Help! I can´t unlock the Bootloader on my P9 - Huawei P9 Questions & Answers

Hi, how are you guys?
Well, as the title says, i can not unlock the bootloader. I follow all steps to do it. I tried with SRK Tool, but after puting the bootloader code, it stays on "Waiting for device".
I have already installed Hisuite and the drivers on my pc. Hisuite do not recognise my cellphone as "connected". It always says "click to connect" or similar.
I have enabled the "developer options", but the "OEM unlock" do not appears.
Can anyone help me please?? I dont know what to do.
Thank you

Yeah this drove me fkn crazy also.
SRKTool works for everything else for me but not to unlock bootloader.
Try this (using 'Minimal ADB and Fastboot' instead of 'SKRTool') and worked for me following the instructions:
http://ministryofsolutions.com/2016/04/official-huawei-bootloader-unlock-tool.html
Also once you have
- unlocked bootloader (as above)
- installed twrp (with SRKTool)
- rooted (with SRKTool)
When rooting, it works but says could not mount data.
Same problem when I try to do a backup in TWRP
Found the reason to be because it is encrypted. Then if you change the format (as one video suggested), you won't be able to turn on your phone and will make you want to kill yourself.

pwoita said:
Yeah this drove me fkn crazy also.
SRKTool works for everything else for me but not to unlock bootloader.
Try this (using 'Minimal ADB and Fastboot' instead of 'SKRTool') and worked for me following the instructions:
http://ministryofsolutions.com/2016/04/official-huawei-bootloader-unlock-tool.html
Also once you have
- unlocked bootloader (as above)
- installed twrp (with SRKTool)
- rooted (with SRKTool)
When rooting, it works but says could not mount data.
Same problem when I try to do a backup in TWRP
Found the reason to be because it is encrypted. Then if you change the format (as one video suggested), you won't be able to turn on your phone and will make you want to kill yourself.
Click to expand...
Click to collapse
Didn´t work . It says "FAILED (remote: Command not allowed)
finished. total time: 0.016s "
Any idea?
Thank you for your answer

Related

Unlocking the bootloader, etc.

I'm stuck.
My phone boots to the welcome screen all the way to the wifi selection but stops after that saying the setup wizard cannot launch. So I cannot go into phone settings to "enable OEM unlocking" to follow the official HTC procedure for the bootloader unlock (which was once unlocked but is now relocked).
I looks like I have no recovery, because I cannot boot into recovery, it just fails.
If I go to (what I thought was) Download/Fastboot mode and try to Fastboot flash twrp for example, it says: FAILED (remote: cannot flash this partition in s-on state) ----> but I then read that this was because I was NOT actually in Download Mode.
So I think I managed to get to Download mode and tried the Fastboot command to flash TWRP again and now it says: FAILED (remote: 9: SD_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCK).
I suppose it means that my Bootloader isnt unlocked...but as mention initially, I cannot access the OS and enable the OEM unlocking toggle.
Since Fastboot isnt working, I dont know if an RUU would work.... And look like I will never know because everytime I launche the EXE file, it extracts, asks me to to accept the conditions, then nothing happens...
Please help!!
maximepull said:
I'm stuck.
My phone boots to the welcome screen all the way to the wifi selection but stops after that saying the setup wizard cannot launch. So I cannot go into phone settings to "enable OEM unlocking" to follow the official HTC procedure for the bootloader unlock (which was once unlocked but is now relocked).
I looks like I have no recovery, because I cannot boot into recovery, it just fails.
If I go to (what I thought was) Download/Fastboot mode and try to Fastboot flash twrp for example, it says: FAILED (remote: cannot flash this partition in s-on state) ----> but I then read that this was because I was NOT actually in Download Mode.
So I think I managed to get to Download mode and tried the Fastboot command to flash TWRP again and now it says: FAILED (remote: 9: SD_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCK).
I suppose it means that my Bootloader isnt unlocked...but as mention initially, I cannot access the OS and enable the OEM unlocking toggle.
Since Fastboot isnt working, I dont know if an RUU would work.... And look like I will never know because everytime I launche the EXE file, it extracts, asks me to to accept the conditions, then nothing happens...
Please help!!
Click to expand...
Click to collapse
I am replying to myself. After trying several things on the phone, I went back to the OS's setup wizard. The second step (2 steps before the crash), has some text and one has a clickable link saying "learn more". It actually opens some phone settings, and from there, you can access all of the phone settings. So I was able to activate Dev mode, OEM unlock and debugging without going through the Wizard!!
Followed the BL unlock procedures on HTC website and as soon as it was unlocked, phone rebooted and TWRP reappeared! I'm saved!!
Thought I would share my discovery in case this ever happens to you too.
I also discovered another possible course of action. When accessing the same "link" to get to settings, go to the network settings and put the phone on Airplane mode. Go back to the setup wizard and skip the connection to wifi. I think it will skip the part of the Setup that made the OS crash.

