Database Develop

EVA-L09 Bricked, please help.

Hello all
I have a problem with my Huawei P9 (Eva L09). During my dload update my smartphone shutdown without any advice. So update process has been completed therefore device does boot and stucked in Huawei logo and jumped to Huawei erecovery. Recocery mode does works but i cannot re flash a new firmware. Fastboot mode works. I re flash system.img boot.img and so on as a thread in this forum says but nothing to do. Device does not work. Hisuite can restote all in fastboot mode but seems that my device is not compatible. It is last version of hisuite. My bootloader and FRP mode locked. Someone can help me?
Thanks in advance
Update: My phone now just only go to fastboot mode and can not boot up to recovery mode now, always boot to logo screenand stuck, please help! Thanks

Flash rom from dload from sd card. After flash when system not start go back to recovery and wipe data and factory reset. Turn on again. When system not work flash again from dload. Use 3 button to turn on phone
<<<by scaniathe>>>

scaniathe said:
Flash rom from dload from sd card. After flash when system not start go back to recovery and wipe data and factory reset. Turn on again. When system not work flash again from dload. Use 3 button to turn on phone
<<<by scaniathe>>>
Click to expand...
Click to collapse
but when I started flash until 5%, it said firmware failed to install and just gave me the option was"reboot system now" and reboot back to erecovery, so annoying.....:crying:

different firmware??
probably wrong type of firmware...
there are several types of firmware for L09 two in particular I messed around... since I was in your shoe too...
one was B136 and the other was i think B165
try installing another firmware

C432b182 latest from huawei.customer.com
<<<by scaniathe>>>

sk0n3 said:
probably wrong type of firmware...
there are several types of firmware for L09 two in particular I messed around... since I was in your shoe too...
one was B136 and the other was i think B165
try installing another firmware
Click to expand...
Click to collapse
which firmware should I flash for the phone? C432B136?

scaniathe said:
C432b182 latest from huawei.customer.com
<<<by scaniathe>>>
Click to expand...
Click to collapse
I tried, but it was still said "install firmware fail".......

scaniathe said:
C432b182 latest from huawei.customer.com
<<<by scaniathe>>>
Click to expand...
Click to collapse
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
sk0n3 said:
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
/\ /\ /\ /\ /\ /\ /\ /\
this guy works with one click its pretty cool

Stock recovery install automatically with reinstall firmware from dload. Format your all data from twrp and reinstall again
<<<by scaniathe>>>

scaniathe said:
Stock recovery install automatically with reinstall firmware from dload. Format your all data from twrp and reinstall again
<<<by scaniathe>>>
Click to expand...
Click to collapse
when i did mine i downloaded the ROOT-HUAWEI-P9.zip/extract then used part 1 to install twrp from bootloader
then boot to recovery wipe data cache system
go back to the extracted zip file and use part 3 to reinstall stock recovery
then check to see if you have dload folder with UPDATE.APP in your main directory o your sd card
then turn your phone off hold vol up and down and pwr/ after first vibration release pwr button
---------- Post added at 08:31 AM ---------- Previous post was at 08:30 AM ----------
sk0n3 said:
when i did mine i downloaded the ROOT-HUAWEI-P9.zip/extract then used part 1 to install twrp from bootloader
then boot to recovery wipe data cache system
go back to the extracted zip file and use part 3 to reinstall stock recovery
then check to see if you have dload folder with UPDATE.APP in your main directory o your sd card
then turn your phone off hold vol up and down and pwr/ after first vibration release pwr button
Click to expand...
Click to collapse
if the update stops at 5% change firmware to B136 and try

sk0n3 said:
have you tried installing other firmwares?
one thing you might be able to do is...
1 flash twrp
2 wipe cache, data, system
3 reinstall system recovery
4 dload stock firmware
---------- Post added at 08:08 AM ---------- Previous post was at 08:04 AM ----------
http://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
/\ /\ /\ /\ /\ /\ /\ /\
this guy works with one click its pretty cool
Click to expand...
Click to collapse
but my bootloader and FRP are locked now, can use the other methods to fix it? thanks

It's been suggested a couple of times already... Flash C432B136.
Sent from my EVA-L09 using Tapatalk

elspinat said:
It's been suggested a couple of times already... Flash C432B136.
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
now I want to turn off my phone, but can't turn it off and always boot to huawei logo screen how can I turn it off, please? thanks:crying:

You must connect to pc install adb and fastboot or srk tool and try fixed from pc
<<<by scaniathe>>>

scaniathe said:
You must connect to pc install adb and fastboot or srk tool and try fixed from pc
<<<by scaniathe>>>
Click to expand...
Click to collapse
I installed already, but the main point is, the bootloader and FRP mode are locked, if I used srk tool that must be unlock bootloader first...I'm so annoying...please help!

