I was updating to tizen with kies 3 ,the procedure has failed and now my gear is always in download mode .
I've tried to flash with odin but alwais fail...
any idea??
sorry for my english
Related
Hi there
i am new here ....
so i have SGM and i flashed GT-s5570i firmware in cwm and push restart and then it got :silly: 'DEaD'
so my phone still detectable by odin (not the download mode) but 'emergency download mode'
is there a programe to flash a new firmware using the 'emergency download mode'
i didn't try heimdall , just odin but it stuck at setup conn.
so please some help
is heimdall will work ?
the-bomber said:
Hi there
i am new here ....
so i have SGM and i flashed GT-s5570i firmware in cwm and push restart and then it got :silly: 'DEaD'
so my phone still detectable by odin (not the download mode) but 'emergency download mode'
is there a programe to flash a new firmware using the 'emergency download mode'
i didn't try heimdall , just odin but it stuck at setup conn.
so please some help
is heimdall will work ?
Click to expand...
Click to collapse
and what is emergency download mode (is there a way to force the phone into download mode)
i didn't try usb jig 'will it work ? '
and so i don't have resistors 'my bad luck'
can i force it via linux 'ubuntu'
or something like that
pleaaaase help :crying:
Try this see if it works and you could ask your queries in there as well...Good Luck
http://forum.xda-developers.com/showthread.php?t=1929525&highlight=brick
I have rooted Galaxy Gear with TWRP recovery and stock rom V700XXUAMII. Can I update my system to Tizen OS via Kies 2.6 ? Recovery and root doesn't bother Kies ?
Yes you can depending on your region. You'll have to put the gear into download mode and select firmware upgrade in kies. Type in the model number in all caps. Then serial number.
If you're in an unsupported country it will say it's unsupported. If that happens you'll have to use Odin and flash the Tizen firmware ending with NE9 first. Then you can flash the latest update.
Let me know if kies fails. I'll walk you thru Odin if it does.
Please help
Hi I am from South Africa , Tizen rolled out yesterday for the gear in my country but I am unable to update because when I plug in my gear it doesn't show up in kies but my note3 does , any help u can offer will b much appreciated I am fairly new to this stuff only have android for a few months , I always used apple which wen I pug my phone or any other device in it showed up immediately, I've even uninstalled kies and reinstalled really frustrating business this, please any help will b appreciated , thanks in advance
When kies isn't recognizing your device, you can use odin. Odin is a separate pc based software which can flash firmware to your gear.If your gear is currently running android software and you want to upgrade to tizen, you must first flash a tizen release ending with NE9. NE9 firmware has files to get you off of android and onto tizen. Once your on Tizen you can flash a newer release like the ones ending with NF1.
In order to flash Tizen,
Download*Odin v3.09
https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
Extract Odin zip-file
Open Odin v3.09
Put gear into download mode. (Hold power button until you see it say rebooting, then tap 5 times.)
Connect to PC with usb dock.
Wait until you get a blue sign in odin. (re-download samsung drivers if no blue sign appears)
Add the firmware file to AP / PDA (firmware files below)
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Reboot and you'll be stock Tizen, first release. In order to upgrade Tizen you can flash the newest firmware the same way.
NE9 Tizen firmware for United kingdom
http://www.mediafire.com/?c6qzuvuksuxcega
The latest Tizen release is NF1
NF1 Tizen firmware for United kingdom.
http://www.mediafire.com/?j66d0tzk5b1bwxt
If you desire a special countries release check here, or on sammobile.com
Please help!
Can u please walk me through Odin as I do not have my own computer and I'm using somebody else's laptop , should I uninstall kies 3and download Odin?, after I remove android where do I get tizen so from?, I am still new to flashing and I'm afraid that if I remove android from my gear I will have a gear without an OS please advise I am fairly new to this
No need to remove kies. Download the Odin file from link above. Also download the Tizen NE9 file.
Unzip the Odin folder. Open the file marked Odin and a program will start.
Put watch in download mode and plug into PC.
Odin should show connected.
In Odin click on "ap" and navigate to the NE9 file.
Click start button.
Wait a few minutes, it should restart.
Enjoy Tizen!
Repeat process with update from link above.