Question about

Hi everybody, I have a little question regarding my P10.
The model of my phone is VTR-L09C521B101
Is there a way to flash this phone with VTR-L09C432 version?
or i need to flash with same model version (VTR-L09C521)?
Thnks
Yes, it is possible to 'rebrand'. The procedure is explained in the Mate 9 forum. It is not so easy and involves unlocking the bootloader.
Updating can be done with the Firmware Finder (Playstore).
M1chiel said:
Yes, it is possible to 'rebrand'. The procedure is explained in the Mate 9 forum. It is not so easy and involves unlocking the bootloader.
Updating can be done with the Firmware Finder (Playstore).
Click to expand...
Click to collapse
thanks for the answer!!
regarding bootloader, the phone shows this:
PHONE RELOCKED
FRP LOCK
ADB shows me that the phone is unlocked, the problem is when I try to send something to phone it shows:
Error Remote command not allowed.
any ideas?
thanks!
I've tried to reword the mate 9 instructions for the p10 here: https://forum.xda-developers.com/p10/help/rebrand-firmware-finder-t3685951
As for adb, what command are you trying? Do you see your phone if you type ADB Devices?
Quintman said:
I've tried to reword the mate 9 instructions for the p10 here: https://forum.xda-developers.com/p10/help/rebrand-firmware-finder-t3685951
As for adb, what command are you trying? Do you see your phone if you type ADB Devices?
Click to expand...
Click to collapse
Quintman, no the phone is not listed with adb devices command. I can only enter with fastboot.
Let me paste the commands that I have tried:
C:\adb>fastboot devices
WPG7N17320000978 fastboot
C:\adb>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.001s]
finished. total time: 0.001s
C:\adb>fastbot oem lock <my_unlock_code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot oem unlock <my_unlock_code>
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
C:\adb>fastboot oem relock <my_unlock_code>
...
FAILED (remote: stat not match)
finished. total time: 0.016s
The Strange thing is that in the phone shows PHONE RELOCKED, not unlocked as ADB shows.
Since I uploaded boot img of another version (C432) full OTA, could this be the problem? in this case what can I do?
thanks for your help!!
Could this be happening because of FRP Lock?, none of the software I have tried (DC-phoenix, chimera and Unlocker v2) worked. Im this close to throw this f*ckin phone to trash u.u
fmm1977 said:
Could this be happening because of FRP Lock?, none of the software I have tried (DC-phoenix, chimera and Unlocker v2) worked. Im this close to throw this f*ckin phone to trash u.u
Click to expand...
Click to collapse
edit: just found this in another thread "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options"
Hmm, i've just checked my phone and in fastboot it says PHONE Locked, and FRP Unlock. I think that may be your issue. What exactly did you do to flash your phone with the other version? put an UPDATE.APP into a \Dload folder and 3 button update?
is your phone booting (guessing not). my guess is that you need to get a hold of your stock firmware file an flash that first.
Quintman said:
edit: just found this in another thread "FRP Lock occurs when the phone has a firmware mismatch and or oem unlocking is not on in developer options"
Hmm, i've just checked my phone and in fastboot it says PHONE Locked, and FRP Unlock. I think that may be your issue. What exactly did you do to flash your phone with the other version? put an UPDATE.APP into a \Dload folder and 3 button update?
is your phone booting (guessing not). my guess is that you need to get a hold of your stock firmware file an flash that first.
Click to expand...
Click to collapse
Ok, this is what I've done step by step:
1.- With the unlock code provided by huawei, I have unlocked my phone (my version is VTR-L09C521B101 stock)
2.- Once unlocked, I have downloaded another ROM version (VTR-L29C605B151) in the web page says this rom is for latin america), so with the Huawei Update Extractor, I have extracted all files.
3.- Via ADB/FASTBOOT, I sent the files to my phone, boot.img first and then the others. (big big mistake!)
4.- Rebooted the phone, and then keeps restarting at huawei logo.
5.- Seeing that it did´t worked, what I did was to lock the phone again thinking to send it to Huawei (at this point the phone shows as "unlocked" via fastboot commands, however when I start the phone in fastboot mode, in the screen shows "PHONE RELOCKED, FRP LOCK"
6.- Sent to huawei's service, they said that they cannot fix my phone because it was tampered/rooted.
7.- Right now all I need to fix my phone is to LOCK/UNLOCK again in order to rebrand it to L29 version, since the original stock rom dont exist (not as FULL OTA).
And that´s what I did so far my friend.
Questions:
1.- Is there a way to connect to my phone and change the oem info file? or something?
2.- Do I need to wait the stock rom to be released in order to reflash via Dload method?
3.- What if the stock ROM version of my phone is never released?
thank you for your answer my friend!!
Hmm ok. I am just not sure on your step 3, I've never heard of a method that involves a boot.img... what I would suggest, is to try and download the stock firmware files (need the larger full ota files), extract the update.app file and put on sd card in \dload.
Then hold down both volume up and down and power (3 button method)
It will try and flash the stock image back to the phone.
I just tried the Dload method and nothing happened (always stuck in 5%), now im going to try to use a smaller memory card (mine is 64 Gb). lood
U have disconnected the USB cable when u try 3 button update
berka38 said:
U have disconnected the USB cable when u try 3 button update
Click to expand...
Click to collapse
Yes sr!!