You unlock botloader fixed phone and lock again
<<<by scaniathe>>>

FRP mode is factory reset protection you know that right?

benjamen50 said:
FRP mode is factory reset protection you know that right?
Click to expand...
Click to collapse
I think it is....do you know how to fix it?? you can chat with me in PM....Thanks

scaniathe said:
You unlock botloader fixed phone and lock again
<<<by scaniathe>>>
Click to expand...
Click to collapse
the main point is I can boot into bootloader and rescue mode but i can't unlock bootloader....because the device's bootloader looked and also can't not use Hisuite to restore the firmware....so I'm very frustrate now.....:crying:

If I remember correctly even if FRP lock is enabled it should still allow official Huawei Firmware to be flashed onto the phone. It just means that you will need to enter most likely a google username and password (that was used to enable factory reset protection on the device) during the device initial setup wizard screen after the phone boots up for the first time after firmware flash / factory reset.
Though it is weird that you can't do the firmware flash via the system recovery option in hisuite. The device should be able to boot into system recovery mode (fastboot mode) right?
What happens when you try to do it? Does some error message come up?

Honor 5c L21 aka 7 lite

I update to B132 and I have some bug on this firmware
https://www.youtube.com/watch?v=1yVya1LV5IM
https://www.youtube.com/watch?v=-Mhg3hdcSq0
I want to dowgrade from nem-l21_c432b132 back to stock nem-l21_c432b100
I copy the dload and update.app B100 + *#*#2846579#*#* and press update, but is not working, i get update failed.
How can downgrade the firmware?

You got the update fail cause your version is higher than b100.
I think that if you want to downgrade you will have to download Full B100 not the OTA.
But I recommend if you want to do this use the b130 - I am using it and it is very good.
Do the whole procedurę through turned of phone: then VOL down and up together if I remember correctly.

I have try Full B100 not ota.
Not working.
Maybe some one know how to downgrade with fastboot?
nem-l21_c432b132 to nem-l21_c432b130 is working downgrade.
But i want nem-l21_c432b100

i try flashboot
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
At fastboot flash system system.img i get failed
someone can help me?

@zzhunt This is an experimental method to go back to B100 by using OEMinfo. You do on your own risk! Required unlocked bootloader and installed TWRP (from Meticulus). Before performing make a full backup in TWRP.
1. Download here this package and put together of firmware B100 on the memory card,
2. Run and install in TWRP this package.
3. When finished install it, restart your smartphone to fastboot mode (Reboot>Bootloader)
4. Plug it into your computer and flash original recovery [LINK] a command "fastboot flash recovery recovery.img"
5. When you can flashed, then disconnect and hold power switch. When the informations will disappear from the display, immediately press the buttons Volume up and Volume down,
6. Will start the flashing system and after finishing restart your smartphone
7. Done!
I tested so far only on my device and don't know, what will happen with smartphone a different serial number/IMEI etc., but rather it should go.

@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed

zzhunt said:
@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed
Click to expand...
Click to collapse
Reverting back can be done by putting the full update in dload folder in sdcard. I have once got that error that u r talking about after the installing process completed. So i simply rebooted. And i got the stock one. So try this, just reboot and see.

@Shubho20 not working
https://www.youtube.com/watch?v=zLBrrrAJ1WQ&feature=youtu.be
I also go today to huawei service to flash the B100, and they can not flash.
They try but also not working

zzhunt said:
@Shubho20 not working
&feature=youtu.be
I also go today to huawei service to flash the B100, and they can not flash.
They try but also not working
Click to expand...
Click to collapse
What does ur dload folder contain? Only update.app?

yes

Shubho20 said:
What does ur dload folder contain? Only update.app?
Click to expand...
Click to collapse
And does the update process complete and then show that error?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
zzhunt said:
yes
Click to expand...
Click to collapse
In full stock firmware, after extracting it, there is dload folder. In dload folder there will be 2 folders and update app.

