Systemless SupeSU and systemless Xposed - No OTA flashes - Xposed General

Hi folks,
i hope i im the right Forum as it seams more a xposed as supersu problem.
I have a Moto X Style rooted with System-less SuperSU 2.78 and Xposed "xposed-v86.1-sdk23" by romracer, Stock ROM 6.0.
Just got a notification that there is a security update available, proceeded but won´t flash. Stops with Error Code 7.
I thought OTA would work with system-less.
Tried also with disable Xposed. Same result. By the way when the phone reboots for flashing it goes into The Recover TWRP 3.0.2 GUI. Anyway i saw the error when switching to the log view.
Any idea whats wrong or i miss?
May i have to restore custom recovery, and if so can i flash the stock recovery with the existing TWRP or do i have to go ADB?
Thanks
Thomas

You have to flash stock recovery image (and probably also boot image) for OTA to work.
Simply use fastboot to flash those. Leave system intact.

Thanks, will do so.

Related

Lost TWRP and root after installing rom

Hey everyone
I've been using the XT1053 Retail US Stock Lollipop Flashable ZIP without issue for quite a while, but decided to update to the modded version 2. So I flashed it, xposed, and supersu again. Booted up, everything was okay. But then it said I needed to update my supersu binary and that I didn't have root, so I went to reboot into recovery and flash supersu once more.
However, now I can't access TWRP and it merely says "no command"
Should I just try installing TWRP again or is there a way to see if it's still installed? It's weird that this happened after flashing a rom
edit: reflashed twrp recovery img, back to normal. Can't explain what caused this though

Unrooting does not work..phone doesnt boot

I want to switch from SuperSU 2.79 to Magisk. I tried the unrooting option in SuperSU but the phone doesnt boot, it stays on the google image. Reflashed SuperSU 2.79 and phone boots without a problem.
Then i booted into botloader and flashed the original stock boot.img from n6f27c factory image, but same result, phone stays at the google image and doesnt boot. Reflasing supersu 2.79 fixes the problem.
What would be the best way to move from supersu to magisk without having to completely wipe phone and flash n6f27c factory file.
Would flashing boot.img and system.img be enough? And then install magisk from twrp to get root again or is there another option that works.
TMG1961 said:
I want to switch from SuperSU 2.79 to Magisk. I tried the unrooting option in SuperSU but the phone doesnt boot, it stays on the google image. Reflashed SuperSU 2.79 and phone boots without a problem.
Then i booted into botloader and flashed the original stock boot.img from n6f27c factory image, but same result, phone stays at the google image and doesnt boot. Reflasing supersu 2.79 fixes the problem.
What would be the best way to move from supersu to magisk without having to completely wipe phone and flash n6f27c factory file.
Would flashing boot.img and system.img be enough? And then install magisk from twrp to get root again or is there another option that works.
Click to expand...
Click to collapse
Try using unsu.zip. You can find it in osm0sis' odds and ends thread. Scroll down through the first post.
ktmom said:
Try using unsu.zip. You can find it in osm0sis' odds and ends thread. Scroll down through the first post.
Click to expand...
Click to collapse
Thanks, that did the trick. Rooted with Magisk now.

TWRP and root are gone

Question for those you you way smarter than I'll ever hope to be. I randomly lost root and TWRP on my 3T and I have no idea how this happened.
Quick (or not so quick) background - I was stock rooted OOS 4.1.6. I disabled AdAway for a bit yesterday to gain access to something it was blocking (done it many times) and when I re-enabled it my phone was stuck in a boot loop afterwards. Weird, but not concerning. I booted into TWRP and restored a backup. OOS 4.1.3 was my latest backup, so after successfully loading that up, I flashed the full 4.1.6 OTA and SuperSu as I've done before to update. Worked fine. Was adding my preferred mods via Substratum and Magisk and I messed up. Couldn't get Substratum to work properly and couldn't get Magisk to update to 13.1. I verified I had root, which I did. Went back to TWRP and reflashed 4.1.6 and SuperSU. When my phone was up and running again I didn't have root. Weird, so I tried again, still couldn't get SuperSU to flash properly. Got frustrated and figured I haven't had a clean install since getting the device in January. Every update I've flashed via TWRP has been dirty. So, factory reset, blah, blah, blah. Done it plenty of times with many devices. Flashed the OTA and SuperSu again, but noticed SuperSu failed. Rebooted recovery to try again, but it went to the stock recovery. My phone is working fine now, but I'm without root and I no longer have TWRP.
What might have caused this to happen? And how can I avoid it in the future? I know how to get it back (I'll do it after work) but it's frustrating.
What version of TWRP are you using? A few of the past versions have been having problems.
If you're already using Magisk anyways, just flash the Magisk zip and use that as your rooting solution. IIRC, the more recent versions of Magisk are no longer compatible with SuperSU anyways.
Anova's Origin said:
What version of TWRP are you using? A few of the past versions have been having problems.
If you're already using Magisk anyways, just flash the Magisk zip and use that as your rooting solution. IIRC, the more recent versions of Magisk are no longer compatible with SuperSU anyways.
Click to expand...
Click to collapse
I was using 3.0.4-1. Never had an issue before. But after I factory reset my phone and clean flashed the 4.1.6 update I ended up with the stock recovery. Unless I'm mistaken, I can't flash Magisk until I have TWRP again. I know how to get it back, I was more curious as to how this may have happened in the first place. What would have caused my root and custom recovery to disappear?
Rodeojones said:
I was using 3.0.4-1. Never had an issue before. But after I factory reset my phone and clean flashed the 4.1.6 update I ended up with the stock recovery. Unless I'm mistaken, I can't flash Magisk until I have TWRP again. I know how to get it back, I was more curious as to how this may have happened in the first place. What would have caused my root and custom recovery to disappear?
Click to expand...
Click to collapse
My mistake, I meant to ask SuperSU version, not TWRP. If SuperSU failed to root your phone after dirty flashing OOS (even if there was not error message), OOS will replace your recovery with the stock one.
Anova's Origin said:
My mistake, I meant to ask SuperSU version, not TWRP. If SuperSU failed to root your phone after dirty flashing OOS (even if there was not error message), OOS will replace your recovery with the stock one.
Click to expand...
Click to collapse
I was using version 2.8.2. Regardless, you answered my question as to how it happened in the first place, so thanks.

