So People While Having A Non-Nexus Device(Actually a Motorola One) I Wanted To Try a the Latest Version Of Nougat On My Phone Right Of The Bat So With A Bit Of Googling And Xdaing(Searching In XDA????) I Found The Way To Make Your Phone Look Like Android 7.0.
This Tutorial Just Customizes Your Phone From A Cosmetic Point Of View. Nothing Is Changed Internally!
So The Requirements Are :
1. An android Phone
2.Root Access
3.Xposed
4.Android N-ify
5.Nexus Launcher
6.Nougat Navigation Bar Module
7.Custom Recovery(optional)
And That's It!
Procedure: So The Thing Is Pretty Much Explanatory So Here It Goes :
Assuming You Got An Android Phone Having Root Access And Exposed Installed,
Go In the Downloads Section Of the Xposed App,
Type "Android N-ify" Then Download It From There,Install It,Activate It(But Don't Reboot). Now Download "Nougat Navigation",Install It,Activate It And Now Reboot.
Now For The The Leaked Version Of The "Nexus" (Yeah Nexus) Launcher :-
1.Assuming That You Have a Custom Recovery,Just Flash The Zip Provided.
2.If You Don't Have Any Custom Recovery Then Unzip The Zip,Copy The App Into /System/app and CHmod It To 644 .
But The Problem Is That Those Thirsty For The Swipe Left To "Google Now" Won't Get this Feature The Method 2.
Have Fun With The Nexus Feel Of Nougat!
Episode 2 Coming!
Hi all this is just an information. Today I'm going to present you Samsung's Bixby for J7 series which running on Nougaut in Samsung Based Custom ROM or Official ROM.
This is a simple step procedure.:fingers-crossed:
(Sorry I didn't tested on MM and LP, you can test if your device is MM/LP, because this won't do any harm to your device)
INSTALLATION PROCEDURE
1. Install these 3 as normal APKs.(Link in Download section)
(DON'T WORRY YOU CAN'T DIRECTLY OPEN IT FOR NOW)
2. Install Shortcutmaker app from Playstore
(Link is in Download section)
3. Open it and tap on Bixby Home app>Bixby Home option.
(PFA down)
4. Tap on try option.
5. Then allow all the permissions that it needs.
6. After that just restart your phone, and voila.
7. Just swipe left from Homescreen. You're done.
DOWNLOADS
1. Bixby APKs.
https://drive.google.com/file/d/1g2rZbtyGnESFV4lpf7XHB9roLjrErDKk/view?usp=drivesdk
2. Shortcutmaker App.
https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut
Very big thanks to me for sharing this to you.
I hope this is helpful and clear to you. If you have any confusion regarding installation please write down in comments section. Please don't tag the whole post. Just comment that's enough.
I m using bixby, not doing anything with shortcut makers or others, when i swipe left in homescreen it will open
sourav143 said:
I m using bixby, not doing anything with shortcut makers or others, when i swipe left in homescreen it will open
Click to expand...
Click to collapse
Ok fine. It will also work. I just did it in another way. That's it.
my device strucked in boot loop after installing bixby on genisys custom rom
pruthvi.g.gtl said:
my device strucked in boot loop after installing bixby on genisys custom rom
Click to expand...
Click to collapse
How the hell brother. Since you are not playing with system files. It just apps.
no Bixby Voice?
Can't Launch Bixby, it won't update, so it quits.
How to turn on the voice?
The link for at least the bixby apks are broken.
So, I needed to use my old phone again because my new one went back to the shop for repairs. I spent hours trying to get the LG Optimus 2X to work again. In the current year (tm) there are multiple problems:
Nvidia's Tegra 2 chip, which powers the LG Optimus 2X (P990) smartphone doesn't support NEON code (per Wikipedia: "Tegra 2's Cortex A9 implementation does not include ARM's SIMD extension, NEON.")
During 2017, Google added NEON code to Google Play Services - a background process which is automatically updated when the Google Play Store is active. There are hundreds of complaints about this in the Google Product Forums: https://productforums.google.com/forum/#!topic/play/uX3Xqk2gi_k and going by that thread, https://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-11-0-38-release/ is the last good version.
