Database Develop

[KERNEL][CM12/CM11/AOSP] Donkey Kang Kernel - V3.8 (FINAL - discontinued)

for Moto G
Smooth, power efficient and featured
supporting CM11, CM12 and AOSP Roms
Hotplug Drivers:
- Modified Aero_Hotplug (default)
- Faux's Intelliplug
- MpDecision
Custom Features:
- CPU Underclock
- GPU underclock/overclock
- Default CPU Govs tweaked and optimized
- Add Intelliplug/Intellidemand (tweaked)
- Added SmartAssFalcon (tweaked)
- Added IntelliMinMax (tweaked)
- LCD Kcal Control
- DoubleTap2Wake / Sweep2Wake
- USB Fast Charge
- LCD Notify / PowerSuspend V1.5
- Faux's IntelliThermal V2
- Faux's Sound Control
- Power Efficient WorkQueues
- Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
- Ultra Kernel Samepage Merging
- Extra ram free (reduced loggers)
- Kexec patched (only CM12 version)
Optimizations:
- Updated to last CM11/CM12 developement
- Built with Linaro 4.9.3 / Gcc 4.9 (ArmV7 optimized) - Sabermod 4.8.4
- Performance & Energywise flags systemwide (+O2/+O3)
- TCP optimizations (faster locks, balanced power comsumption)
- Heavily tweaked and optimized workqueues
- Sched powersave and performance tweaks
- Kgsl & CpuFreq & Futex optimizations
- Compression & Crypto optimized
- Better ramdomness implementations
- Fixed SimpleOndemand GpuFreq governor
- Added Faux's implementation to msm_cpufreq GpuGov
- Much more (check my git source for further info)
Thanks to:
- Cyanogenmod team, AOSP and Motorola Mobillity LLC, dhacker, savoca, alberto76, yoshishapow, faux123, NeoBuddy, Blechd0se, Quarkx, Klozz, anerik, Shivam Kuchhal, Yank555.lu, Pinkflozd, and so many other great devs (sorry if I'm missing anyone)
DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, or any other damage you may produce. Read carefully and make sure you know what you are doing. Remember, YOU are choosing to make these modifications, so you responsible for the results. AND PLEASE; AS THIS IS ONLY FOR CM12/CM11/AOSP[/U] BASED ROMS. DO NOT FLASH IT ON STOCK/GPE.
Community 'Niceness' common ground:
- Don't ask for ETAs, remember... patience is a virtue.
- If you got some bug or problem to report, be nice, clear and try to provide evidence I can work with (logcats, etc.)
- If you don't know how to do that, check this link: https://plus.google.com/u/0/+PaulReioux/posts/BcWrhEr1JCz
- If you need some help on how to behave among other XDA people, you can check this too, LOL:
http://www.xda-developers.com/androi...m-user-xda-tv/
XDA:DevDB Information
Donkey Kang Kernel, KERNEL for Moto G
Contributors
fermasia
Source Code
ROM OS Version: 4.4.x KitKat / 5.x Lollipop
Version Information
Status: Beta
Created 2014-11-15
Last Updated 2015-1-10​

RELEASES: (developement of this kernel has been discontinued,
and I'll be giving no support for this kernel anymore!!)
THIS LITTLE FILE YOU ARE DOWNLOADING, TOOK A BIG EFFORT.
SO PLEASE, IF YOU APPRECIATE MY WORK, HIT THE THANKS BUTTON) :good:
Version 3.8 - CM12/Aosp Lollipop - [03/01/15]
Version 3.8 - CM11/Aosp KITKAT - [03/01/15]
Version 3.7 - CM12/Aosp Lollipop - [31/12/14]
Version 3.6 - CM12/Aosp Lollipop - [27/12/14]
Version 3.5 - CM12/Aosp Lollipop - [20/12/14]
Version 3.2 - CM12/Aosp Lollipop - [16/12/14]
Version 3 (beta - CM12)
Version 3 (alpha3 - CM12)
Version 3 (alpha - CM12)
Version 2 (beta - CM11/Aosp KitKat)
Version 1.1 - Regular ZIP (CM11/Aosp KitKat)
Version 1.0 - AnyKernel ZIP (CM11/Aosp KitKat) / http://d-h.st/SnK
How to Install
- Boot into recovery (tested on TWRP, should work fine on CWM/Philz)
- Wipe Cache and Dalvik
- Flash .zip
- Reboot & enjoy

CHANGELOGS:
Version 3.8 - KitKat
- Kitkat support resumed, including all features from the CM12 version, except for kexec patches.
Version 3.8 - CM12
- Kexec Hardboot patches applied (multirom compatible)
Version 3.7 - CM12
- Reverted power efficiency patches that were causing SODs
Version 3.6 - CM12
- Sorted out Interactive Gov getting stuck on max freq
- Re-tweaked Aero-Hotplug and IntelliMM tunables
- Applied some battery saving patches
- Built with Sabermod 4.8.4 and back to 02 flags.
Version 3.5 - CM12
- Added Double Tap 2 Wake and Sweep 2 Wake (testing) - disabled by default
- Added USB fast charge (testing)
- Added IntelliMinMax governor and adapted/retweaked it for our device
- Added Intelithermal V2 - enabled by default
- Combined LCD Notify and PowerSuspend (when pwsusp is disabled Lcd Notify will operate)
- CPU underclock
- GPU underclock and overclock
- Various sched, lowmemorykiller and workqueues optimiations
- Built with Linaro 4.9.3, and own optimization flags
- Governors optimized and re-tweaked
- More battery saving and stability optimizations
Version 3.2 - CM12
- Solved random-reboots (as far as I've tested, you might get ocassional problems when toggling the hotplug driver).
- Added Faux's Intelliplug and IntelliActive/Demand governors.
- Now the hotplug drivers are toggleable (mpdecision/aero_hotplug/intelliplug) - Aero_Hotplug is located in userspace (!) in Faux's Control App, or if using Trickstermod, Aero-Hotplug will be active if Intelliplug (and mpdecision, of course) are disabled.
- Default combo: AeroHotplug + Ondemand gov
- Better compression optimizations.
- Samepage merging enabled by default.
Version 3 - beta
- Switched from MyFluxi's hotplug driver to Aero_Hotplug (thanks to @Blechd0se and @Quarx)
- Adpated and tweaked hotplug driver
- Readded powersuspend, bumped to v1.5 and optimized settings.
- IOsched power saving optimizations
- Dumped Intellidemand, Intelliactive, OndemandPlus and Weathley governors (for now)
- Added SmartAssFalcon governor (thanks to @YoshiShaPow)
- CPU Min Freq set to 192000 (again)
- Picked some commits to make the kernel fully compatible with Alberto76's build (to be tested)
- Reworqued workqueues even more, following blechd0ses's implementation for aero_hotplug and added more tweaks
- Added LZ4 kernel compression to fasten bootup process
Version 3 - alpha 3
- Added powersuspend (for now) - got to enable it through any kernel tweaker, thought.
- IOsched optimizations
- Applied several fixes for diff. mem leaks
- Added crypto optimizations
- Added GPU overclock (to be set in any kernel tweaker)
- Min CPU freq set to 192000
- Power efficient workqueues
- Added Faux's sound control support
- Randomness and cpu-freq optimizations (optimized interactive and ondemand governors)
- TCP performance and stability tweaks
- Much more!
Version 3 - alpha
- Based on the official CM12 source (rebuilt from scratch).
- Compiled with Linaro 4.9.2
- Added msm-hotplug (alongside mpdecision, can be toggled)
- Defaulted to 1 cpu and 300000 freq while lcd is off.
- Added LCD Notify
- Optimized GPU / SimpleOndemand GPU gov working with msm-hotplug (not mpdecision)
- Added more IO schedulers
- Added LCD KCAL
- TCP and other various optimizations
Version 2
- Added MSM Hotplug by default - huge thanks to @savoca for his Titan sources and help
- Simple Ondemand GPU governor working fine (no reboots)
- CPU freq lower limit 192000
- GPU max freq 533mhz
- Optimized CPU governors for msm-hotplug
- Optimized workqueues management
- LCD Notify
- Ramdisk tweaks
- A really big bunch of optimizations and fixes to make hotplug more efficient
Version 1.1
- Dropped AnyKernel template.
- Added some ramdisk tweaks and defaults.

