! This kernel is based on treble tree,so make sure you are on a treble ROM !
【! From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel !】
! Some profiles from /vendor will be replaced so if you want to fully uninstall this kernel,just dirty flash your current ROM!
If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
#Build for z2 plus but it should work well on pro#
---------Notice-----------
I can say with certain flashing this kernel is safe at all.Kernel will not go on OC freqs if u dont choose OC freqs by using tools like KA(from R12).So in fact u can use this kernel as a non-OC kernel Lol.
But the kernel has a lot of settings that could cause unstable like high OC freqs (2.53/2.46/780/2.0),so its strongly recommend to test the freq you want to use before you set it for daily use.Just lock min and max freq to it and see if theres kernel panic or crashes.If everything is fine,you can choose it for daily use.Or u can try to raise voltage for it and test again.
For every device:
OC 2.26+1.68+624 is stable
For most device:
OC 2.34+1.76+710 is stable
For some device:
OC 2.41+2.0(1.86)+780 is stable
For little device:
OC 2.5+2.0+780 is stable
So if this kernel is good at performance or battery depends on ur settings.Default settings(1.8+1.3+624) prefer battery + smooth.
!!!!!Above all,DONT PLAY PUBG ON OC FREQS IF U DONT HAVE WATER COOLER!!!!!
!!!!!UNDERCLOCK FOR PUBG OR U CAN HARDLY EAT CHICKEN LOL!!!!!
----------------------------
Feature:
-Big cluster OC 2.5GHz
-Little cluster OC 2GHz
-GPU OC 780mHz
-Intellithermal included
-Modified thermal config included
-Sound control added
-A lot of TCP govs
-Ghostpepper from AKT included(Less heat and better performance)
-Sound control added
-Arch power included
-Fsync control added
-A lot of optimization included
-Touch boost can be switch now(disable by default)
-CPU set 2.15+1.59 as default
-Upstream to 3.18.107
-Background tasks can load on both cpu0 and cpu1
I think you neednt do anything about optimization to this kernel because I have already do my best for it XD
Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release(old)
or
https://www.androidfilehost.com/?w=files&flid=267780(new)
Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996
Anykernel repo:
https://github.com/xzr467706992/AnyKernel2
Many thanks to:
@mracar (Help me fix audio problem on z2 pro)
@DD3Boh (This kernel is based on his tree)
@Star_king12 (for awsome works on 4.4 kernel)
@kenny3fcb (for awsome works on 4.4 kernel)
And thanks everyone works on z2 (pro)
From R20 , it only support 4.4 compatible ROM since we are having 4.4 kernel. So go to flash a ROM with 4.4 kernel build in(Latest arrow,aex,etc.),or you ll get problem with video playback and usb.
The latest 3.18 kernel is R19.
R31
Changelog:
- Rebase on CAF "LA.UM.8.4.1.r1-00300-8x98.0"
- Linux 4.4.213
- Merge latest kernel/common
- Update qcacld wlan drivers to "LA.UM.7.6.r1-06700-89xx.0"
- Update simple lmk to v2.25.0
- Increase ZRAM size to 750MB
- Build kernel with clang 10.0.2
- Rebalance cpuset
- Update Anykernel3 and fix error on Android Q system-as-root
- Add msm_irqbalance binary from marlin
- (z2_plus) Restore to original zui touchscreen drivers, fixing touchscreen randomly fails on some devices
- Cleanup some useless commits
- Fix network signal guru not working
- Fix spectrum profile reset after booting
- Fix performance drain after locking screen for a while on some ROM
- Remove OC as it may influence EAS energy balance
- Improve smoothness under mobile data
- Improve app launching time
- Fix up PELT with backports from kernel/common android-4.14
- Move to PELT load tracking for EAS
- Enable iptable ttl target support
- (z2_plus) Add display panel refreshing rate overclock
* Need lock and and unlock (turn screen off and on) after booting or OC wont work.
- Add cpu undervolt
* uv1=undervolt slightly
uv2=undervolt extremely (mostly unstable)
* uv2 can bring about 15% power cost drop down for Kryo HP @ 2.15Ghz
R30
Changelog:
- 4.4.184
- Merge latest caf tag
- Merge kernel/common
- Merge latest qcacld wlan drivers
- Update Clang to 9.0.5
- Update Anykernel2 to Anykernel3
- Move to simple_lmk
- Drop ZRAM size back to 512MB
- Update cpu_input_boost drivers
- Fix some more memleaks
- Support disable FP in latest lineage
- Include sultan's iommu,qos,mdss,cpuidle and many other optimizations
- Upstream f2fs and rapid gc changes
- Allow background tasks load on cpu1
- Slightly optimize touchscreen performance
- Drop z3fold and move back to zsmalloc
- Move back to stock lz4 modules
R29
Changelog:
- 4.4.178
- Rebase on caf's kernel.lnx.4.4.r37-rel branch with latest kernel/common changes merged in
- Update to latest qcacld wlan drivers
- Clang update to 9.0.2
- Gcc update to 9.0.1
- Add hall switch driver
- Upstream f2fs
- F2fs rapid gc support
- Bump up framebuffer boost value of performance profile to 1GHz
- Upstream anxiety io scheduler
- Cleanup defconfig
- Fix log spam on ROMs with hmp perf stack
- Upstream EAS
- Fix some memleaks
- Limit the rate of CPU clock-rate changes
* You can edit it at /sys/module/qcom_cpufreq/parameters
- Boost cpu when lmk decide to kill tasks
* You can edit it at /sys/module/boost_control/parameters/lmk_boost_ms
R28
Change log:
- Update to latest qcacld wlan drivers
- Merge latest caf tag
- Improve idle drain slightly
- Fix USB tethering really
- Remove unused livedisplay drivers
- Underclock cpu on suspend
* You can edit the frequencies in /sys/module/cpufreq/parameters
* Underclock 307mhz+307mhz on suspend for battery profile and 1.0ghz+0.8ghz for balance profile
- Add shenqi_nv support
- Clang 9.0.1
- Improve fp speed slightly
- Remove init.qcom.sh in ramdisk patches and move changes into init.nameless.sh
- More cpufreq and io schedulers bring in
- Boost cpu when launch apps (You can edit boost time at app_launch_boost_ms)
*Default set 500 for balance and 1500 for performance and gaming.
Btw,I m now sure sound problem on aex is not kernel related.The problem is still there even after dirty flash aex.Now I have moved to los by dd3 and everything works fine.
R27
Change log:
- 4.4.176
- Fix -4℃ in KA
(But the cpu temperature is still not accurate because KA is reading a wrong sensor)
- Improve standby.
- Enable iowait_boost.