Still battling
Hi there again sorry for the inconvenience if u remember I was trying to upgrade my gear to tizen , I jus wanna know why my gear will not show up on my computer or kies or odin I have restored it 3 times and still nothing I can't seem to find the drivers for Utah I'm using windows 8, will my gear show up if I don't have the drivers and if not please can I have a link for the drivers so that I can try again , I am really distressed please help
Thank you creative Max
I just wanted to thank you for your help with helping me to flash tizen on my gear using odin
THANK YOU VERY MUCH IT FINALLY WORKED
hello guys
i was installing a rom on my GT-N7000 ,after finishing my phone showed The “Firmware upgrade encountered an issue, Please select recovery mode in Kies & Try Again”
i said ok lets look for a solution, i found several posts saying that i need to do an emergency recovery from kies
but kies doesn’t recognize my phone it says "device is not responding ,reboot "
i tried to install stock rom using odin but my phone won't boot into Download mood it is freezing at the screen above
so what should i do ? throw my phone from the nearest window ?
Omar42Nabil said:
hello guys
i was installing a rom on my GT-N7000 ,after finishing my phone showed The “Firmware upgrade encountered an issue, Please select recovery mode in Kies & Try Again”
i said ok lets look for a solution, i found several posts saying that i need to do an emergency recovery from kies
but kies doesn’t recognize my phone it says "device is not responding ,reboot "
i tried to install stock rom using odin but my phone won't boot into Download mood it is freezing at the screen above
so what should i do ? throw my phone from the nearest window ?
Click to expand...
Click to collapse
Did u install the samsung's latest drivers on ur PC?
tra_dax
tra_dax said:
Did u install the samsung's latest drivers on ur PC?
tra_dax
Click to expand...
Click to collapse
is there an official site i can download it from ?!
Omar42Nabil said:
is there an official site i can download it from ?!
Click to expand...
Click to collapse
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax
tra_dax said:
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax[/QUOTE
Click to expand...
Click to collapse
tra_dax said:
Try this one:
http://forum.xda-developers.com/showthread.php?t=1755001
v1.5.22.0
I would suggest u to use Odin instead of Samsung kies.
tra_dax
Click to expand...
Click to collapse
it won't boot into download mood is it ok to use odin when showing this message on mobile screen firmware upgrade encoutered an issue ??
Remove the battery for 30 secs and then try by pressing the power volume down and home.
[Solved]
i connected my phone to my pc with different USB cable and odin was able to recognize it even when showing this mobile cpmputer screen which says ' firmware upgrade encounterd ..... " the i flashed "PhilZ-cwm6-JPLSB-UAE-4.93.6.tar"
using odin and whithout download mode
and it all fine now after flshing the stock rom back
thnx for all who replyed
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
splurge_in said:
Hi Guys,
I was trying to update my N920G(INDIA) stock firmware from N920GDDU2AOL1 (india) to N920GUBU2AOJ8 (Ecuador) but at the end in odin 3.10.7 the firmware update failed. Now if i try to start the device I am getting an error message saying "Use the emergency recovery function in the Smart Switch PC software" but If i connect my device with Smart Switch PC software it shows that the device is unsupported .
What should I do?
PS: I am still able to go into the download mode
Click to expand...
Click to collapse
hi ,
most probably the reason Smart Switch is not working, is that you are "rooted " ?
Have you tried flashing the latest correct stock Rom of you device ,
not just any old Rom etc
(Reasons /think in terms of .. old /updated boot-loader etc )
ismailykr said:
Do not worry
run on pc kies and plug in with usb cable
The Kies software will recover .
Click to expand...
Click to collapse
hi ,
as far as i know Kies does not "work " on Note5
You have to use Smart Switch .
See screenshot what happens if you try to connect to Kies .
(i have N920 C in this case )
Further ,Smart Switch most probably only works on non rooted devices etc and not on rooted /modify devices .I might be wrong ,but this is what my understanding of Smart Switch .
good luck
Have you tried flashing back to stock OL1
Have you solved this problem? I have the same and neither smartswitch nor kies nor odin works. Please HELP!!!
Today i was updating my s10 exynos and during the flashing via odin i accidentaly disconnected the cable and the proccess failed
after i got an exclamation mark erros saying "an error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software"
I tried using this but nothing happend ( i tried reinstalling the device drivers).
plss help
https://snipboard.io/QYI0t7.jpg
https://snipboard.io/FHUouS.jpg
edit vol1 : i have the solution simply use odin to flash
How did you get into download mode? I have the same error and cannot get into the download mode
Edit: I fixed with my Z3x Samsung Tool Pro Box