Waiting fa tha linkz

OldYellowBricks said:
Waiting fa tha linkz
Click to expand...
Click to collapse
Have just posted the link, check the second post. :good:

Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app

Is the function home2 wake available on your kernel?

You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app

syrkles said:
Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Yes.

Mchasard said:
Is the function home2 wake available on your kernel?
Click to expand...
Click to collapse
If you mean dt2w, no, it's stated in the op.

KDB223 said:
You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.

fermasia said:
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.
Click to expand...
Click to collapse
Okay then. I'll try it out and report.
Sent from my Moto G using XDA Premium 4 mobile app

wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 2014-11-09_13.31.zip

OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up

Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
gonna try a clean flash of CrDroid and I'll get back in 10 mins I guess okay?

Working great on liquidsmooth milestone. Thanks for the solid work Dev.
Sent from my Moto G using XDA Free mobile app

OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).

Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)

Just flashed it, EVERYTHING works beautifully - WiFi, camera, network - EVERYTHING.
Thanks a lot Mr. Dev
EDIT : On an (unconverted) XT1033
Sent from my Moto G using XDA Premium 4 mobile app

fermasia said:
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)

[KERNEL][5.1.1][GCC 5.3] Omni kernel (30/12/2015)

Overview:
This is a custom kernel based on Omni sources for our legendary i9000. This is only for 5.1.1 roms and no other version of android will be suppported
It seems to work on CodeROM too, thanks @falconscrest123
>The zip you will download is flashable via recovery but you have to disable signature verification
>> Use devil kernel manager or NStools to edit the kernel settings
Features :
- Multiple CPU governors (lulzactive, smartassV2, wheatley, lagfree, ondemandX)
- Tweaked smartassV2
- BFQ, Zen, VR & SIOPLUS I/O schedulers added
- Tweaked VR
- New TCP algorithms (westwood is default)
- Bigmem, up to 430mb
- Kernel compressed with XZ
- Compressed initramfs
- Dynamic page writeback
- Custom ARM & INT voltages
- Voltages fixed for more stable OC
- Selectable GPU OC
- Fast charge
- BLX
- Live OC
- FULL O3 optimisations
- Call volume hack
- Touchwake
- BLN
- Zram
- Swap / Zram optimisations
- LMK tweaks
- SLQB memory allocator
- NEON optimized crypto routines
- Voodoo color
- SquashFS support (module)
- EXfat support (module)
- 720p patched bigmem libs
- Built from the latest Omni source
- Built using custom Cortex-A8 optimized UBERTC 5.2.1 toolchain of @Cl3Kener
Todo:
- Make CGROUP_TIMER_SLACK work
- Brain F*ck Scheduler (well don't mind the censoring xD)
- GPU driver to DDK [email protected] ... for now it breaks everything
- Fixing the remaining issues. After a deeper look at the code, there are so much of things to do .... what a pity humberos left this device.
- You say ...
What I wont do :
- Enable TV out
- Upgrade linux version
- Add useless CPU governors or I/O schedulers
- Add CMA
If some developer wants to help me to add more features, go ahead!
Please use it at your own risk! I am not responsible for any damage that may occur to your device.
Download :
http://www67.zippyshare.com/v/2b6CWcT8/file.html
Contributors:
@Coldwindofnowhere
@xc-racer99, for his help on setting up my Github
@(°_o), for his script
@humberos
@DerTeufel1980
@kasper_h
Source Code:
https://github.com/Coldwindofnowhere/android_kernel_samsung_aries
Custom built UBERTC with A8 optimisations : https://bitbucket.org/Coldwindofnowhere/
Version Information:
Status: WIP
Created 2015-10-02
Last Updated 2015-12-30
>If you like my work, hitting the thanks button won't hurt you<​

Reserved

Coldwindofnowhere said:
Reserved
Click to expand...
Click to collapse
Kernel is finished or WIP? i flashed this kernel my device struck at boot logo have any one tried this?

Audiracecar90 said:
Kernel is finished or WIP? i flashed this kernel my device struck at boot logo have any one tried this?
Click to expand...
Click to collapse
I haven't tested it. Reset your phone and try to delete all the .so files in the /system/lib/ directory of the flashable zip and then flash it again. It should work like that.

Coldwindofnowhere said:
I haven't tested it. Reset your phone and try to delete all the .so files in the /system/lib/ directory of the flashable zip and then flash it again. It should work like that.
Click to expand...
Click to collapse
ok mate

I've just uploaded a new build, can someone tell me if it's booting this time ?

Coldwindofnowhere said:
I've just uploaded a new build, can someone tell me if it's booting this time ?
Click to expand...
Click to collapse
just flashed it and its booting ...thanks ....good to go!!!!!

