Related
Tried reading a few posts & wiki, can't find satisfying answers.
I currently have unrooted Stock ICS (LPF), and wanting to root so that I can use 'AdFree' apps on my Note. Found dr. Ketan's guide which seems straightforward, but just want to check so that I don't do stupid things.
Q:
1. Is SuperSU and/or CF-Root needed to use AdFree? ie. without SuperSu & CF-Root, is the device actually have 'FULL' root?
2. What really is a partial root? why,how come some user get partial root and some don't?
3. In dr. Ketan's guide, Step 5: "Choose CWM.zip and wait until CWM recovery appear". Is this only installing CWM temporarily? I mean, the next time I enter recovery CWM will be gone?
4. What is the benefit of having CF-Root installed? heard so many issues with WiFi.
6. Other than extra features, what is realy benefit of installing SuperSU?
thanks for your help
Root permissions or root privileges are obtained by performing a process called routing and grant the user the ability to take advantage of specific parts of the operating system, in our case of Android, which would not otherwise be accessible.
Thanks to this process so we can use applications that leverage, more profoundly, the operating system and offer customizations and features in more than a telephone that does not have enabled the permissions of root.l 'unlock the bootloader and a particular procedure that allows you to unlock most of the systems, Android
With the ability to enable the root permissions, install custom reocvery, custom firmware and several hacks. Now this type of release and has been replaced with simpler procedures and innovative, because it causes the loss of the guarantee.
Superuser is an application that is usually included in mod ROM (for example CyanogenMod) is basically manages root permissions by opening a pop-up whenever a application request is made, in such a way as to decide if grants or less allowed to, and lists all the applications for which we have given access to root permissions.
The recovery of an Android phone is a particular feature that you can activate before the boot (i.e. , before the start) of the operating system and allows you to perform a number of specific operations, including: hard reset and firmware upgrade.
The original recovery or stock recovery is the one which is pre-installed on our Android phone at the time of purchase .To enable the root permissions you can simply follow the guides that you can find here ;http://forum.xda-developers.com/showthread.php?t=1329360
viluve said:
Tried reading a few posts & wiki, can't find satisfying answers.
3. In dr. Ketan's guide, Step 5: "Choose CWM.zip and wait until CWM recovery appear". Is this only installing CWM temporarily? I mean, the next time I enter recovery CWM will be gone?
yes after you boot up your phone cwm will be gone, just keep the file on your device and anytime you need to flash something via cwm youll first have to install it then do whatever it is you have to
Click to expand...
Click to collapse
Full vs Partial root
Any expert with accurate definitions ?
Let's start by saying that the root is not a "thing" as the jailbreak and not a task to perform. On linux platform is the root administrator user who has the highest privileges in the system (such as the Windows Administrator user to understand each other). The root then you do not get, but instead get its permissions. The root permissions allow you to do anything with your system. Limited only by your imagination. We can access the system files, delete them, edit them, replace them.(root explorer), Change the frequency of the processor , Back up applications (including system) even with their data. Or remove the applications already installed, on the device.(titanium backup), partialroot that is permitted without the recovery and icon superuser with root explorer can not to heave reading/writing in to system / app .
[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 8.0 [2012 MODEL] - Drivers, Root, Recovery + MORE
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports a multitude of Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
SUPPORTED MODELS
GT-N5100 3G/WIFI MODEL
GT-N5110 WIFI ONLY MODEL
GT-N5120 LTE MODEL
Click to expand...
Click to collapse
FUNCTIONS OF UNIFIED ANDROID TOOLKIT V1.3.3 [8TH DEC 2014]
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn't corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: As the exe files are not Digitally Signed with a Microsoft Certificate they 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR 'AUTO UPDATES' DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE 'QUICK PICKS' SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE "ANY BUILD" OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD (USEFUL IF YOUR BUILD IS NOT LISTED).
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
Enable Developer options for usb debugging
Go to Settings, System section, About device and tap on 'Build number' 7 times until it says you are now a developer. You can now go to Settings, System section, Developer options and enable USB debug.
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the device.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**FAQ**
Q. Help me I can't find my build in the Model Selection Screen
The Toolkit includes a selection of Insecure Boot Images to cover all the different builds available. As there are very many different builds it is impossible to include an image for every single build but some builds share the same Boot Image. If you have a build that isnt listed on the Model Selection Screen you can therefore use a similar build. The best way to go is up to the next available build as it should offer more compatibility with the build you are using but if that isn't available then try the next build below your one as it should still be almost identical as long as it is the same version (ie. 4.1.2).
The Model Selection Screen is there so that if a task in the ToolKit requires an insecure kernel [to perform adb root commands] and your phone doesnt already include one, a compatible boot image [with an insecure kernel included] can be flashed to provide adb root access.
If you have a Custom Rom flashed to your phone then it will most probably have an insecure kernel included so it doesn't really matter if your build is not listed on the Model Selection Screen and when asked [by certain functions] if you have an insecure kernel on your phone you can answer 'yes'. However if the function fails then your kernel may not be insecure in which case you can flash one from the ToolKit. If you need to do this make sure the right build [or closest available build] is set so you flash the right image for your phone.