Messed up via oem lock command - can't access recovery - any help appreciated!

Hi all,
A few days ago I installed a custom ROM, which broke my android pay. I tried to re-lock the bootloader to fix this via the fastboot oem lock command, and i'm now stuck in a bootloop.
I can get the phone to boot into fastboot mode, and it shows up as such when checking via command prompt. I also have a backup of the phone I made a few days ago. I've tried to unlock the phone using the fastboot oem unlock command, but get the following error:
FAILED (remote: Token verification failed, reboot the device)
finished. total time: 0.008s
I bought the phone second hand with an unlocked bootloader, if that makes a difference? I've set up a new Mi account and applied for an unlock code.
Does anyone have any tips on how to proceed? Thanks in advance!
Stupid thing to think relocking your bootloader would fix android pay while still on that custom rom, whe have hacks for that you know >> magisk14/15.2
Do you still have twrp? also try to flash stock images from xiaomi themselves, here.
that should at least get you booting again.
Hi,
Thanks for replying, i'll download the global stable version. Is it a case of sideloading this once complete? I still have TWRP installed if it makes a difference, I just can't reach it :/
Yes I do feel pretty stupid, and thanks for the link to magisk - hadn't heard of it until now but i'll definitely be using when/if I get my Mi back up and running. Is there anyway to unlock the bootloader other than the Mi Unlock app?
Thanks!
EDIT: Okay, so i tried flashing via the MiFlash tool and got the following error:
FAILED: Remote device is locked. Cannot erase.
Any idea of where to go from here?
So, I fixed it! In the off chance anyone is as unlucky/stupid/trigger happy as me, and finds themselves in teh same situation, here's the solution:
If you can't get it into EDL mode because you can't switch it off (mine kept rebooting), follow this video:
https://www.youtube.com/watch?v=ED96PJ-qYMM
It's in a foreign language but is clear enough - take the back off, unscrew the cover and short the pins he shows you after disconnecting the battery, then plug into your computer.
Your phone will pop up as a Qualcommdevice under the ports section of Device Manager. You should then be able to flash via MiFlash as per usual.
Phew, hairy there but sorted in the end. I'll now wait for the unlock code from Xiaomi, and do a bit more reading in future!
A much easier way to solve this problem
You don't have to follow any long tutorial. Nor do you have to open your phone up. Just power it into fastboot mode, download the mi unlock tool that you used the first time to unlock your bootloader and unlock your device once again. Then you can use miflash to flash the fastboot rom on your device and it won't throw up any errors. Once that's done, just reflash the custom recovery. Install the custom rom, use magisk for root and you're good to go. Safety net won't be tripped and android pay will still work. No need to rip your phone apart to fix it.