- Move to dynamic stune boost(Improve battery slightly)
- Updated thermal config
- Move init.spectrum.sh to /vendor/bin
- Fix broken sound in wechat videoplayback&Tik Tok
- Fix phone's mic when headphoes are plugged in
* Thanks to yaro's source
- Encryption (maibe) fixed(ROM support needed)
- Speaker gain is back
- Applied some upstreams from kernel/common
R26
Change log:
- 4.4.174
- Latest caf tag
- Latest qcacld drivers
- Upstream f2fs
- Update fp drivers with yaro's one
- Add support for spectrum
- Support sultan's boost.And you can control it at /sys/module/boost_control/parameters
- Battery improved a lot (at least for me)(About -12%/h under wifi with performance profile on normal usage)
- Fix broken bt,fp and other sensors on aosip,pe etc.
- Switch to mount factory as vendor.
( If you are on a ROM with vendor mount as vendor,what you need to do is
1. Flash twrp with factory support( https://www.androidfilehost.com/?fid=11410963190603913222 )
2. Flash vendor to factory ( https://androidfilehost.com/?fid=962187416754475514 )
3. Flash nameless and it ll work.
*Dont flash v2f after flashing the kernel,otherwise spectrum wont work and vendor ramdisk wont be updated.
)
*If you are coming from other kernels,better to do a dirty flash on your current ROM to avoid any strange problems
Spectrum profiles:
cpubigmax+cpulittlemax+gpumax+gpumin+schedtune.boost-value+sultan-boot-big+sultan-boost-little
Balance(Default):1.8+1.3+510+180+1+0.5+0.8
Performance:2.15+1.59+624+180+10+0.4+0.6
Battery:1.4+1.0+401+180+1+0+0
Gaming:1.6+1.4+510+315+10+0.8+0.8 (For stable pubg experience)
Spectrum download:
https://play.google.com/store/apps/details?id=org.frap129.spectrum
https://www.coolapk.com/apk/org.frap129.spectrum
(Chinese)
* Reep for hmp build because its dead.Switch to R23.1 or R24 if you love it.(I rebase hmp build on eas ,but R25 seems not booting,so its time to stop maintain it)
R25
Change log:
- 4.4.172
- Build with clang 8.0.7+gcc9
- Latest caf tag merged in
- Lastest qcacld wlan driver included
- f2fs upstreamed
- Add some memleaks fixes
- tcp partly backported from mainline
- cfq partly backported from mainline
- z3fold support
- memlat support
- upstreamed eas
- vdso patches included
- Switch to aosp's lmk
- Switch to yaro's fpc1020 drivers
R24
Change log:
- Rebase on 4.4.169 with latest caf tags
- Remove all unnecessary changes and upstreams
- Performance seems better than last build
- Fix booting on z2 pro
R20.1
Change log:
- Upstream to 4.4.163
- Build with LiuNian clang 8
- See github for more
R20:
Change log:
- Linux version 4.4.162
- Works on 4.4 compatible ROM only (ROMs with 4.4 kernel build in)
R19:
Change log:
-Upstream to 3.18.124
-Latest caf tags merged in
-HZ=300
-Improve stability on high load
-See more on github
R18
Change log:
-Upstream to 3.18.120
-Latest caf tags merged in
-Upstreamed some drivers
-Double click wake up enable by default(Works on P)
-Add support for hugepage but disabled by default
-Add support for ksm but disabled by default
*If your ROM is build with lineage trees in zuk-devs,hugepage will be enabled if your device have 6GB RAM and KSM will be enabled if your device have 3GB RAM.
-You can see gpu go 100mHz when theres no load this time
-Current information update every 5s
-See github for more changes
*If you are on Pie ROM with volte working.Flash R18[Volte] build or you ll lose volte after rebooting.
R17
Change log:
-Upstream to 3.18.115
-Include a safetynet patch (need test)
-Added an interface to adjust cpu max freq after screen off(in interactive gov)
-Interface to turn on/off cpu input boost
-Dynamic fsync included
-Gpu min freq now down to 180mHz
-Wireguard included
-Latest caf tag merged
-Latest qcacld driver merged
-Performance improve
R16
Change log:
-Build with DragonTC
-Performance improve
-Upstream to 3.18.110
-Latest source merged
-Faster boot-up speed(than last build lol)
-Back to use 2.15+1.59 as default
R15
Change log:
-Revert something that can cause unstable
-Undervolt for less heat(May cause panic on some device when benching, use voltage control to raise voltage if u meet that)
-Some upstreams
R14
Change log:
-Upstream to 3.18.108
-A lot of hotplugs included(Not recommend enable it on our kryo but u can have a try)
-Intellithermal removed because seems that it doesnt work.
-Use another sound control driver those problem may fixed
R13:
Change log:
-Merge latest caf tag
-Use more proper freq table
-Use more proper values for Gpu
-Check if supported before flashing
-Use stock voltage for cpu to fix panic on some device when benching
R12
Change log:
-Upstream to 3.18.107
-Now cpus will not boost to OC freqs when device is booting and I lock it to a lower freq so there will less heat when booting but a bit slower than last version.So OC is quite safe now,cpu OC only when u select an OC freq,u can use this kernel as a non-OC kernel now Lol.
-Fix panic when booting on some bad devices.
-Big cluster OC 2.53 GHz now(Really unstable,I can only stay seconds on it with raising voltage to 1.25v (using voltage control).Hope some lucky guys could have a bench on it Lol.
!!!And do not use this freq for daily use!!!)
-Little cluster 1.86GHz added.
-“Performance” gov have got no performance now(because of those things before so lock min freq to max if u want to use something like performance gov)
R11
Change log:
-Undervolt a bit
-Upstream to 3.18.106
-Latest source merged
-USB fast charge added
R10.5
Change log:
-Fix voltage problem cause by a oversight
-Really less heat on this build because a ****ing problem is fixed Lol
R10
Change log:
-Fix audio on z2 pro
-Switch to GCC 7
-Underclock 1.8+1.3 as default
-Voltage control added
-Intellithermal added
-Fsync control added
-Sound control works
R9
Change log:
-Fix boot problem on aex0416 build
#Old tree with /factory mounting as /vendor is not supported now#
R8
Change log:
-Darkness added
-maple added
-New thermal conf added with less heat
-LMK back to stock
Nameless Kernel R7
Change log:
-Fix lagging cause by LMK
-Upstream to 3.18.105
-ElementalX added
-Zen I/O gov added
-A lot of network I/O gov enabled (westwood default)
-Set gpu 624mhz as default
-Raise voltage for little cluster 1996mhz and gpu 780mhz,it should be more stable now.
Nameless Kernel R6.5
-Not really a new build
Change log:
-Fix performance on AEX5.4.
Try this if u feel performance on aex5.4 is a ****
Nameless Kernel R6.1
for z2 pro only
-Sound fixed(A lot of thanks to @mracar)
Nameless Kernel R6
for z2 plus and z2 pro
change log:
-Sound control added
-GPU now OC 780mHz
-GPU minimal frequency up to 214 mHz so it will be more smooth (Like recent UI)
-Added 1689 mHz for little cluster
-Lower voltage for non-OC frequencies for less heat
-Raise voltage for OC frequencies for stable
-Merge latest source for z2 pro from cosmedd's repo so sound problem should be fixed.
lan toolboxs developer？（huaji
江泽民1926 said:
lan toolboxs developer？（huaji
Click to expand...
