I have been getting this error when I try to access the Internal storage on my Zuk Z2Pro,
Error " You do not have permission to access this device "
I have tried the following steps
1. Reinstall to factory version using the QFIL method
2. Tried to unlockboot loader ( It was unlocked in the first place but reattempted ) in the fastboot mode, it does say bootloader unlocked, but the secure boot is enabled ( not sure if secure boot should be enabled )
3. Reinstalled the drivers for fastboot and adb.
4. I am able to FTP to the internal storage using Wifi, but not through the USB cable in windows explorer. Even tried creating a new account to check if it was a windows profile issue.
5. Reflashed the 2.3.044 ( for some reason Zuk pushed the update )
Any help on the same ?
Did it work before?
Normally after pluging in your phone to pc you have to drag the notification bar and allow mtp access on your phone.
Afterwards you can see the storage on your phone.
Related
Happy holidays,
I am having trouble to get my htc one m7 back to normal.
I did erase my android and internal sd card( not backup on sd card avail).
What does it mean - after rebooting my phone is stuck in HTC logo screen not booting.
It was unlocked/rooted in the first place - my plan to do a factory reset
Another issue is that my PC (win 7) does not recognize my HTC ( as storage unit ), I tried driver updates,diff cables and another PC same issue ( Android 1.0) so I am unable to copy/access the htc's sd card
What i can access/see/work with:
bootloader menu
TWRP
Once i reboot from TWRP menu, it says "no OS installed"
I could feed more details if needed.
I am desperately looking for advice. If anyone could share some thoughts, I'd be very thankful
( not a native english speaker excuse my language,)
Cherrs
MKP1 said:
Happy holidays,
I am having trouble to get my htc one m7 back to normal.
I did erase my android and internal sd card( not backup on sd card avail).
What does it mean - after rebooting my phone is stuck in HTC logo screen not booting.
It was unlocked/rooted in the first place - my plan to do a factory reset
Another issue is that my PC (win 7) does not recognize my HTC ( as storage unit ), I tried driver updates,diff cables and another PC same issue ( Android 1.0) so I am unable to copy/access the htc's sd card
What i can access/see/work with:
bootloader menu
TWRP
Once i reboot from TWRP menu, it says "no OS installed"
I could feed more details if needed.
I am desperately looking for advice. If anyone could share some thoughts, I'd be very thankful
( not a native english speaker excuse my language,)
Cherrs
Click to expand...
Click to collapse
The phone only works in fastboot when in the bootloader and adb when in TWRP
from TWRP sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_83.1.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
if you have trouble with sideload use push
adb push rom.zip /sdcard/
Thank you very much sir ! Works like a charm,
Much appreciated !
after installed super su I reboot my devices but it block. with adb on my computer i have ? anauthorized and i have not a custom recovery, i am on lenovo k3 note. i want to install a cmw recovery but adb don't work and on my recovery i just have install uppdate.zip from sdcard 2. i think the sdcard2 insn't the my external memory card. and i have the official rom on my computer. how can i get authorized .? or how can i flash it ? i tried sp flash but without debug usb turn on there is nothing, the download don't start.
need help please.
Hello guys I have a real problem with my phone right now.
So I just follow this guide but get stuck on 'fastboot devices'.My pc detected the adb on command prompt but not on the fastboot.SOLVED,i just turn off windows driver signature enforcement and then the command prompt detected my phone.
Afterward I install my recovery succesfully even with some difficulties. Then after boot up my recovery & allow the modification my pc detected my phone but when open there are nothing in it.When I click the storage on MTP my device seem does'nt have any space just showing 0MB on Internal Memory. So I cannot flash the supersu nor the dm verity thus I cannot boot my device.The fastboot is still working and I have already tried this page twrp and official twrp but no luck. I also tried disable driver signature,try click on read-only on first boot twrp still no luck. I don't use adb and fastboot because I don't know how to use it.( You could guide me)
P/S: If you want any log please tell me. Right now I don't care anymore even with stock rom. Some one help me.
Try to wipe everything on twrp, data and internal storage included ... Maybe the data partitions is corrupt.
After wipe. Reboot back to twrp and connect the device to computer , you should see an empty drive from computer, but with correct size (make sure you use the latest TWRP by blu_spark)
theduke7 said:
Try to wipe everything on twrp, data and internal storage included ... Maybe the data partitions is corrupt.
After wipe. Reboot back to twrp and connect the device to computer , you should see an empty drive from computer, but with correct size (make sure you use the latest TWRP by blu_spark)
Click to expand...
Click to collapse
I did that and my phone turn on on white notification light.
Skrllux said:
I did that and my phone turn on on white notification light.
Click to expand...
Click to collapse
then you should start trying the following thread
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
try method 2
Skrllux said:
I did that and my phone turn on on white notification light.
Click to expand...
Click to collapse
Are you on stock oxygen os and were you trying to unlock your bootloader and flash a custom recovery? I didn't get your post right.
Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download either of the firmware from here
Download the support files (Firehose/rawprogram0.xml/patch0.xml) here
Extract the firmware and support files to the same folder so you can easily access them like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash individual partitions you can edit your rawprogram0.xml to only include the ones you want. (patch0.xml stays the same) I have linked below 2 examples, one of them flashes just a boot.img and one that just flashes the recovery.img. But you aren't limited to those.
Recovery
Boot
Mine just in case
Awesome, thanks for this post! it will really help us in upcoming projects!
Managed to revive my phone using the B12 files but it crashes after completing system.img, I think the problem is userdata.img, my phone boots but I lost the imei and I don't know how to get it back, I'm still trying.
ZTE 971 not recognized by either QPST or QFIL
Thanks for all the detailed instructions. But my ZTE 971 is not visible to either qpst or qfil eventhough the phone shows in windows 8.1. In the Developer Options menu, I noticed Select USB Configuration, RNDIS (USB ethernet) option cannot be enabled. I wonder if this has anything to do with it. OEM unlocking, USB debbugging are already selected. Any suggestions, please? Thanks.
ps. I live in Turkey. I got this phone last year from AT&T and have unlocked the sim.
My PC is not detecting my ZTE MAVEN 3
I have installed all drives but still facing the issue. I am using it on Windows 10.
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Mega says that link for the driver is invalid, but the driver is included in your QPST download anyway.
000Nick said:
I flashed the B13 (ZPST tool shows my device as B13) with the QFIL like your guide says and it says all completed successfully and finishes, but now my phone went from only being able to boot EDL + FTM + Recovery, to now booting directly to EDL mode, which obviously means this guide completely screwed up my phone... Thanks.
Click to expand...
Click to collapse
solucionaste hermano
Mod edit:
you solved brother
Click to expand...
Click to collapse
it says qhsusb_bulk when I connect the the software is not working in the mobile and it is stuck at bootloader screen but I used the press both buttons to go to edl mode method and it said in the device manager a device connected with name : qhsusb_bulk
help pls
Hello All.
I am not able to get the following files
rawprogram.xml and patch.xml for LG G8xPlease help me to get this files ASAP as i have hard bricked the mobile, all partitions deleted
So I installed magisk in my device via twrp, and was stuck in bootloop, after that i flashed boot.img via power shell and rebooted my device.
After that my device is unable to connect to Wifi, bluetooth, unable to transfer files via usb . Someone have any solution?