Semi working PRA-LX1C432

Hi !
I bought in January the nice P8 Lite 2017 and received a PRA-LX1C432 (dual sim europe no carrier).
It was with Android 7.0 and EMUI 5.0 and i wanted to root it.
I did it well, and was with the firmware PRA-LXA1C432B182 in stock and rooted with the tuto from this thread
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
and uninstalled TWRP to put back stock recovery.
Later, I wanted to unroot my phone, and that's where things went wrong. I tried to do it with the superSU option and after a hard reset it was working and not rooted, but i'd still have the message "this phone can't be trust" so i tried to relock the bootloader and it did hard reset the phone again and now, i'm stuck with a phone that can send sms or go through the internet with LTE, but can't access fm, camera, google music, nfc is going on and off, calls don't work, etc... In dev options, Allow OEM unlock is greyed and I can't change anything. Phone is recognized by computer and I can acces memory of the phone.
I can hard reset it won't change, i ca also accessFastboot, or recovery or eRecovery, but in Fastboot mode it says "PHONE Unlock FRP Lock" and from my computer i can't do anything : if i try to flash twrp with fastboot command, i have the message "FAILED remote the command is not allowed", if i try to lock/unlock/relock bootloader it says "FAILED remote root type is risk".
Clearly, I don't know what to do. I'm used with rooting/unrooting smartphones from different brands (Samsung, LG, Sony, Huawei...), even though i'm far from being a master, and using Fastboot/ADB commands, but... I don't know.
If someone has any idea, I'm taking. I'm thinking about dload method but, of cooourse, I do NOT have a sdcard, so it's the last thing i would have tried from all i have seen on xda and elsewhere.
Thanks for reading and taking time to answer and help me, and sorry for not perfect english, i'm french but trying my best !
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Fr0nK said:
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Click to expand...
Click to collapse
I can't, it says that it can not get package infos from server. :/
MrCrumble34 said:
I can't, it says that it can not get package infos from server. :/
Click to expand...
Click to collapse
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Fr0nK said:
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Click to expand...
Click to collapse
TWRP is not installed, and I can't flash it in any way. Fastboot says "FAILED (remote : command not allowed)" if I try flashing recovery or system or anything. It also says "FAILED (remote : root type is risk) if I try to lock/unlock/relock the bootloader.
Ok, I'm actually trying something. I plugged the phone into my computer, and HiSuite told there was an update available for my phone, so I just clicked on it. It's doing right now, I will edit my post after it has finished (for good or bad).
EDIT : Ok, si it did work ! My phone is now on PRA-LX1C432B194, everything is working, not rooted. I relocked the bootloader with Fastboot, the command did work (guess I can root it again if I need now). But I think I'll leave it like that ^^'
Allow OEM unlock isn't greyed anymore, I came back to the original state of my phone but with an update not (yet) available in my country, no more "Device can't be trusted" message. Like if nothing had ever happened (expect it will be written PHONE Relocked).
This phone is really sensitive, haha^^
But as anyway I made it
Thanks anyway for trying to help !