I try B100 firmware bulgaria and greece
On greece is only dload folder and update.app
And in bulgaria is 1 folder hw + update.app
http://postimg.org/image/w6e41dxet/
in hw folder is other folder EU and inside is update_data_hw_eu.app
I try with update.app + this folder.
Not working, at 5% fail install and start normal.

I want to go back to B100 because this updates B130-131-132 is junk for me.
Only problems i have
https://postimg.org/image/tkuz6g901/
https://postimg.org/image/4qbhcdo5t/
Double icons
Keyboard sometime freeze
https://www.youtube.com/watch?v=1yV..._comment_id=z131wfkqszjtzdi3l222x52jtmj0fpc3x
Fingerprint problems
This 3 updates for me is misery, only bugs i have

zzhunt said:
@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed
Click to expand...
Click to collapse
You have unlocked bootloader? If not, you'll have to unlock - here is a tutorial on how to do it. Then you flash TWRP and perform what I wrote previously.

for me b132 optimized alot battery life and ram usage. also gpu works better.

PRA-LX1 I want to install stock firmware.

I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.

I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.

MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.

barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.

barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.

JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".

barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?

barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.

similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.

Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???

Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!

MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it

Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.

Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!

juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed

JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images

tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/

[TIPS] Revert Custom Rom to Official and untouched - Hard restore

Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!

hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD

macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.

Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone

In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..

Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...

You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).

Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.

What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)

Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.

I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)

Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?

islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.

Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...

islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?

Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?

islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.

Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you

Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!

Hi,
I followed your guide and it works perfectly thanks!

[ROM] Service ROMs

MHA-AL00C00B125 - https://mega.nz/#!1853WCAQ!uuCgvn4a7JXHSmEmlBzdMsOOC9vQFJ3WSuMUQI9NDVM
MHA-AL00C00B115 - https://mega.nz/#!88RmjJjA!gGmuc0gL-_sPHOQ0VAXZgTJ3lXmlRRmBqXIYNEyw9XY
MHA-L29C185B186 - http://androidhost.ru/KR
MHA-L29C636B181 - https://forum.xda-developers.com/mate-9/help/bricked-mate-9-help-t3664727/post73988779
MHA-L29C636B122 -
https://drive.google.com/file/d/0BxUuiDq_FRA_cHlHc3BTWEFOUlU/view?usp=sharing
LON-AL00C00B229 - http://androidhost.ru/KZ
LON-L29C432B225 - http://androidhost.ru/L0
LON-L29C185B225 - http://androidhost.ru/L3
LON-L29C636B225 - http://androidhost.ru/L2
LON-L29C721B186 - http://androidhost.ru/L1
Please, make mirror or copy your region ROM to own archive to avoid situation if main source is not available or deleted.

hw to install

Waleedaligomaa said:
hw to install
Click to expand...
Click to collapse
You extract zip, put contents in external_sd/dload/
then boot using vol up + vol down + power. It's useful if you manage to brick or want to rebrand.
Or want to rollback from Oreo to Nougat.
---------- Post added at 10:54 PM ---------- Previous post was at 10:23 PM ----------
Phew. Thanks to these dload images...
I was going to update to Oreo again to try some stuff to get Magisk running.
I downloaded Oreo Beta from pro-teammt.ru using Linux. Little did I know the update.zip was corrupt (Later I tried downloading multiple times using both browser and wget, different MD5 each time so something is up with my computer).
So I updated like usual using HWOTA. It started installing, I don't know how long it got to, but I was presented with a screen that said PLEASE REDOWNLOAD PACKAGE USING RECOVERY.
So I rebooted. ERROR MODE. Now I'm scared... I googled "Mate 10 release date" just in case, lol.
I rebooted to fastboot mode, thankfully it still worked. I had to unlock bootloader again. Now I tried flashing stock B197 recovery, FAILED: (remote: partition length get error).
I tried the same with boot. Same result.
Then I figured out it probably had the new Oreo partition names for boot and recovery, and thankfully those flashed fine.
So flashed TWRP for Oreo, flashed oeminfo for AL00C00 using dd. Flashed ERECOVERY partitions using dd as well, just in case.
Back to bootloader to unlock again after flashing oeminfo, then flashed back stock recovery_ramdisk.
Then placed dload folder on external sd and booted up using vol up+down+power
Now my Mate 9 is booting up again!

Where L09 ..??
Sent from my MHA-L09 using XDA-Developers Legacy app

ante0 said:
Now my Mate 9 is booting up again!
Click to expand...
Click to collapse
That was some journey to the dark side. Welcome back.