[EOL][KERNEL][STABLE][TW][O][8.0][ERH1][31.08.18][SM-G935F/FD] SuperKernel V3.1.0

SuperKernel for SM-G935F/FD/K/L/S/W8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports all touchwiz roms 6.0.1 on BPH6 base and higher
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Please check Question and Answer Thread first!
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
SuperMan-Rom, a Touchwiz based rom made by myself!
Features of this Kernel:
- Build with latest official google toolchain v4.9
- Build with ERH1 kernel source!
- Latest Linux version 3.18.120, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (ERG2)
- Frandom Support
- Thunderplug hotplug driver can be selected in aroma (only for advanced users!)
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- Fsync toggle
- LED Control
- Charging control
- HMP control
- Full CPU/GPU control in synapse
- DVFS in Synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV
- GPU OC to 806 Mhz
- Init.d Support
- NTFS file system enabled
- CIFS/NFS file systems enabled
- F2fs supported
- Allow ADB-Insecure
- Wlan Wakelock decreased
- Fully controllable with synapse
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
Download:
Marshmallow V1.X:
V1.9.7 on AndroidFilehost
Nougat V2.X:
V2.11.0 on AndroidFilehost
Oreo V3.X:
V3.1.0 on AndroidFilehost
Download via GrifoDev
All old releases
Bugs/Problems:
- None
Instructions:
0. Make a backup of your current stock kernel in TWRP, just in case you want to go back
1. Install a custom recovery for your phone, like this one here:TWRP
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu, phh's root, magisk and all things that modify your boot.img
7. Wipe cache and dalvik cache (recommand)
8. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal​
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec (for the great FP fix!!)
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
- UpInTheAir for his great Synapse implementation
XDA:DevDB Information
SuperKernel for hero2lte, Kernel for the Samsung Galaxy S7 Edge
Contributors
Tkkg1994
Source Code: https://github.com/GrifoDev/SuperKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.1.0
Stable Release Date: 2018-08-31
Created 2016-05-30
Last Updated 2018-09-25

