EVA-L09 Bricked, please help. - Huawei P9 Questions & Answers

Hello all
I have a problem with my Huawei P9 (Eva L09). During my dload update my smartphone shutdown without any advice. So update process has been completed therefore device does boot and stucked in Huawei logo and jumped to Huawei erecovery. Recocery mode does works but i cannot re flash a new firmware. Fastboot mode works. I re flash system.img boot.img and so on as a thread in this forum says but nothing to do. Device does not work. Hisuite can restote all in fastboot mode but seems that my device is not compatible. It is last version of hisuite. My bootloader and FRP mode locked. Someone can help me?
Thanks in advance
Update: My phone now just only go to fastboot mode and can not boot up to recovery mode now, always boot to logo screenand stuck, please help! Thanks

Flash rom from dload from sd card. After flash when system not start go back to recovery and wipe data and factory reset. Turn on again. When system not work flash again from dload. Use 3 button to turn on phone
<<<by scaniathe>>>

scaniathe said:
Flash rom from dload from sd card. After flash when system not start go back to recovery and wipe data and factory reset. Turn on again. When system not work flash again from dload. Use 3 button to turn on phone
<<<by scaniathe>>>
Click to expand...
Click to collapse
but when I started flash until 5%, it said firmware failed to install and just gave me the option was"reboot system now" and reboot back to erecovery, so annoying.....:crying:

different firmware??
probably wrong type of firmware...
there are several types of firmware for L09 two in particular I messed around... since I was in your shoe too...
one was B136 and the other was i think B165
try installing another firmware

C432b182 latest from huawei.customer.com
<<<by scaniathe>>>

sk0n3 said:
probably wrong type of firmware...
there are several types of firmware for L09 two in particular I messed around... since I was in your shoe too...
one was B136 and the other was i think B165
try installing another firmware
Click to expand...
Click to collapse
which firmware should I flash for the phone? C432B136?

scaniathe said:
C432b182 latest from huawei.customer.com
<<<by scaniathe>>>
Click to expand...
Click to collapse
I tried, but it was still said "install firmware fail".......

scaniathe said:
C432b182 latest from huawei.customer.com
<<<by scaniathe>>>
Click to expand...
Click to collapse
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
sk0n3 said:
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
/\ /\ /\ /\ /\ /\ /\ /\
this guy works with one click its pretty cool

Stock recovery install automatically with reinstall firmware from dload. Format your all data from twrp and reinstall again
<<<by scaniathe>>>

scaniathe said:
Stock recovery install automatically with reinstall firmware from dload. Format your all data from twrp and reinstall again
<<<by scaniathe>>>
Click to expand...
Click to collapse
when i did mine i downloaded the ROOT-HUAWEI-P9.zip/extract then used part 1 to install twrp from bootloader
then boot to recovery wipe data cache system
go back to the extracted zip file and use part 3 to reinstall stock recovery
then check to see if you have dload folder with UPDATE.APP in your main directory o your sd card
then turn your phone off hold vol up and down and pwr/ after first vibration release pwr button
---------- Post added at 08:31 AM ---------- Previous post was at 08:30 AM ----------
sk0n3 said:
when i did mine i downloaded the ROOT-HUAWEI-P9.zip/extract then used part 1 to install twrp from bootloader
then boot to recovery wipe data cache system
go back to the extracted zip file and use part 3 to reinstall stock recovery
then check to see if you have dload folder with UPDATE.APP in your main directory o your sd card
then turn your phone off hold vol up and down and pwr/ after first vibration release pwr button
Click to expand...
Click to collapse
if the update stops at 5% change firmware to B136 and try

sk0n3 said:
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
http://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
/\ /\ /\ /\ /\ /\ /\ /\
this guy works with one click its pretty cool
Click to expand...
Click to collapse
but my bootloader and FRP are locked now, can use the other methods to fix it? thanks

It's been suggested a couple of times already... Flash C432B136.
Sent from my EVA-L09 using Tapatalk

elspinat said:
It's been suggested a couple of times already... Flash C432B136.
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
now I want to turn off my phone, but can't turn it off and always boot to huawei logo screen how can I turn it off, please? thanks:crying:

You must connect to pc install adb and fastboot or srk tool and try fixed from pc
<<<by scaniathe>>>

scaniathe said:
You must connect to pc install adb and fastboot or srk tool and try fixed from pc
<<<by scaniathe>>>
Click to expand...
Click to collapse
I installed already, but the main point is, the bootloader and FRP mode are locked, if I used srk tool that must be unlock bootloader first...I'm so annoying...please help!

