665
After flashing stock recovery, I used recovery to do factory reset. Than I have put update.app on sd card, and installed B852.
After installation has completed, I have installed twrp from the link above and flashed supersu.
By now, I am using the phone for few days with no problems at all. Even battery has more stamina.
Thanks guys. ðŸ‘
Sent from my HUAWEI P7-L10 using Tapatalk
Related
I rooted the device. And decided again to unroot it so i flash recovery.img and lock bootloader. But when i open it again it wipe my system apps. No camera no keyboard etc. i downloaded the stock c636b361 firmware. But using DLOAD wont flash it. Even on twrp. On dload i use stock recovery but still it always says software failed. Any suggestions? I already wipe cache partition and factory reset it. But still the same.
Hi, i managed to brick my p9 eva-l19, i was having the stock rom with the latest update, bootloader unlocked, twrp, rooted and i managed to brick him by wiping all. Now all it does is entering in bootloader mode, recovery (twrp) and that's it. I downloaded the stock rom with the latest update, put the update.app on an sdcard but it doesn't work in download mode, the update is not made, error.
What i have to do to unbrick my phone? i'm sure this question has been asked a lot of times but i didn't find a good answer.
When you downloaded the stock rom you got a update.zip and a full_data.zip (or something along these lines). Just Install them via TWRP ( VERY IMPORTANT: first update.zip and then full_data.zip). after that go back and wipe chache and dalvik, then go in the main menu of twrp and klick on reboot and then on recovery. You should boot into stock recovery where you need to wipe cache and do a factory reset. You should boot into stock firmware
Hello Everyone,
I tried to revive my P8 Lite 2017 and it's impossible. I followed every guide I found but anything work for me.
I have access to bootloader also recovery.
erecovery not working, fail when try to download.
recovery not working factory reset stock at 99%
bootloader I can flash but maybe i didn't find the right firmware.
The version I had was PRA-LX140B105.
More information.
I deleted some picture so I tried to recover this photo so I used undeleter, diskdigger and these app said if you're rooted you have more change to find things.
I rooted the phone and when I used this apps, wanted to come back to factory so I flashed supposedly a stock rom from firmware finder huawei. I flashed boot, recovery and system. The first time I boot stuck on your device is booting now, after that i swith off my phone and tried recovery I do wipe cache also wipe data and factory reset then again 99%. I swith off again my phone start again the factory reset by itselft and then say completed, phone reboot and then i see the animation and stuck on huawei logo after that reboot by itselft and then open erecovery. Again I Turn off phone try to swith on and stuck on your device is booting now..
I don't know what more I can do.
I tried to put update.app inside dload folder in sd card but it fails
flash TWRP, restore this https://mega.nz/#!vspAXIZI!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo in TWRP, flash stock recovery, update to the newest firmware, do a factory reset and flash a recovery of your choice.
to get the backup to work, first create a random backup in TWRP then go to TWRP/BACKUPS/*random numbers* and put the downloaded backup there
How to root this big brick?! Damn huawei site not allows me to login! Need root bcs of few apps dmn **** nobody dont know and dont want to help me here???
thebdl said:
Hello Everyone,
I tried to revive my P8 Lite 2017 and it's impossible. I followed every guide I found but anything work for me.
I have access to bootloader also recovery.
erecovery not working, fail when try to download.
recovery not working factory reset stock at 99%
bootloader I can flash but maybe i didn't find the right firmware.
The version I had was PRA-LX140B105.
More information.
I deleted some picture so I tried to recover this photo so I used undeleter, diskdigger and these app said if you're rooted you have more change to find things.
I rooted the phone and when I used this apps, wanted to come back to factory so I flashed supposedly a stock rom from firmware finder huawei. I flashed boot, recovery and system. The first time I boot stuck on your device is booting now, after that i swith off my phone and tried recovery I do wipe cache also wipe data and factory reset then again 99%. I swith off again my phone start again the factory reset by itselft and then say completed, phone reboot and then i see the animation and stuck on huawei logo after that reboot by itselft and then open erecovery. Again I Turn off phone try to swith on and stuck on your device is booting now..
I don't know what more I can do.
I tried to put update.app inside dload folder in sd card but it fails
Click to expand...
Click to collapse
You can use DC-Phoenix to restore your device.