Click to collapse
Yeah
Holy shi*t! This OC is outstanding!
I will try on Cosmic.
Found perfect in AEX v5.3
Thx!
Enviado desde mi Z2 Pro mediante Tapatalk
bug detected, no sound works on the mobile @xzr467706992
xino22 said:
bug detected, no sound works on the mobile @xzr467706992
Click to expand...
Click to collapse
ROM?
xzr467706992 said:
ROM?
Click to expand...
Click to collapse
AEX 5.3
Enviado desde mi Z2 Pro mediante Tapatalk
AEX5.4, the system has no sound
XDAMz said:
AEX5.4, the system has no sound
Click to expand...
Click to collapse
Screenshot of aex's stock kernel version plz
Hi! Flashed your kernel on latest Cosmic OS (Full Treble) and both mic and speaker don't work.
Log attached
@xzr467706992
xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
3.18.71 Kernel versión
Enviado desde mi Z2 Pro mediante Tapatalk
Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen
xzr467706992 said:
Screenshot of aex's stock kernel version plz
Click to expand...
Click to collapse
Do you think it has an easy solution? thx!
Enviado desde mi Z2 Pro mediante Tapatalk
Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.
Terminator.J said:
Permissive SELinux perhaps? Seems like there's historically been an "oh hey here's a new release for Z2 Pro... oh sound doesn't work... okay, set permissive SELinux, now it works... then figure out something with DD3Boh/cosmedd/davidevinavil about how they got it to work with enforcing" cycle every time a new ROM/kernel comes out, if memory serves.
Click to expand...
Click to collapse
Here the sound also dont work with SELinux on Permissive....
jhobc said:
Flashed the new kernel (R6) over AEX 5.4 and Cosmic OS but still no sound from the speaker....
Also after the phone boots when I try to enter the sound option the config hangs on black screen
Click to expand...
Click to collapse
Audio problem fixed now
xzr467706992 said:
Audio problem fixed now
Click to expand...
Click to collapse
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
---------- Post added at 03:03 PM ---------- Previous post was at 02:40 PM ----------
xino22 said:
Thx found!!
Enviado desde mi Z2 Pro mediante Tapatalk
Click to expand...
Click to collapse
in this new version it gets very hot the mobile just browsing and little more ....
Enviado desde mi Z2 Pro mediante Tapatalk
Related
for Moto G
Smooth, power efficient and featured
supporting CM11, CM12 and AOSP Roms
Hotplug Drivers:
- Modified Aero_Hotplug (default)
- Faux's Intelliplug
- MpDecision
Custom Features:
- CPU Underclock
- GPU underclock/overclock
- Default CPU Govs tweaked and optimized
- Add Intelliplug/Intellidemand (tweaked)
- Added SmartAssFalcon (tweaked)
- Added IntelliMinMax (tweaked)
- LCD Kcal Control
- DoubleTap2Wake / Sweep2Wake
- USB Fast Charge
- LCD Notify / PowerSuspend V1.5
- Faux's IntelliThermal V2
- Faux's Sound Control
- Power Efficient WorkQueues
- Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
- Ultra Kernel Samepage Merging
- Extra ram free (reduced loggers)
- Kexec patched (only CM12 version)
Optimizations:
- Updated to last CM11/CM12 developement
- Built with Linaro 4.9.3 / Gcc 4.9 (ArmV7 optimized) - Sabermod 4.8.4
- Performance & Energywise flags systemwide (+O2/+O3)
- TCP optimizations (faster locks, balanced power comsumption)
- Heavily tweaked and optimized workqueues
- Sched powersave and performance tweaks
- Kgsl & CpuFreq & Futex optimizations
- Compression & Crypto optimized
- Better ramdomness implementations
- Fixed SimpleOndemand GpuFreq governor
- Added Faux's implementation to msm_cpufreq GpuGov
- Much more (check my git source for further info)
Thanks to:
- Cyanogenmod team, AOSP and Motorola Mobillity LLC, dhacker, savoca, alberto76, yoshishapow, faux123, NeoBuddy, Blechd0se, Quarkx, Klozz, anerik, Shivam Kuchhal, Yank555.lu, Pinkflozd, and so many other great devs (sorry if I'm missing anyone)
DISCLAIMER: Your warranty is now void. I am not responsible for bricked devices, or any other damage you may produce. Read carefully and make sure you know what you are doing. Remember, YOU are choosing to make these modifications, so you responsible for the results. AND PLEASE; AS THIS IS ONLY FOR CM12/CM11/AOSP[/U] BASED ROMS. DO NOT FLASH IT ON STOCK/GPE.
Community 'Niceness' common ground:
- Don't ask for ETAs, remember... patience is a virtue.
- If you got some bug or problem to report, be nice, clear and try to provide evidence I can work with (logcats, etc.)
- If you don't know how to do that, check this link: https://plus.google.com/u/0/+PaulReioux/posts/BcWrhEr1JCz
- If you need some help on how to behave among other XDA people, you can check this too, LOL:
http://www.xda-developers.com/androi...m-user-xda-tv/
XDA:DevDB Information
Donkey Kang Kernel, KERNEL for Moto G
Contributors
fermasia
Source Code
ROM OS Version: 4.4.x KitKat / 5.x Lollipop
Version Information
Status: Beta
Created 2014-11-15
Last Updated 2015-1-10
RELEASES: (developement of this kernel has been discontinued,
and I'll be giving no support for this kernel anymore!!)
THIS LITTLE FILE YOU ARE DOWNLOADING, TOOK A BIG EFFORT.
SO PLEASE, IF YOU APPRECIATE MY WORK, HIT THE THANKS BUTTON) :good:
Version 3.8 - CM12/Aosp Lollipop - [03/01/15]
Version 3.8 - CM11/Aosp KITKAT - [03/01/15]
Version 3.7 - CM12/Aosp Lollipop - [31/12/14]
Version 3.6 - CM12/Aosp Lollipop - [27/12/14]
Version 3.5 - CM12/Aosp Lollipop - [20/12/14]
Version 3.2 - CM12/Aosp Lollipop - [16/12/14]
Version 3 (beta - CM12)
Version 3 (alpha3 - CM12)
Version 3 (alpha - CM12)
Version 2 (beta - CM11/Aosp KitKat)
Version 1.1 - Regular ZIP (CM11/Aosp KitKat)
Version 1.0 - AnyKernel ZIP (CM11/Aosp KitKat) / http://d-h.st/SnK
How to Install
- Boot into recovery (tested on TWRP, should work fine on CWM/Philz)
- Wipe Cache and Dalvik
- Flash .zip
- Reboot & enjoy
CHANGELOGS:
Version 3.8 - KitKat
- Kitkat support resumed, including all features from the CM12 version, except for kexec patches.