You unlock botloader fixed phone and lock again
<<<by scaniathe>>>

FRP mode is factory reset protection you know that right?

benjamen50 said:
FRP mode is factory reset protection you know that right?
Click to expand...
Click to collapse
I think it is....do you know how to fix it?? you can chat with me in PM....Thanks

scaniathe said:
You unlock botloader fixed phone and lock again
<<<by scaniathe>>>
Click to expand...
Click to collapse
the main point is I can boot into bootloader and rescue mode but i can't unlock bootloader....because the device's bootloader looked and also can't not use Hisuite to restore the firmware....so I'm very frustrate now.....:crying:

If I remember correctly even if FRP lock is enabled it should still allow official Huawei Firmware to be flashed onto the phone. It just means that you will need to enter most likely a google username and password (that was used to enable factory reset protection on the device) during the device initial setup wizard screen after the phone boots up for the first time after firmware flash / factory reset.
Though it is weird that you can't do the firmware flash via the system recovery option in hisuite. The device should be able to boot into system recovery mode (fastboot mode) right?
What happens when you try to do it? Does some error message come up?

Related

Fingerprint sensor not working after flashing stock recovery.

Anyone know why fingerprint sensor isn't working after i flash recovery of b145?
Same
I bricked my Mate S so extracted the img files from the stock B145 Europe full file, and flashed:
boot
recovery
system
cache
userdata
I have the same problem, fingerprint sensor doent work, there are no options in settings for the fingerprint sensor.
Also im unable to set any security, and also i cant uninstall any apps as the phone reboots everytime i do..
I did root the phone to see what was going on and the keystore is missing along with a whole bunch of errors.
I know it doesnt help, sorry
Arola1982 said:
I bricked my Mate S so extracted the img files from the stock B145 Europe full file, and flashed:
boot
recovery
system
cache
userdata
I have the same problem, fingerprint sensor doent work, there are no options in settings for the fingerprint sensor.
Also im unable to set any security, and also i cant uninstall any apps as the phone reboots everytime i do..
I did root the phone to see what was going on and the keystore is missing along with a whole bunch of errors.
I know it doesnt help, sorry
Click to expand...
Click to collapse
If you are both talking about flashing those files whilst on B303 or B321 it's just not possible at the moment..you'll need to restore a TWRP backup u made whilst on MM Beta to get security options back.
You just can't get back to 5.1.1 from MM Beta at the moment
Okay so ive tried to manually update. Won't work. Should i try to flash the images of b321 mabye?
Basicly stupid me doesn't have backup :/
Sent from my HUAWEI CRR-L09 using XDA-Developers mobile app
The same happened to me - semi-bricked my phone whilst I was on b321; wanted to root it and it didn't work. Now I'm back on b145 because I have no TWRP backup of b321 (stupid me). So, could anyone make a (clean) TWRP backup of CRR-L09C432B321? That would be awesome!
Thanks in advance - fbs
ask to dcunlocker in the support chat...huaweiphonewriterv4.exe to flash recovery update in fastboot mode and then reflash full firmware with same tool..i have save my device.
frisko76 said:
ask to dcunlocker in the support chat...huaweiphonewriterv4.exe to flash recovery update in fastboot mode and then reflash full firmware with same tool..i have save my device.
Click to expand...
Click to collapse
Well, my phone is not bricked. It's just a really dirty version of b145 (security options and automatic screen brightness and stuff like that is not working). But thanks, I will try it
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S[/QUOTE]
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
---------- Post added at 03:40 PM ---------- Previous post was at 03:34 PM ----------
You not have stock recovery..you have twrp and not is possible flash original firmware....is possible to flash boot.img and recovery.img on the fastboot mode,but if you have frp lock this is not possible...only with tool of dcunlocker is possible to install recovery and boot original..after your install full firmware with same tool..
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
Click to expand...
Click to collapse
Hi Frisko76
I have try to contact support DCunlocker chat , but there is nobody to help me today.
Can you send me a link for download huaweiphonewriterv4.exe?
frisko76 said:
edit: where can I find the support chat? Here on XDA? Sorry for this dumb question :S
On web site of dcunlocker in the tab contact live chat..describe your problem in the tecnichal support..
---------- Post added at 03:40 PM ---------- Previous post was at 03:34 PM ----------
You not have stock recovery..you have twrp and not is possible flash original firmware....is possible to flash boot.img and recovery.img on the fastboot mode,but if you have frp lock this is not possible...only with tool of dcunlocker is possible to install recovery and boot original..after your install full firmware with same tool..
Click to expand...
Click to collapse
Thanks for the input, but I guess this is not my problem. I'm able to flash via fastboot and my FRP is unlocked.
I tried flashing the files from all versions - b145, b303 and b321 (eg. system.img, recovery.img, cush.img and such), but I couldn't get b303 or b321 working again. I end everytime in a boot loop.
Maybe I did something wrong, but that's the reason I restored an old b145 twrp backup.
fbsfelony said:
Thanks for the input, but I guess this is not my problem. I'm able to flash via fastboot and my FRP is unlocked.
I tried flashing the files from all versions - b145, b303 and b321 (eg. system.img, recovery.img, cush.img and such), but I couldn't get b303 or b321 working again. I end everytime in a boot loop.
Maybe I did something wrong, but that's the reason I restored an old b145 twrp backup.
Click to expand...
Click to collapse
Have you tried factory reset then putting a full version of B145 in the /dload/ folder and doing a update through the settings..update..local update
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
Check control in device manager of pc..in fastboot mode you have displayed in the samsung android interface driver driver name ADB BOOTLOADER INTERFACE..IS CORRECT DRIVER..in recovery you have driver ANDROID ADB INTERFACE...check the driver correct..is very important for this...not is displayed ANDROID SOONER SINGLE ANDROID INTERFACE..not work correct this driver...check you.
brumgav said:
Have you tried factory reset then putting a full version of B145 in the /dload/ folder and doing a update through the settings..update..local update
Click to expand...
Click to collapse
I tried that, yes. But with no luck; through the settings I can't make a factory reset (it fails after a few seconds), same with the stock recovery. I haven't tried it with TWRP yet, maybe this will work.
And also the method with the dload folder fails - no matter if I do it via the phones settings or when I boot directly into the setup with volume-down and volume-up (where it stops at 90%).
Maybe a full version of b303 or b321 would work, but for now we don't have that yet.
frisko76 said:
