Related
I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.
lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine
The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.
just wanted to see if you had any luck with the changeout.
Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.
cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out
has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika
I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.
thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika
Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?
Hi guys,
So my mum dropped the Optimus Black that I bought her and it has cracked on the front - can someone on here please tell me how I would check whether it is only the front glass screen that needs replaced or the actual entire LCD? I'm very n00bish when it comes to this stuff.
Thanks all
Ok, I'm pretttty sure it's only the outer glass screen that's shattered and the actual LCD is fine.
Ordered a replacement part online, will update you all on how difficult it is to replace .
can you tell me where you ordered it ? I'm looking that too
Damn that sucks
Sent from my PG06100 using XDA Premium App
if the screen is still running, I am pretty sure it is just the upper layer of the LCD screen.
Ilko said:
can you tell me where you ordered it ? I'm looking that too
Click to expand...
Click to collapse
There's pretty much offers on eBay.
yeah but, china products...
Try dhgate
Boubt u can buy only 1
Isn't the screen gorilla glass? Does it crack so easily?
Sent from my LG-P970 using XDA App
Cracked screen
Hello guys
Well my sister just got an P970 and it cracked..I dont know why bcoz I had that phone for couple of months and its not too heavy and it fell and never broke...but anyways
the digitizer (front glass) screen cracked..and I ordered ny from china..and I dissasembled the phone but up to a limit..I cannot dissasemble the LCD screen from the digitizer screen..no way..it seems to be glued or sumtin..
Does ANYONE know how? I have searched the web but there is NO info
yuggoboy said:
Hello guys
Well my sister just got an P970 and it cracked..I dont know why bcoz I had that phone for couple of months and its not too heavy and it fell and never broke...but anyways
the digitizer (front glass) screen cracked..and I ordered ny from china..and I dissasembled the phone but up to a limit..I cannot dissasemble the LCD screen from the digitizer screen..no way..it seems to be glued or sumtin..
Does ANYONE know how? I have searched the web but there is NO info
Click to expand...
Click to collapse
I changed the digitizer of my previous phone, the Galaxy Spica, and the digitizer was glued to the outer rim of the LCD so i had to use force to get them apart.
Br,
zaitz
My friend's p990 also had a scratch on his screen
seems this gorrilla is just a chimp
Pretty sure it's not "titanium glass", just hardened glass, so don't expect it to be invulnerable. Get a screen protector, don't put your phone in with keys, coins, or anything else with sharp edges, and don't drop your phone this should keep it nice and shiny for a long time.
I once cracked my screen of Desire HD... Before buying anything, be 100% sure whether the top glass is mounted onto the LCD below; or glued to it with some sort of special chemical.
When I broke my DHD screen; I bought only the upper glass part from Ebay. But turned it, the top glass part was glued to the LCD. So I had to buy the LCD and glass part together...
masterthor said:
Pretty sure it's not "titanium glass", just hardened glass, so don't expect it to be invulnerable. Get a screen protector, don't put your phone in with keys, coins, or anything else with sharp edges, and don't drop your phone this should keep it nice and shiny for a long time.
Click to expand...
Click to collapse
but the "advertisement" on u-thub says differently
does anyone has a how to for dissasembling the phone?
the screen is scratch resistant. personally tried and tested using a sharp knife. i still use a screen protector, though, because we can never tell! i guess gorilla glass is still glass. it's just scratch and impact resistant, as seen on youtube.
This happened to me too the other day. The phone slipped out of my hand and onto a rather soft vinyl floor. Screen is now cracked all over, but working.
As it seems no-one here has been able to replace the screen themselves with ebay replacement glass (probably plastic anyway), I'll just throw my OB in the trash, and gladly so, because of LG's broken promises to update the phone. Thinking back, I might even have had a smirk on my face when I realized what had happened. At least now I have an excuse to get the Galaxy Nexus or some other phone from a decent, self-respecting company, and finally be at peace with the phone I own. With the OB I could feel a bit of frustration every time I used it. Frustration (or pity really) is something I also felt when I checked this forum, since the mods kept closing all the GB-related threads for no apparent reason other than to demonstrate their power.
Without LG, life will indeed be good
"the screen is scratch resistant" - well i made a scratch by simply cleaning the screen with some textil made for cleaning glasses
Noblim said:
Isn't the screen gorilla glass? Does it crack so easily?
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
P970 screen is Gorilla Glass. But I'm not sure about the replacement one from eBay.
My son dropped my n1 and I heard that nasty sound...
Started as a small crack in top corner with a white strip extending down the side of the screen. Other cracks are visible and the screen got progressively purple around the cracks and is now almost dark. I cannot feel any cracks and the touchscreen works fine.
I don't want to take it apart before ordering the parts since it is still usable. Any way to tell which part is cracked? I've read the digitizer is plastic?
Thanks in advance for any insights.
Mine cracked a while ago, 18 months probably. I've never had any problem with the screen. If touch still works, just ignore it.
The digitizer is the screen and touch electronics built into one part. If you have a crack, you'd need to replace the digitizer (which again, is the screen).
Keep in mind it would take hours to replace. You also run the risk of other things not working correctly once you put everything back together. I've replaced the digitizer in an original Droid. Everything went [relatively] well. But it took several hours, and certain [fancy] stickers were not able to be replaced. Meaning, it looked like it had been disassembled.
You broke the amoled underneath the digitizer I'm sure of it. I know because I did the same thing last year (13 months ago actually) and I could see a small crack in the amoled (digitizer was still intact) the screen went purple then blue the next day then went totally black within a week. Although it might have been a worse crack on mine.
