Related
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
I have the same issue. I was tryint to load Cognition and it just gets stuck on the ATT screen but I haven't tried a jig yet. I was wondering if I can replace the files on the phone with good files that aren't corrupted and see if it boots up because droid explorere can still pick up the phone and so does Odin but when I do a master reset nothing happens.
@rajasekhar - Have you tried: Removing all parts (battery, sim, sd) let it sit for a few min (my preference is around 10 min to insure no residual power is left in the system) then hold the jig in place and putting the battery back in? Keeping the jig in place, so that as soon as the device gets power it is immediately seeing the jig, before it can try any other processes.
A bit difficult to do with hand made jigs I know. If you still getting nothing then your in for the worst and the phone need a JTAG or service center visit.
Tho it sounds a little odd that it could boot up to seeing the AT&T logo, but does not respond to the jig. Might even be a hardware problem.
@i3oots - Since you say your still getting PC response your safe to try and reflash it or just pick something different altogether. Tho you might wanna let ODIN settle and just sit there doing nothing for a few min, w/o then w/ the phone plugged in. Or learn about Heimdall and go that route.
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
You have probably Hard Bricked your phone. A JIG will not work to recover the phone. If the phone has any life at all, then the JIG will work. Else, u hard bricked it...you should never remove the usb cable when flashing bootloaders or odin or anything!
the only solution is to get a JTAG which can recover hard bricks OR you can go to a warranty store (don't know about india) and make up a sob story and have them replace it..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
Does your computer recognize the phone? If odin is open, does the box turn yellow when you connect your phone? Make sure you have the right drivers. I think cm7 and captivate drivers are different. Keep trying with the jig. Just because you can't see anything on the screen doesn't mean the phone is dead.
i3oots said:
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
Click to expand...
Click to collapse
If your phone is booting up far enough to send out USB info for ODIN and other PC programs to see it, then your still in a workable condition. This also means you can still get into download mode, but since things arn't working properly it will be harder. Depending on which bootloaders your phone has will direct which methods you'll have to try out to get into download mode.
AFTER you've had a chance to look around the forum and self-educate on the different ways of getting into download mode. If your still having problems give us a lil more info of what you were running before the flash and to which version of Cog you were trying to flash.
Did anything worked for you, if not only a jtag can help you looks like u hard bricked the phone.
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
bricked maybe not
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU...... ................................................. I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cant find the original post
rajasekhar19489 said:
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
Click to expand...
Click to collapse
rajasekhar19489 said:
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Click to expand...
Click to collapse
If you just wanna know a bit about the process ask this guy. He is pretty much the only person in the US (I know not all to useful to a person in India) that does JTAG for the cappy.
I can tell you this much, it requires a special device called a Riff box and it sends boot info directly to the chip on the main/mother board that is used for the booting process.
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
malebornin69 said:
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU......
Click to expand...
Click to collapse
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
DaNaRkI said:
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
Click to expand...
Click to collapse
Thanx DaNaRkI .. hmm well i would now again start digging the threads for seeing wat u have suggested ..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
hello brother,,
u can find the Jig here in india... i also purchased... and it worked for me..
Download-Mode-USB-Jig
press thanx if it helps..
rajasekhar19489 said:
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
Click to expand...
Click to collapse
Hope it helps I wish I could find the original post again to thank the guy that told me how to do it. I had sent that phone back to att and the promptly sent it back and told me the water dammage sticker in the bat compartment was missing and they wanted to charge me 409 bucks for the phone ....long story short it was there when I sent it and I told them to go pound sand up their ass because I wasnt paying them that much and ended up paying 125 bucks for a paper weight.So that is when I decided to have it jtaged but figured I would give it one more shot before mailing it off. That was when I found the post from that person and low and behold it worked........................... I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cat find the original post
malebornin69 said:
Hope it helps
Click to expand...
Click to collapse
Buddy tried it ... Thanx for that..But dint help . Now going for another options i mean in search for other options
But ppl help me with JTAG thing and its users(or developers) availability in india
Forgot to mention
I Missed to explain my flashing procedure i have done this time . Like I never tried flash a boot file along and so was reading some threads about boot loader variations between FROYO and GINGERBREAD so i tried flashing ablong with boot loader and then I got the stock gingerbread file i put the boot loader SBL in heimdall Firstboot loader path .And Boom the first reboot got stuck and i removed the battery and then again when i tried to restart the phone is dead
Thinking this might have where the whole thing went wrong and made the cell dead .
I recently bought this Nexus off eBay and it worked fine.
Owner said it had problems with the SD card, but it seemed to be working, for they said it wouldnt read, when it does.