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
---------- Post added at 07:29 AM ---------- Previous post was at 07:23 AM ----------
Check control in device manager of pc..in fastboot mode you have displayed in the samsung android interface driver driver name ADB BOOTLOADER INTERFACE..IS CORRECT DRIVER..in recovery you have driver ANDROID ADB INTERFACE...check the driver correct..is very important for this...not is displayed ANDROID SOONER SINGLE ANDROID INTERFACE..not work correct this driver...check you.
Click to expand...
Click to collapse
I guess that's somehow the case - As mentioned above, I already tried to upgrade the firmware with volume-up and volume-down, but it stops at 90%. But I will try it again in the order you said, thanks!
My drivers are all fine, working with them for a while now with a lot of phones and never had problems using fastboot or adb commands (I'm using the ones of the android-sdk) - but you're right, in fastboot it is called "Android Sooner Single ADB Interface". In stock recovery my phone isn't displayed in the device manager of my computer. When I boot up normally with USB-Debugging enabled it is called "Android Adapter ADB Interface".
Honestly I'm a bit concerned about using the said software "huaweiphonewriterv4" - it doesn't seem very
reliable to me
With tool of dcunlocker i have save my device...android sooner single adb interface is not correct driver in fastboot mode...right key mouse in the pc driver device manager,update driver,manually search and toggle compatible driver..list of driver is down of samsung driver..driver correct is adb bootloader interface version with data driver..most recent..accept message of windows driver is not compatible version..install driver..are his the driver correct!!100℅ work...your problem is twrp ..you not have flash right recovery stock..twrp already installed on your device..you must cancel twrp with recovery stock..
---------- Post added at 09:23 AM ---------- Previous post was at 09:14 AM ----------
If twrp start you not have flashedrecovery stock correct....try to flash boot e recovery in fastboot and userdata of the firmware you have in the device before you in bootloop...with correct driver..and after reboot in recovery stock and wipe data factory reset,reboot and try to install firmware in dload..excuse for my english!!
frisko76 said:
With tool of dcunlocker i have save my device...android sooner single adb interface is not correct driver in fastboot mode...right key mouse in the pc driver device manager,update driver,manually search and toggle compatible driver..list of driver is down of samsung driver..driver correct is adb bootloader interface version with data driver..most recent..accept message of windows driver is not compatible version..install driver..are his the driver correct!!100℅ work...your problem is twrp ..you not have flash right recovery stock..twrp already installed on your device..you must cancel twrp with recovery stock..
---------- Post added at 09:23 AM ---------- Previous post was at 09:14 AM ----------
If twrp start you not have flashedrecovery stock correct....try to flash boot e recovery in fastboot and userdata of the firmware you have in the device before you in bootloop...with correct driver..and after reboot in recovery stock and wipe data factory reset,reboot and try to install firmware in dload..excuse for my english!!
Click to expand...
Click to collapse
Ok, I'll try a driver update, thanks
The thing with the recovery - right now I'm on the b145 recovery, but I've tried the b303 and the b321 recovery as well as the TWRP recovery. I just switched between each versions. But I will try the steps you provided, thank you very much!
It's just that I can't make a proper factory reset - it fails after a few seconds, but my phone is then reset. I will try it again with the files (everything I'm able to flash) of the last working firmware - in my case it was b321 before I ****ed up. Again, thanks
You have to access the update menu without a USB cable connected to update via Update file in dload. If you Reboot into Update Mode with a cable connected, your device will go into USB flashmode und will stop at 90%.
Keep pressing vol up + vol down + Power without a cable connected and Release the power button after the Vibration.
frisko76 said:
Yes..after you have flashed the file via fastboot write command fastboot reboot..put the full firmware in the folder of dload of internal sd card....press with usb connect of your pc volume up + power and enter in huawei erecovery..press shutdown....disconnect usb...press volume +,volume- and power and release only power after huawei logo..you enter in the upgrade firmware...if flashing block at 90℅ for several minute flashing not is correct..and you need this tool huaweiphonewriterv4 with usb connect to pc for flashing full firmware without error...you have need after flashing via fastboot recovery and boot the wipe data factory reset...try before with wipe data e factory reset in the recovery ..enter in this mode without usb press volume up + power..
Click to expand...
Click to collapse
If you do it this way, make sure there is no USB Logo in the circle.
yes..is correct..but if you had a b321 before crash you need to download full 321 and extract boot and recovery of 321 with huaweiexctrator tool and flash it in fast boot mode..then upgrade full firmware in recovery..
I have the same issue, i have mate s with tim brand, i change my brand to no brand, i have installed the firmware b114 (first b110) nex b145, and i try to instal mm beta, but installation fail, i try to flash b145 and fingerprint doesn't work. Next i contacted dc forum with live chat, they help me to return at b114, when finished the finger print It has worked well for 15 min and then gave me problems again.
They told me that They do not yet have a solution for people that have upgrate the mate to MM, and must be wait for the official firmware MM for solve that because the beta of MM is not full version
Guys, I did it
I just found a bigger OTA update which allows you to upgrade directly from b145 to b321.
b145 to b321 OTA
I loaded the recovery.img and boot.img of b145 via fastboot on the phone, after that I just put the downloaded zip on my external sd-card in the dload folder, made the update via settings and et voilà, done!
Just quick tested a few things, but everything seems to work.
Defaultuser88 said:
I have the same issue, i have mate s with tim brand, i change my brand to no brand, i have installed the firmware b114 (first b110) nex b145, and i try to instal mm beta, but installation fail, i try to flash b145 and fingerprint doesn't work. Next i contacted dc forum with live chat, they help me to return at b114, when finished the finger print It has worked well for 15 min and then gave me problems again.
They told me that They do not yet have a solution for people that have upgrate the mate to MM, and must be wait for the official firmware MM for solve that because the beta of MM is not full version
Click to expand...
Click to collapse
Maybe you can try to upgrade your phone with the full version of b145, and after that upgrade from b145 to b321.
Thanks everyone!
did you put the complete zip or only update file?
now i'm in b114 but have same feature like multiwindows of next version, i try to flash the full version of 145, first flash recovery and boot but can't install, the phone give me error :/ can't upgrade from b114 to b145