Changelog:
Old Changelogs:
SuperKernel V1.0:
- Changes compared to stock:
- updated CPUfreq drivers
- updated to latest stable linux (3.18.34)
- updated zram/zsmalloc and zswap for better ram management
- implemented tasks adj tree
- updated ext4
- updated crypto files
- added UKSM
- updated workqueue and sched features
- added gentle fair sleepers switch
- added new governors, ioscheds and tcp
- backports from 4.0 kernel
- many more things (already over 1000 changes compared to stock!!!)
- detailed history
SuperKernel V1.1:
- fixed fingerprint support, thanks to @Jesse Chan who found the right files to delete!
- arm64: mm: support ARCH_MMAP_RND_BITS
- int_sqrt.c: Correction square root algo with naming
- int_sqrt: Improve 3x faster integer sqrt
- mm: mmap: add new /proc tunable for mmap_base ASLR
- mmc: core: Expose use_spi_crc module parameter in sysfs (and disable it to gain perfomance)
- tima, knox and all "bad" samsung related configs are disabled now!
- over 100 updates in kernel/sched and in kernel/rcu to gain performance and better batterylife
- as always, visit github to see what exactly changed!
SuperKernel V1.2.1:
- Reverted back some changes I made in kernel/sched and kernel/time -> Probably fixed the random reboots (I never had one before, so you need to test this)
- Added the requested ROW iosched
- Added UC/OC frequencies thanks to @Jesse Chan (Kernel detects if you phone is capable or not for OC (jesses work), I added a check that only Grade A phones have full OC)
- added DAX to fs
- Many /mm and filesystem Updates (for ext4, ext3, ext2 and f2fs)
- Applied Jesse's fingerprint lag fix
- updated kernel/locking
- implemented Zen-tune V4.5
- cfq-iosched: fix the setting of IOPS mode on SSD
- More changes on github
SuperKernel V1.2.5:
- changed ramdisk compression from lz4 to gzip (which should fix systemless xposed)
- add a fsync toggle to enable and disable fsync
- added async from HTC
- Use erandom functions
- added wakup toggle for wlan
- mm: Allow for Exynos swap to be enabled
- enabled 2 additional lower CPU steps
- update "mm/zsmalloc: don't fail if can't create debugfs info"
- updated cifs/nfs/nfsd and filesystems
- updated memory management (page_alloc, vmstat, etc)
- added new z3fold driver
- probably made fingerprint scanner a little big faster
SuperKernel V1.3.1:
- Updated ramdisk to APF2
- Updated linux to 3.18.35
- removed the red latter at start up (you really really wanted that )
- Fixed random reboots from 1.3 in superman rom
- added a wakelock fix who should fix some google wakelocks
SuperKernel V1.4:
- completely reworked my w. Wipe cache and dalvik cache (recommand)
hole source code, now available under: Github
- Updated ramdisk with latest supersu patch
- many updates in /base/power/opp
- backports from 3.19 branch
- interactive updates (even more smooth now)
- added kasan for arm64 devices
- overall smoothness improved
- tested over one day, not a single reboot till now
SuperKernel V1.7:
- fixed phone turning on when offline charging
- Updated base and ramdisk to latest BPH6 source, this kernel will only work on BPH6 ROM!!!!
- added full synapse support, thanks to UpInTheAir (I adapted his implementation to work on S7)
- Updated linux to 3.18.39
- added f2fs support for /data
- fixed private mode not working after a reboot
- fully remade the whole source tree to get you the best experience!
- fixed the tcp bug which would otherwise make your phone vulnerable
- some other backports
- updated workqueue
- switched to 7.0 sabermod toolchain
- many more things I may forgot
SuperKernel V1.8.5:
- Started from scratch on BPHJ source code
- No more freezing, not a single problem left anymore!
- Updated to 3.18.42 linux (latest)
- Merged some new linaro patches into kernel
- f2fs should now work (and stay) on partitions you have chosen
- HMP opimizations added (tunable in synapse)
- GPU UC removed for now
- CPU OC/UC enabled, but stock freqs are default on first flash
- Disabled PEWQ (can be enabled in synapse)
- Updated thermal
- Disabled task ADJ tree
- enabled hmp packing
- crypto updated
- cpufreq some small updates
- BPIF ramdisk
- Selinux audit configurable
SuperKernel V1.9:
- Based upon BPJ7 source code
- Updated to linux 3.18.44
- added GPU OC to 806Mhz (thanks to @lyapota)
- updated ramdisk to BPJ7
- fixed some battery settings in synapse
- updated busybox to 1.26
- patched CVE-2016-5195
- changed behavior of cpu on high freqs a bit
SuperKernel V1.9.2:
- Updated to BPJG source drop
- Updated ramdisk to BPJG source
SuperKernel V1.9.5:
- This kernel is only for MM!
- Ramdisk base changed to BPL3 (source base is still the same)
- Updated linux to latest 3.18.45 version
- Backported most crypto drivers form 4.4 mainstream linux
- Enabled new crypto drivers and optimizations
- Updated random drivers
- Updated synapse, hopefully all is up to your needs now
- Added thunderplug hotplug (keep in mind that playing with thunderplug settings may lead to SOD)
- Added a special tab for hotplug drivers: Stock, disabled or thunderplug
- Updated busybox
- Updated script to create an init.d file if not existing
- Fixed LED fading in synapse
- statenotifier enabled again for thunderplug
SuperKernel V1.9.6:
- Based on latest BPL3 source drop release
- Fixed adaptable storage problem
SuperKernel V1.9.7:
- Rebased on latest BPLB Kernel source drop
- Updated ramdisk to latest BPLB
- Updated Linux version to 3.18.46
SuperKernel V2.0:
- Only for NOUGAT and TOUCHWIZ roms
- Rebased on latest DPLT base
- Latest DPLT ramdisk
- Latest f2fs backport from 3.18.y branch
- Maple iosched added (needs testing)
- selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
- UPSTREAM: capabilities: ambient capabilities
- BACKPORT: full hardened usercopy backported
- mnt: Add filesystem private data to mount points
- New DVFS tab in synapse
- Updated all mcRegistry files to Nougat
- Changed toolchain to selfcompiled GNU 6.3 a53 optimized
- Sqlite binary updated
- Fstrim added
- Busybox changed to sbin/busybox (needs to be at this directory otherwise synapse won't work!)
- Some other things I may forgot
SuperKernel V2.0.1:
- Linux updated to 3.18.47
- busybox detection enhanced (you can now install to /sbin, system/xbin or su/xbin)
- State notifier disabled by default
- Allow all cores to go to highest freq
- People report working deepsleep so if it does NOT work for you, give me your wakelock stats, otherwise that's not helping anyone
SuperKernel V2.0.2:
- Updated ramdisk to DQAS
- Changed some settings in wakelock tabs for synapse (deepsleep issue was produced setting to extreme levels in synapse)
SuperKernel V2.1.5:
- Based on latest DQB3 release
- Updated Linux version to 3.18.48
- Updated ramdisk to DQB3
- Updated all mcRegistries to DQB3
- Added HID gadget keyboard/mouse patch
- Updated android binder driver
- Also one file to flash for all variants
SuperKernel V2.2.0:
- Based on latest DQB7 source drop release
- Updated to latest DQB7 ramdisk
- Fake knox 0x0 (as in superman-rom 2.2 or superstock-rom 2.5) (credits to @lyapota )
- Fixed init.d not working correctly sometimes
SuperKernel V2.4.2:
- Completly rebased on top of superstock kernel
- Based on latest DQCG release
- Updated ramdisk to DQCG release
- Added and reworked scripts to fake knox (should also work with supersu now)
- Updated conservative and ondemand govenror
- Added PWM flicker free patch
- Fixed safetynet failing sometimes
SuperKernel V2.4.3:
- Updated Zen-tune to V4.10 version (only minor changes)
- Fixed thunderplug showing errors in synapse
- killed PWM flicker free due to many broken stuff
- mcRegistry files have been upgraded to DQCG
- Reverted many sched patches, I think general performance is much better now (maybe placebo idk), please let me know your thoughts!
- Fixed some synapse errors here and there, still I haven't had the time to work on cortex brain staying offline, sorry guys
SuperKernel V2.5.0:
- Source updgraded to DQD1 (same as DQD2)
- Ramdisk updated to DQD2
- mcRegistry updated to DQD2
- Fixed external iosched error on Synapse
SuperKernel V2.5.2:
- Ramdisk updated to DQD3
- mcRegistry files updated to DQD3
- Linux version updated to 3.18.51
SuperKernel V2.6.1:
- Updated to DQEF source code
- Updated ramdisk to DQEF
- Added more flags to resetprop (secret mode in browser should work again, at least it did on the s8)
- Updated to most recent f2fs branch from official google supporter
- Updated Linux to 3.18.56
- Updated mcRegistry to DQEF
SuperKernel V2.7.0:
- Based on latest DQFM source code
- Ramdisk updated to latest DQFM
- Updated linux to 3.18.60
- Reverted a patch in one of those linux updates which broke deepsleep in some cases
- Changed code for mcRegistries: they won't get replaced anymore, it just deletes the "bad" file
- Added spectrum support, untested!
SuperKernel V2.7.2:
- Based on latest DQG1 source code
- Ramdisk updated to latest DQG1
- Updated linux to 3.18.66
- Includes GPU libs, so there is no chance after another kernel this will bootloop!
- Since samsung is not updating their kernels very frequently on the s7, I thought I better push out some small updates
SuperKernel V2.8.0:
- DQH8 source drop update
- DQHY ramdisk update
- Linux update to 3.18.70
- Toolchain update to GNU GCC 6.4.0 @djb77
SuperKernel V2.9.0:
- Finally an awesome update to DQIC with a much higher changelist!
- DQIC ramdisk update
- Linux update to 3.18.72
- Updated AIK to V2.9
SuperKernel V2.10.0:
- DQJ1 source drop update
- DQJ1 ramdisk update
- Linux update to 3.18.77
- 6.4.1 toolchain update to @djb77
SuperKernel V2.10.1:
- DQK1 source code shares the same source as DQJ1, that's why it's only a small change
- DQK1 ramdisk update
- Linux update to 3.18.83
- Toolchain updated thanks to @djb77
- Boeffla wakelock control added
SuperKernel V2.10.5:
- DQLF still has the same kernel source code as DQK1
- DQLF ramdisk update
- Linux updated to latest 3.18.91
- Updated toolchain
- F2fs update to latest release
- AIK updated to v3.1
SuperKernel V2.11.0:
- DRAG source code update
- DRAG ramdisk update
- Linux update to 3.18.94
- Toolchain updated thanks to @djb77
SuperKernel V3.0.1:
- This kernel can only be used on OREO stock based roms! (no ports)
- Updated kernel source to most recent ERG2 code
- Updated ramdisk to ERG2
- Changed toolchain to google 4.9 for better compatibility
- Updated AIK to 3.3
- Updated f2fs to most recent available
- Updated linux to 3.18.118
- Added battery store mode
- All previous features are included!
SuperKernel V3.0.2:
- Rebuild from scratch to fix some bugs
SuperKernel V3.1.0:
- Source code based on ERH1
- Updated linux to 3.18.120
- Fixed samsungs mismatch in kernel compilation

Q&A
Below I added some basic Q&A stuff which here so hopefully it will answer most of your questions!
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: I got FC's and other Problems with the kernel, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grapped with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G935F/FD/W8. All other exynos models can work but are UNTESTED
Q: Is this kernel working on Snapdragon 820 variants?
A: No, sadly not.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 it tells you to be sure you're not. So, what do you need to to in case you are still encrypted:
1. Boot into TWRP
2. Select Wipe
3. Select wipe data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the above steps to get rid of your encryption.
Q: Synapse shows no UCI support!
A: Reflash kernel, a script of you may overwrite my synapse config
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash xposed and supersu after every change of kernel!.
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in /ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel (Which has supersu included by default) you can not do much. You have to stick to the two kernels provided in rom. Also when switching kernel, you need to flash all related zips again after changing it. Last tip: Do not use magisk until you really need it for android pay!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.