So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432

albertobom said:
So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432
Click to expand...
Click to collapse
You need to rebrand to AL00C00 to rollback.
In other words, flash AL00 oeminfo.bin, use AL00 dload. Then rebrand back to L29C432 using Hwota. It's currently the only free way of rolling back to Nougat.

ante0 said:
You need to rebrand to AL00C00 to rollback.
In other words, flash AL00 oeminfo.bin, use AL00 dload.
Click to expand...
Click to collapse
I've change some things in system. It's there a problem to use dload if I have change system?
Also I've to have dload on external sdcard right?
So the steps are:
Flash oeminfo.bin info
Then use erecovery and dload right

albertobom said:
I've change some things in system. It's there a problem to use dload if I have change system?
Also I've to have dload on external sdcard right?
So the steps are:
Flash oeminfo.bin info
Then use erecovery and dload right
Click to expand...
Click to collapse
It doesn't check system or any other partition so it will install.
Yes, ext sd:/dload/files from AL00C00(B115 is what I used) dload rar.
Extract dload rar, place all files on external SD in dload folder.
Flash AL00C00 oeminfo.bin. use vol up+vol down+power to boot, make sure USB is unplugged else it will stuck on 5%.
After you will have to rebrand back to L29C432 using HWOTA.

ante0 said:
It doesn't check system or any other partition so it will install.
Yes, ext sd:/dload/files from AL00C00(B115 is what I used) dload rar.
Extract dload rar, place all files on external SD in dload folder.
Flash AL00C00 oeminfo.bin. use vol up+vol down+power to boot, make sure USB is unplugged else it will stuck on 5%.
After you will have to rebrand back to L29C432 using HWOTA.
Click to expand...
Click to collapse
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?

albertobom said:
So with this Builds I can rollback from Oreo to naught? But my phone isn't listed... European MHA-L29C432
Click to expand...
Click to collapse
Why to rollback?
Enviado desde mi MHA-L29 mediante Tapatalk

jaimeguate said:
Why to rollback?
Enviado desde mi MHA-L29 mediante Tapatalk
Click to expand...
Click to collapse
Nothing special really just want to know if I can go back if I have to. ?

albertobom said:
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?
Click to expand...
Click to collapse
Oeminfo in this thread: https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656 can be restored as a backup. That's probably the easiest way.
Alternative, copy and flash using dd.
cp /external_sd/MHA-AL00C00. bin /tmp/oeminfo.bin
dd if=/tmp/oeminfo.bin of=/dev/block/sdd5

5[Strogino said:
;74268268]MHA-AL00C00B125 - https://mega.nz/#!1853WCAQ!uuCgvn4a7JXHSmEmlBzdMsOOC9vQFJ3WSuMUQI9NDVM
MHA-AL00C00B115 - https://mega.nz/#!88RmjJjA!gGmuc0gL-_sPHOQ0VAXZgTJ3lXmlRRmBqXIYNEyw9XY
MHA-L29C185B186 - http://androidhost.ru/KR
MHA-L29C636B181 - https://forum.xda-developers.com/mate-9/help/bricked-mate-9-help-t3664727/post73988779
MHA-L29C636B122 -
https://drive.google.com/file/d/0BxUuiDq_FRA_cHlHc3BTWEFOUlU/view?usp=sharing
LON-AL00C00B229 - http://androidhost.ru/KZ
LON-L29C432B225 - http://androidhost.ru/L0
LON-L29C185B225 - http://androidhost.ru/L3
LON-L29C636B225 - http://androidhost.ru/L2
LON-L29C721B186 - http://androidhost.ru/L1
Please, make mirror or copy your region ROM to own archive to avoid situation if main source is not available or deleted.
Click to expand...
Click to collapse
Hi bro can you send me oeminfo of chinese version of p8 lite 2017/honor 8 lite????
I want to rebrand my phone