XZ3 unlock bootloader [Failed: Command did not succeed] someone resolved?

has anyone solved this problem by unlocking the bootloader? with error: Failed: Command did not succeed
I tried the following bulds:
52.0.A.3.202
52.0.A.8.14
52.0.A.8.25
52.0.A.8.50
Thanks
Bibi
small update:
after updating to 52.0.A.8.50, I made "factory settings" to reset it to the old version.
But when I restart without wifi, I find build 52.0.A.8.50 again
And now the OEM unlock option, which was usable before, has turned gray !! Mystery for me.
Obviously he wants me to update to 52.0.A.8.85 !!!
SOLVED INFORMATION:
I was wrong in writing IMEI of my device, and I put a wrong IMEI in SONY's selector, on its official page, which happens to have given its unlock code all quiet.
then the problem FAILED (remote: 'Command did not succeed')
can be translated as "I don't have the exact unlock code for your phone"
I did this to version 52.0.A.8.131 that I had installed before.
bibibabi said:
has anyone solved this problem by unlocking the bootloader? with error: Failed: Command did not succeed
I tried the following bulds:
52.0.A.3.202
52.0.A.8.14
52.0.A.8.25
52.0.A.8.50
Thanks
Bibi
Click to expand...
Click to collapse
Try .131 vor wait for September
For wait for Q, maybe Sony will remove more DRM TA protection like it did with P
if it was for 2 or 3 days it is not a problem.
but I can't wait until late September.
Let's say that I bought it to be root .. and if I can't do it .. maybe I'll send it back.
Sorry, but are you telling me that they haven't solved even after almost a year?
nobody rooted?
The 3.131 where I can find it and flash arla.
if I find it on XFIRM, what program do I use to put it in my phone?
among other things to set it to factory settings he left me at 52.0.A.8.50, even without wifi.
And nice surprise .. OEM unlock is now deactivated !!!!
it leaves me very mulble
bibibabi said:
if it was for 2 or 3 days it is not a problem.
but I can't wait until late September.
Let's say that I bought it to be root .. and if I can't do it .. maybe I'll send it back.
Sorry, but are you telling me that they haven't solved even after almost a year?
nobody rooted?
The 3.131 where I can find it and flash arla.
if I find it on XFIRM, what program do I use to put it in my phone?
among other things to set it to factory settings he left me at 52.0.A.8.50, even without wifi.
And nice surprise .. OEM unlock is now deactivated !!!!
it leaves me very mulble
Click to expand...
Click to collapse
OEM unlock needs internet via a simcard and a phone restart
There ate many unlocked users using magisk and twrp.
I would recommend to follow the Sony unlocking instructions
MartinX3 said:
OEM unlock needs internet via a simcard and a phone restart
There ate many unlocked users using magisk and twrp.
I would recommend to follow the Sony unlocking instructions
Click to expand...
Click to collapse
Then:
if I do a factory reboot and I don't put the wifi in the first cellphone settings, the OEM unlock option remains gray.
If I do it and I put the wifi in the meantime that is imposed then OEM unlock is usable and therefore can be activated. Correct?
(not that it makes much sense)
However I am installing updates one after the other, and for every update I try the command. (what's also coming to 52.0.A.8.131 which has been expanding in August 2019 (practically these days) and text as MartinX3 advised.
bibibabi said:
Then:
if I do a factory reboot and I don't put the wifi in the first cellphone settings, the OEM unlock option remains gray.
If I do it and I put the wifi in the meantime that is imposed then OEM unlock is usable and therefore can be activated. Correct?
(not that it makes much sense)
However I am installing updates one after the other, and for every update I try the command. (what's also coming to 52.0.A.8.131 which has been expanding in August 2019 (practically these days) and text as MartinX3 advised.
Click to expand...
Click to collapse
It's forced by the mobile providers to check if the simcard allows unlocking
Sony isn't alone here
Unlocking factory resets the phone, too
I did check the unlock box and followed only the Sony instructions and used my generated IMEI code.
MartinX3 said:
It's forced by the mobile providers to check if the simcard allows unlocking
Sony isn't alone here
Unlocking factory resets the phone, too
I did check the unlock box and followed only the Sony instructions and used my generated IMEI code.