BTW: the digitizer on the nexus one is not plastic it's gorilla glass.
touchscreen works fine? then its probably not the digitizer
the crack itself might be the digitizer rather than the display but the way youre describing it, the ink of the screen is running? well, tough luck..
it might just be better to buy a new phone (or a cheap used n1)
grimey01 said:
touchscreen works fine? then its probably not the digitizer
Click to expand...
Click to collapse
Actually you can crack the digitizer (spiderwebs and all) and it will still work like new the only thing is you will be looking around the cracks to see the picture.
The N1 does not have gorilla glass, but it does have a hardended glass (gorilla is just a brand name for a type of treated glass).
And if you are getting discoloring, it is definitely the AMOLED or SLCD screen (depending on your phone). The digitizer is the actual touchscreen part. It can still function with the cracks, but you can usually feel that they are there. Both are replaceable, although, it isn't the easiest thing to do. I know HTC will replace the AMOLED screen for around $110 and they offer the advanced exchange program with it. I would assume similar prices for the digitizer (although, the definitely isn't your problem, unless both are cracked).
So after about 4 weeks of this glorious phone, I've managed to crack my digitizer. I was working on my car (lying on my back under the car) and the phone slipped out of my pocket and onto the concrete. Maybe a 6 inch drop at best and got a nice long diagonal crack.
Anyway, I'm going to cut my losses and get a new digitizer. I have the AT&T model... but figured this section gets more responses. The digitizer should be the same right? Would this work: http://www.ebay.com/itm/New-OEM-HTC...e_Replacement_Parts_Tools&hash=item19dcd8fae5
Any idea how to pop off the digitizer and put the new one on? Out of my 20+ smartphones I've gone through, this is the first time I've ever cracked the glass
r34p3rex said:
So after about 4 weeks of this glorious phone, I've managed to crack my digitizer. I was working on my car (lying on my back under the car) and the phone slipped out of my pocket and onto the concrete. Maybe a 6 inch drop at best and got a nice long diagonal crack.
Anyway, I'm going to cut my losses and get a new digitizer. I have the AT&T model... but figured this section gets more responses. The digitizer should be the same right? Would this work: http://www.ebay.com/itm/New-OEM-HTC...e_Replacement_Parts_Tools&hash=item19dcd8fae5
Any idea how to pop off the digitizer and put the new one on? Out of my 20+ smartphones I've gone through, this is the first time I've ever cracked the glass
Click to expand...
Click to collapse
Changing digitizer / glass on the HTC One is similar to iPhone 3GS...
use a heatgun (hair blower) to heat up the glass and pry it away using a plastic tool of some sort... be careful around the edges not to damage electronics under it.
the glass you've found should work fine . there is currently only one revision of the glass part..
one problem though would be adhesive to glue on the new glass.
Yah I'm just worried about what adhesive to use to stick on the new glass. Don't want something that will fall off after daily use.. nor do I want something that can't be removed in case I crack it... again.
Hi everyone,
I have a relative with a TAB S2 9.7 that has a cracked screen. The user is quite disappointed with it since it wasn't dropped. She can't recall even hitting it against anything and wonders how it could have happened. The curious part is that she says the screen looked normal, but cracked when she put one of those pens with a soft rubber tip on it (she usually uses those to keep the screen free from smudges)
The screen has some spiderweb cracks centered in a point, so my theory is that perhaps she had it in a bag or something and pressure from a pointy item damaged it, slowly cracking util the light pressure from the pen made it obvious. It's always in a sleeve, but it's a fairly soft sleeve so maybe that was the case. The other possibility would me some sort of manufacturing defect making it crack, but I haven't heard of that before.
This is a person who doesn't have much money and tool really good care of the Tab, I've seen her handle the thing as if it was a precious item given the effort it took to buy it so I feel really bad about it. It's that look of disappointment of the kid who just dropped his icecream ball and cannot afford another.
The OLED panel seems to work perfectly, touch sensitivity is normal, etc. Seems to be just the thin top glass layer. I found the part for around 22 Eur, but installing seems complex. I'm sure I can't pull it off.
Anyone has any suggestions on how to have it fixed? Also, on how it could have happened without drops or obvious impacts? I was thinking about getting an S2 for myself now that prices are finally going down, but If I can't figure it out, perhaps I'll offer her a new one when I can... sigh...
Thanks
I'd just send it for repair especially if it still has warranty.
Even if it's not under warranty it may not be as expensive as you would think to repair.
Very little chance of repairing this successfully yourself unless you buy the whole lcd/touchscreen as a unit which would probably cost as much as getting it repaired.
ashyx said:
I'd just send it for repair especially if it still has warranty.
Even if it's not under warranty it may not be as expensive as you would think to repair.
Very little chance of repairing this successfully yourself unless you by the whole lcd/touchscreen as a unit which would probably cost as much as getting it repaired.
Click to expand...
Click to collapse
In fact, you have to have a special "heat box" to soften the glue just to get the back off. That's why the first thing I did with mine was to get a GOOD screen protector. One costing over $20. NOT a cheap "film" protector. Depending upon how bad the glass is cracked, putting a good screen protector on even now, to keep the cracks from spreading, might make the tablet serviceable.
I've changed the glass digitizer on several tablet but wouldn't even attempt to on an S2.
lewmur said:
Depending upon how bad the glass is cracked, putting a good screen protector on even now, to keep the cracks from spreading, might make the tablet serviceable.
I've changed the glass digitizer on several tablet but wouldn't even attempt to on an S2.
Click to expand...
Click to collapse
Agreed, if it's still usable put a screen protector on it.
It's what I did for my 3 year Olds tablet which he has a habit of testing newton's law of gravity with.
Definitely go for repair. My S2 screen cracked when it was propped up by its case and fell back onto the kitchen worktop, so not even dropped. I suspect it wasn't their fault at all and a screen protector would have done nothing whatsoever to prevent it.