----------------------------------------------------------------------------
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF like removing system apps.
----------------------------------------------------------------------------
Q. Why do I need to back up my IMEI/EFS and how do I do it?
There well protected section of your device that is virtually immune to any kind of flashing and manipulation (unless of course you know how to access it). This part of the device contains information such as IMEI (or MEID and ESN in the case of CDMA devices), programming parameters for the device such as your account information (phone number, etc), data provisioning parameters, and a whole bunch of other things that, when not handled properly, can render a device completely useless. All of these are contained in the infamous \EFS folder. If anything messes with your EFS folder, unlike flashing a device (which could potentially lead to bricks as well) it could render your device completely useless as it will no longer be recognized by your carrier. If you are not planning on flashing anything to your device and want to stay on pure Stock then you may never have any problems but it is still advisable to backup this information just in case (better to be safe than sorry).
This feature will be added to the Toolkit after testing has been completed.
----------------------------------------------------------------------------
Q. Does flashing a custom image increase my flash counter?
Any image that is flashed via Odin that has been modified will increase the flash counter that can be viewed in the Download Mode on your device (if booted by holding the Volume Down, Home and Power buttons). You can reset the flash counter using an app by Chainfire called Triangles Away and can find instructions on how to use that in the Downloads section in the Toolkit.
----------------------------------------------------------------------------
Q. Will flashing Stock ROM via odin using the toolkit replace everything that was flashed before? recovery? etc?
Yes a Stock Image flashed via Odin will replace all your key partitions (boot, recovery, system) with the stock firmware. If you want to reset the phone back to an 'out of the box' state then you want to enter recovery and do a wipe first which will reformat your userdata partition.
----------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and /system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
----------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may pick it up as potentially harmful when it is not. They will pick up ANY file that doesn't contain a purchased Microsoft certificate in the same way. Just Restore the deleted file and exclude it from further scans and it will be fine. Or switch to a better AntiVirus program such as BitDefender.
----------------------------------------------------------------------------
Q. I flashed the Toolkit Boot Image, now my wifi + bluetooth won't work
The boot images are made from Stock with only needed changes made to the insecure boot images [modified adbd, default.prop and rc.local edited] and will work on all stock roms. If you flash them to a custom rom and the rom has been altered or uses a custom boot image then it will boot but certain modules may not load such as wifi or bluetooth. In this case you can use the boot image to root or perform adb root functions but will need to flash back the boot image for the custom rom to get other functions working again. This is not a fault of the Toolkit but a difference to stock in the custom rom.
----------------------------------------------------------------------------
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera mode (P2P). To do this open the notification area, click where it says connected as and change from MTP to PTP.
----------------------------------------------------------------------------
Q. I want to send my device back for warranty purposes
1. Follow the instructions to reset your flash counter with TriangleAway.
2. Download and flash a Stock Firmware image from the download section.
3. Boot into Stock Recovery and perform a wipe/factory reset
.
Your internal storage will be formatted and data and cache wiped. Your device should now be back to an out-of-the-box FULLY STOCK state with the flash counter [shown if you boot to download mode manually] reset and ready to send back.
----------------------------------------------------------------------------
Q. When connecting the phone I get 'USB Device not Recognized' and no serial number shows in the ToolKit
I actually had this problem recently and what fixed it for me was to make sure that the drivers have been installed, then shut my phone down plug the usb cable in and restart it. The phone booted up and the device was recognized and drivers installed correctly. May not work for everyone but worth trying.
*reserved if needed*
Mskip
thanks for this
is your version of cwm working properly?
thanks
jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
I think that's for us us to test and tell him
sefrcoko said:
I think that's for us us to test and tell him
Click to expand...
Click to collapse
It's the same version as provided in the development thread.
i flashed the cwm
but cant do anything
cant even reboot
jocko6872 said:
Mskip
thanks for this
is your version of cwm working properly?
thanks
Click to expand...
Click to collapse
CWM is the experimental port from emwno in *THIS* thread.
I need people to test if the insecure boot image flashes and whether the root process works.
Mark.
madsatan said:
i flashed the cwm
but cant do anything
cant even reboot
Click to expand...
Click to collapse
Flashing custom recovery shouldnt affect the boot process have you tried just holding the power button for about 15 seconds to force a hard reboot?
Are there any lights or anything on the screen?
Mark.
Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app
madsatan said:
Sorry that i didnt make myself clear
What i was saying is that i boot into cwm
Cant press any fuctions (cant back up or reboot etc)
I had to use power buttom to restar the tablet
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
As stated the cwm port is still experimental but it is being worked on by emwno and im sure he will get there.
Has anyone tried the root procedure yet with the insecure boot image? I really need some feedback here.
Mark.
Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now
ktmman said:
Hey mskip,i just downloaded the toolkit and went through the insecure kernel process with no problems,tho i had already rooted using the Framaroot app. I also installed cwm and booted into it,although it's a little buggy it's useable ,just need something to flash in it now
Click to expand...