Version 3.8 - CM12
- Kexec Hardboot patches applied (multirom compatible)
Version 3.7 - CM12
- Reverted power efficiency patches that were causing SODs
Version 3.6 - CM12
- Sorted out Interactive Gov getting stuck on max freq
- Re-tweaked Aero-Hotplug and IntelliMM tunables
- Applied some battery saving patches
- Built with Sabermod 4.8.4 and back to 02 flags.
Version 3.5 - CM12
- Added Double Tap 2 Wake and Sweep 2 Wake (testing) - disabled by default
- Added USB fast charge (testing)
- Added IntelliMinMax governor and adapted/retweaked it for our device
- Added Intelithermal V2 - enabled by default
- Combined LCD Notify and PowerSuspend (when pwsusp is disabled Lcd Notify will operate)
- CPU underclock
- GPU underclock and overclock
- Various sched, lowmemorykiller and workqueues optimiations
- Built with Linaro 4.9.3, and own optimization flags
- Governors optimized and re-tweaked
- More battery saving and stability optimizations
Version 3.2 - CM12
- Solved random-reboots (as far as I've tested, you might get ocassional problems when toggling the hotplug driver).
- Added Faux's Intelliplug and IntelliActive/Demand governors.
- Now the hotplug drivers are toggleable (mpdecision/aero_hotplug/intelliplug) - Aero_Hotplug is located in userspace (!) in Faux's Control App, or if using Trickstermod, Aero-Hotplug will be active if Intelliplug (and mpdecision, of course) are disabled.
- Default combo: AeroHotplug + Ondemand gov
- Better compression optimizations.
- Samepage merging enabled by default.
Version 3 - beta
- Switched from MyFluxi's hotplug driver to Aero_Hotplug (thanks to @Blechd0se and @Quarx)
- Adpated and tweaked hotplug driver
- Readded powersuspend, bumped to v1.5 and optimized settings.
- IOsched power saving optimizations
- Dumped Intellidemand, Intelliactive, OndemandPlus and Weathley governors (for now)
- Added SmartAssFalcon governor (thanks to @YoshiShaPow)
- CPU Min Freq set to 192000 (again)
- Picked some commits to make the kernel fully compatible with Alberto76's build (to be tested)
- Reworqued workqueues even more, following blechd0ses's implementation for aero_hotplug and added more tweaks
- Added LZ4 kernel compression to fasten bootup process
Version 3 - alpha 3
- Added powersuspend (for now) - got to enable it through any kernel tweaker, thought.
- IOsched optimizations
- Applied several fixes for diff. mem leaks
- Added crypto optimizations
- Added GPU overclock (to be set in any kernel tweaker)
- Min CPU freq set to 192000
- Power efficient workqueues
- Added Faux's sound control support
- Randomness and cpu-freq optimizations (optimized interactive and ondemand governors)
- TCP performance and stability tweaks
- Much more!
Version 3 - alpha
- Based on the official CM12 source (rebuilt from scratch).
- Compiled with Linaro 4.9.2
- Added msm-hotplug (alongside mpdecision, can be toggled)
- Defaulted to 1 cpu and 300000 freq while lcd is off.
- Added LCD Notify
- Optimized GPU / SimpleOndemand GPU gov working with msm-hotplug (not mpdecision)
- Added more IO schedulers
- Added LCD KCAL
- TCP and other various optimizations
Version 2
- Added MSM Hotplug by default - huge thanks to @savoca for his Titan sources and help
- Simple Ondemand GPU governor working fine (no reboots)
- CPU freq lower limit 192000
- GPU max freq 533mhz
- Optimized CPU governors for msm-hotplug
- Optimized workqueues management
- LCD Notify
- Ramdisk tweaks
- A really big bunch of optimizations and fixes to make hotplug more efficient
Version 1.1
- Dropped AnyKernel template.
- Added some ramdisk tweaks and defaults.
Waiting fa tha linkz
OldYellowBricks said:
Waiting fa tha linkz
Click to expand...
Click to collapse
Have just posted the link, check the second post. :good:
Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app
Is the function home2 wake available on your kernel?
You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app
syrkles said:
Does this kernel have f2fs support??
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Yes.
Mchasard said:
Is the function home2 wake available on your kernel?
Click to expand...
Click to collapse
If you mean dt2w, no, it's stated in the op.
KDB223 said:
You didn't mention which variant it's for.
Does it work on XT1033 with networks?
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.
fermasia said:
As it's based on CM11 it should support all variants CM support, so yes, it should.
But as I own an xt1032 I haven't tested, and I'm not familiar with any 1033 specific bugs the CM11 base has.
I'd appreciate your feedback, please.
Click to expand...
Click to collapse
Okay then. I'll try it out and report.
Sent from my Moto G using XDA Premium 4 mobile app
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 2014-11-09_13.31.zip
OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
gonna try a clean flash of CrDroid and I'll get back in 10 mins I guess okay?
Working great on liquidsmooth milestone. Thanks for the solid work Dev.
Sent from my Moto G using XDA Free mobile app
OldYellowBricks said:
wifi not turning on. Logs are here:
runnning CrDroid which is CM11 based build date I guess circa 10-29 (which is the latest build for this ROM)
camera and bluetooth is running fine
View attachment 3006288
Click to expand...
Click to collapse
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).
Feyerabend said:
I'm on Crdroid aswell and I'm connected without problems. Try to reboot (or reflash!). So far no problems with the kernel, everything ok! Thank you very much for your work buddy, keep it up
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)
Just flashed it, EVERYTHING works beautifully - WiFi, camera, network - EVERYTHING.
Thanks a lot Mr. Dev
EDIT : On an (unconverted) XT1033
Sent from my Moto G using XDA Premium 4 mobile app
fermasia said:
First, THANKS (I'm gonna cry) for reporting your problem with a logcat and dmesg - lol.
It doesn't look like kernel related, and since Feyerabend got it working, it mustn't be. Try with a fresh & clean install (specially if you've been flashing other kernels, or stuff).
Click to expand...
Click to collapse
Man I tried a clean flash and wifi still doesn't turn on haha. Wonder what's causing the problem (for me at least)
(by clean flash I mean clean for new rom via philz, and flashing crdroid, after that flashing the kernel, and then rebooting)
Welcome to the N0G33K edition Kernel
This kernel is built on the idea of having optimized battery life and performance. A well made balance between these two is what you get.
Read this first
Please do not post requests, because this is my personal kernel and I won't add any stuff I do not want myself (i.e D2W, S2W, AOD, sound control etc). Also I won't add any other support for other devices. Last but not least: I don't reply to questions like: "which governor/scheduler is the best" etc. The choice is all yours.
PS: You need to root yourself (Magisk or SuperSU)
Features
Based on the latest G920FXXU5DPL4 kernel source
Added Linux 3.10.105
Tons of Governors and schedulers added
Compiled with Sabermod 7.0 GCC
Deep sleep and Google Play Services Fix
Enabled Permissive mode
Disabled Knox
Synapse Control
Entropy optimization
Scheduler Improvements
Binder Improvements
Idle Improvements
Other misc optimizations
Download:
V4 https://mega.nz/#!I05xUDLD!7T86PGq2VtTc15VrfFoXhhKth3FIpI4O0gxpTA8vd2s
Changelog:
V1
- Reworked whole kernel
- Optimized battery and performance
V1.1
- Reverted some stuff to test 3
- Fixed Fading LED
V1.5
- Tweaked LMK
- Optimized Workqueue
- Added battery efficiency patches
- AES put to x4 for more speed
- Readahead tweaked
- Vnswap to fast device
- HMP adjusted for more smoothness / battery efficiency
V1.8
- Reverted LMK and Workqueue edits.