I don't know why, but somehow this is related to massive lag when using Optimus 2X roms like the LG stock ICS rom, and custom roms like TonyP's: https://forum.xda-developers.com/showthread.php?t=2769730 (I tried both kernels). Also the AOSP keyboard started malfunctioning (closing repeatedly when typing).
According to TonyP there is no (theoretical?) reason why NEON code should cause lag (only crashes), see bulletpoint 4 at https://forum.xda-developers.com/showpost.php?p=57920187&postcount=21 - but in practice it does.
Maybe it's related to the fact that Google Play Services now uses 121 MB as opposed to the 4,26 MB of the NEON-less version?
LG Mobile Support servers are down. This means that going back to stock and getting stock LG basebands and firmware is now much harder than it needs to be.
Because this phone is so old, a lot of links in this XDA Developers forum are dead. This includes all links to Gooserver, TonyP's server etc. This is why I will include a mirror for everything.
So after multiple hours of trial and error, here's what worked for me to get basic functionality without lag from this phone again.
Prerequisites:
1. You probably already have them installed, but install the latest LG USB drivers for the phone: https://www.lg.com/uk/support/support-mobile/lg-LGP990
2. Make sure you are on the V30A baseband (that is the latest version for Europe). You are probably on this baseband, but if not you can get it at http://www.handy-faq.de/forum/lg-op...al-firmware-der-provider-t207099/#post1469732 (the thread in XDA Developers forums only has dead links) (you only need LGP990AT-00-V30a-EUR-XXX-NOV-30-2012+0_CP.fls, which I've uploaded for you at Mega.nz). You can flash it using the instructions at step 5 below, using option 7 in the AIO-Toolkit.
Step 1: Get the last Cyanogenmod nightly (filename: cm-10.1-20140216-NIGHTLY-p990.zip) from the Archive.org torrent: https://archive.org/details/cmarchive_nighlies
Mirror: Direct magnet link / Mirror 2: Mega.nz.
Please be aware that Cyanogenmod uses the "old partition loadout" / "old bootloader". This will be relevant later.
Step 2: Get the Non-neon Gapps for Android 4.2 by TonyP, the version that changes the keyboard to a non-neon version, by Luk_Optimus (filename: gapps-jb-20130427-nonneon-tonyp-keyboard.zip). You can download it at https://forum.xda-developers.com/showpost.php?p=42567546&postcount=15 . Mirror: Mega.nz
Step 3: Get the at All-In-One ToolKit v6.0 at https://forum.xda-developers.com/showthread.php?t=2020737 . Mirror: Mega.nz
Step 4: Reboot Windows 10 using the startup option "Disable Driver Signature Enforcement", I used method 2 from https://www.lifewire.com/how-to-access-advanced-startup-options-in-windows-10-or-8-2626229 to show the Advanced Startup Options.
Step 5: Open AIO-Toolkit using the desktop shortcut, and after installing the NVFlash Recovery Drivers (option i), type in option 4 ( 4 - Repartition your device with preferred layout and bootloader ). Follow the instructions. Pick the options for the Old Bootloader and TWRP 2.6.0.0. instead of Clockworkmod. Allow AIO-Toolkit to fix the partition layout (it will ask you if you want to do this at the end).
Step 6: Boot to TWRP recovery. Insert the SDHC card containing Cyanogenmod and Non-Neon Gapps. Use the Install button. Flash both the Cyanogenmod and the Non-Neon Gapps you downloaded above.
Step 7: Boot the LG Optimus 2X. Enjoy. Don't forget to dismiss all dialogs asking you to "upgrade" your version of Google Play Services. For example when installing Whatsapp.
Remaining issues:
EDIT: Google Play Store will still sometimes try to update Google Play Services to version 12.8.74 without your consent. In that case, go to Settings -> Apps -> Downloaded and use the "Remove Updates" button on both Google Play Store and Google Play Services. This will return you to the working Non-Neon Gapps version you installed above.