Click to collapse
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.
mskip said:
Glad its all working ok. Did you go through the ALL-IN-ONE process? Just wondering if you had installed busybox as I need someone to make a NAND backup from the backups section. If you can do that and then post a screenshot of the files (filenames and file sizes) then I can update it to a public version
Mark.
Click to expand...
Click to collapse
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.
ktmman said:
ok,i downloaded Busybox from the market,it looks like its going well,here's the data.
Click to expand...
Click to collapse
Looks good
Now I just need someone with a full stock firmware flashed that can test the ALL IN ONE process and perform a NAND backup to make sure it works from scratch. Any takers?
Mark.
I will try once I'm home
Sent from my GT-N5110 using Tapatalk HD
n5120
got n5120, lte. can I use tools or I have to wait for n5120 version?
thanx in advance for answer.
goo.im seems to be down. Got a mirror?
thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.
Sardo Numspa said:
thanks mskip
i use your nexus 4 tool kit a lot and was excited to see this one
i had already rooted via the framaroot app. was able to successfully load up CWM recovery (although it needs some help but i see in the other thread its being worked on).
also ran a backup successfully.
Click to expand...
Click to collapse
Flash Experimental #4 for your specific device (from my thread). Its working properly now.
Disclaimer: I am not responsible for any damages that may occur from using any of the information provided below. If you need help feel free to ask.
Warning: You will not be able to return to LGMS34510b after flashing D or F.
Flashing KDZ will remove root and custom recovery. You may need to unlock bootloader after flashing.
KDZ Files for LG Leon LGMS345 (MetroPCS)
LGMS345 AMTPKT MS34510F_00 MTP MetroPCS Download (Stock Android 5.1.1)(Bootloader can be Unlocked)
LGMS345 AMTPKT MS34510D_00 MTP MetroPCS Download (Stock Android 5.1.1)(Bootloader can be unlocked)
Tools:
LG Drivers - http://www.rootmetropcs.com/lg-leon/drivers/LG-Mobile-Driver_v4.0.3.0.zip
LG Flash Tool - http://www.rootmetropcs.com/lg-leon/LG_Flash_Tool_2014/LG Flash Tool 2014.zip
KDZ Extractor - http://forum.xda-developers.com/showthread.php?t=2483250
How to flash kdz: (Unbrick Phone)
Remove the battery and put it back in.
Hold the Volume Up button while connecting to USB Cable to the phone from the computer.
The Volume up button needs to be held until it reaches download mode
Having problems connecting phone?
[*]Open device manager and change the LG Mobile USB Serial port to COM 20 and restart.
Open the Flash Tool
Select Type: 3GQCT
PhoneMode: EMERGENCY
KDZ : MS34510f_00.KDZ
Click on Normal Flash
Click on Clear update registry
Country: different country
Language: English (If no language displays do not worry. Just leave blank)
Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Unlocking bootloader:
Launch the Settings Application
Scroll Down and Tap on About Phone(or About Device)
Locate the Build Number Section
Tap on the Build Number Option 7 Times
Go Back to the Main Settings Page
Scroll Down and Tap on Developer Options
Enable USB Debugging mode.
Look for the ‘OEM Unlock’ Option in the Developer Mode Section (tap and check the box)
Now the bootloader is unlocked.
One Click Root - (Root + SupuerSU)
Developed by CamoHidddenDj
Downloads:
LG ROOT ZIP (LG Leon one click root zip)
LG Drivers (LG Universal drivers. You may already have installed)
Navigate to downloads and install LG Drivers.
Navigate to download location and UNZIP the file. LG_Leon_OCR_v2.zip
Navigate to the unzipped folder \LG_Leon_OCR_v2
Connect your LG leon to the computer via USB cable. Make sure you have unlocked bootloader.
In the LG_Leon_OCR_v2 folder click the root.bat (This will root your device)
follow the instructions and wait. (Phone will reboot a couple times)
When done you may need to remove battery and reboot.
You are now rooted.
Custom Recovery for LG Leon MS345
Developed by Unjustified Dev
Downloads:
TWRP - Download
How to install custom recovery
Install Flashify from playstore.
Open Flashify
Grant Superuser permissions.
Under Flash Tab Click Recovery Image
Choose file explorer and navigate to where you save twrp-2.8.7.0-ms345.img and select.
It will ask Flash recovery? Tap YUP!
Once recovery has finished flashing it will ask if you want to reboot. Click Ok.
This should boot you into TWRP Recovery mode.
Xposed for LG Leon MS345
Created by rovo89
Downloads:
Xposed Installer APK - (Xposed Installer APP For LG Leon)
Xposed Lollipop Framework - (Xposed Lollipop 5.1.1 for LG Leon)'
How to Install Xposed
Boot into recovery TWRP
Tap Install
Navigate to folder you saved xposed-v79-sdk22-arm.zip and select.
Swipe to confirm Flash.
When Flash is complete Reboot to System.
Install XposedInstall_3.0_alpha4.apk
Now you should have Xposed framework installed and be able to download modules.