I will test it:good::fingers-crossed:

back to stock ... huh

Great! Thanks for the kernel!!!

Hope this works nice on your s7 edge too
Sent with my SM-G930F powered by SuperMan

I lost my PIN password after flash

CP68 said:
I lost my PIN password after flash
Click to expand...
Click to collapse
Did you follow all instructions..?

Tkkg1994 said:
Did you follow all instructions..?
Click to expand...
Click to collapse
I flash OK,and I sure I enter correct my PIN but always said incorrect password???

CP68 said:
I flash OK,and I sure I enter correct my PIN but always said incorrect password???
Click to expand...
Click to collapse
You should always flash without a lockscreen. You can update the kernel with a lockscreen tho.
But well, this is not a problem, because you remembered to make a backup before flashing, right?

Faspaiso said:
You should always flash without a lockscreen. You can update the kernel with a lockscreen tho.
But well, this is not a problem, because you remembered to make a backup before flashing, right?
Click to expand...
Click to collapse
yeah ,but when restore,PIN will disappear???

CP68 said:
I flash OK,and I sure I enter correct my PIN but always said incorrect password???
Click to expand...
Click to collapse
It sais; select no lockscreen. After flashing the kernel you can make a new lockscreen...
Sent with my SM-G930F powered by SuperMan

Thanks for your heart work. How long do u think before fingerprint works?
Sent from my SM-G935F using Tapatalk

lowrider82 said:
Thanks for your heart work. How long do u think before fingerprint works?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Samsung basically made it nearly impossible... so we have to remove some libs that the kernel doesn't panic
Sent with my SM-G930F powered by SuperMan

Tkkg1994 said:
Samsung basically made it nearly impossible... so we have to remove some libs that the kernel doesn't panic
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
Damn that sucks...
Sent from my SM-G935F using Tapatalk

Very very very nice!!
But I have a 930f
Is this possible to have 930f version too?
Sent from my SM-G930F using XDA-Developers mobile app

thebigtross said:
Very very very nice!!
But I have a 930f
Is this possible to have 930f version too?
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Why don't you go to the SM-G930F thread? :laugh:
http://forum.xda-developers.com/galaxy-s7/development/kernel-superkernel-v1-0-t3389247

Yes very sorry I didn't check my bad. I already flashed it and testing at now.
It will be possible to have cpu voltage and freq overclocking in nexts release?
Fingerprint need to be fixed absolutely please
I love your work.
Your are the first kernel dev. All other didn't pass the security bypass. Love it.... Continue I'll test all build
Sent from my SM-G930F using XDA-Developers mobile app

thebigtross said:
Yes very sorry I didn't check my bad. I already flashed it and testing at now.
It will be possible to have cpu voltage and freq overclocking in nexts release?
Fingerprint need to be fixed absolutely please
I love your work.
Your are the first kernel dev. All other didn't pass the security bypass. Love it.... Continue I'll test all build
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Voltage is already present, but kernel adiutor can't detect it. I will add synapse support soon.
About fingerprint: no idea how I should manage this
Sent with my SM-G930F powered by SuperMan

[Kernel] BeastMode Kernel vR105 LineageOS (A2017U)

No fancy descriptions here. It's a kernel, it's for the axon 7 (US), and it works.
Features (from what I can remember)
KCAL display driver
Added fiops, zen, row, and sio IO schedulers
Enabled westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, illinois, and dctcp tcp congestion algorithms
Slight overclock to LITTLE cluster (1.72GHz) and big cluster (2.26ghz)
GPU overclock (652MHz)
Performance tweaks
Tweaked out ramdisk
F2FS support
init.d support
Adrenoboost
Touch input boost
Wake lock controls for various things >_>
Fsync on/off support
exFAT (nofuse) support
Enabled core ctl in kernel hotplugging
Enabled qhmp scheduler
enabled HMP cstate aware (is aware of core c-states and tries to schedule tasks on already awake cpus)
Added cleancache and frontswap
Disabled arm "CoreSight"
Enabled zram lz4 compression
Disabled dm_verity kernel wide.
Disabled input debugging driver
Disabled msm remote debugging support
Enabled in-kernel block test/test io scheduler
Disabled ZTE "VLog" and "sdlog"
Disabled cache and m4m error reporting
Disabled panic on correctable cache/m4m errors
Disabled compiling with frame pointers for debugging
much more..
Thanks:
flar2
jcadduono
imoseyon
faux123
dorimanx
savoca
all of team win
all of xda-developers staff
all of xda-developers community (for those i've missed)
of course ZTE for this fantastic device
Google for awesome af Android
________________________________________________________________________________________________
[size=+3]LineageOS[/size]
Download (Enforcing version): BeastMode vR88 for the ZTE Axon 7 (A2017U) now with war_mod
Download (Permisive version): BeastMode vR105 for the ZTE Axon 7 (A2017U) now with war_mod
XDA:DevDB Information
BeastMode Kernel for the Axon 7 (a2017u), Kernel for the ZTE Axon 7
Contributors
freeza, freeza, warBeard_actual
Source Code: http://www.freeza-inc.com/kernelsources/A2017U/N/Stock/Kernel.tar.gz
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: vR105
Stable Release Date: 2017-12-19
Created 2016-12-23
Last Updated 2017-12-20

