When I tried to switch LTE to 3G
Settings>Sim cards>Settings>preferred network type>3G
data always turn on/off and then Settings is stop working
Also did a clean flash.
Does anyone have an issue and how to fix it?
Thanks
Related
Hi Guys
well did a search and couldn't find a topic about this, however if there is Sorry.
Anyways got my 02-Uk simplicity yesterday and set 3g and MMS up all fine, and was working fine, however today I came to work which is a bit out in the sticks so hard to get a 3g signal, and because of this i noticed I lost all signal.
after playing around I noticed that switiching it to "2g networks" i managed to get a full edge connection. My question is how come if it loses the 3g connection does it not revert back to a 2g network? I know there is a 2g connection beacuse if i do it manually it works. is there a way to do it automaticly?
also i do have data roaming connection active, and can post my APN details if anyone thinks that will help reslove the issue.
Thanks
matt
Brought mine in to t-mobile to ask the same question. they said just stick to 2g only when you're not in a known 3g area. They also recommended just turning data roaming off
I have the same problem with my Goophone Y6.
2 solutions I know:
1) Flightmode on/off
2) Reboot
This is very anoying, because the bug apperas again. One question: Do you lose signal when you turn your display off or after approximately 5 minutes?
Hi Guys, I changed my ROM to Froyobread v23b (thanks doixanh!) I noticed that the 3G or H icon is not showing even when I set to "Data enabled"
Does it mean data is not enabled or is it just the icon that is missing..
Any ideas?
Thanks!
Edit: I tried a full wipe already, same thing
I think it is your data that is not enabled. It has happened to my father. The operator network informed him that internet via data was enabled but when he turned on data, the icon was not appearing. The other day they informed him that internet via data was still not enabled and as soon as the operator network enabled it, the icon appeared. So check this...
Thanks Chris!
I checked my network operator and they told me that it is automatically enable after installing the settings they sent me.
I already installed what they sent but apparently it's still not working..
Any other suggestions?
Maybe your phone is using 2G/3G options in networks, which means it automatically selects the network, but in fact I get issue with this, I usually set is manually. Try see this, maybe your phone is trying 2G signal and is not getting answer from provider. You can set a widget to choose between 2G and 3G networks
Anyone have issues with 3g data not working while roaming? As soon as I would lose 4g and 3g would come up I'd lose my data connection. Chrome would say no Internet available yet my phone had 3g. Mobile data is on and I also checked the network types and it was set to global. Tried the LTE/CDMA setting as well with no luck. Really don't want to reset the phone. I cannot figure out how to disable 4g at my house to try and mess with it on 3g. I'm rooted. Thanks.
HI all,
On february 16 my provider network SFR (French in Paris) had some issues, I lost my gsm and 4G and since I can't turn on 4G and Wi-Fi on my HTC at the same time as I used to do before, now the 4G icon disappear when the Wi-Fi is turned on and I can read " Use my data plan when Wi-Fi isn't available" instead of "connected".
It seems that the 4G is in sleep mode, the icon comes again and data "connected" if I receive or send a MMS then disappear again.
If the wi-fi is turned off, I have the data "connected" with the 4G icon, as usual.
I have reset the SFR apn, still same, I have contacted their support, they say that it's normal for a smartphone to use Wi-Fi and not 4G all together, but I did when i wanted !
Now I can't, is any of u had this problem, know the cause and how to solve it?
Thank u in advance.
Do you have an option of automitically connect to 4G when wi-fi is poor turned on? It is in wi-fi's advanced options
Nexus 6 running Cataclysm 1/4/16 Stable. But I have this behavior on any ROM I try.
Often, when exiting range of a Wi-Fi area (leaving work for example), the LTE antennas do not come online. I see full cellular signal strength, but no LTE icon (or data icon of any kind). I lose cellular data access.
A workaround I have found is to, when i notice it, put the phone into airplane mode and back again. The LTE Icon shows after the cell connects and everything continues normally.
This is super annoying, I have tried several Kernels and ROMs to see if its a software problem but no luck. Any thoughts?
Desjani said:
Nexus 6 running Cataclysm 1/4/16 Stable. But I have this behavior on any ROM I try.
Often, when exiting range of a Wi-Fi area (leaving work for example), the LTE antennas do not come online. I see full cellular signal strength, but no LTE icon (or data icon of any kind). I lose cellular data access.
A workaround I have found is to, when i notice it, put the phone into airplane mode and back again. The LTE Icon shows after the cell connects and everything continues normally.
This is super annoying, I have tried several Kernels and ROMs to see if its a software problem but no luck. Any thoughts?
Click to expand...
Click to collapse
Go to developer options:
-Check: Cellular data always active
-ChecK: Aggressive Wi-fi to cellular handover
I toggled both options. Took me awhile to figure out why my signal was always being cut while on wifi
mikeprius said:
Go to developer options:
-Check: Cellular data always active
-ChecK: Aggressive Wi-fi to cellular handover
I toggled both options. Took me awhile to figure out why my signal was always being cut while on wifi
Click to expand...
Click to collapse
Thanks, I did that, will test later on when I leave work.
mikeprius said:
Go to developer options:
-Check: Cellular data always active
-ChecK: Aggressive Wi-fi to cellular handover
I toggled both options. Took me awhile to figure out why my signal was always being cut while on wifi
Click to expand...
Click to collapse
Works great! thanks a lot!
Wonderful, tyvm for this fix.
Sent from my Nexus 6 using XDA Labs