Custom Roms:
cm-12.1-20150906-UNOFFICIAL - Created by LEPT-Development (Camera does not work)
Mod Edit: OP Quote removed
hello what is the decrypt key for the mega links
JTOSYNCROW said:
hello what is the decrypt key for the mega links
Click to expand...
Click to collapse
My guess is this post has to do with that link to the custom TWRP recovery and that it's all a scheme to get us to click through. He could easily post the mega.nz link directly. I might have to say this one is a false flag unless someone else can hopefully prove me wrong.
mario0318 said:
My guess is this post has to do with that link to the custom TWRP recovery and that it's all a scheme to get us to click through. He could easily post the mega.nz link directly. I might have to say this one is a false flag unless someone else can hopefully prove me wrong.
Click to expand...
Click to collapse
I will upload to personal server today. All methods work and been tested. Should not need decryption key for any files. Will post new links today.
All links have been updated and tested multiple times. If you can not get this to work it is something you are doing wrong. Either you do not have the MetroPCS variant or you did not follow directions. Make sure you are using the LG Leon MS345 10 d/e/y and you follow directions. I have personally tested these methods numerous times and all work without a problem. Thanks.
Do Not flash this on a LG Risio from Cricket. It will hard brick and no longer power on =( Flashes fine though, lol
I have that issue with supesu binary update. I finally got it to say installed successfully after trying to update it immediately after root checking. Although after i did the reboot kingroot showed up in the notification bar to root again. Any advice?
---------- Post added at 10:42 AM ---------- Previous post was at 10:41 AM ----------
Oh also it messages me on *occasion* that another superuser is installed.
I rooted with Kingroot, used the Kingroot to Su script, installed Flashify to flash recovery.....all good right now.
Will it work for LG-H324t v10c Philippines?
Link
Brother the links not working
All these links go to BS!
yes for some reason links arent working
Missing a Step
Step one go to Settings after that go to General then click Developer options and the final step is to Enable OEM unlock. this should get rid of the security error code 1003.
my phone type is MS34510f Lg Leon with android version 5.1.1
dmmckitrick said:
Disclaimer: I am not responsible for any damages that may occur from using any of the information provided below. If you need help feel free to ask.
Warning: You will not be able to return to LGMS34510b after flashing D or F.
Flashing KDZ will remove root and custom recovery. You may need to unlock bootloader after flashing.
KDZ Files for LG Leon LGMS345 (MetroPCS)
LGMS345 AMTPKT MS34510F_00 MTP MetroPCS Download (Stock Android 5.1.1)(Bootloader can be Unlocked)
LGMS345 AMTPKT MS34510D_00 MTP MetroPCS Download (Stock Android 5.1.1)(Bootloader can be unlocked)
Tools:
LG Drivers - http://www.rootmetropcs.com/lg-leon/drivers/LG-Mobile-Driver_v4.0.3.0.zip
LG Flash Tool - http://www.rootmetropcs.com/lg-leon/LG_Flash_Tool_2014/LG Flash Tool 2014.zip
KDZ Extractor - http://forum.xda-developers.com/showthread.php?t=2483250
How to flash kdz: (Unbrick Phone)
Remove the battery and put it back in.
Hold the Volume Up button while connecting to USB Cable to the phone from the computer.
The Volume up button needs to be held until it reaches download mode
Having problems connecting phone?
[*]Open device manager and change the LG Mobile USB Serial port to COM 20 and restart.
Open the Flash Tool
Select Type: 3GQCT
PhoneMode: EMERGENCY
KDZ : MS34510f_00.KDZ
Click on Normal Flash
Click on Clear update registry
Country: different country
Language: English (If no language displays do not worry. Just leave blank)
Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Unlocking bootloader:
Launch the Settings Application
Scroll Down and Tap on About Phone(or About Device)
Locate the Build Number Section
Tap on the Build Number Option 7 Times
Go Back to the Main Settings Page
Scroll Down and Tap on Developer Options
Enable USB Debugging mode.
Look for the ‘OEM Unlock’ Option in the Developer Mode Section (tap and check the box)
Now the bootloader is unlocked.
One Click Root - (Root + SupuerSU)
Developed by CamoHidddenDj
Downloads:
LG ROOT ZIP (LG Leon one click root zip)
LG Drivers (LG Universal drivers. You may already have installed)
Navigate to downloads and install LG Drivers.
Navigate to download location and UNZIP the file. LG_Leon_OCR_v2.zip
Navigate to the unzipped folder \LG_Leon_OCR_v2
Connect your LG leon to the computer via USB cable. Make sure you have unlocked bootloader.
In the LG_Leon_OCR_v2 folder click the root.bat (This will root your device)
follow the instructions and wait. (Phone will reboot a couple times)
When done you may need to remove battery and reboot.
You are now rooted.
Custom Recovery for LG Leon MS345
Developed by Unjustified Dev
Downloads:
TWRP - Download
How to install custom recovery
Install Flashify from playstore.
Open Flashify
Grant Superuser permissions.