ante0 said:
You extract zip, put contents in external_sd/dload/
then boot using vol up + vol down + power. It's useful if you manage to brick or want to rebrand.
Or want to rollback from Oreo to Nougat.
---------- Post added at 10:54 PM ---------- Previous post was at 10:23 PM ----------
Phew. Thanks to these dload images...
I was going to update to Oreo again to try some stuff to get Magisk running.
I downloaded Oreo Beta from pro-teammt.ru using Linux. Little did I know the update.zip was corrupt (Later I tried downloading multiple times using both browser and wget, different MD5 each time so something is up with my computer).
So I updated like usual using HWOTA. It started installing, I don't know how long it got to, but I was presented with a screen that said PLEASE REDOWNLOAD PACKAGE USING RECOVERY.
So I rebooted. ERROR MODE. Now I'm scared... I googled "Mate 10 release date" just in case, lol.
I rebooted to fastboot mode, thankfully it still worked. I had to unlock bootloader again. Now I tried flashing stock B197 recovery, FAILED: (remote: partition length get error).
I tried the same with boot. Same result.
Then I figured out it probably had the new Oreo partition names for boot and recovery, and thankfully those flashed fine.
So flashed TWRP for Oreo, flashed oeminfo for AL00C00 using dd. Flashed ERECOVERY partitions using dd as well, just in case.
Back to bootloader to unlock again after flashing oeminfo, then flashed back stock recovery_ramdisk.
Then placed dload folder on external sd and booted up using vol up+down+power
Now my Mate 9 is booting up again!
Click to expand...
Click to collapse
Hi, I'm having a similiar issue. I can't flash any recovery using fastboot (FAILED: (remote: partition length get error). , I'm on emui 5.0.1 android 7.0 (phone works perfectly fine), is possible to flash TWRP recovery using DD? if so, how? it's my first time doing this with a huawei phone and I want to try oreo beta
UPDATE:
Bricked it, can't flash recovery, only fastboot, can't force update neither, any idea?

seniga1 said:
Hi, I'm having a similiar issue. I can't flash any recovery using fastboot (FAILED: (remote: partition length get error). , I'm on emui 5.0.1 android 7.0 (phone works perfectly fine), is possible to flash TWRP recovery using DD? if so, how? it's my first time doing this with a huawei phone and I want to try oreo beta
UPDATE:
Bricked it, can't flash recovery, only fastboot, can't force update neither, any idea?
Click to expand...
Click to collapse
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.

ante0 said:
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.
Click to expand...
Click to collapse
flash recovery_ramdisk twrp.img
That did the trick, really appreciated, you'r my new hero :highfive:

Oreo updates
albertobom said:
Thanks my dear friend I'm at beta oreo and it's running amazing but I think I'll have to go back to N so I can make new updates since Oreo doesn't have patched recovery yet.
---------- Post added at 10:41 PM ---------- Previous post was at 10:05 PM ----------
@ante0 where or how do I flash oeminfo.bin? Via twrp? With a flashable zip?
Click to expand...
Click to collapse
You should be able to get updates if you are on the Oreo beta, update checks for stock recovery and won't update if you are on a custom or patched recovery, system update would just see you as updating from beta to release version, beta and release versions are both official ROMs so I don't think you would have any issues with updating as long as the device brand is the same.

plz help sir
ante0 said:
recovery is named recovery_ramdisk on Oreo.
So fastboot flash recovery_ramdisk twrp.img
Make sure you flash twrp from the oreo thread.
If you're on Nougat recovery partition is named recovery, so:
Fastboot flash recovery twrp.img
Twrp is in the regular twrp thread.
You can only use dd in twrp, not using fastboot.
If you tried updating to Oreo I would try both recovery and recovery_ramdisk.
Click to expand...
Click to collapse
I did what you have described above ... flashed oreo twrp successfully but when tried to boot into TWRP it never boots into TWRP ( only a screen appears having three options : 1. Reboot system now 2. Wipe data/factory reset 3. Wipe cache partition.
I'm neither able to perform wipe data/factory reset nor able to wipe cache( it goes to 40% and gives error)
Struck here for more than 15 days...any help will be highly appreciated.

jaldi said:
I did what you have described above ... flashed oreo twrp successfully but when tried to boot into TWRP it never boots into TWRP ( only a screen appears having three options : 1. Reboot system now 2. Wipe data/factory reset 3. Wipe cache partition.
I'm neither able to perform wipe data/factory reset nor able to wipe cache( it goes to 40% and gives error)
Struck here for more than 15 days...any help will be highly appreciated.
Click to expand...
Click to collapse
You do have Oreo, right?
TWRP should fail to install if you don't have Oreo (unless you're flashing it to recovery and not recovery_ramdisk).
But it sounds to me like it's not installing at all, since you're ending up in stock recovery.
Make sure you use "fastboot flash" , not "fastboot boot"