TWRP Backup

Can Anyone Upload A TWRP Backup For PRA-LA1 OR PRA-LX1 ?!
Cause My Device Is Bricked And I Can't Boot Or Use It Anymore !
So,Can Anyone Upload The TWRP Backup As Fast As Possible !?
I Want These From The Backup:-
Boot
Cache
Cust
OEMinfo (if it's PRA-LA1C185B120)
Data
System
Vendor
Product
Version
@haky86
@ChinHon
Can Anyone Of You Make A TWRP Backup For Me,Please ?!
I Need It A.F.A.P !
Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.
ChinHon said:
Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.
Click to expand...
Click to collapse
Thanks For The Help.
I'll Try It And Report Back.
:laugh:
ChinHon said:
Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.
Click to expand...
Click to collapse
It Locked My Bootloader
And Keeps Booting To eRecovery
So, Tomorrow I'll Try To Unlock The Bootloader
And Make Factory Reset From The Stock Recovery
Then Flash The TWRP RECOVERY
Otherwise Thank You
I Think It'll Work After I Do This
Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.
ChinHon said:
Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.
Click to expand...
Click to collapse
I Tried The Update Thing Didn't Work For Me !
But I'll Try And Unlock The Bootloader !
ChinHon said:
Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.
Click to expand...
Click to collapse
But Can You Give Me Your Bootloader Unlock Code ?!
Cause I Can't Obtain Any Information With The Phone Bootlooping To eRecovery !
The code must fit to the IMEI. Get him by DC Unlocker Client.
ChinHon said:
The code must fit to the IMEI. Get him by DC Unlocker Client.
Click to expand...
Click to collapse
I Unlocked The Bootloader
Then My Device Goes To Error Mode And Says
"Update System Again"
Error!
Error NO : Load Failed
Fastboot Doesn't Do Any Thing At All
And When I Reboot It It Goes To Error Mode Again And Again
Flash now a Recovery.
https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179
ChinHon said:
Flash now a Recovery.
https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179
Click to expand...
Click to collapse
I Can't Flash Anything Cause It's In Error Mode!
When I Enter:-
Fastboot Flash Recovery Pargue.img
It Says:-
Waiting For Device
And Doesn't Do Anything At All !
YSFYoussef480 said:
I Can't Flash Anything Cause It's In Error Mode!
When I Enter:-
Fastboot Flash Recovery Pargue.img
It Says:-
Waiting For Device
And Doesn't Do Anything At All !
Click to expand...
Click to collapse
Take another USB cable and/ or another PC USB port. First connect, then restart the Device with key combi in the bootloader.
ChinHon said:
Take another USB cable and/ or another PC USB port. First connect, then restart the Device with key combi in the bootloader.
Click to expand...
Click to collapse
Tried It
Didn't Work
You do not come to the Recovery also any more?
ChinHon said:
You do not come to the Recovery also any more?
Click to expand...
Click to collapse
Yes But I Let The Device To Drain The Battery Then I Flashed The TWRP Recovery And Flashed The Stock Boot Image After I Flash It It Has A Problem It Goes To eRecovery All The Time But When I Flash The Rooted Boot Image It Boots But I Can't Go To DEV Options Or The Security In Settings
Make now the update from the instructions on the B110. Then everything becomes good.
ChinHon said:
Make now the update from the instructions on the B110. Then everything becomes good.
Click to expand...
Click to collapse
Can You Send Me A TWRP Backup Of Your Current Stock Boot Partition ?!
The restore from the TWRP backup seldom succeeds. Better flash by ADB or Rashr Flash tool apk.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
ChinHon said:
The restore from the TWRP backup seldom succeeds. Better flash by ADB or Rashr Flash tool apk.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Click to expand...
Click to collapse
I Meant A TWRP Backup For Your Current Stock Boot Partition !!
Not An Image Because It Doesn't Work At All !!
So, Please Can You Send Me A TWRP Backup Of Your Current Boot Partition !!
Or If You Gave Me The TWRP Backup Of The Whole B110 It Will Be Much Appreciated​ !!
Everything what I can offer is in #2. This is a complete backup without datapartition.