Under Flash Tab Click Recovery Image
Choose file explorer and navigate to where you save twrp-2.8.7.0-ms345.img and select.
It will ask Flash recovery? Tap YUP!
Once recovery has finished flashing it will ask if you want to reboot. Click Ok.
This should boot you into TWRP Recovery mode.
Xposed for LG Leon MS345
Created by rovo89
Downloads:
Xposed Installer APK - (Xposed Installer APP For LG Leon)
Xposed Lollipop Framework - (Xposed Lollipop 5.1.1 for LG Leon)'
How to Install Xposed
Boot into recovery TWRP
Tap Install
Navigate to folder you saved xposed-v79-sdk22-arm.zip and select.
Swipe to confirm Flash.
When Flash is complete Reboot to System.
Install XposedInstall_3.0_alpha4.apk
Now you should have Xposed framework installed and be able to download modules.
Custom Roms:
cm-12.1-20150906-UNOFFICIAL - Created by LEPT-Development (Camera does not work)
Click to expand...
Click to collapse
Terrible, so much effort was put into making a pretty awesome post with all the tools needed to handle the Leon..... and all links are trash...
does anyone moderate around here?
very annoying for XDA I expect more.....
going to android central
Hi, someone can send me the aboot.bin file from an unlocked phone? thanks
I have went through and found working links for the files that did not having working links.
LG Drivers - http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
LG Flash Tool - http://etp.tfm.ro/LG Flash Tool 2014.zip
LG One Click Root - http://androidforums.com/attachments/lg_leon_ocr_v2-zip.93091/
LG MS345 Custom TWRP Recovery - http://qc1.androidfilehost.com/dl/K...611/24052804347772357/twrp-2.8.7.0-ms345.img?
XPosed Installer APK - http://www.apkmirror.com/wp-content...d.xposed.installer-3.0_alpha4-37-minAPI15.apk
XPosed Lollipop Framework - https://ga1.androidfilehost.com/dl/...7/24336189125296133/xposed-v79-sdk22-arm.zip?
CyanogenMod 12.1 for LG MS345 - https://www.androidfilehost.com/?fid=24052804347809242
Please let me know if any of these need correcting.
You guys are better off trying the XenonHD ROM. Much speedier than CM 12 at least on the MS345. Check it out here. Please be sure to read through the thread though. There are a few minor issues, especially with the camera not working, same with this CM 12 ROM. Third party camera apps may work though.
Hello XDA.
This afaik is where the gurus Nest, and I'd really appreciate some help.
MS 345 (leon)
Status/operability. (using windows 7)
Boot = loop / Fail. (optimizing app 1/31)
Download/Firmware Mode = accessible
Factory Reset = accessible, but avails nothing.
Android MTP device driver installation (Fails.)
LGE Mobile USB composite Device (Installs)
--------------------------------------------------------------------------------------------
Background/info:
I want to either go stock on this phone, or get the system to forget about "optimizing apps" and actually BOOT.
LG suite cannot communicate with Device.
Flash tool will complete – but I cannot revert this an older version.
Phone uses a custom “Factory Reset” script/menu. Its all pretty whereas the usual stock android ones are text based only.
History :
( When it had original firmware
>>Brother Does his handiwork (Problem) phone hangs during MetroPCS logo Animation. Factory reset at this point avails nothing.
>>Flashed to later Revision of firmware from LG / Metro Rev b. to d.
>> Optimizing app 1/31 – goes to around 22, reboots before finishing. Endless.
My suspicion is that the phone doesn't have enough free space to do what it needs to re:moving operations Mind you, I'm a novice when it comes to the android realm, but i could not clear the cache due to the strange recovery menu / bootup rom LG uses.
At this point I reckon my options are :
1. Access the partitions directly using ADB / a partition tool and wipe the partition so I could flash it with the original OS.
Is this a viable option? (apparently NOT, because I cannot enable USB debugging)
I have downloaded and installed Android Studio, and even tried the stand alone SDK windows package.
Here where my obstacles:
ADB cannot see phone. command:adb Devices)
Again, People recommend putting phone into USB debug mode in Android>Settings. But that's not an option with a 'bricked' phone. I tried to manually install several drivers (for MTP) but none of them work, only the composite ones. But I didnt know whether MTP drive would be mandatory to access the partitions.
In my most recent attempt at fixing this phone, I've tried (or attempted) the instructions found on these pages:
(removed)
Strangely even though I can use the flash program and operate on the phone, I still cannot use ADB to access the phone so I can wipe the partitions.
If anyone knows how else I could REALLY wipe this Android, or think I am on the wrong Path. Please, please help.
ps. This guy said I CANNOT revert to a previous OS:
(removed)
Hi Everyone,
Do you know if the T-Mobile version of the LG Leon can be customized in the same manner as these posts shown above?
Please advise,
Hello, everyone.