Hey... how can I help you man?
Hi there!
I have a P9 (EVA-L09) on my desk, which is in an inconsistent state. Meaning, that it in original condition it was a C02 with German Vodafone branding. Then the owner flashed some Nougat beta (can't remember which one), wasn't happy with Nougat and wanted to go back to MM by using the official rollback package provided by Huawei. The dload update failed and then he tried to flash different versions stock roms (can't remember either), leaving it in a constant bootloop. So first thing i tried was flashing TWRP. It boots up, but the touchscreen is not working. I think this is because some of the partitions where destroyed (firmware e.g.). So I flashed the C432B182 recovery and tried to dload the C432B182 firmware. The update process stops at 5%, maybe because in the meantime the device was converted to a C900? So I tried to get some C02 firmwares. The oldest I could get was C02B339. dload started the update process and failed at nearly 100% with the "Software install failed" message - no additional information. Because I have only fastboot and no adb connection, I can't rebrand to C432 (only adb shell in twrp is running, but I can't access the internal memory from there - or can I?). So these are the hard facts and I don't see any way to get a working rom on the P9. So, is there anyone with another idea? Would be great. Thanks!
Ok, I got it working again. Here are my steps, just in case anyone gets in the same situation:
1. Flash Stock recovery through fastboot, extracted from C432B182
2. Boot to Stock recovery with Vol Up + Power, it should start
3. Wipe cache and try to factory reset - won't work
4. Put C432B182 UPDATE.APP in dload folder on SD card
5. Tried Vol Up + Down force flash, but it did'nt work, so I wanted to get back into recovery by starting with VOL Up, and voila - it started flashing the B182 from SD card, BUT says failed at 99%
6. After that, boot into recovery again and see that factory reset now works
7. After factory reset restart phone and enjoy your unbricked P9 on C900B182. From here you can change to C432 with the known manuals to get the latest updates
Got official notification and have installed Pie (9.0.1.163) on my VTR-L09C432 P10.
Downloaded the Full OTA (9.0.1.163), extracted the RECOVERY_RAMDIS.img, patched with Magisk 7.1.1 and flashed using fastboot to the recovery_ramdisk partition. When rebooted with Vol+ have root. Played around with Pie and have decided to revert back to Oreo.
HiSuite (v9.0.3.300_OVE) did offer me rollback to 8.0.0.365. So I have decided to pursue this option. The firmware download went OK (100%), the programing went OK (100%) and the phone rebooted, as said the popup, but ... it was still on Pie as before.
Decided to try to "upgrade" via eRecovery. It wasn't able to determine and download any package. So I tried factory reset. No error, but it seems to do nothing. The phone rebooted and the situation is: Pie works, Magisk reports root 18.1 and root apps work.
From this moment I am unable to enter fastboot. The phone just boots normally with Magisk root. As I have just written eRecovery is present but is useless (can't download an upgrade package and can'r factory reset).
Advice?
Should I try writing from a term using dd the extracted RECOVERY_RANDISK.img and ERECOVERY_RAMDISK.img ? This way will loose root (Magisk) but don't know if it "resolve" access to fastboot and "fix" eRecovery.
EDIT:
No reply so decided to go ahead with what I thought was happening. I didn't know that a firmware upgrade (or downgrade) needs recovery to complete. I thought erecovery was the key.
So when I used HiSuite to rollback to Oreo what happened was it downloaded the Oreo firmware, uploaded it to the phone, prepared for a firmware flash and did a reboot. The firmware downgrade was supposed to happen in recovery but since the recovery code was changed by Magisk the flashing was never happening.
The same when from erecovery I tried to do a factory reset. Seems that erecovery just prepares things but recovery code does the actual reset. And once again I was observing that nothing was happening. The phone was simply root booting exactly as the Magisk code is supposed to do.
So I just flashed (from a term) the original recovery_ramdisk.img. After reboot got the factory reset welcome screen.
Of course got back fastboot.
Hope this can be of of help someone is a similar situation
Dude can you please guide us how to actually use DD command.
edit: I did this a different way. much easier & safer for less experienced users.
1. Open magisk manager. At the bottom of the first screen there is a button "UNINSTALL". Press uninstall & click "restore images".
2. Magisk will remove itself and restore your original boot image. Worked for me