absolute cluster**** after attempting to move from 4.5.0 to 5.0

So... was tired of some miscellaneous issues with 4.5.0 (rooted w/ Magisk, TWRP recovery) and decided to finally jump to 5.0. Failed initially in TWRP (was using stock 3.1.xx), moved to the OOS internal upgrade option, and actually managed to boot into 5.0 (albeit stock recovery and no root) after that succeeded.
Powered off, connected to PC, fastboot flashed TWRP 3.1.1 blu spark, rebooted into recovery, reflashed blue spark img, flashed OnePlus3TOxygen_28_OTA_060_all_1711160447.zip (went fine AFAIK, "script succeeded, 1.0000"). Cleared Dalvik/cache, flashed SuperSU v2.82... and this is where things got weird. First, flashing SuperSU failed once at the point of compressing the ramdisk. rebooted into TWRP, tried again, and it finished without error messages. Wiped Dalvik/cache once more and rebooted. This time, I got a permanent boot where my OP3T appeared to freeze at the first OP logo on a black background and would go no further even after 10+ minutes. Swapped out my SuperSU zip with a download straight from their website, same frozen boot. Redownloaded OTA_060_all, same thing. Wiped dalvik/cache/system before each attempt, no luck.
Gave up, fastboot -w, reflashed TWRP blu spark, and now even just drying to flash the plain OTA_060 zip results in a "no OS installed" when I try to reboot. When I try to flash either Magisk v15 or SuperSU 2.82, TWRP freezes entirely in the first steps, crashes to a white notification icon, and requires a long power button hold to reboot. I am lost at this point. AFAIK, my OP3T is basically a blank, wiped slate, and I've never experienced full-on TWRP freezes while flashing before blu spark.
In the meantime, I've installed OTA_057 (4.5.1) instead, thankfully without a bootloop, but fully wiped any suggestions?
I've jumped from Nougat to Oreo too. These are my steps: while on nougat open the TWRP recovery (stock TWRP); MAKE A COMPLETE BACKUP; updated it to the latest version (3.2.1.0.- if you have it installed then there's no need for this step); complete wipe; install the OTA using USB OTG; boot to system; run the first setup; (now TWRP might got overwritten just reboot to recovery, if it reboots to TWRP great, move on, if not then reboot to system and install TWRP using ADB); reboot to TWRP recovery; flash Magisk 15 (or SuperSU, but I don't use it so I can't say if it works); flash kernel if you want; reboot to system; check if Magisk/SuperSU works and that's it. At this point I've made another complete backup just in case I skrew up something in the future. Hope I helped! Good luck!
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Tagtag123 said:
Are you using supersu 2.82 SR5.
I had same problem with my 3T going from nougat to oreo.
Click to expand...
Click to collapse
Yep, I believe that's exactly the version I tried I eventually just gave up after doing the complete device wipe through fastboot commands, am now running 5.0 with no problems but have the stock recovery and am not rooted :/ Now I just need to make a backup and then I can mess around and try and find a root method that doesn't basically soft brick my phone...
Even I am running OOS 5.0
The way I rooted is:
Flashed oos 5.0 using TWRP (https://forum.xda-developers.com/devdb/project/dl/?id=27381&task=get)
Boot normally
Reboot to TWRP, flash TWRP using fastboot if you find stock recovery. Then boot to TWRP.
After you in the TWRP recovery, flash superSU 2.82 SR5
Then flash suhide (it helps you hide root from apps which are a bit finicky about root).
This works for me.
SuperSU v2.82-SR5 flashable ZIP:
http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
suhide v1.09 flashable ZIP:
http://download.chainfire.eu/1219/suhide/UPDATE-suhide-v1.09-20171001222116.zip
I just followed these steps coming from rooted 4.5.1 and worked perfectly.
https://forums.oneplus.net/threads/guide-how-to-install-oos-5-0-over-rooted-4-5-1.684519/
Unleashed by my rooted OP3T in 8.0

Rooting Moto G6 with PPS29-118-15-11. What versions of noverity, twrp, magisk to use?