WhatsApp requires Google Play Services to restore backups. Other applications will just not work: for example, MediaMonkey requires Google Play Services 12.4.51 or later, Tapatalk requires it too. Also, some apps are not compatible with non-Neon devices in their latest versions. I've noticed Firefox, Opera Mini (and its beta), Chrome (and its beta) don't work. So I'm still looking for a better browser than the built-in one.
Note: Sometimes the dev has published a Lite version that has less system requirements. For example: use Messenger Lite instead of Facebook Messenger. Messenger Lite, however, crashed when I tested voice calls. Whatsapp didn't, but the other party couldn't hear me.
Seems like some certificates / trusted Certificate Authorities may be missing, causing network errors when using the browser to visit HTTPS websites? All my other devices work fine on my WLAN.
If anyone needs additional instructions, please leave a reply If you have anything to add, also leave a reply!
I manage to make GMS worked natively with some limitations (push notifications using Google FCM and Map showing on some apps which can be solved by downloading those app from AppGallery).
I have been updated the file to Honor GMSv2.zip to most of file are Android 11 (API30) and recent working version possible. My phone run:
Magic UI 5.0.0.189 now (Mar 1 2022 security)
I uninstalled the system update to avoid update to UI 6.0
no possible solution yet for 6.0 for gms installation, Google will be removed on first reboot on 6.0
Credits to:
-Guide followed from https://club.hihonor.com/cn/thread-26315802-1-1.html
-Package Files gotten from EloYGomeZTv from Youtube
What differences for Honor phone, google play store will not update itself, google services and framework will not have uninstall button (but there're workaround to update it).
Click to expand...
Click to collapse
1 Download the Honor GMSv2.zip and unzip it to your preferred location
2 Copy "Huawei" folder prepared from Google Assistant Backup Folder to root directory of your phone
3 Turn off wifi and data, change date to 23/07/2020
4 Do normal restore operation. Open Settings->system->backup->restore the backup from internal storage (or using external drive-by keeping "Huawei" on root of the drive)
5 Open Google Service Assistant (G logo), click activate, and allow file permission
(must not click reinstall google button at the button)
6 Turn on wifi and/or data, change date to normal
7 Install 1-5 apps respectively
8 Go settings to Users & accounts=>add account=>Google (login your accounts)
***(0. MicroG-Huawei-FIX-ELOYGOMEZTV.apk will not be used unless you cannot add account successfully by those steps)
9 Install 6. com.google.android.gsf_11-30_minAPI30(nodpi)
10 Install 7. com.google.android.gms_17.8.57_(100400-256029040)
11 After that the notification keeps popping up, open the Google Play Store, go to store settings->disable auto-update apps
12 Go settings to App->Google Services Framework
->go storage and clear cache then clear data, force stop until gray out
13 Reboot, open Google Play Store, success!
You should update to Google Play Services 20.18.17_(140408-311416286)-201817057_minAPI30 after no error notification pop up (and do not update it!)
Click to expand...
Click to collapse
-Google Play Store, Google Play Services, and Google Framework can be updated using
For Update or Uninstall.zip (see note in it),and below:
+Google Play Services and Google Framework (open each folder)
1. install number one | 2. reboot | 3. uninstall | 4. install number two+Google Play Store
1. download 2 files of new vesion from apkmirror, one is bd32 (blue) and another is 3891 (purple, there're 3, can choose one)*bd32 signature is unsupported one. *3891 signature is support to use2. install bd32 (using split apk installer or apkmirror installer)3. reboot | 4. unisntall play store | 5. install 3891 | 6. turn off auto-app update in play store***in-case you see update notification, just cancel it, otherwise you need to reinstall play services again.
Click to expand...
Click to collapse
--------------------------------------------
Google Chrome will not show any account at first, what you need to do is going to App->Chrome->Permissions->allow Contact permission (if any just allow all)
You should allow all permissions on most of installed Google apk after installation.