Click to expand...
Click to collapse
wait MartinX3,
aren't you saying that you need a simcard inserted in the cell to unlock it right? just the wifi I hope to activate the option.
Look, I followed Sony's directions (which are basically 4 things on the cross)
But it gives me that error: FAILED (remote: 'Command did not succeed')
LIST OF WHAT I DID:
-I do All the appropriate procedures:
-I received the unlock code from the official Sony site
- Platform-tool download and driver
-on the phone sets it basic, active developer commands
- USB DEBUG and UNLOCK OEM tip on the mobile phone menu
- I turn off the phone
-Attack the mobile in fastboot mode (blue light)
-then in the devices and printers, which appears in new one when I plug in the cel in fastboot mode, I update the driver of the device appeared, android studio).
-I do the ADB command -> fastboot devices
**and ai read the model serial
- Then enter the code to unlock the phone: fastboot oem unlock 0xCODESEIAL
**and I get this: FAILED (remote: 'Command did not succeed')
----------------------------------------------------------------------------
(I tried the .107, now I try with .131 as you recommended me)
UPDATE:
badly wrong, even with the 52.0.A.8.131 DOES NOT, same identical error.
Sony in his guide makes it so easy, but neither does he make the possible mistakes.
And that I can't find an explanation for this specific error.
bibibabi said:
wait MartinX3,
aren't you saying that you need a simcard inserted in the cell to unlock it right? just the wifi I hope to activate the option.
Look, I followed Sony's directions (which are basically 4 things on the cross)
But it gives me that error: FAILED (remote: 'Command did not succeed')
LIST OF WHAT I DID:
-I do All the appropriate procedures:
-I received the unlock code from the official Sony site
- Platform-tool download and driver
-on the phone sets it basic, active developer commands
- USB DEBUG and UNLOCK OEM tip on the mobile phone menu
- I turn off the phone
-Attack the mobile in fastboot mode (blue light)
-then in the devices and printers, which appears in new one when I plug in the cel in fastboot mode, I update the driver of the device appeared, android studio).
-I do the ADB command -> fastboot devices
**and ai read the model serial
- Then enter the code to unlock the phone: fastboot oem unlock 0xCODESEIAL
**and I get this: FAILED (remote: 'Command did not succeed')
----------------------------------------------------------------------------
(I tried the .107, now I try with .131 as you recommended me)
UPDATE:
badly wrong, even with the 52.0.A.8.131 DOES NOT, same identical error.
Sony in his guide makes it so easy, but neither does he make the possible mistakes.
And that I can't find an explanation for this specific error.
Click to expand...
Click to collapse
Sadly I'm out of ideas
Hoping here or at https://talk.sonymobile.com/t5/Xper...er-Failed-Command-did-not-succeed/m-p/1387453 someone will answer you
MartinX3 said:
Sadly I'm out of ideas
Hoping here or at https://talk.sonymobile.com/t5/Xper...er-Failed-Command-did-not-succeed/m-p/1387453 someone will answer you
Click to expand...
Click to collapse
I found out!
then:
turn and turn, and check IMEI of the cell I used.
I was wrong in writing IMEI, and I put the wrong IMEI in SONY's selector, on its official page, which happens to have given its unlock code all quiet.
then the problem FAILED (remote: 'Command did not succeed')
can be translated as "I don't have the exact unlock code for your phone"
I did this to version 52.0.A.8.131 that I had installed before.
well OTHER PROBLEM!
it doesn't flash me twrp
with this error:
Sending 'recovery' (34192 KB) OKAY [0.737s]
Writing 'recovery' FAILED (remote: 'No such partition.')
I'm looking at guides.
bibibabi said:
I found out!
then:
turn and turn, and check IMEI of the cell I used.
I was wrong in writing IMEI, and I put the wrong IMEI in SONY's selector, on its official page, which happens to have given its unlock code all quiet.
then the problem FAILED (remote: 'Command did not succeed')
can be translated as "I don't have the exact unlock code for your phone"
I did this to version 52.0.A.8.131 that I had installed before.
well OTHER PROBLEM!
it doesn't flash me twrp
with this error:
Sending 'recovery' (34192 KB) OKAY [0.737s]
Writing 'recovery' FAILED (remote: 'No such partition.')
I'm looking at guides.
Click to expand...