[ROM] Service ROMs

MHA-AL00C00B125 - https://mega.nz/#!1853WCAQ!uuCgvn4a7JXHSmEmlBzdMsOOC9vQFJ3WSuMUQI9NDVM
MHA-AL00C00B115 - https://mega.nz/#!88RmjJjA!gGmuc0gL-_sPHOQ0VAXZgTJ3lXmlRRmBqXIYNEyw9XY
MHA-L29C185B186 - http://androidhost.ru/KR
MHA-L29C636B181 - https://forum.xda-developers.com/mate-9/help/bricked-mate-9-help-t3664727/post73988779
MHA-L29C636B122 -
https://drive.google.com/file/d/0BxUuiDq_FRA_cHlHc3BTWEFOUlU/view?usp=sharing
LON-AL00C00B229 - http://androidhost.ru/KZ
LON-L29C432B225 - http://androidhost.ru/L0
LON-L29C185B225 - http://androidhost.ru/L3
LON-L29C636B225 - http://androidhost.ru/L2
LON-L29C721B186 - http://androidhost.ru/L1
Please, make mirror or copy your region ROM to own archive to avoid situation if main source is not available or deleted.
hw to install
Waleedaligomaa said:
hw to install
Click to expand...
Click to collapse
You extract zip, put contents in external_sd/dload/
then boot using vol up + vol down + power. It's useful if you manage to brick or want to rebrand.
Or want to rollback from Oreo to Nougat.
---------- Post added at 10:54 PM ---------- Previous post was at 10:23 PM ----------
Phew. Thanks to these dload images...
I was going to update to Oreo again to try some stuff to get Magisk running.
I downloaded Oreo Beta from pro-teammt.ru using Linux. Little did I know the update.zip was corrupt (Later I tried downloading multiple times using both browser and wget, different MD5 each time so something is up with my computer).
So I updated like usual using HWOTA. It started installing, I don't know how long it got to, but I was presented with a screen that said PLEASE REDOWNLOAD PACKAGE USING RECOVERY.
So I rebooted. ERROR MODE. Now I'm scared... I googled "Mate 10 release date" just in case, lol.
I rebooted to fastboot mode, thankfully it still worked. I had to unlock bootloader again. Now I tried flashing stock B197 recovery, FAILED: (remote: partition length get error).
I tried the same with boot. Same result.
Then I figured out it probably had the new Oreo partition names for boot and recovery, and thankfully those flashed fine.
So flashed TWRP for Oreo, flashed oeminfo for AL00C00 using dd. Flashed ERECOVERY partitions using dd as well, just in case.
Back to bootloader to unlock again after flashing oeminfo, then flashed back stock recovery_ramdisk.
Then placed dload folder on external sd and booted up using vol up+down+power
Now my Mate 9 is booting up again!
Where L09 ..??
Sent from my MHA-L09 using XDA-Developers Legacy app
ante0 said:
Now my Mate 9 is booting up again!
Click to expand...
Click to collapse
That was some journey to the dark side. Welcome back.
So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432
albertobom said:
So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432
Click to expand...
Click to collapse
You need to rebrand to AL00C00 to rollback.
In other words, flash AL00 oeminfo.bin, use AL00 dload. Then rebrand back to L29C432 using Hwota. It's currently the only free way of rolling back to Nougat.
ante0 said:
You need to rebrand to AL00C00 to rollback.
In other words, flash AL00 oeminfo.bin, use AL00 dload.
Click to expand...
Click to collapse
I've change some things in system. It's there a problem to use dload if I have change system?
Also I've to have dload on external sdcard right?
So the steps are:
Flash oeminfo.bin info
Then use erecovery and dload right
albertobom said:
I've change some things in system. It's there a problem to use dload if I have change system?
Also I've to have dload on external sdcard right?
So the steps are:
Flash oeminfo.bin info
Then use erecovery and dload right
Click to expand...
Click to collapse
It doesn't check system or any other partition so it will install.
Yes, ext sd:/dload/files from AL00C00(B115 is what I used) dload rar.
Extract dload rar, place all files on external SD in dload folder.
Flash AL00C00 oeminfo.bin. use vol up+vol down+power to boot, make sure USB is unplugged else it will stuck on 5%.
After you will have to rebrand back to L29C432 using HWOTA.
ante0 said:
It doesn't check system or any other partition so it will install.
Yes, ext sd:/dload/files from AL00C00(B115 is what I used) dload rar.
Extract dload rar, place all files on external SD in dload folder.
Flash AL00C00 oeminfo.bin. use vol up+vol down+power to boot, make sure USB is unplugged else it will stuck on 5%.
After you will have to rebrand back to L29C432 using HWOTA.
Click to expand...
Click to collapse
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?
albertobom said:
So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432
Click to expand...
Click to collapse
Why to rollback?
Enviado desde mi MHA-L29 mediante Tapatalk
jaimeguate said:
Why to rollback?
Enviado desde mi MHA-L29 mediante Tapatalk
Click to expand...
Click to collapse
Nothing special really just want to know if I can go back if I have to. ?
albertobom said:
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?
Click to expand...
Click to collapse
Oeminfo in this thread: https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656 can be restored as a backup. That's probably the easiest way.
Alternative, copy and flash using dd.
cp /external_sd/MHA-AL00C00. bin /tmp/oeminfo.bin
dd if=/tmp/oeminfo.bin of=/dev/block/sdd5
5[Strogino said:
;74268268]MHA-AL00C00B125 - https://mega.nz/#!1853WCAQ!uuCgvn4a7JXHSmEmlBzdMsOOC9vQFJ3WSuMUQI9NDVM