--------------------------------------------
**Still error popping up
1. Normal error (not red text notifications), clear cache and data on Google Services Framework, force stop and reboot.
*if error remain, try it a few times
2. Red error (something with play protect is not certified...)
-Download Google Chrome from store, click update play service when open chrome, reboot
-Go to App->Google play service (see uninstall button), click uninstall
-Install 7. com.google.android.gms_17.8.57_(100400-256029040).apk, clear cache and data on Google Services Framework, force stop and reboot.
-After fix the error notification, you can update Google Play Services to 20.18.17_(140408)
*if error remain, try it a few times
3. If above method is not working, follow these steps:
-Turn off wifi and data
-Go settings to App-Google Play Store-click force stop store, go storage and clear cache then clear data
-Go settings to App-Google Services Framework- go storage and clear cache then clear data, repeat clear those for 3 times,
force stop until gray out
-Reboot device (no internet yet)
-Go settings to App-Google Play Services-clear cache, delete all data, then force stop until gray out
-Reboot, turn on wifi, go play store to check
*if error remain, try it a few times
Click to expand...
Click to collapse
To uninstall system update, use adb with cmd:
adb shell pm uninstall -k --user 0 com.hihonor.ouc
If you already on Magic UI 6.0 and want to downgrade to 5.0, you need 2 files
***For Magic3 Pro ELZ-AN10 --->>>
1. First patch to make system downgradable:
+[Before 6.0.0.122] ELZ-AN10 6.0.0.999(C00E999R4P5)_Firmware_Magic UI 6.0_05017LVR.zip2. Full package 5.0 for system downgrade:
ELZ-AN10 5.0.0.186(C00E183R6P1)_Firmware_Magic UI 5.0_05017KCH.zip
***For Magic3 Pro+ ELZ-AN20 --->>>
1. First patch to make system downgradable:
+[Before 6.0.0.122] ELZ-AN20 6.0.0.999(C00E999R4P5)_Firmware_Magic UI 6.0_05017LVS.zip+[6.0.0.125 Upward] ELZ-AN20 6.0.0.998(C00E999R4P8)_Firmware_Magic UI 6.0_05017MGV.zip2. Full package 5.0 for system downgrade:
ELZ-AN20 5.0.0.186(C00E183R6P1)_Firmware_Magic UI 5.0_05017KCH.zip
***For Magic3 ELZ-AN00 --->>> help yourself by downloading from THIS: Extraction code: p6pl
Flash those two packages subsequently using dload method
1. Unzip it, and Copy the [dload entire folder] to the root directory of the U disk(format to exFAT/NTFS and use a good speed drive)2. Update can be done by 2 methods:a. Input on dialer *#*#2846579#*#* -> software upgrade -> SD card upgrade -> OKb. By vol-up+power when power off/restart to enter recovery --> software upgrade -> SD card upgrade3. Wait patiently for it to flash from 0% to 100% (around 2-3 min at most)
Click to expand...
Click to collapse
Disclaimer -
I am not the creator of this method and the files are not owned/ do not belong to me.
Follow the step to install the service at your own risk.
This method works but with alot of limitations,..
After Magic UI 6 (BETA already installed) is not even allowing this method now.
mkharbandap said:
This method works but with alot of limitations,..
After Magic UI 6 (BETA already installed) is not even allowing this method now.
Click to expand...
Click to collapse
What kind of limitations do you refer for? I am using Magic ui 5 with google service almost perfect without any restrictions.
I don't get the ui 6 yet, but if you got struck because G app logo (the google assistance), you only need to reinstall old backup app before you restore it.
Chengrom said:
What kind of limitations do you refer for? I am using Magic ui 5 with google service almost perfect without any restrictions.
I don't get the ui 6 yet, but if you got struck because G app logo (the google assistance), you only need to reinstall old backup app before you restore it.
Click to expand...
Click to collapse
No google maps on other apps like Google Photos, Uber etc. Of course limitations on notification.
Magic UI 6 beta, couldn't install with GMS installed, hence needed to reset..
Now, after restorring from old backup, I get G logo but unable to open it
mkharbandap said:
No google maps on other apps like Google Photos, Uber etc. Of course limitations on notification.