Even after flashing stock ROM with kdz your L90 may still display ROOTED in download mode or in the RCT test (open Telephone app and type 3845#*XXX# where XXX is your phone model, 410 for instance if you have a D410hn). The fix is relatively simple:
1. While still rooted, use a file manager with root access and navigate to /persist folder, then backup to a safe place (just in case you need them later) and delete these two files:
rct
rct.cfg
2. Reboot to recovery and do a full wipe: caches, data and system. It's important because maybe some files that trigger the rooted flag may be in /data/local/tmp, for instance;
3. Reboot to Download Mode (bootloader) and follow this tutorial to flash stock kdz:
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
Before flashing kdz you shouldn't already see any ROOTED on screen, and after booting to stock the RCT tool should not display that your device is rooted anymore.
PS: I am not sure if deleting these two files will break anything, I have just did these steps and my device doesn't show ROOTED anymore. Ideally, you should backup /persist before rooting (I don't think it's possible anyway, at least not on Lollipop), or at least backup them just after rooting, so you can replace the files as explained is the treads bellow.
Credits
@Drachenminister - http://forum.xda-developers.com/showthread.php?t=2700992
@AriHell - http://forum.xda-developers.com/lg-g3/general/tot-reset-rct-root-check-tool-t2853627
@k0nane - http://forum.xda-developers.com/showthread.php?p=41136026#post41136026
A/A & Welcome,
READ THE FULL GUIDE OR YOU CAN LAND IN TROUBLE
Ain't gonna work on pie official
AND DO PRESS THE THANKS BUTTON
Disclaimer
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or anything that happens to your device
INTRO
This is a full guide for unlock/relock, install TWRP, Root your device and backup/restore stock OS. Each and every step is explained thoroughly with pictures and videos.
I have ASUS Zenfone Max Pro M1 (6GB variant) (X00TD) (ZB601KL), so I can’t test for other variants. Please report back issues, corrections, omissions, etc., though the guide should work for all devices.
THINGS TO KNOW (IMPORTANT)
~Every text written in double quotes “” means the same written without the quotes.
e.g.:- “abcd” means abcd
“zxcv” means zxcv
They (“”) help to separate usual text from the other text (like a command, file name, etc.)
~If you have not enabled file name extensions then you will see files without their extension and vice versa
e.g.:- “filename”, “mypicture” in 1st case
“filename.extension”, “mypicture.png” in 2nd case, respectively.
~Boot Partition or Bootloader:-This is the partition that enables the phone to boot. Without this partition, the device will not be able to boot.
~Recovery Partition:-Recovery partition lets you boots the device into a recovery mode to perform recovery tasks.
~TWRP: - stands for TeamWin Recovery Project. It is a custom touch recovery that is GUI based.
~Flashing: - simplest: - installing
~Fastboot Partition: - lets us reflash partitions. (On device)
~Fastboot: - is an executable used to reflash partitions. It comes with the Android SDK. (On PC)
~Rooting: - an Android phone lets owner edit system files. Thus enabling various tweaks and use of apps that require root access.
~Device driver: - determines how PC will communicate with a device.
~Unlocking/Relocking:-With a locked Bootloader, booting into custom things is not allowed is not. Unlocking lets us do so.
~Reboot: - Switching ON AND OFF (in simple terms)
Requirements
MIND, PC, USB Cable, Internet, Fully charged PC (Windows OS), and obviously Asus Zenfone Max Pro M1
The Real Steps From Here
FOLLOWING THIS GUIDE YOU WILL PROBABLY LOSE ALL THE DATA ON YOUR PHONE SO MAKE A BACKUP FIRST (Don’t worry it’s in guide too)
STEP 1. Downloading all the necessary files
a. Here are 2 zip file with everything you will probably need following the guide :-
basic zip
extension zip
. I have tested the procedures using these files only so maybe other versions might not work. A “guide.doc” with the same text as in here (on XDA) is also present. It will be of great help if you don’t have internet connection in PC.
The basic zip file contains minium files needed.
The extension zip file contains the TWRP recovery(then one used in the guide),guide.docx ,and the videos used here too.
Copy the twrp file to unlock folder of extracted folder.
b. Extract the zip file above.
First download the zip file and Copy to PC
Then Right Click on it
Then click “Extract All”
Uncheck “Show extracted files…”
Click on “Extract”
The folder “zip” will be extracted
Done
This “zip” folder will be called extracted folder in the guide video link to extract zip
To download most up to date version of the files go to links present at last
STEP 2. BACKUP
a. Use an apk backup tool to backup app installers
VIDEO TO BACKUP APP INSTALLERS
b. Some APPS like Whatsapp, etc. have backup to drive function use that
VIDEO TO BACKUP WHATSAPP CHATS
c. Backup SMS AND Call Logs
VIDEO TO BACKUP CALL LOGS AND MESSAGES
d. Copy each and every file from you internal storage to PC.
Video to backup each file to pc
DONE
Step 3. UNLOCKING BOOTLOADER(Data will be wiped)
2 options:-
A. Official Method (NOT TESTED): -
In extracted folder go to “unlock” folder then “Official” folder. Install the “UnlockTool_9.1.0.3_180621_fulldpi_signed_ZB601KL.apk” in Asus and follow the steps from there.