MHA-AL00C00B115 - https://mega.nz/#!88RmjJjA!gGmuc0gL-_sPHOQ0VAXZgTJ3lXmlRRmBqXIYNEyw9XY
MHA-L29C185B186 - http://androidhost.ru/KR
MHA-L29C636B181 - https://forum.xda-developers.com/mate-9/help/bricked-mate-9-help-t3664727/post73988779
MHA-L29C636B122 -
https://drive.google.com/file/d/0BxUuiDq_FRA_cHlHc3BTWEFOUlU/view?usp=sharing
LON-AL00C00B229 - http://androidhost.ru/KZ
LON-L29C432B225 - http://androidhost.ru/L0
LON-L29C185B225 - http://androidhost.ru/L3
LON-L29C636B225 - http://androidhost.ru/L2
LON-L29C721B186 - http://androidhost.ru/L1
Please, make mirror or copy your region ROM to own archive to avoid situation if main source is not available or deleted.
Click to expand...
Click to collapse
Hi bro can you send me oeminfo of chinese version of p8 lite 2017/honor 8 lite????
I want to rebrand my phone
ante0 said:
You extract zip, put contents in external_sd/dload/
then boot using vol up + vol down + power. It's useful if you manage to brick or want to rebrand.
Or want to rollback from Oreo to Nougat.
---------- Post added at 10:54 PM ---------- Previous post was at 10:23 PM ----------
Phew. Thanks to these dload images...
I was going to update to Oreo again to try some stuff to get Magisk running.
I downloaded Oreo Beta from pro-teammt.ru using Linux. Little did I know the update.zip was corrupt (Later I tried downloading multiple times using both browser and wget, different MD5 each time so something is up with my computer).
So I updated like usual using HWOTA. It started installing, I don't know how long it got to, but I was presented with a screen that said PLEASE REDOWNLOAD PACKAGE USING RECOVERY.
So I rebooted. ERROR MODE. Now I'm scared... I googled "Mate 10 release date" just in case, lol.
I rebooted to fastboot mode, thankfully it still worked. I had to unlock bootloader again. Now I tried flashing stock B197 recovery, FAILED: (remote: partition length get error).
I tried the same with boot. Same result.
Then I figured out it probably had the new Oreo partition names for boot and recovery, and thankfully those flashed fine.
So flashed TWRP for Oreo, flashed oeminfo for AL00C00 using dd. Flashed ERECOVERY partitions using dd as well, just in case.
Back to bootloader to unlock again after flashing oeminfo, then flashed back stock recovery_ramdisk.
Then placed dload folder on external sd and booted up using vol up+down+power
Now my Mate 9 is booting up again!
Click to expand...
Click to collapse
Hi, I'm having a similiar issue. I can't flash any recovery using fastboot (FAILED: (remote: partition length get error). , I'm on emui 5.0.1 android 7.0 (phone works perfectly fine), is possible to flash TWRP recovery using DD? if so, how? it's my first time doing this with a huawei phone and I want to try oreo beta
UPDATE:
Bricked it, can't flash recovery, only fastboot, can't force update neither, any idea?
seniga1 said:
Hi, I'm having a similiar issue. I can't flash any recovery using fastboot (FAILED: (remote: partition length get error). , I'm on emui 5.0.1 android 7.0 (phone works perfectly fine), is possible to flash TWRP recovery using DD? if so, how? it's my first time doing this with a huawei phone and I want to try oreo beta
UPDATE:
Bricked it, can't flash recovery, only fastboot, can't force update neither, any idea?
Click to expand...
Click to collapse
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.
ante0 said:
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.
Click to expand...
Click to collapse
flash recovery_ramdisk twrp.img
That did the trick, really appreciated, you'r my new hero :highfive:
Oreo updates
albertobom said:
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?
Click to expand...
Click to collapse
You should be able to get updates if you are on the Oreo beta, update checks for stock recovery and won't update if you are on a custom or patched recovery, system update would just see you as updating from beta to release version, beta and release versions are both official ROMs so I don't think you would have any issues with updating as long as the device brand is the same.
plz help sir
ante0 said:
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.
Click to expand...
Click to collapse
I did what you have described above ... flashed oreo twrp successfully but when tried to boot into TWRP it never boots into TWRP ( only a screen appears having three options : 1. Reboot system now 2. Wipe data/factory reset 3. Wipe cache partition.
I'm neither able to perform wipe data/factory reset nor able to wipe cache( it goes to 40% and gives error)
Struck here for more than 15 days...any help will be highly appreciated.
jaldi said:
I did what you have described above ... flashed oreo twrp successfully but when tried to boot into TWRP it never boots into TWRP ( only a screen appears having three options : 1. Reboot system now 2. Wipe data/factory reset 3. Wipe cache partition.
I'm neither able to perform wipe data/factory reset nor able to wipe cache( it goes to 40% and gives error)
Struck here for more than 15 days...any help will be highly appreciated.
Click to expand...
Click to collapse
You do have Oreo, right?
TWRP should fail to install if you don't have Oreo (unless you're flashing it to recovery and not recovery_ramdisk).
But it sounds to me like it's not installing at all, since you're ending up in stock recovery.
Make sure you use "fastboot flash" , not "fastboot boot"

