Hey guys,
I have a Samsung galaxy s6 SM-G920F and my screen is stuck at "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" screen.
I wanted to root my phone and it went without a problem then I wanted to install Xposed and I got stuck at the samsung logo when starting up. After that I researched a bit and it said I had to install a custom rom so I tried a few but none of them worked. after a while of trying a few different firmwares one of the firmwares I tried flashing on to my device gave a different error. I wanted to try it again and use a different USB port but my screen hopped to this saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I tried using the Smart Switch but it keeps saying. The S/N you have enterd is incorrect. Please check and re-enter. I tried every single code that was on my box but none of them are working.
I just tried if I can still use odin and I can still use that but keeps giving an error. But now my question is: does any one knows how to fix it?
Kind regards.
SlipperOpKop said:
Hey guys,
I have a Samsung galaxy s6 SM-G920F and my screen is stuck at "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" screen.
I wanted to root my phone and it went without a problem then I wanted to install Xposed and I got stuck at the samsung logo when starting up. After that I researched a bit and it said I had to install a custom rom so I tried a few but none of them worked. after a while of trying a few different firmwares one of the firmwares I tried flashing on to my device gave a different error. I wanted to try it again and use a different USB port but my screen hopped to this saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I tried using the Smart Switch but it keeps saying. The S/N you have enterd is incorrect. Please check and re-enter. I tried every single code that was on my box but none of them are working.
I just tried if I can still use odin and I can still use that but keeps giving an error. But now my question is: does any one knows how to fix it?
Kind regards.
Click to expand...
Click to collapse
Go to Settings> About Device> Status
You can get your S/N there.
You can also dial *#06#
cwhiatt said:
Go to Settings> About Device> Status
You can get your S/N there.
You can also dial *#06#
Click to expand...
Click to collapse
I don't think he can access to his device...
---------- Post added at 09:24 PM ---------- Previous post was at 09:23 PM ----------
SlipperOpKop said:
Hey guys,
I have a Samsung galaxy s6 SM-G920F and my screen is stuck at "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" screen.
I wanted to root my phone and it went without a problem then I wanted to install Xposed and I got stuck at the samsung logo when starting up. After that I researched a bit and it said I had to install a custom rom so I tried a few but none of them worked. after a while of trying a few different firmwares one of the firmwares I tried flashing on to my device gave a different error. I wanted to try it again and use a different USB port but my screen hopped to this saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I tried using the Smart Switch but it keeps saying. The S/N you have enterd is incorrect. Please check and re-enter. I tried every single code that was on my box but none of them are working.
I just tried if I can still use odin and I can still use that but keeps giving an error. But now my question is: does any one knows how to fix it?
Kind regards.
Click to expand...
Click to collapse
Did you entered them the way it is? i think they are capital letters
Related
Hello folks.
Had a go at rooting Samsung i9000. It's quite old, and clearly clogged up to the hilt with the apps very laggy and frequently crashing. I quite fancied getting rid of the bloatwear too and the bloody annoying splash screen at start up!
Needless to say, it's all gone belly up. I've tried a couple of things using the guides here, but I don't want to keep pushing my luck in case I completely brick the device.
I'm running an i9000 in the UK on the o2 (Well, giffgaff) network. It was running Gingerbread, 2.3.5 I think. As it stands, I can get into the download option, but nothing else. I had used Odin 3, but have since read that the highest level is 1.83, which I now have. This might have caused the initial problem, but it's "soft" bricked. I've tried to flash over a stock rom again, but I keep getting failure notices. I can't get past the "Can't open the serial (COM) port" error message on Odin. I've downloaded the drivers and they have successfully installed.
One thing I don't think I did beforehand was to enable USB debugging.
I also tried the guide on here which uses the pit method, and curiously enough, it went through without the COM port error. The only thing that did, however, was to remove the "Phone + PC" logo. I am still able to get into download though.
Help! I am due to get a new phone very shortly, but it would be very useful to get the phone working again in the meantime! Any help very much appreciated.
If Kies is running in background it will fail, Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN. Try flashing now.
Try uninstalling Kies and then reboot and install the Samsung Drivers. Try then.
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
Hello Guys,
I really hope there is someone who can help me out, because I think i've screwed up.
So, I tried my hand at rooting and flashing my old phone (the samsung galaxy s plus), but turns out, I'm more of a noob than I originally thought.
Okay, so here the problem: I tried installing Cyanogenmod 12.0 on my phone using TWRP. Eventually I thought I got it right when my phone finally started installing Cyanogenmod, but then after a while the installing broke of and there came a message saying: Encryption Unsuccessfull. Before I went ahead en pressed the reset phone button I researched what it meant, and there were threads saying, don't push that button and that I should try and re-install the original firmware using Odin. But when I tried to re-install the firmware Odin couldn't find my phone. And everytime I connect my phone to my pc it says that it can't connect because the thing is damaged. I also tried to connect with my phone using Kies, which also didn't work. I tried researching what to do, but nothing works.
So please someone help me!! I can't, for the life of me figure out what to do. And like I said I'm a complete and utter noob concerning this type of thing.
I attempted going to my recovery mode and found a message saying "System software not authorized by AT&T has been detected on your phone." When you pay attention to the top left of Odin mode when you attempt to install, two red text lines appear. The first being "START [224, 1440]" and the next being "SECURE CHECK FAIL : recovery" I assume this is because AT&T detected something that was not supposed to be there.