B. Unofficial Method (Tested):-
a. Installing Drivers
Connect phone using USB cable to PC
Right click on This Pc
Go to “Manage” > “Device Manager” Or Just search for “Computer Management”/“Device Manager”
A list will appear.
Find your device (best way to do so is by disconnecting/connecting the device and notice the changes accordingly in the list)
Now right click on it>”Update Driver Software”>“Browse my computer for driver software”
Now either enter path of the driver folder or click on browse and navigate to the driver path from there.
Press Next OR
“Let me pick …”>and select the driver
video to install driver
The drivers have been installed
b. Booting into FASTBOOT
Switch Off the Phone
Hold the Volume UP and Power ON Button Simultaneously
Device buttons labbled image
You will see this on your phone
image of FASTBOOT screen
c. Unlocking Bootloader
Now connect phone using USB cable to PC
Look for the “unlock” folder in the extracted folder.
Open it
Find “unlock.cmd” or “unlock” file
(Or “unlock no erase.cmd” to keep data {not tested})
Open it
Done
d. You will see some messages in yellow/brown/white colour on your phone
You will most probably see “encrypting your device”, “warning Bootloader unlocked” messages, let phone do its work and don’t interrupt it, and keep cable connected. Phone might reboot too. The phone will at last boot into stock OS and you will see the device setup screen.
image of the warning message
e. Now if you wanted TO ONLY UNLOCK BOOTLOADER THEN THE JOB IS DONE, long press power button. If you want to root or flash TWRP then continue (Tested method to root requires TWRP flashing or you can try the untested method to root only)
Step4. Installing/Flashing TWRP
TESTED METHOD
a. Connect phone using USB cable to PC
b. Don’t setup your device just now because possibilities are you might lose the data again
c. Boot into fastboot mode
d. Open the “unlock” folder in the extracted folder.
Now Two Different ways to opt for from here:-
i. THE LAZY METHOD (Tested)
a. Open “flash_recovery.bat” or “flash_recovery” in the “unlock” folder of the extracted folder.
b. You can flash the tested or any other recovery using this script.
c. Follow the steps from the script
video of how to use the script
d.Then go to step of Flashing ZIPS of The Manual Method
e. Done
OR
ii. The Manual Method (Tested)
a. Keeping Shift Key pressed, right click {with mouse} in the blank white space of the “unlock” folder’s explorer window.
b. From the menu select “open command window here”
c. A CMD window will be opened
open cmd video
d. Now type “fastboot devices”
e. See if your device is connected. You will see something like this
f. Now type “fastboot flash recovery twrp-3.2.3-0-X00TD-20181024.img”
If you want to flash any other recovery instead of “twrp-3.2.3-0-X00TD-20181024.img” write the file name of your recovery file. Make sure it’s in “unlock folder”. Though this recovery is the only tested one (by me).
g. Now keeping the phone connected to PC, boot into TWRP/Recovery by pressing the Volume Down and Power ON Button Simultaneously.
h. The usual warnings, messages and recovery boot screen will flash:-
warning image
twrp flash screen image
i. It may take some time to load so wait for at least 2 minutes.
j. Now if touch is not working press power button 2 times (on and off the screen)
video showing how to enable touch in twrp
k. If it shows “Swipe to Unlock” do so. If it shows “Swipe to Allow Modifications” then wait and continue reading …
swipe to allow image
swipe to unlock
l. “Swipe to Allow Modifications” means you allow TWRP to modify system. This will make sure TWRP remains in the phone and not just vanish after a reboot but it also means you will have to flash some other files to be able to boot into stock rom back.
m.
2 ways from here:-
i. Now after swiping, Decrypt Screen will appear just press cancel.
decrypt screen image
OR
ii. If you have data on the device then enter pin/password or try default_password.
If you had kept pattern then either go back and change it or try this:-
1 2 3
4 5 6
7 8 9
these no’s correspond to pattern dots.
Say you kept pattern “third row left to right” then the password is 789 .
If all these fail then you will have to lose your data.
n. As we don’t have any precious data in our phone we will (or you are compromising)
Press “Wipe”
Press “Format Data”
TYPE “yes”
Press “tick” or “enter key”
Done
wipe data video
>Flashing ZIPS
o. Now Copy these 2 files
i. “decrypt.zip” or “decrypt”
ii. “Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip” or “Disable_Dm-Verity_ForceEncrypt_12.16.2018”
From extracted folder to your phones internal storage.
p. Go to Install>select the zip>swipe to flash (flash dm_verity… then decrypt…)
If you don’t see your device storage connected then try reconnecting using USB cable and also check if MTP is enabled.
enable mtp video
>Done
Want to root? Then continue…
or >
Now reboot to system Go to Reboot>System
video to show how to rebbot to system in twrp
Step 5. Rooting
We will be using Magisk to root you can use any other method but this is the only tested method.
a. Copy “Magisk-v18.0.zip” or “Magisk-v18.0” to your phones internal storage from extracted folder.
b. Go to Install>select Magisk…>swipe to flash
Done
c. Now reboot to system Go to Reboot>System
reboot video
e. To use Magisk properly you may need to download latest apk. (Link at last)
Step 6. Relock (NOT TESTED)
a. Connect phone using USB cable to PC
b. Boot into fastboot mode
c. Open “Relock” folder from extracted folder
d. Open “relock.cmd” or “relock” file
Done
Step 7. RESTORING
a. First setup the Device again
b. Copy each and every file back to the phone storage
c. Now to restore messages see the restoring part of this video here
d. WhatsApp messages will be automatically restored after you install the app with same number as before.