Click to collapse
Nice that it worked
Oh, the error is easy
It indicates "you didn't read the instructions' [emoji14]
MartinX3 said:
Nice that it worked
Oh, the error is easy
It indicates "you didn't read the instructions' [emoji14]
Click to expand...
Click to collapse
No means I'm blind as a mole, for a number
But now, following the instructions of the root of the zx3 H8416, they don't work
bibibabi said:
No means I'm blind as a mole, for a number
But now, following the instructions of the root of the zx3 H8416, they don't work
Click to expand...
Click to collapse
"Fastboot flash recovery twrp.IMG" aren't definitely the instructions dear blind mole
MartinX3 said:
"Fastboot flash recovery twrp.IMG" aren't definitely the instructions dear blind mole
Click to expand...
Click to collapse
Leave me pending? this is the command they say they use.
HTML:
fastboot flash recovery twrp.img
I know you can flash even with androxyed flash, but when you do ... it doesn't start anymore (the white sony script remained) ...
and I went a bit panicked !!!!
doing the Flash of the original firware it has been restored, but returned to the point of before. Install twrp.twp or superSU in short, activate the ROOT
the writing that says that the bootloader is corrupt, at start each time the cell terrifies me every time I see it. BRRRR
bibibabi said:
Leave me pending? this is the command they say they use.
HTML:
fastboot flash recovery twrp.img
I know you can flash even with androxyed flash, but when you do ... it doesn't start anymore (the white sony script remained) ...
and I went a bit panicked !!!!
doing the Flash of the original firware it has been restored, but returned to the point of before. Install twrp.twp or superSU in short, activate the ROOT
the writing that says that the bootloader is corrupt, at start each time the cell terrifies me every time I see it. BRRRR
Click to expand...
Click to collapse
If you corrupted the firmware, please use xperifirm & newflasher from XDA to reflash the firmware
Instructions are in the ROM section of the xz3 on XDA
MartinX3 said:
If you corrupted the firmware, please use xperifirm & newflasher from XDA to reflash the firmware
Instructions are in the ROM section of the xz3 on XDA
Click to expand...
Click to collapse
yes yes, I know that with the flash mode they can reinstall the official system.
there is also the official sony flastool called EMMA. which I have to say is not bad.
Now the system is ok, official.
I'm looking for ways to install root or twrp from a phone
bibibabi said:
yes yes, I know that with the flash mode they can reinstall the official system.
there is also the official sony flastool called EMMA. which I have to say is not bad.
Now the system is ok, official.
I'm looking for ways to install root or twrp from a phone
Click to expand...
Click to collapse
Should be impossible without a computer for initial installation
MartinX3 said:
Should be impossible without a computer for initial installation
Click to expand...
Click to collapse
yes, it's like you say.
Looking at the guides, I think the right solution for me is an official firmware kernel that has both twrp and magikic inside.
I found a guide of 2017, but the official firmware files have changed, I do not find myself in the guide.
Can't you recommend something to me, or the keywords to look for on this theme?
I wanted to learn to change the firmware for future root myself.
bibibabi said:
yes, it's like you say.
Looking at the guides, I think the right solution for me is an official firmware kernel that has both twrp and magikic inside.
I found a guide of 2017, but the official firmware files have changed, I do not find myself in the guide.
Can't you recommend something to me, or the keywords to look for on this theme?
I wanted to learn to change the firmware for future root myself.
Click to expand...
Click to collapse
I have sadly no time to do it and can only recommend the ROM section for the XZ3 in XDA (twrp)
MartinX3 said:
I have sadly no time to do it and can only recommend the ROM section for the XZ3 in XDA (twrp)
Click to expand...
Click to collapse
Each has its own spaces. do not worry. Meanwhile, I've made progress !!!
You know that after unblock I had problems installing TWRP.Practically the command gave error.
I found the solution around.
The guides say:
HTML:
fastboot flash recovery twrp.img
but I have this error:
HTML:
FAILED (remote: 'No such partition.')