The reason I believe AT&T detected something was because I attempted to flash a rom for Android 4.4.2 (Lollipop) using Droidviews tutorial (sorry, new user so I can't post the link :/) among others. This was with root access, which may have tripped the bootloader as well. I believe I was supposed to install a custom bootloader like TWRP or CWM beforehand (and I tried getting TWRP but it did not seem possible with AT&T's bootloader so I figured I may as well try it without and afterwards it would be easier); however, I never read any instructions in any of the websites I have used to root/update my phone that say I must have it so I am skeptical. Any guesses on how to fix it?
I also tried to flash the stock rom via Odin. Maybe it didn't have the "official" AT&T signature on it because I got the same error, but I looked anywhere I thought there may be a stock rom that would work. Any suggestions would be appreciated
Raeffion said:
I also tried to flash the stock rom via Odin. Maybe it didn't have the "official" AT&T signature on it because I got the same error, but I looked anywhere I thought there may be a stock rom that would work. Any suggestions would be appreciated
Click to expand...
Click to collapse
Take a look at the stickies.
http://forum.xda-developers.com/galaxy-s4-active/general/galaxy-s4-active-firmware-guide-t2892445
Devo7v said:
Take a look at the stickies.
http://forum.xda-developers.com/galaxy-s4-active/general/galaxy-s4-active-firmware-guide-t2892445
Click to expand...
Click to collapse
Well that certainly helped, I never knew someone created an Odin exe for the stock rom. It seemed to be working up until the end but for some reason it stopped (I forgot to log why as I am still a newb at this; I think it tripped my recovery mode again). I rebooted it and an error appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." This seemed simple enough until Kies just would not connect to my phone. I left it for about 10 minutes until an error appeared saying that my device is not responding. It told me to reboot it and try again, so that's what I did. It seems to be doing the same thing regardless. I tried troubleshooting a connection error and it reinstalled the Kies drivers (I did this countless times), but the same thing kept happening.
Raeffion said:
Well that certainly helped, I never knew someone created an Odin exe for the stock rom. It seemed to be working up until the end but for some reason it stopped (I forgot to log why as I am still a newb at this; I think it tripped my recovery mode again). I rebooted it and an error appeared saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." This seemed simple enough until Kies just would not connect to my phone. I left it for about 10 minutes until an error appeared saying that my device is not responding. It told me to reboot it and try again, so that's what I did. It seems to be doing the same thing regardless. I tried troubleshooting a connection error and it reinstalled the Kies drivers (I did this countless times), but the same thing kept happening.
Click to expand...
Click to collapse
The one click seems to work well, but it never finishes completely. I cannot flash an OTA file as my bootloader is inaccessible. I may be able to do so from my computer but I have found no programs or guides to. Also, almost all of the downloads are down or outdated on the sticky with the exception of the ones I can't use.
Found the proper files to flash my phone successfully, the stickies were all outdated.
Hello,
I am a noob... My note 5 went into boot loop several days after installing Avira (after the last update my phone said I had a virus... I should have known better)... I have spent many days researching and trying different things... most advice came from XDA so I joined. I have learned a lot but still have no success.
Samsung says I need a new phone... the local store took out the battery with no luck... They said its a gonner. Really??
I can get the phone into download and have it talk to my PC, but that is it... I cannot get into recovery or reset the phone
I was able to downgrade to OK3 using odin and passed, but still boot loop
I have purchased software to recover data, but FRP has blocked it
I have tried many different ways to remove FRP, but all have failed... I don't think I ever put this phone in debugging mode so I think that is why the other things have failed.
Is there anything I can do? Can you point me in the right direction (as long as it is not the trash can)
Please help.
Since you can get into download mode , have you tried to flash a full firmware package (make sure of model number first) via Odin ? sammobile has most firmwares. I would start with that. Good luck
Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one
danarmor said:
Thank you so much for responding... I flashed ok3 from one of the links posted on this site using Odin and it passed successfully, but did not fix the problem. What would be the full firmware pack and were could I find so I know I have the right one
Click to expand...
Click to collapse
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F
Rosli59564 said:
Just use smart switch. You don't have to worry about which firmware to be flashed. It will decide for you.
Sent from my SM-G925F
Click to expand...
Click to collapse
I tried that before with no success, but since Smart Switch had an update I tried it again... It says it does not support my SM-N920P.
I tried emergency rescue and it recognized my model number, but says I entered the wrong SN... I pretty sure I am entering the right SN
Hello! I am currently new here and a newbie when comes to this stuff. Anyway, to get to my point, my cousin gave me an SM-N9208 Duos but it was a China phone and he said that it was a cloned phone. I still accepted it though but when I was attempting to use it, I noticed that it had a lot of issues and pop-up messages which annoyed me. When I asked him what he had done to the phone before handing it to me, he said that the phone had a lot of viruses and malwares. I attempt to hard reset it through recovery mode and through the phone system itself but it was no use, it still goes through the same window "Unfortunately, CPS has stopped" on both hard reset attempts. It also keep installing apps that has korean or chinese women on the icons. It keeps spamming any app installations when I connect it with my WIFI connection.
Also, any other issues was that when I attempt to flash the stock rom of it using ODIN3_v3.10.7, it doesn't recognize the device, I also attempt it to connect the device as USB storage and I can still read the device using adb devices from CMD and but still no go with ODIN3. I even attempted having the device go through recovery mode but still no go too. I attempt to install Malwarebytes app but it doesn't ready any viruses or malware on the device.
Just to let you guys know also that when I attempt to do the download mode, it just shows 3 options, recovery, fast boot and normal boot.
This is kind of sucks to my end and I really need help with it. I will really appreciate it if anyone can help me on this.