Changelog
12/19/17-vR105:
Updated almost everything to B32 source
Updated war_mod
Added warmode sysfs entry (/sys/kernel/warmod/warmode) with 0 (disabled) as default. configurable in init.d script
Added android security patches from August-December via the Android Security Bulletin
Ramdisk updated with latest LineageOS version
11/18/17-vR88:
Reborn based on B32/B25 hybrid
Full changelog later
4/18/17-vR45:
Fixes
Resurrection Remix support
4/17/17-vR44:
Disabled overclocking. Didn't provide much benefit and our SoC kind of sucks for OC stability (lower binned probably.)
Tweaks
4/15/17-vR43:
Made little cores behave by forcing them to 1.5GHz by default.
Disabled cstate awareness
4/12/17-vR42:
Removed a bunch of modules and compiled some drivers into kernel
LineageOS support
4/9/17-vR40:
Disabled some debug options in defconfig
Enabled qhmp
F2FS support
4/3/17-vR34:
Core Control is disabled by default (can be re-enabled from /sys/devices/system/cpu/cpu0/core_ctl/disable)
Added a few more wakelock controls (/sys/module/wakeup/parameters/)
3/22/17-vR31:
Added a few more wakelock controls (Thanks @flar2)
Misc fixes
3/21/17-vR30:
Updated to B19 source from ZTE.
3/19/17-vR29:
Fixed NFC until ZTE's B19 source. (Thanks @jimbo77)
3/17/17-vR28:
Updated source a little
Fixed Magisk/NoSuperSU quirks with sim.
3/12/17-vR27:
-Fixed the damn WiFi
-Added magisk compatible NO SuperSU version
2/24/17-vR26:
-Fixed WiFi on permissive
-Updated wlan driver
-Added Zen IO scheduler
2/21/17-vR24:
-Fixed ADB/MTP. ADB shell should launch as root, at least on the permissive version.
-Disabled a bunch of debugging overhead
2/19/17-vR23 (Enforcing only):
-Fixed WiFi
2/17/17-vR22:
-Updated for B15 (7.0/Nougat)
1/30/17-vR15: performance tweaks
-ZTE Nougat F2FS driver
[email protected] f2fs patches
-ZTE Nougat WiFi driver
12/28/16-vR12: attempt #2 at fixing video recording/playback
-more defconfig tweaks
-included B27 library files for mediaplayerservice, camera metadata, cameraservice, and arcsoft night mode.
-that safetynet patch for unlocked bootloader.
12/28/16-vR09: fixed video playback.
-switched wlan driver to CM13 version(R.I.P)
-tweaks to defconfig
12/23/16-vR07: initial release

Lmao
Sent from my Nexus 6P using Tapatalk

Nice

Running on the latest B29, all cool. This device is a behemoth overclocked! Thanks!

Do we have the stock kernel. Just in case we want to rollback?

borijess said:
Do we have the stock kernel. Just in case we want to rollback?
Click to expand...
Click to collapse
Backup the boot partition with TWRP then you can restore it if you want to roll back.

Hey
(i know its for the A2017U)
i am on A2017G , it boots but no audio, maybe i could port your source to A2017G. but the sourcecode link want work.
Thx For your Work.....

VeNuMuS said:
Lmao
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Why??

Thanks for this! Been waiting for a better kernel.
Questions:
- Does it make double-tap-to-wake faster?
- Does it solve the delayed notifications problem?
- Will it bring about world peace?

dank

Bad and Boujee. Nice.

Other than selecting the max overclock values, do you have any recommended kernel settings to get the best from the phone & kernel? Thanks

I'm going to guess it doesn't work with cm13?
It'd be pretty cool if it did, but I wouldn't be surprised if it didn't.

Im on A2017G and for me Sound work.But Gpu not OC for me it show 624 MHz not 652MHz.Can we change it via Kernel Auditor??

whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?

gecko702 said:
whats the best saturation number in KCAL? also when its flashed does it OC or its left stock speed?
Click to expand...
Click to collapse
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.

TheLastSidekick said:
It's left at its stock values. You'll need to specify the overclock, the step is enabled but not selected by default. I use Kernel Auditor with SuperSU and BusyBox to modify the settings, and so far it's worked just fine.
Click to expand...
Click to collapse
What's the safest OC speed without sacrificing too much battery or phone.
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
Is it just me or is the camera faster at taking pics on this kernel?

Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?

dbekan%5 said:
Is it working on cm13 and can you make a Version without overclocking?
How about undervolt? Can i use an app for this?
Click to expand...
Click to collapse
Why would you need a version without overclocking when overclocking isn't enabled by default?

[Kernel][PELT][EAS]Nameless Kernel[4.4.213][R31][z2_row]

! This kernel is based on treble tree,so make sure you are on a treble ROM !
【! From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel !】
! Some profiles from /vendor will be replaced so if you want to fully uninstall this kernel,just dirty flash your current ROM!
If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
#Build for z2 plus but it should work well on pro#
---------Notice-----------
I can say with certain flashing this kernel is safe at all.Kernel will not go on OC freqs if u dont choose OC freqs by using tools like KA(from R12).So in fact u can use this kernel as a non-OC kernel Lol.
But the kernel has a lot of settings that could cause unstable like high OC freqs (2.53/2.46/780/2.0),so its strongly recommend to test the freq you want to use before you set it for daily use.Just lock min and max freq to it and see if theres kernel panic or crashes.If everything is fine,you can choose it for daily use.Or u can try to raise voltage for it and test again.
For every device:
OC 2.26+1.68+624 is stable
For most device:
OC 2.34+1.76+710 is stable
For some device:
OC 2.41+2.0(1.86)+780 is stable
For little device:
OC 2.5+2.0+780 is stable
So if this kernel is good at performance or battery depends on ur settings.Default settings(1.8+1.3+624) prefer battery + smooth.
!!!!!Above all,DONT PLAY PUBG ON OC FREQS IF U DONT HAVE WATER COOLER!!!!!
!!!!!UNDERCLOCK FOR PUBG OR U CAN HARDLY EAT CHICKEN LOL!!!!!
----------------------------
Feature:
-Big cluster OC 2.5GHz
-Little cluster OC 2GHz
-GPU OC 780mHz
-Intellithermal included
-Modified thermal config included
-Sound control added
-A lot of TCP govs
-Ghostpepper from AKT included(Less heat and better performance)
-Sound control added
-Arch power included
-Fsync control added
-A lot of optimization included
-Touch boost can be switch now(disable by default)
-CPU set 2.15+1.59 as default
-Upstream to 3.18.107
-Background tasks can load on both cpu0 and cpu1
I think you neednt do anything about optimization to this kernel because I have already do my best for it XD
Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release(old)
or
https://www.androidfilehost.com/?w=files&flid=267780(new)
Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996
Anykernel repo:
https://github.com/xzr467706992/AnyKernel2
Many thanks to: 
 @mracar (Help me fix audio problem on z2 pro)
@DD3Boh (This kernel is based on his tree)
 @Star_king12 (for awsome works on 4.4 kernel)
 @kenny3fcb (for awsome works on 4.4 kernel)
And thanks everyone works on z2 (pro)

From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel. So go to flash a ROM with 4.4 kernel build in(Latest arrow,aex,etc.),or you ll get problem with video playback and usb.
The latest 3.18 kernel is R19.