Magic UI 6 beta, couldn't install with GMS installed, hence needed to reset..
Now, after restorring from old backup, I get G logo but unable to open it
Click to expand...
Click to collapse
What version of backup app do you have right now?
Chengrom said:
What version of backup app do you have right now?
Click to expand...
Click to collapse
10 or 11
mkharbandap said:
10 or 11
Click to expand...
Click to collapse
I tried both.. Restore from local storage.. Infact i tried to restore from HiHonor Suite too
mkharbandap said:
I tried both.. Restore from local storage.. Infact i tried to restore from HiHonor Suite too
Click to expand...
Click to collapse
It should have worked on old version of backup like Huawei. Be sure you have a change of date before restore (it is important step! )
The version of mine that worked is com.hihonor.koBackup-11.5.1.348-230501348.apk
If it is still not work out, It might be Honor phone updates to android 12 incompatible with the assistance app, you may downgrade to install it.
mkharbandap said:
I tried both.. Restore from local storage.. Infact i tried to restore from HiHonor Suite too
Click to expand...
Click to collapse
Give me your Telegram ID let me ping you
Chengrom said:
It should have worked on old version of backup like Huawei. Be sure you have a change of date before restore (it is important step! )
The version of mine that worked is com.hihonor.koBackup-11.5.1.348-230501348.apk
If it is still not work out, It might be Honor phone updates to android 12 incompatible with the assistance app, you may downgrade to install it.
Click to expand...
Click to collapse
I think it is not compatible with Android 12. HONOR suite doesn't allow to downgrade either. I tried to restore with 10, 11 version of backup apk including restoration from Honor suite too
mkharbandap said:
Give me your Telegram ID let me ping you
I think it is not compatible with Android 12. HONOR suite doesn't allow to downgrade either. I tried to restore with 10, 11 version of backup apk including restoration from Honor suite too
Click to expand...
Click to collapse
Have you also tried to uninstall and install backup.apk from adb as well? If so, I also out of ideas to make it work if could not downgrade it.
mkharbandap said:
Give me your Telegram ID let me ping you
I think it is not compatible with Android 12. HONOR suite doesn't allow to downgrade either. I tried to restore with 10, 11 version of backup apk including restoration from Honor suite too
Click to expand...
Click to collapse
I found a guide video that make sense for you as it skipped the google assistance app backup step completely from chinese guy who also using Honor phone to do it.
Here is the link: youtu.be/pSTk1wRe4EA (useless)
Chengrom said:
I found a guide video that make sense for you as it skipped the google assistance app backup step completely from chinese guy who also using Honor phone to do it.
Here is the link: youtu.be/pSTk1wRe4EA
Click to expand...
Click to collapse
Let me try this
mkharbandap said:
Let me try this
Click to expand...
Click to collapse
The thing with this and most of other method without G installation is, it doesn't retain the Google account after uninstalling MicroG, i can't see any google account even after adding via MicroG
mkharbandap said:
The thing with this and most of other method without G installation is, it doesn't retain the Google account after uninstalling MicroG, i can't see any google account even after adding via MicroG
Click to expand...
Click to collapse
You can share screenshot of G app error for future solution. You need to until stable release to see if there any methods shared that work on Magic UI 6.
Chengrom said:
You can share screenshot of G app error for future solution. You need to until stable release to see if there any methods shared that work on Magic UI 6.
Click to expand...
Click to collapse
yeah, i am waiting for some solution or installation method for GMS on Magic UI 6. Let's see if someone is coming up on this.
I am using previous method to install GMS. my only problem is I can't update GMS because its is a system app now, P50 doesnt have this problem. IS there any other workaround for those system apps thing. P50 works fine with no errors or notification and all Google files are uptodate. Honor Magic3 Pro freeze when google wants to update gms when installing gboard.
jattal said:
I am using previous method to install GMS. my only problem is I can't update GMS because its is a system app now, P50 doesnt have this problem. IS there any other workaround for those system apps thing. P50 works fine with no errors or notification and all Google files are uptodate. Honor Magic3 Pro freeze when google wants to update gms when installing gboard.