- Enabled powereffici�nt Workqueue
- Tweaked Interactive governor
- Added Powersuspend
- Added more Binder changes for UI smoothness
- HMP and Cpuidle improvements.
- LZ4 Compressed
1.9
- Went back to UBERTC 5.3 because N0G33K V1.8 had kernel panics.
- Removed wlan wakelock control and reduced it myself.
- Some other edits and reverts
V2.0
- Reverted ALOT of changes I made in previous versions.
- Updated Kernel source to the latest DPJ2 source
- Compiled with Sabermod 7.0 Toolchain with CCache (should be stable now)
- Updated Linux to 3.10.104
- Backport latest Linux 4.8 random driver (= like super Seeder)
- Backport latest crypto algorithm Chacha20
- Added new battery efficiency patches
- Tweaked interactive governor for better performance/battery.
- Added new governors: Yankactive, Smartmax and Smartmax_eps
- Updated BFQ I/O
- Added dual sim support
- Fixed Invisible CPUset (should actually work now)
- Screen on hotplug disabled (Dynamic hotplug wasnt good enough)
- Added wakelock controls again.
- Updated Synapse
- Patched "Dirty Cow" (CVE-2016-5195) exploit
- Zswap improvements
- Disabled big cores on screen off
- Improved CPUIdle
- Powersuspend hooks added
- and more
V3
Reworked the whole kernel:
- Based on U5DPL4 source
- Powersuspend is out, State Notifier is in.
- Replaced Linux 4.8 random driver with Frandom
- Interactive governor: merged Galaxy S7 Interactive changes (android N changes wont boot, so kept it MM)
- Merged S7 zswap/zpool and zsmalloc android N changes
- Added Impulse governor
- Tweaked I/O Schedulers for our SSD + Zen V2 update
- Xbox control support added and updated to latest upstream (can be enabled in Synapse)
- Noatime as default for better performance
- SafetyNet patched (soon there probably will be a workaround for it...so enjoy as long it lasts)
- More wakelocks toggles added
- Sync on suspend disabled
- Improved Idle drain
- Android OS drain should be better now.
- Removed some other stuff that caused yank like invisible cpusets
V4
- Updated Linux kernel to 3.10.105
- Updated Safetynet patch
- Binder updated to latest Linux 4.6 (smoother UI)
- Backported Linux 4.1.38 random driver and removed Frandom
- DVFS decision mode in Synapse added
- DVFS: scale to 1k instead of 1.2k GHz
- Backported latest CPUidle driver from Linux 4.7 (should give better idle experience throughout the day)
- Other misc optimizations
Credits:
- The Sickness - For his guidance and support
- CODEG33K - He knows why
- Aria.A97 - Intensive daily testing
- Everyone else I cherry-picked from.
Source Code: https://github.com/Noxxxious/Zero
Want to use this in your rom?: PM me first. Disclaimer: I am not responsible for all the damages followed by or to your phone after flashing this kernel. If it bricks, wipes, explodes and you will hold me responsible I will only laugh
XDA:DevDB Information
N0G33K Kernel, Kernel for the Samsung Galaxy S6 Edge
Contributors
Quintz
Source Code: https://github.com/Noxxxious/Zero
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: February 2017
Created 2016-11-13
Last Updated 2017-02-22
Known issues:
- Probably Synapse "backup profile" doesnt work.
F.A.Q. - Frequently Asked Questions
Q: Synapse says no UCI detected
A: Install Busybox to system/xbin
Q: I had a reboot
A: Only report it here if you didn't undervolt and do it with a log.
A2: If you had random reboot without undervolting, then make a proper log please. Which means I need a last_kmsg from right after the reboot.
You create the log by using this command in adb shell or a terminal or use any 3rd party app like Syslog.
Code:
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Does this one work for G925F and will it be rooted?
I wish ppl would support w8. I'd be willing to donate for a good kernel
Will this work on the 925T
Link not work
+1
franci79 said:
Link not work
Click to expand...
Click to collapse
Sent from my SM-N930F using XDA-Developers mobile app
hadkeren said:
+1
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
franci79 said:
Link not work
Click to expand...
Click to collapse
Works fine
Testing now [emoji2]
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
mydonose said:
The kernel is absolutely brilliant. I have approx 2 hours youtube and lost only 22 percent of battery 🔋
Gesendet von meinem SM-G925F mit Tapatalk
Click to expand...
Click to collapse
Stock settings ?
Love this kernel......great work
thank you for sharing your great kernel on the S6 community. Really loving your kernel for my S6 Edge. Running smooth. Keep it going great Kernel developer.
Inverted Sceen
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
edzamber said:
Stock settings ?
Click to expand...
Click to collapse
Yes, nothing changed
Gesendet von meinem SM-G925F mit Tapatalk
kurdiakis said:
I just flashed the kernel with flashify apk and after the reboot all the icons works in the opposite way. If I push the icon on the left side open the apk of the right side. It happens the same with the TWRP recovery. I tried to recover with the copy before the flash and nothing resolves. I have reinstalled the rom totally clean and nothing changes. G920F
Could you help me?
Click to expand...
Click to collapse
U installed kernel for 925f on 920f thats why. There is a way to fix it search....... and use this next time.
http://forum.xda-developers.com/gal...ernel-el-generalissimo-v3-01-10-2016-t3472477
Does anyone know how I can use N0G33K with Magisk hide module? Arter Kernel works for me with Magisk and Im able to use Pokemon go. But with N0G33K Kernel I cant play anymore. Any help? Im using a S6 Edge 925F.
will this work on tmobile s6 edge ith alexis rom ?
lilmikey201 said:
will this work on tmobile s6 edge ith alexis rom ?
Click to expand...
Click to collapse
There is thread for t-mobile users as well, but not this kernel......
Harregukalerik said:
There is thread for t-mobile users as well, but not this kernel......
Click to expand...
Click to collapse
So then the answer is no......