R31
Changelog:
- Rebase on CAF "LA.UM.8.4.1.r1-00300-8x98.0"
- Linux 4.4.213
- Merge latest kernel/common
- Update qcacld wlan drivers to "LA.UM.7.6.r1-06700-89xx.0"
- Update simple lmk to v2.25.0
- Increase ZRAM size to 750MB
- Build kernel with clang 10.0.2
- Rebalance cpuset
- Update Anykernel3 and fix error on Android Q system-as-root
- Add msm_irqbalance binary from marlin
- (z2_plus) Restore to original zui touchscreen drivers, fixing touchscreen randomly fails on some devices
- Cleanup some useless commits
- Fix network signal guru not working
- Fix spectrum profile reset after booting
- Fix performance drain after locking screen for a while on some ROM
- Remove OC as it may influence EAS energy balance
- Improve smoothness under mobile data
- Improve app launching time
- Fix up PELT with backports from kernel/common android-4.14
- Move to PELT load tracking for EAS
- Enable iptable ttl target support
- (z2_plus) Add display panel refreshing rate overclock
* Need lock and and unlock (turn screen off and on) after booting or OC wont work.
- Add cpu undervolt
* uv1=undervolt slightly
uv2=undervolt extremely (mostly unstable)
* uv2 can bring about 15% power cost drop down for Kryo HP @ 2.15Ghz
R30
Changelog:
- 4.4.184
- Merge latest caf tag
- Merge kernel/common
- Merge latest qcacld wlan drivers
- Update Clang to 9.0.5
- Update Anykernel2 to Anykernel3
- Move to simple_lmk
- Drop ZRAM size back to 512MB
- Update cpu_input_boost drivers
- Fix some more memleaks
- Support disable FP in latest lineage
- Include sultan's iommu,qos,mdss,cpuidle and many other optimizations
- Upstream f2fs and rapid gc changes
- Allow background tasks load on cpu1
- Slightly optimize touchscreen performance
- Drop z3fold and move back to zsmalloc
- Move back to stock lz4 modules
R29
Changelog:
- 4.4.178
- Rebase on caf's kernel.lnx.4.4.r37-rel branch with latest kernel/common changes merged in
- Update to latest qcacld wlan drivers
- Clang update to 9.0.2
- Gcc update to 9.0.1
- Add hall switch driver
- Upstream f2fs
- F2fs rapid gc support
- Bump up framebuffer boost value of performance profile to 1GHz
- Upstream anxiety io scheduler
- Cleanup defconfig
- Fix log spam on ROMs with hmp perf stack
- Upstream EAS
- Fix some memleaks
- Limit the rate of CPU clock-rate changes
* You can edit it at /sys/module/qcom_cpufreq/parameters
- Boost cpu when lmk decide to kill tasks
* You can edit it at /sys/module/boost_control/parameters/lmk_boost_ms
R28
Change log:
- Update to latest qcacld wlan drivers
- Merge latest caf tag
- Improve idle drain slightly
- Fix USB tethering really
- Remove unused livedisplay drivers
- Underclock cpu on suspend
* You can edit the frequencies in /sys/module/cpufreq/parameters
* Underclock 307mhz+307mhz on suspend for battery profile and 1.0ghz+0.8ghz for balance profile
- Add shenqi_nv support
- Clang 9.0.1
- Improve fp speed slightly
- Remove init.qcom.sh in ramdisk patches and move changes into init.nameless.sh
- More cpufreq and io schedulers bring in
- Boost cpu when launch apps (You can edit boost time at app_launch_boost_ms)
*Default set 500 for balance and 1500 for performance and gaming.
Btw,I m now sure sound problem on aex is not kernel related.The problem is still there even after dirty flash aex.Now I have moved to los by dd3 and everything works fine.
R27
Change log:
- 4.4.176
- Fix -4℃ in KA
(But the cpu temperature is still not accurate because KA is reading a wrong sensor)
- Improve standby.
- Enable iowait_boost.
- Move to dynamic stune boost(Improve battery slightly)
- Updated thermal config
- Move init.spectrum.sh to /vendor/bin
- Fix broken sound in wechat videoplayback&Tik Tok
- Fix phone's mic when headphoes are plugged in
* Thanks to yaro's source
- Encryption (maibe) fixed(ROM support needed)
- Speaker gain is back
- Applied some upstreams from kernel/common
R26
Change log:
- 4.4.174
- Latest caf tag
- Latest qcacld drivers
- Upstream f2fs
- Update fp drivers with yaro's one
- Add support for spectrum
- Support sultan's boost.And you can control it at /sys/module/boost_control/parameters
- Battery improved a lot (at least for me)(About -12%/h under wifi with performance profile on normal usage)
- Fix broken bt,fp and other sensors on aosip,pe etc.
- Switch to mount factory as vendor.
( If you are on a ROM with vendor mount as vendor,what you need to do is
1. Flash twrp with factory support( https://www.androidfilehost.com/?fid=11410963190603913222 )
2. Flash vendor to factory ( https://androidfilehost.com/?fid=962187416754475514 )
3. Flash nameless and it ll work.
*Dont flash v2f after flashing the kernel,otherwise spectrum wont work and vendor ramdisk wont be updated.
)
*If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
Spectrum profiles:
cpubigmax+cpulittlemax+gpumax+gpumin+schedtune.boost-value+sultan-boot-big+sultan-boost-little
Balance(Default):1.8+1.3+510+180+1+0.5+0.8
Performance:2.15+1.59+624+180+10+0.4+0.6
Battery:1.4+1.0+401+180+1+0+0
Gaming:1.6+1.4+510+315+10+0.8+0.8 (For stable pubg experience)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
* Reep for hmp build because its dead.Switch to R23.1 or R24 if you love it.(I rebase hmp build on eas ,but R25 seems not booting,so its time to stop maintain it)
R25
Change log:
- 4.4.172
- Build with clang 8.0.7+gcc9
- Latest caf tag merged in
- Lastest qcacld wlan driver included
- f2fs upstreamed
- Add some memleaks fixes
- tcp partly backported from mainline
- cfq partly backported from mainline
- z3fold support
- memlat support
- upstreamed eas
- vdso patches included
- Switch to aosp's lmk
- Switch to yaro's fpc1020 drivers
R24
Change log:
- Rebase on 4.4.169 with latest caf tags
- Remove all unnecessary changes and upstreams
- Performance seems better than last build
- Fix booting on z2 pro
R20.1
Change log:
- Upstream to 4.4.163
- Build with LiuNian clang 8
- See github for more
R20:
Change log:
- Linux version 4.4.162
- Works on 4.4 compatible ROM only (ROMs with 4.4 kernel build in)
R19:
Change log:
-Upstream to 3.18.124
-Latest caf tags merged in
-HZ=300
-Improve stability on high load
-See more on github
R18
Change log:
-Upstream to 3.18.120
-Latest caf tags merged in
-Upstreamed some drivers
-Double click wake up enable by default(Works on P)
-Add support for hugepage but disabled by default
-Add support for ksm but disabled by default
*If your ROM is build with lineage trees in zuk-devs,hugepage will be enabled if your device have 6GB RAM and KSM will be enabled if your device have 3GB RAM.
-You can see gpu go 100mHz when theres no load this time
-Current information update every 5s
-See github for more changes
*If you are on Pie ROM with volte working.Flash R18[Volte] build or you ll lose volte after rebooting.
R17
Change log:
-Upstream to 3.18.115
-Include a safetynet patch (need test)
-Added an interface to adjust cpu max freq after screen off(in interactive gov)
-Interface to turn on/off cpu input boost
-Dynamic fsync included
-Gpu min freq now down to 180mHz
-Wireguard included
-Latest caf tag merged
-Latest qcacld driver merged
-Performance improve
R16
Change log:
-Build with DragonTC
-Performance improve
-Upstream to 3.18.110
-Latest source merged
-Faster boot-up speed(than last build lol)
-Back to use 2.15+1.59 as default
R15
Change log:
-Revert something that can cause unstable
-Undervolt for less heat(May cause panic on some device when benching, use voltage control to raise voltage if u meet that)
-Some upstreams
R14
Change log:
-Upstream to 3.18.108
-A lot of hotplugs included(Not recommend enable it on our kryo but u can have a try)
-Intellithermal removed because seems that it doesnt work.
-Use another sound control driver those problem may fixed
R13:
Change log:
-Merge latest caf tag
-Use more proper freq table
-Use more proper values for Gpu
-Check if supported before flashing
-Use stock voltage for cpu to fix panic on some device when benching
R12
Change log:
-Upstream to 3.18.107
-Now cpus will not boost to OC freqs when device is booting and I lock it to a lower freq so there will less heat when booting but a bit slower than last version.So OC is quite safe now,cpu OC only when u select an OC freq,u can use this kernel as a non-OC kernel now Lol.
-Fix panic when booting on some bad devices.
-Big cluster OC 2.53 GHz now(Really unstable,I can only stay seconds on it with raising voltage to 1.25v (using voltage control).Hope some lucky guys could have a bench on it Lol.
!!!And do not use this freq for daily use!!!)
-Little cluster 1.86GHz added.
-“Performance” gov have got no performance now(because of those things before so lock min freq to max if u want to use something like performance gov)
R11
Change log:
-Undervolt a bit
-Upstream to 3.18.106
-Latest source merged
-USB fast charge added
R10.5
Change log:
-Fix voltage problem cause by a oversight
-Really less heat on this build because a ****ing problem is fixed Lol
R10
Change log:
-Fix audio on z2 pro
-Switch to GCC 7
-Underclock 1.8+1.3 as default
-Voltage control added
-Intellithermal added
-Fsync control added
-Sound control works
R9
Change log:
-Fix boot problem on aex0416 build
#Old tree with /factory mounting as /vendor is not supported now#
R8
Change log:
-Darkness added
-maple added
-New thermal conf added with less heat
-LMK back to stock
Nameless Kernel R7
Change log:
-Fix lagging cause by LMK
-Upstream to 3.18.105
-ElementalX added
-Zen I/O gov added
-A lot of network I/O gov enabled (westwood default)
-Set gpu 624mhz as default
-Raise voltage for little cluster 1996mhz and gpu 780mhz,it should be more stable now.
Nameless Kernel R6.5
-Not really a new build
Change log:
-Fix performance on AEX5.4.
Try this if u feel performance on aex5.4 is a ****
Nameless Kernel R6.1
for z2 pro only
-Sound fixed(A lot of thanks to @mracar)
Nameless Kernel R6
for z2 plus and z2 pro
change log:
-Sound control added
-GPU now OC 780mHz
-GPU minimal frequency up to 214 mHz so it will be more smooth (Like recent UI)
-Added 1689 mHz for little cluster
-Lower voltage for non-OC frequencies for less heat
-Raise voltage for OC frequencies for stable
-Merge latest source for z2 pro from cosmedd's repo so sound problem should be fixed.