Click to expand...
Click to collapse
To clearify, the previous method is just extended and also needless for Honor magic 3 pro where it only need to clear data on Framework to fix the error.
First of all, to update google services, you should go to play store and turn off app auto-update from the settings first.
The steps to update or uninstall are here:
-update using unsupported version for Google services (android 11 version any packages)
-reboot, You will see uninstall button
-Install any packages you want
The files are attached below! the second packages is 20.30.65 that is work great, you can try other version on android 10 for GMS to work.
jattal said:
I am using previous method to install GMS. my only problem is I can't update GMS because its is a system app now, P50 doesnt have this problem. IS there any other workaround for those system apps thing. P50 works fine with no errors or notification and all Google files are uptodate. Honor Magic3 Pro freeze when google wants to update gms when installing gboard.
Click to expand...
Click to collapse
As you mention, P50 is based on Android 10, and Magic 3 pro is on Android 11.
You can try to update the Google Services Framework from 10 to 11 to make it work flawelessly, still, some limitation on Map and push.
The procedures are the same as updating Google Play Services.
Thank you. Very clear.
The method i used was to insert GSF to google account, which allowed me to update smoothly on P50.
hi,
I tried on my Honor Magic 3 Pro Plus (Ultimate) but I can't uninstall the Google Services Framework. My phone can't fix the Google Play Services error message: this device isn't Play Protect certified
I'm NOT a gapps user so I will NOT be participating in this thread. I'm not supporting or answering any gapps project questions.
This thread is for users who want/need to run gapps with 19.1 on exynos5433 devices like SM-T710 and SM-T810
I opened this thread as a courtesy for users who want/need gapps.
At last count there were 5 gapps projects and they are in various states of "working" wrt to 19.1. It's your responsibility to put in some hours of research to find out what gapps works for you.
All I can say is that some testers report that NikGapps 12.1L arm64 core (May 1, 2022) work. Despite the arm64 name, that version WILL work on exynos5433. Your mileage may vary.
https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-SL/01-May-2022/
Reserved.
I can confirm that I have successfully installed NikGapps Core along with @retiredtab's T170 and T810 LOS19.1 ROMs. I have my complete set of Google Play Apps available to me on the tablet after installing them, including sensitive ones such as Peacock, Netflix, Disney+, etc. All Apps run normally, and when I check Google Play/Settings and scroll to the bottom, I see “Device is certified”.
I've tried to install BitGapps pico + Flamegapps basic (both ARM and ARM64 versions).
NikGapps64 finally worked.
pflyaz said:
I can confirm that I have successfully installed NikGapps Core along with @retiredtab's T170 and T810 LOS19.1 ROMs. I have my complete set of Google Play Apps available to me on the tablet after installing them, including sensitive ones such as Peacock, Netflix, Disney+, etc. All Apps run normally, and when I check Google Play/Settings and scroll to the bottom, I see “Device is certified”.
Click to expand...
Click to collapse
Installed the ROM on clean wipe on Galaxy Tab S2 T810. Then NikGapps Full thru Basic in different tries.
1. With NikGapps Full to Basic there is no onscreen keyboard that comes up to set up wifi or PIN. Only a Google Voice typing error shows up. How is this solved?
2. After set up without Wifi, the tablet says "Tablet starting....." and does not go further.
Any ideas welcome....
chappatti said:
Installed the ROM on clean wipe on Galaxy Tab S2 T810. Then NikGapps Full thru Basic in different tries.
1. With NikGapps Full to Basic there is no onscreen keyboard that comes up to set up wifi or PIN. .....
Click to expand...
Click to collapse
Did you "format data"?
That solved it on mine (with the 2nd flash) testing the prealpha build.
I took only core instead of basic.