Sent from my SM-G925T using Tapatalk
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with GNU 6.3.1 TC-
-CPU/GPU O.C
-Savoca KCAL-
-upstream F2FS with POSIX ACL fixes-
-upstream EXT4-
-Tweaked Quick Charge 2.0-
-USB Fast Charge - [ only use this option if you use USB 3.0 Port on your PC or Laptop ]
-Cultivation/Blu_active/Lionfish/Hyperx/Relaxed/Chill Cpu Gov-
-FIOPS/Maple/Zen/Sio/Sio+/tripndroid/Vr I/O-
-Chacha20 CRNG-
-Adrenoboost-
-Sound Contol-
-Slimbus O.C for better sound quality-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Dynamic Fsync v2.0-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Zswap-
-ksm-
-Misc Changes-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
Download :
https://www.mediafire.com/folder/ncib6m1sg8dvl/Kenzo-Kate
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
@eng.stk @flar2 @ak @franciscofranco @The Flash @frap129 @billchen1977 @osm0sis
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Source :
https://github.com/GUYVER91
Changelog :
v3.8.0 :
-Prima wlan driver updated to LA.BR.1.3.6_rb1.20
-EXT4&F2FS Updated
-sdcardfs Updated
-Bug Fix
v3.7.9 :
-Merged latest caf changes LA.BR.1.3.6_rb1.20
-improved cpu inactive time
-Upstreamed alarmtimer for less CPU Hog
-Net Updates
-optimized state_notifier & lcd notifier
-improved mass storage gadget configuration
-Updated EXT4
-Bug Fix
v3.7.8 :
-Upstreamed to Linux 3.10.107
-Updated cpuset
-Updated USB driver
-some upstream commits
-Bug Fixes
v3.7.7:
-Use HALL driver from CAF
-Updated state_notifier
-Reduced lot of wakelocks
-Updated F2FS
-Improved FP wakeup latency
-Increased notification LED brightness
-Bug Fix
v3.7.6:
-Upstreamed to Linux 3.10.106
-net & usb updates
-added new backlight dimmer algorithm ( display can go even dimmer )
-camera fixes
-Updated Dynamic Fsync
-PM / devfreq Updates
-Updated F2FS
-Updated sdcardfs
v3.7.5:
1-Fix low power mode video recording failure on roms like : NOS
2-Fix issue with lockscreen charging info on roms like : NOS , AEX
3-Faster wake-up with cpubw boost on screen wake-up
4-Security Updates
5-Random driver Updates
6-EXT4 Updated
7-Crypto Updated
v3.7.4 :
1-Merged latest caf changes LA.BR.1.3.6_rb1.19
2-Prima wlan driver updated to LA.BR.1.3.6_rb1.19
3-Updated EXT4
4- Updated F2FS
5- Updated sdcardfs
6-Updated Sound Control
7- Upstream Updates
8- Silenced some spam logs
v3.7.3 :
-switch to using Linaro 6.3.1 GCC
-F2FS & EXT4 Updated
-Upstream Updates
-security updates
-spectrum profiles Updated
v3.7.2:
-removed UKSM
-Updated KSM
-Updated EXT4
-added some Upstream Commits
-Bug Fix
-Updated Spectrum profiles
v3.7.1
-added support for Spectrum-
-Fix reboot to recovery bug-
-Bug Fixes-
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
--------------------------------------------------------------------------------------------------------------------------------------
if camera stops saving videos after using my kernel , this is a issue with sdcardfs , you can disable it through build.prop ( ro.sys.sdcardfs=true ----> false ) or magisk module.
--------------------------------------------------------------------------------------------------------------------------------------
use Spectrum or EXKM or Kernel Auditor (K.A ) for kernel parameters control.
adreno boost option is not available on K.A
For adrenoboost :
use terminal :
echo 1 > /sys/class/kgsl/kgsl-3d0/devfreq/adrenoboost
* 0 for off , 1 for low , 2 for medium , 3 for high *
-------------------------------------------------------------------------------------------------------------------------------
about colour settings on my kernel :
this is my settings for enhanced colours :
Saturation : 45 , Value: 118 , Contrast : 142
this is stock settings :
Saturation : 30 , Value: 127 , Contrast : 127
Everything works . Superb . Thanks
Sent from my Redmi Note 4 using Tapatalk
Really promising, gonna try it now
Welcome Back Brother @MEGAX91
Compatible with nos ROM ?
black dark man said:
Compatible with nos ROM ?
Click to expand...
Click to collapse
it is compatible with billchen Trees.
MEGAX91 said:
it is compatible with billchen Trees.
Click to expand...
Click to collapse
Just flashed on nos and lost my fp
BTW my fp is goodix .
black dark man said:
Just flashed on nos and lost my fp
BTW my fp is goodix .
Click to expand...
Click to collapse
Never mind got it workin by flashing following file than kernel.
black dark man said:
Never mind got it workin by flashing following file than kernel.
Click to expand...
Click to collapse
Where u get that patch?
Sent from my Redmi Note 3 using Tapatalk
Actually I've pulled something from psndna88's source to make my fork cross-compatible, @MEGAX91 you can pull if you want
Welcome back!
febry_valdy said:
Where u get that patch?
Click to expand...
Click to collapse
this patch was given by @wight554
The return of the best kernel !
EDIT : Supporting fpc and goodix ?
EDIT 2 : Goodix does not work with Dirty Unicorn V11.4 (26052017 build)
it is support external wifi adapter ??
Flashed this on DU and the vibration is lost
Nice to see you back, @MEGAX91
Is it possible to increase the operating frequency for the little cores frequencies? This will be more perfect:good:
SharkEzz said:
The return of the best kernel !
EDIT : Supporting fpc and goodix ?
EDIT 2 : Goodix does not work with Dirty Unicorn V11.4 (26052017 build)
Click to expand...
Click to collapse
use this patch
https://forum.xda-developers.com/showpost.php?p=72438262&postcount=10
Ram makwana said:
it is support external wifi adapter ??
Click to expand...
Click to collapse
yep
A_Random_Guy said:
Flashed this on DU and the vibration is lost
Click to expand...
Click to collapse
yes , vibration on my kernel is disabled by default ( battery saving )
use KA or EXKM to enable it.
Futanari said:
Is it possible to increase the operating frequency for the little cores frequencies? This will be more perfect:good:
Click to expand...
Click to collapse
O.C is useless on new QC SOCs.
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with UBER 6.4.1 TC-
-CPU/GPU O.C-
-Voltage Control-
-Savoca KCAL-
-schedutil Cpu Gov-
-FIOPS I/O-
-Chacha20 CRNG-
-Adreno Idler-
-Sound Contol-
-Slimbus O.C for better sound quality-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Misc Changes-
-Spectrum support-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Flash EAS Patch-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
all EAS users should use this EAS Supported ROM , i won't accept any bug report on any other rom.
Download :
https://www.mediafire.com/folder/2eahxx74oq3wv/Nagatobimaru
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
@eng.stk @flar2 @ak @franciscofranco @The Flash @frap129 @osm0sis
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Changelog :
v1.6 :
-updated Wlan Driver
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
v1.5 :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added Tripndroid I/O Scheduler
-added cpu-boost (optimized for EAS)
-removed CPU OC
-removed voltage control
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
v1.4 :
-Bluetooth: Properly check L2CAP config option output buffer length (CVE-2017-1000251 / BlueBorne fix)
-added Binder changes from O
-Increased max readahead
-removed FP wakelocks ( on kernel side ) like : qbt_wake_source / captouch_ttw_wl
-added 710MHz GPU OC
-reduced memory latency
-Fixed Bluetooth issues
-Fixed overflows on wlan driver
-Fixed issues on Thermal driver
-Bug Fix
v1.3.1:
-Bug Fix
v1.3:
-added SafetyNet Fix
-I/O latency improvement
-hwmon fixes
-Updated F2FS
-Fixed direct references to HZ
-Updated PM/devfreq
-Bug Fixes
v1.2:
-Updated binder
-Updated cfq I/O
-Bug fix
v1.1:
-Fixed Sound issue.