[request] oeminfo.img for pralx1c432

I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Wire1122 said:
I want the single Sim oeminfo.img for my p8 lite 2017 to install single Sim fw. Firmware could be Pralx1c432b169 and so on. Can you help me?
Click to expand...
Click to collapse
In page 3 there is the new download link. It is a dual sim oeminfo but there if you read a little about it it works exactly fine on a single sim variant too.
https://forum.xda-developers.com/p8...ussion/request-pra-lx1-oeminfo-t3581091/page3
Hope it helped
Ok, but to install a single Sim fw?
Wire1122 said:
Ok, but to install a single Sim fw?
Click to expand...
Click to collapse
It's your choice. In a normal situation that should work too
Can you explain it? I must flash oeminfo through twrp and then?
Wire1122 said:
Can you explain it? I must flash oeminfo through twrp and then?
Click to expand...
Click to collapse
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
not working only bootloop
Wire112233 said:
not working only bootloop
Click to expand...
Click to collapse
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
GedeonTaylor said:
Maybe something is not working how it should. Then connect to a usb cable which is plugged into you computer and hold vol up and pwr button. If you did it correctly now you are in erecovery. Download the latest. If it says it can't download then you are missing something..!
Click to expand...
Click to collapse
right but downloading b170 rom. I want b171 single sim not b170 dualsim
GedeonTaylor said:
Steps:
1. Download the latest full pra-lx1c432 firmware. - If you don't have it, download it from here: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
2. Download huawei update extractor. -If you don't have it, download it from here: https://forum.xda-developers.com/showthread.php?t=2433454
3. Extract UPDATE.APP using HUE. You can find it inside the firmwire zip you just downloaded.
4. Using fastboot, you will need to flash: System, boot, recovery. (Move them to the adb location)
4. - This will take some time
a. fastboot flash system system.img
b. fastboot flash boot boot.img
c. fastboot flash recovery recovery.img
Now if you done, do a factory reset with stock recovery.
Your phone is now stock again.
Click to expand...
Click to collapse
The pra does not tolerate such flash orgies. Or did you test it before posting?
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
chinhon, can you guides me to correcrly install b171 fw?
Wire112233 said:
chinhon, can you guides me to correcrly install b171 fw?
Click to expand...
Click to collapse
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
not working, after Huawei logo the smartphone reboot itself such after a factory reset
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
ChinHon said:
Use the Firmware Finder for this. I have no experience with it, but there are very good instructions at xda.
Click to expand...
Click to collapse
not work. On device info only show the security patch to 5 february. The fw version is the same before, so b170
ChinHon said:
The pra does not tolerate such flash orgies. Or did you test it before posting?
Click to expand...
Click to collapse
Yes, I did..
surdu_petru said:
Flash : system, boot & recovery image via bootloader ( if its already unlocked ) it should work on any Android devices ... I don't see why here, it should be different
Click to expand...
Click to collapse
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
ChinHon said:
The PRA is a mystery. There's usually a brick in this. Often a bootloop. Sometimes it works. That's why I don't like to recommend it. Why I couldn't find out so far and therefore put a rescue rom online
Click to expand...
Click to collapse
I don't understand the PRA myself..I've soft-bricked mine a couple of times and have recovered using different methods and not one foolproof way.
Can I flash stock fw with twrp?
No, unless someone has a backup for you. Take the K-Rom v. 3.3 and make it unroot. Then you have a stock rom.
Hey guys, now it's time for eRecovery!!