Tips
After rooting don’t just go on and flash a custom rom. Take a backup first (of all partitions) using TWRP and keep it safe somewhere so you won’t need to find unbrick tutorials later. Plus you will have your most stable and tailored rom with you.
Also don’t just go on and flash xyz mod. Research and then Flash.
Magisk is our best friend. It lets you do modifications without hurting the system. The Magisk modules are most safe mods as they can be reverted back easily.
And don’t just go on and debloat stock OS. In Magisk there is a module called Debloater use that. You can easily revert back if anything goes wrong.
Other good Magisk modules: - Energized, Systemizer, MidnightCore & Advanced Charging Controller (acc) but do read their XDA guides first.
Sources/Credits:-
Dm_Verity.zip Official XDA:-
link
Original unlocking XDA:-
link
Magisk XDA:-
link
Original Decrypt Data XDA:-
link
TWRP Used XDA:-
link
Credits to the authors of the above guides
Plus sorry for bad editing of videos. I am facing some problems. Will try to post better videos.
I thank all the members who have made the previous guides for their hard work. This guide by no means disrespects their hard work. This guide is just an Addition instead of an Alternative.
Read the full guide
Press the thanks button
Re edited the guide.
Added link of apps used in YouTube videos.
Not working for pie official
Deleted cruddy comments. Good job.
Good initiative but not so good noob guide. Please format it for better organization and better understanding.
malikmiran19 said:
2. BACKUP
>Use an apk backup tool to backup app installers
howto video
Click to expand...
Click to collapse
Appreciate the effort . I have a suggestion. It would be helpful to put the name or link of the app that you used to back up apks.(some apk extractor lite ig). I'll provide the one I found anyway. https://www.apkmirror.com/apk/ankit.../apk-extractor-lite-2-8-android-apk-download/
camaroamarelo said:
Good initiative but not so good noob guide. Please format it for better organization and better understanding.
Click to expand...
Click to collapse
Did so
GliderZ said:
Appreciate the effort . I have a suggestion. It would be helpful to put the name or link of the app that you used to back up apks.(some apk extractor lite ig). I'll provide the one I found anyway. https://www.apkmirror.com/apk/ankit.../apk-extractor-lite-2-8-android-apk-download/
Click to expand...
Click to collapse
Added apk links in YouTube videos
Anyone tried unlocking without erasing data?
TheDarkKnight said:
Anyone tried unlocking without erasing data?
Click to expand...
Click to collapse
nyimak
fuzuy said:
nyimak
Click to expand...
Click to collapse
What?
TheDarkKnight said:
What?
Click to expand...
Click to collapse
it means im interested in your question and im following it
I want to unlock bootloader, flash TWRP and flash a custom ROM (Cerberus OS).
I have rooted and flashed TWRP before in my previous device but I'm not familiar with unlocking and Custom ROM.
Do I have to follow all hese steps for what I want to do or I must skip decrypt/encrypt and Magisk?
dharsouparno1 said:
I want to unlock bootloader, flash TWRP and Custom ROM.
Click to expand...
Click to collapse
U can flash twrp then flash ROM and probably flash magisk for root tooo
malikmiran19 said:
U can flash twrp then flash ROM and probably flash magisk for root tooo
Click to expand...
Click to collapse
Thanks for the help.
I'm running into some problems while installing the driver software on my Windows 10 laptop. It shows Error 10 this device cannot start.
I tried to uninstall and reinstall the drivers, rebooted my pc on every step, tried to install while connected to my phone, but nothing seems to work.
I've installed the Pie Beta for Asus Zenfone Max Pro M1 (not sure if this is causing it)
Is there a solution to this problem?
I am currently on Beta Pie...will these methods work for bootloader unlocking and TWRP, custom rom flash ???? I just wanna use PE/Havoc OS rom...no other tweaks or root
thanks its working
I updated to pie beta and I think this guide is not working for that, because when flashing twrp. I'm getting 'request download size is more than allowed size' and I tried every way possible to solve it. But no luck Hope you can help me with it, or maybe it'll work after stable version?
---------- Post added at 04:15 AM ---------- Previous post was at 04:11 AM ----------
utsavdey said:
I am currently on Beta Pie...will these methods work for bootloader unlocking and TWRP, custom rom flash ???? I just wanna use PE/Havoc OS rom...no other tweaks or root
Click to expand...
Click to collapse
It's not working for me. I also updated to pie beta few days back.
Is this method working on pie stable build
Anyone tried this method on the stable pie build 056?