I had this in my 19.1 msm8916 post #1, but forgot to add it to exynos5433 post #1. The following is now added to 19.1 T710 and T810 post #1. This would also apply to things like wifi password, etc, not just bluetooth pin.
keyboard bug workaround. When prompted to enter something like a Bluetooth pin, sometimes the keyboard is not shown on the screen or off screen. The workaround is to bring up the built in browser, touch the url panel where the http address is and then press the number key when the keyboard pops up. Leave this browser open like that, then press the home button and try your Bluetooth pairing again.
This keyboard bug is a LineageOS bug as per
https://review.lineageos.org/c/LineageOS/android_packages_inputmethods_LatinIME/+/325438
chappatti said:
Installed the ROM on clean wipe on Galaxy Tab S2 T810. Then NikGapps Full thru Basic in different tries.
1. With NikGapps Full to Basic there is no onscreen keyboard that comes up to set up wifi or PIN. Only a Google Voice typing error shows up. How is this solved?
2. After set up without Wifi, the tablet says "Tablet starting....." and does not go further.
Any ideas welcome....
Click to expand...
Click to collapse
I figured this out and everything runs good.
I used two files (one file in attachment). The zip file is flashed from TWRP. I also installed the Gboard apk from :
Gboard - the Google Keyboard 12.1.06.463429027-beta (arm-v7a) (nodpi) (Android 6.0+) APK Download by Google LLC - APKMirror
Gboard - the Google Keyboard 12.1.06.463429027-beta (arm-v7a) (nodpi) (Android 6.0+) APK Download by Google LLC - APKMirror Free and safe Android APK downloads
www.apkmirror.com
and apk was installed normally. Gboard gets installed and all is good. I think the apk alone should do it, but I did not try that alone. (For some reason attaching the apk file to this post fails). Once this is done and the Wifi is set up one can then download any other keyboard they want from app store.
Also, I don't recommend using NikGapps above "basic", on Tab S2 T810. A Gapp keeps crashing and the tablet is stuck on "Tablet starting.....".
I downloaded Basic NikGapps from here: https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-SL/09-Jul-2022/
retiredtab said:
I had this in my 19.1 msm8916 post #1, but forgot to add it to exynos5433 post #1. The following is now added to 19.1 T710 and T810 post #1. This would also apply to things like wifi password, etc, not just bluetooth pin.
keyboard bug workaround. When prompted to enter something like a Bluetooth pin, sometimes the keyboard is not shown on the screen or off screen. The workaround is to bring up the built in browser, touch the url panel where the http address is and then press the number key when the keyboard pops up. Leave this browser open like that, then press the home button and try your Bluetooth pairing again.
This keyboard bug is a LineageOS bug as per
https://review.lineageos.org/c/LineageOS/android_packages_inputmethods_LatinIME/+/325438
Click to expand...
Click to collapse
Please see my post above.
I struggled with Installing Gapps on the latest Nov 11, 2022 release.
Tried:
NikGapps NikGapps-core-arm64-12.1-20220908-signed.zip and NikGapps-basic-arm64-12.1-20220908-signed.zip - both installs without issues in TWRP but no Play store or any other apps in the system.
BiTGApps-arm64-12.1.0-v1.7_signed.zip - fails with error "unsupported platform"
BiTGApps-arm-12.1.0-v1.7_signed.zip - installed and Play Store is visible. Get it here https://bitgapps.github.io/download.html
Pawel_ said:
I struggled with Installing Gapps on the latest Nov 11, 2022 release.
Tried:
NikGapps NikGapps-core-arm64-12.1-20220908-signed.zip and NikGapps-basic-arm64-12.1-20220908-signed.zip - both installs without issues in TWRP but no Play store or any other apps in the system.
BiTGApps-arm64-12.1.0-v1.7_signed.zip - fails with error "unsupported platform"
BiTGApps-arm-12.1.0-v1.7_signed.zip - installed and Play Store is visible. Get it here https://bitgapps.github.io/download.html
Click to expand...
Click to collapse
I installed NikGapps-omni-arm64-12.1-20220709-signed.zip from twrp and it is working well. I have the play store.
I was surprised to see that it is an arm64 version even though ( I thought that) the t710 (exynos) has an arm32 processor.