-added Flar2 sound Control
-Bug Fix
v1.0 :
initial release
don't dirty Flash my kernel on any other custom kernel , if you are coming from another custom kernel , first flash your Rom's stock kernel through Fastboot , then Flash my kernel.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you think your battery life is not good enough , use betterbatterystats and find the battery drain causes..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you use CPU O.C steps and your device experiencing random reboot while its on standby mode , it means your CPU can't take it. The 821 Lite is a maxed out 820 , No more room for CPU OC.
Dev. Can you make kernel for miui 9? Of course if you want and have time?
kael2404 said:
Dev. Can you make kernel for miui 9? Of course if you want and have time?
Click to expand...
Click to collapse
will make a MiUi build as soon as i find some free time.
Does it work with Nougat bootloader?
jigs4wkiller said:
Does it work with Nougat bootloader?
Click to expand...
Click to collapse
yes.
what's the difference between this and guyver kernel?
skyline91 said:
what's the difference between this and guyver kernel?
Click to expand...
Click to collapse
Guyver is HMP
Nagatobimaru is EAS
Have some problem with earphone: sound distortions.
On it kernel, on Guyver kernel. AICP-rom, firmware 7.8.22
How to fix? What logs needed?
It default oc to 2.3 GHz?
---------- Post added at 09:35 AM ---------- Previous post was at 08:59 AM ----------
I've got twice reboot when pluging usb to PC.
LikvidatorMax said:
Have some problem with earphone: sound distortions.
On it kernel, on Guyver kernel. AICP-rom, firmware 7.8.22
How to fix? What logs needed?
Click to expand...
Click to collapse
what kind of sound distortion ?
use syslog and take log ( kernel log & Maine log )
357662149 said:
It default oc to 2.3 GHz?
I've got twice reboot when pluging usb to PC.
Click to expand...
Click to collapse
No , kernel don't use OC CPU steps by default.
No such issue here.
send me your /sys/fs/pstore contents after random reboot.
emm..voltage control
zjy2200656 said:
emm..voltage control
Click to expand...
Click to collapse
it does have voltage control ! use Kernel Adiutor
MEGAX91 said:
what kind of sound distortion ?
use syslog and take log ( kernel log & Maine log )
.
Click to expand...
Click to collapse
Hard to describe. After play 30 second normal sound. After that 30second some distortion. Distortion like sizzle, like cable tv when it lost signal.
Then return to normal sound.
Hope it will help
https://drive.google.com/open?id=0B-Qc1XzHUKGbSF9pY2pjdkp1NzA
Do this kernel support mm bootloader cause i tried it on aospex f2fs just stuck on mi logo for 5 minutes so i assumed it failed.
its work epic rom 7.7.20 ?(miui8)
mszain said:
Do this kernel support mm bootloader cause i tried it on aospex f2fs just stuck on mi logo for 5 minutes so i assumed it failed.
Click to expand...
Click to collapse
never tried it on MM bootloader , why woluld you use MM bootloader , while kernel is compatible with N bootloader?!
taylan08 said:
its work epic rom 7.7.20 ?(miui8)
Click to expand...
Click to collapse
No!
AFAIK system changes are needed to properly support an EAS enabled kernel and without them you won't see the power saving benefits.
MEGAX91 said:
never tried it on MM bootloader , why woluld you use MM bootloader , while kernel is compatible with N bootloader?!
Click to expand...
Click to collapse
i tried guyver 2.3 and it also stuck in mi logo, well i guess its time to update to n bootloader
"A kernel is the central part of an operating system. It manages the operations of the computer and the hardware - most notably memory and CPU."
It should be installed via Recovery (TWRP) over any LOS/AOSP 14/15/16/17-Based ROM. It doesn't need any tweaking with any app, just install it and use it.
BUT you can use Boeffla Config app (available here on the next post) or Kernel Adiutor if you like tweaking.
This kernel uses codes from other kernels, as you'd expect in an open-source community, most notably code from Boeffla, SmartPack, Lolz, Ares and Intelli-kernel
It has UNIQUE features like:
- a different "low memory killer" algorithm wrote by me. Extremely simple, but multiple apps can be killed in a batch!
- zcache is disabled for really *freeing* up memory that was used for caching files
- a different default cpu hotplugger. ALL kernels (even LOS/stock) relies on Qualcomm's vanilla MPDecision, I wrote my own
- Tuned CPU governor (it's the default). It's basically the Interactive governor but with a LOT of tuning to match up with the tuned hotplugger. Did you know stock/los roms uses a multi-socket Interactive governor that doesn't match our phone's cpu?
- many many many MANY compiler optimizations not found on boeffla kernel, LOS or anywhere else!
- MANY unused code simply REMOVED to free memory and CPU. People ADD a lot of stuff on a kernel, I like to remove
- compiled with 2019 GCC version 9.1 (instead of the ancient version 4.9 that EVERY ROM uses)
- Your battery will be charged to "real" 100% like TWRP does
- many unstable cpu and gpu governors and i/o schedulers removed. they only wasted space
- ext4 tweaks
- fair scheduler tweaks
- removed 3 touch boosters code.. why so many? just to raise your clock on every single touch?
- Maple i/o scheduler
- lowered "read ahead" of files and inodes.. why would you read something you don't know you'll need?
- lowered maximum i/o requests for lowering ram usage while writing to SD (internal or external)
- removed a lot of DEBUG code.. why release a software with debugging code built-in?
- removed network protocols we would never use
- removed some compatibility code
- removed dynamic fsync, why would anyone want to enable fsync in any moment anyway? it has been disabled by default linux kernel for decades!!
- decreased commit DELAY of file changes from 20s to 5s, which is linux default. there's no advantage in keeping new/modified data on ram for too long
And common features:
- Max cpu voltage set to 1.4v
- Min cpu clock set to 268mhz instead of 300
- Max cpu clock set to 2995mhz instead of 2457
- Max gpu clock set to 657mhz
- Compiled to speed, not size
- Voltage table for undervolting or overvolting
- Charging level for AC, USB and Wireless charger can be set
- LED fading control + brightness
- zen, noop bfq and sioplus i/o governors
Overall your phone will be snappier, and less battery hungry
You can go back to your rom's default kernel by simply installing rom's .zip again. No need to wipe anything ever!