(Help) My P8 Lite 2017 (PRA-LX1) is bricked

Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
If your phone is really hard bricked and can't do anything, check this out:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
luigifan3 said:
I know how to use dload, but how I can boot into dload mode with TWRP installed and bootloader locked?
Click to expand...
Click to collapse
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
dinoderda said:
Dload works no matter what,at least I was able to enter it when I bricked my phone,even when I completely screwed up my recovery partition,so you should be good. Try using it with the service firmware I left you.
Click to expand...
Click to collapse
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
luigifan3 said:
Now I have downloaded the service firmware so how I am going to flash it now? Like do I extract the UPDATE.APP and flash it in TWRP or what? You said that flash UPDATE.APP, but am I going to do that in dload mode or TWRP?
Click to expand...
Click to collapse
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
dinoderda said:
In dload,make sure you make a folder in the root of your sdcard called dload and put that in there.
Click to expand...
Click to collapse
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
luigifan3 said:
Now I have the UPDATE.APP in my dload folder, but how I boot to the dload mode now?
Click to expand...
Click to collapse
Volume Up + Volume Down + Power Button.
dinoderda said:
Volume Up + Volume Down + Power Button.
Click to expand...
Click to collapse
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
luigifan3 said:
I tried that, it just boots into TWRP
EDIT: I got to dload, but it says software installation failed
Click to expand...
Click to collapse
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
luigifan3 said:
Hello,
I was trying to install a custom ROM from TWRP to my P8 Lite 2017 and I wiped all partitions except MicroSD.
The installation failed and I got the stock ROM and then I discovered that my bootloader is locked. I can access TWRP and when I flashed the stock ROM the phone just boots to TWRP Recovery. And I can't even unlock the bootloader because the phone doesn‘t have any OS and I can‘t enable OEM unlocking from the system settings. And because I have TWRP, I can’t access Huawei Recovery. So my phone is basically bricked.
Any help will be appreciated
Click to expand...
Click to collapse
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
RAR1991 said:
if you have TWRP installed could you make a backup of your oeminfo partition so we could provide you the right firmware to recover your device
Click to expand...
Click to collapse
Ok, but does it provide the right info if I have flashed different oeminfo.img?
dinoderda said:
Hm,make sure you used the service firmware I left you,but if you are sure you did,your last resort is DC Phoenix which you will need to pay 20 euros.
Click to expand...
Click to collapse
I've tried a different firmware for my device and now I can't get to dload anymore so does it mean that I've chosen the wrong firmware? And by the way I read somewhere that if the dload says error it can depend on the microsd card.
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
luigifan3 said:
I tried it again with the service firmware and I got to dload and it didn't have error anymore and now I've got everything worked and my phone is unbricked
Click to expand...
Click to collapse
great
I was stuck with a similar problem. Device bricked and flashing TWRP and restoring backups, then stock recovery and stock roms, but nothing worked until I found this post. Thanks a lot dinoderda for your help.
dinoderda said:
Use dload with a service firmware.
You need to flash this 2 times,once for the firmware and second time for vendor,and the firmware UPDATE.APP can be found in the update_sd.zip and the vendor UPDATE.APP can be found in the PRA-L31 or PRA-L11 folders (most likely you will have PRA-L31,you can find this in the engineering menu by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info,but since you cannot boot flash PRA-L31 vendor).
http://androidhost.ru/6uc - this is latest firmware,but takes a very very long time to download
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is the first official firmware released,but download speed is very good
If you don't know how to use dload you can look it up on forums.
Click to expand...
Click to collapse
Hello again, I've been using the older service firmware for few months now and now I decided to install the latest service firmware after I had no success with flashing the firmware through TWRP and I downloaded the service firmware put the necessary files to the dload folder and installed it via the software update in the dialer and typing *#*#2846579#*#* and going to dload that way. It installed to 100% and then when it restarted it goes to Error Mode and it says to update the firmware again but it just loops to error mode and I cannot do anything so I think I accidentally removed some neccessary files in the dload folder but now I would need to fix the error mode loop.

Categories

Resources