lan toolboxs developer？（huaji

江泽民1926 said:
lan toolboxs developer？（huaji
Click to expand...
Click to collapse
Yeah

Holy shi*t! This OC is outstanding!
I will try on Cosmic.

Found perfect in AEX v5.3
Thx!
Enviado desde mi Z2 Pro mediante Tapatalk

bug detected, no sound works on the mobile @xzr467706992

xino22 said:
bug detected, no sound works on the mobile @xzr467706992
Click to expand...
Click to collapse
ROM?

xzr467706992 said:
ROM?
Click to expand...
Click to collapse
AEX 5.3
Enviado desde mi Z2 Pro mediante Tapatalk

AEX5.4, the system has no sound

XDAMz said:
AEX5.4, the system has no sound
Click to expand...
Click to collapse
Screenshot of aex's stock kernel version plz

Hi! Flashed your kernel on latest Cosmic OS (Full Treble) and both mic and speaker don't work.
Log attached
@xzr467706992

xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
3.18.71 Kernel versión
Enviado desde mi Z2 Pro mediante Tapatalk

Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen

xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
Do you think it has an easy solution? thx!
Enviado desde mi Z2 Pro mediante Tapatalk

Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.

Terminator.J said:
Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.
Click to expand...
Click to collapse
Here the sound also dont work with SELinux on Permissive....

jhobc said:
Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen
Click to expand...
Click to collapse
Audio problem fixed now

xzr467706992 said:
Audio problem fixed now
Click to expand...
Click to collapse
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
---------- Post added at 03:03 PM ---------- Previous post was at 02:40 PM ----------
xino22 said:
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
Click to expand...
Click to collapse
in this new version it gets very hot the mobile just browsing and little more ....
Enviado desde mi Z2 Pro mediante Tapatalk