basically in the version of android 9 they created 2 partitions and practically the recovery was divided into recovery ramdisck, recovery ...
They explain it HERE
In practice some new systems (I did not understand if the kelner or just the boot), do not have the active recovery partition and then flash the recovery, it is like doing it on a folder that does not exist.
So they recommend starting the mini twrp operating system via adb.
And through this active twrp (but not installed), install twrp itself, and then the apps for the root.
So, I use the new command that starts twrp without installing it:
HTML:
fastboot boot twrp.img
then it takes 3 minutes with the word sony and then I see twrp
I make a twrp backup for security
then from there I install .img used for the command and moved to the phone while twrp is active and I do install, install img and select partition recovery ramdisck.
I tried to install also in the boot partition, which shows in the list.
and apparently the cell works correctly anyway.
In the guides they never say in which partition to put.
Meanwhile there are install magisk 18.1 (and a zip called permissive; I don't know what it is but from the name it seems useful).
Well, everything is smooth and without errors.
Restart, I use the twrp access commands (which in the case of xz3 are volume DOWN + prower simultaneously while the phone is still off).
And the recovery is there, but it has the usual tuoch problem that doesn't work.
I see the twrp main screen, which seems to work correctly, but the touch ...
I then checked the root, via the app downloadable on the cell from the magisk manager repository and marks the correct root.
Obviously I don't update anything about 19.3, which you wrote in other places that is corrupt.
: Sciocco: NOW! I just have to fix twrp and my epic quest will be over.
(although I'm worried about flashing a hypothetical Q that's coming out)
can you give me some inspiration for the touch that doesn't work twrp?
bibibabi said:
Each has its own spaces. do not worry. Meanwhile, I've made progress !!!
You know that after unblock I had problems installing TWRP.Practically the command gave error.
I found the solution around.
The guides say:
HTML:
fastboot flash recovery twrp.img
but I have this error:
HTML:
FAILED (remote: 'No such partition.')
basically in the version of android 9 they created 2 partitions and practically the recovery was divided into recovery ramdisck, recovery ...
They explain it HERE
In practice some new systems (I did not understand if the kelner or just the boot), do not have the active recovery partition and then flash the recovery, it is like doing it on a folder that does not exist.
So they recommend starting the mini twrp operating system via adb.
And through this active twrp (but not installed), install twrp itself, and then the apps for the root.
So, I use the new command that starts twrp without installing it:
HTML:
fastboot boot twrp.img
then it takes 3 minutes with the word sony and then I see twrp
I make a twrp backup for security
then from there I install .img used for the command and moved to the phone while twrp is active and I do install, install img and select partition recovery ramdisck.
I tried to install also in the boot partition, which shows in the list.
and apparently the cell works correctly anyway.
In the guides they never say in which partition to put.
Meanwhile there are install magisk 18.1 (and a zip called permissive; I don't know what it is but from the name it seems useful).
Well, everything is smooth and without errors.
Restart, I use the twrp access commands (which in the case of xz3 are volume DOWN + prower simultaneously while the phone is still off).
And the recovery is there, but it has the usual tuoch problem that doesn't work.
I see the twrp main screen, which seems to work correctly, but the touch ...
I then checked the root, via the app downloadable on the cell from the magisk manager repository and marks the correct root.
Obviously I don't update anything about 19.3, which you wrote in other places that is corrupt.
: Sciocco: NOW! I just have to fix twrp and my epic quest will be over.
(although I'm worried about flashing a hypothetical Q that's coming out)
can you give me some inspiration for the touch that doesn't work twrp?
Click to expand...
Click to collapse
Please use the August .131 firmware and my matching stock twrp

Categories

Resources