Whenever I start up my LG Optimus D415 it shows the LG logo, then goes to the Tmobile screen and freezes there. It stays there forever until I pull out the battery or it dies.
I can't seem to find a way around this. Is there a fix? If not, does anyone have the stock OS that I can flash onto this device?
Thanks!!
I am new at this so I may need some help doing this Thanks a lot!!
PS. First Post!!
Turn off your device. Hold Power button + volume down, when see LG logo, release those buttons quickly and hold it again. You will see dialog to factory reset device, navigate to YES with volume key and confirm with power button.
Vule991 said:
Turn off your device. Hold Power button + volume down, when see LG logo, release those buttons quickly and hold it again. You will see dialog to factory reset device, navigate to YES with volume key and confirm with power button.
Click to expand...
Click to collapse
Thanks! I did that and it seemed to reset like it should, but after that it froze at the same screen!
Related
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me
Hi, my screen is stuck on a grey screen and there is absolutely nothing I can do to get out of this grey screen. Yes, my screen still works is not damaged. I want to try turning off and on or restarting my phone to see if I can get rid of this grey screen, but I am not able to by the normal way. When I press the power button, the power off options do not appear, its probably masked under the grey screen, which I cannot touch through. I have tried pressing and holding the power button, but nothing happens. I am not able to remove the battery and put it back in because the Atrix HD's battery is nonremovable.
How do I manually restart my Atrix HD?
themare said:
Hi, my screen is stuck on a grey screen and there is absolutely nothing I can do to get out of this grey screen. Yes, my screen still works is not damaged. I want to try turning off and on or restarting my phone to see if I can get rid of this grey screen, but I am not able to by the normal way. When I press the power button, the power off options do not appear, its probably masked under the grey screen, which I cannot touch through. I have tried pressing and holding the power button, but nothing happens. I am not able to remove the battery and put it back in because the Atrix HD's battery is nonremovable.
How do I manually restart my Atrix HD?
Click to expand...
Click to collapse
Keep holding the power and volume down key.
Hold the power and up volume keys until it restarts. Holding the power and down volume keys triggers the screenshot feature.
Worked!
Dark9781 said:
Hold the power and up volume keys until it restarts. Holding the power and down volume keys triggers the screenshot feature.
Click to expand...
Click to collapse
I had the exact problem described above- Grey screen. Tried restarting as stated - power button + volume up key. Phone restarted and the grey screen issue is resolved. Thanks.
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
EveryDayDavid said:
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
Click to expand...
Click to collapse
The buttons are supposed to flash when you hold down the power button. After the buttons stop flashing, quickly release and then hold the power + vol down buttons. That should work unless something really got messed up.
adb
EveryDayDavid said:
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
Click to expand...
Click to collapse
ADB isn't working?
My LG G2 downloaded an update last night and I accepted the install. I woke up to a blank screen and i Can't do anything on it. No download mode or recovery. It was rooted before hand. VS980 Please someone help me. I see the lg screen for a few seconds then it goes all blank. If its plugged into the computer the LG screen only comes up for a split second.
Charge it for a few hours and go from there. Sounds like the battery is dead.
If you hold the power button does it continually vibrate in spurts? If so, then it's most likely just a dead battery.
Here's some more help for you.
Hold down power + volume down...the phone will turn off, but don't release them yet. It will flash LG logo for a split second and then turn off completely and stay off. You may release the buttons now.
Press and hold power + volume down. when you see the LG logo release the power button ONLY and then quickly press it and hold again until you boot into recovery.
Hit power twice to enter recovery
Click to expand...
Click to collapse
Holding volume up + plugging in your USB to the computer will get you to download mode as well and let you stock the phone.
jer_stud56 said:
Charge it for a few hours and go from there. Sounds like the battery is dead.
If you hold the power button does it continually vibrate in spurts? If so, then it's most likely just a dead battery.
Here's some more help for you.
Holding volume up + plugging in your USB to the computer will get you to download mode as well and let you stock the phone.
Click to expand...
Click to collapse
Its definitely not dead. The screen stays on, but black.I can get into that one hardware mode if i press down all three buttons.