Telegram Group: https://t.me/tunedkernel
If your voice on recordings or whatsapp calls is too LOW, try my fix for that: CLICK
XDA:DevDB Information
TUNED, a LOS Kernel for S5 - Performance and Battery life together!, ROM for the Samsung Galaxy S5
Contributors
fbs
ROM OS Version: Android 10
Version Information
Status: Stable
Stable Release Date: 2020-10-21
Created 2019-01-28
Last Updated 2020-10-23
Tuned Kernel versions will be attached here, the build date is at the file name.
com.ktoonsez.KTmonitor.1.apk is a little app that will show to you each cpu core clock and gpu clock. Please hold the red button and put at most 100 at "Update Speed". Don't touch the other options because they're buggy!
2.5.20-boeffla-config-v2.apk is the Boeffla Config App, where you can setup most of this kernel's options
klte = SM-G900F, SM-G900M, SM-G900R4, SM-G900R7, SM-G900T, SM-G900V, SM-G900W8, SM-S902L
klteduos = SM-G900FD, SM-G900MD
kltedv = SM-G900I, SM-G900P
kltekor = SM-G900K, SM-G900L, SM-G900S
kltechn = SM-G9006V
CLICK ON THE LINK BELOW WITH YOUR MODEL ON ITS NAME (KLTE or KLTEDUOS or KLTEDV or KLTEKDI or KLTEKOR or KLTECHN) TO DOWNLOAD:
Reserved
300119
- possible fix for encrypted devices and f2fs file system (f2fs is buggy on every s5 kernel, don't use this)
150219
- more overclocking on cpu and gpu
- sdfat updated
- tuned hot plugger enhanced
- xor and square root algorithms optimized for ARM
- boot time maybe a little faster with LZ4 compression (that's why kernel seems bigger)
- removed "read-ahead" code from kernel, don't bother changing read_ahead_kb because it won't work
- zcache (not zswap/zram) back on for now
170219
- 266mhz undervoltable again.
- f2fs removed for now
- ext4 read_ahead blks reduced but not eliminated
200219
- tweaks to zcache. still don't know if it's better with it on or off..
- tuned hotplugger will enable a core and put it on maximum freq right away!
- removed CPUBW_HWMON gpu governor
- tweaks to uv_oc table
220219
- compiling with march=armv7-a mtune=cortex-a15
070319
- linux 'fair' scheduler tuning
- zcache disabled
- more inlining while compiling
100319
- more tuning on linux cpu fair scheduler and tuned governor
- revised all kernel configs (klte and variants)
260319
- smooth screen animations
- new f2fs version
- maple scheduler tuned
- compiled with -funroll-loops but less function inlining
030419
- f2fs should be working now
- new assembly optimizations
150519
- boeffla app should work better now when changing cpu hotpluggers and charging voltages
- some governors are back
- using "system_freezable_power_efficient_wq" for disk events
- RoW and Maple schedulers tweaked
- ext4 tweaks
- fair scheduler tweaks
070619
- GCC 9.1 (2019 compiler and toolchains)
- Compiling with -fgraphite -fgraphite-identity -fschedule-fusion -ftree-lrs
- tuned hotplugger with different algorithm
110619
- number of online cores are now working on boeffla app
- boeffla app can raise input charger amperage to 2200
- minor gpu tweaks
200719
- Tuned governor and hotplugger tweaked
- Saving more battery when suspended
- Merging sd reads/writes by default
090819
- tuned governor tweaked
- defaulting to row i/o scheduler, even though benchmarks don't like it
- defaulting to "simple_ondemand" gpu governor, tweaked it a lot
100919
- back to xz compressed kernel image
- updates from upstream los16
- same kernel for los14 or 16. thanx Samuel Pascua
- some strncpys changed to memcpys
- tuned governor at 15ms frequency
221019
- updates from upstream los16
- rewrote tuned hotplugger: using even less cpu for itself but enabling cores more often, starting from core 4 instead of 2
- ZRAM enabled with lz4 compression but swappiness at 60% only
- made 1497mhz the default high load speed
- tuned governor at 10ms frequency
101119
- zram changed to vnswap but lower swappiness to save battery
- no more flicker when low brightness (thanks to samuel pascua)
- file system tweaks
201119
- f2fs code stolen from intelli-kernel
- file system tweaks
- default vm_swappiness to 25
170120
- GCC 9.2.1 MUSL 2019-12
- boot time reduced even more
- faster overall performance, lower overall battery drainage
- KTmonitor should show CPU Temperature now
- vnswap should work on Pie
- enforcing selinux after booting
- removed adreno input booster
- set sysctl_vfs_cache_pressure to 50 and vm_swappiness to 40
- ignoring zswap_max_pool_pages
040220
- Working on Q (Android 10)
- AnyKernel update to 3
- Tuned governor with min_sample_time defaulting to 80ms
- Charging till your battery gives 4.4v, or explodes
- UV/OV table matching scaling_frequencies
20200223
- Using higher l2-cache frequencies for performance
- Higher heat "tolerance"
- Battery voltage/power should now be showing correctly at lockscreen
- vnswap wasn't working on Pie but now it is
20200521
- Changed some timers to let the device sleep more (huge battery gain on stand by)
- Tuned governor now being more conservative
- Added back IO Schedulers
- Led control
- LOS updates
- Remove Adreno touch booster
thank you for great work
Thank you very much.
why a new thread?! and also the download link is missing.^^
Where's the download link, appears to be missing.
xda is completely ****ed up
Thanks a lot for your work! But where do I get this kernel?
I've just upload a new version for klte only for now. TEST with los15.1 and 16 please.. and see if boeffla config app is still working with it..
and please don't flood this thread about the variants
fbs said:
I've just upload a new version for klte only for now. TEST with los15.1 and 16 please.. and see if boeffla config app is still working with it..
and please don't flood this thread about the variants
Click to expand...
Click to collapse
thnx for this kernel ,can't download this kernel
warism100 said:
thnx for this kernel ,can't download this kernel
Click to expand...
Click to collapse
I couldn't download using XDA app, but I was able too by opening XDA desktop site using browser.
I hope this helps you.
Thank you I will try it.
g900w8 9.0 no working
I have installed this kernel for my S5 G900F
with latest lineageos 15.1 and i insttaled beoffla
apk too, the results is great , beoffla apps work
as before
LOS15.1 + kernel + beoffla apk work fine
vlad3647 said:
g900w8 9.0 no working
Click to expand...
Click to collapse
w8 isn't klte
Uff i didnt know ,could you please tell which is w8?
Thanks
vlad3647 said:
Uff i didnt know ,could you please tell which is w8?
Thanks
Click to expand...
Click to collapse
hum.. you were right, it is klte indeed.. did it work with previous tuned-klte version ?!
I used before smartpack
---------- Post added 30-01-2019 at 12:03 AM ---------- Previous post was 29-01-2019 at 11:59 PM ----------
Maybe bcx muy phone is pretty old
---------- Post added at 12:36 AM ---------- Previous post was at 12:03 AM ----------
I install this one and so far so good
Kernel Special Features: lighter, optimization-focused
Version Information
Status: Stable
Stable Release Date: 2018-08-22
Hi, fbs.
g900f (klte) on los 15.1
not worked on f2fs