Hello forum, I have been trying to root my motorola G6..
After much struggle, getting stuck in a boot loop and other issues I finally have restored stock roms and now have build PPS29-118-15-11 installed. So at least the phone works again My bootloader is unlocked.
But I still want to root it.
I think I understand the procedure well enough, but I am unsure of the correct/best versions I need for the ROMS/boot, Magisk, and TWRP.
ROMS/boot:
I found a youtube with instructions for updating Android v9
But I haven't tried it as this recommends a boot img:
OPS27.104-15-10_no-verity_boot.img
OPS27.104-15-10_no-verity_boot.img | by dejello for Moto G6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I am reluctant to use the above as it looks to be a downgrade from my current version 29-118-15-11.
Also, I thought that the filename prefix "O" indicated oreo instead of "P" for pie? So would this be a version 8 file?
TWRP:
Similarly, I am not sure if I am using the right, or best TWRP version. I currently have twrp-v3.2.3-ali.img
I flash this (with fastboot) and it works but shortly after I encounter the "no command" error (when booting to recovery) and I have to redo it. I am NOT overwriting it with a stock recovery.img.
I have also run into the "encryption password" problem, where I am unable to provide one to decrypt the data partition. So I can't backup the data with twrp (something I really would like to do).
Magisk
I have Magisk-23-0.zip
But I saw a post from brunogroa that recommends installing Magisk 19 and updating it to 23 later. Is this something that is required or can I just install v23?
So, I am looking for the correct versions for ROM, Magisk and TWRP to use, given that I have installed PPS29-118-15-11
Any assistance will be greatly appreciated.
Well I finally have it I think. I noticed a comment in
[GUIDE][ROOT][Moto G6][ALI] TWRP, Root, and Magisk installation guide. by djello
"(you may not need a modified boot image for Magisk)"
When using PIE instead of OREO.
Being an optimist, I gave it a try and it worked... I installed Magisk and was able to verify root access using the Root Checker Basic App. Kept stock boot img.
This is probably not too amazing for the old hands but us newbies need a break every now and them
So in the end, all I had to do was:
(0) Unlock bootloader
(1) Install stock PPS29-118-15-11
Done earlier with another version of twrp.
Install TWRP 3.5.2
(2) fastboot flash recovery twrp-3.5.2_9-0-ali.img
(3) Use twrp to install Magisk
adb push Magisk-v23-0.zip /tmp
Boot phone into recovery and use twrp to install Magisk
(4) Boot the phone into System and verify Magisk is there and use Root Checker App to confirm I am now rooted.
Issues:
I noticed that a security update for
PPS29-118-15-11-5 failed to apply.
The phone boots into recovery mode and asks for the decrypt password. I don't know the password to decrypt data and how to proceed from here.
I suspect that if I flash the stock recovery img the security update might work. If anyone knows please comment ; I will research this also and maybe just try it.
pdpantages said:
Well I finally have it I think. I noticed a comment in
[GUIDE][ROOT][Moto G6][ALI] TWRP, Root, and Magisk installation guide. by djello
"(you may not need a modified boot image for Magisk)"
When using PIE instead of OREO.
Being an optimist, I gave it a try and it worked... I installed Magisk and was able to verify root access using the Root Checker Basic App. Kept stock boot img.
This is probably not too amazing for the old hands but us newbies need a break every now and them
So in the end, all I had to do was:
(0) Unlock bootloader
(1) Install stock PPS29-118-15-11
Done earlier with another version of twrp.
Install TWRP 3.5.2
(2) fastboot flash recovery twrp-3.5.2_9-0-ali.img
(3) Use twrp to install Magisk
adb push Magisk-v23-0.zip /tmp
Boot phone into recovery and use twrp to install Magisk
(4) Boot the phone into System and verify Magisk is there and use Root Checker App to confirm I am now rooted.
Issues:
I noticed that a security update for
PPS29-118-15-11-5 failed to apply.
The phone boots into recovery mode and asks for the decrypt password. I don't know the password to decrypt data and how to proceed from here.
I suspect that if I flash the stock recovery img the security update might work. If anyone knows please comment ; I will research this also and maybe just try it.
Click to expand...
Click to collapse
I am stuck in a similar position.
SOLVED IT!!! Followed all of the steps that you posted except I installed Magisk with the patch method because I couldn't get the zip file to push onto the device. Kept getting a read only error, maybe because it wasn't rooted?
Anyway, I am rooted now!!!

Categories

Resources