Anyway, it had cyanogen mod 6.1.1 on it, and I hate the setup...so i changed roms. That was a success, but when i flashed a sense rom thru clockwork(most updated) it said:
E:Error in /sdcard/N1Sensation_v0.4.zip
(Status 0)
Installation aborted.
Now, when i flash any roms, whether it says it installed correctly, it doesnt change anything. Now it's stuck at the 4 color x with the unlock icon. Any advice is good advice!
In my hboot, it says:
*** UNLOCKED ***
NEXUSONE PVT SHIP S-ON
HBOOT-0.35.0017
MICROP-0b15
TOUCH PANAL-SYNT0103
RADIO-5.00.00.04
Oct 12 2010, 14:33:16
HBOOT
Etc. Etc. Etc.
Thanks for any help!
Edit: I fixed the issue with why it failed, was my fault, didnt partition the card...but i was flashing a stock rom and it said complete and when i rebooted it stayed at the X and then powered off. Since then has never turned on. I don't know what to do. Nothing will turn it back on. I have a universal charger that charges the battery and it said the battery is full. I need help!
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Dude Random21 said:
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Click to expand...
Click to collapse
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
matistight said:
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
Click to expand...
Click to collapse
Try flashing CM7. Also...before you do...you may want to search for a format.zip from a member named temasek. It'll wipe your phone...clean. Real clean. Then flash CM7. try that.
also....those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
SiNJiN76 said:
Try flashing CM7.
those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
Click to expand...
Click to collapse
I can't flash anything. Phone wont react to anything anymore. Hoping one of my family members can fix it. But if I get it on I will try that.
I am pretty sure i waited long enough, but who knows. I didn't partition my card, which may have been the problem. And also it was S-On....which i thought was odd when it had a custom firmware.
Unlock bootloader. Flash recovery. Boot into recovery. Wipe everything. Flash rom.
Why do you guys keep suggesting software stuff when it's probably a hardware problem he can't get the phone to boot up so he can't do any of that.
Although there is one thing I want you to try before your family take a crack at it to take it apart and what not, it's a long shot but it's your last chance if it's software. Hold down trackball and press power keep holding trackball for another 5-10 seconds (better to long then to short) then connect it to the computer via USB you could see a popup notification saying that it's looking for driver software if you do then it's software and we need to reflash everything and might need to unlock the bootloader. Now if you don't see a popup notification I would still go check in the device manager and check for an unidentified device probably in other (it should be extracted so that you can see it).
If this doesn't work then sorry but I think it's a brick
Because in order to find out if its truly a hardware problem you need to try every software fix first.
Op mentioned nothing of trying fastboot as well. Software fix is free hw is not. That is why we suggest software fixes.
Sent from my Nexus S using XDA App
Let me remind you guys, THE PHONE WONT TURN ON AT ALL REGARDLESS OF WHAT I DO. I can post a YouTube video to show everything. It'd be very random for it to be hardware because it just turned off and will not turn back on. If there is any software like an RUU out there, that would help, if not, ill have to buy a bottom piece and warranty it out. But I'd feel bad because that isn't the right thing to do.
I don't expect you guys to fix it and I and very thankful of your help! But the phone won't turn on at all. So telling me to flash roms doesn't work. Imagine it as flashing a rom with the battery out of your phone. I am wondering if there's an adb way or something to get it to turn on and restore to stock?
With all that said, any help is amazing help and I am very grateful that this isn't a post I have to bump! Thank you so much, when I go on the PC, ill thank the helpful posts
Sent from my (finally) permanent root Sensation 4G
Then it is a brick if it won't turn on at all. The entire getting stuck at the x thing confused me to think it was powering on.
You have me confused sir, I'm not quite sure what good it is your looking for a RUU for. If the phone truly won't turn on/go past the X screen and you have it on a charger with no LED notification, then the phone is bricked. When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom. If you can still get to the bootloader screen then you are not bricked and should retry everything from scratch.
Thread Closed
xsnipuhx said:
When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom.
Click to expand...
Click to collapse
Sensation based, but it was a Sense rom
Confirmed it is bricked.
Sold on eBay for $100
Bought for $77
Semi-Winning.
Thread Closed
I am smart enough apparantly to get myself into trouble with flashing and rooting...I thought i had a pretty good grip on this till this happened.
I know you guys are working hard and my problems are small and silly in the grand scheme of things, if I missed something in my searches I apologize, I looked for hours and found one other post, but that persons issue was slightly different than mine. I own a Htc vivid ( holiday, raider) I was originally running the stock ICS ruu, I reflashed to the Pre-rooted ICS rom, it froze due to my "fiddling" with the font settings. I tried to flash back to the original ICS RUU, when the Prerooted version would not take on my phone. Everything seemed great until it froze at 34%. I have attempted to boot into recovery (volume - and power) and get nothing but the black screen with four triangles in the corners and the HTC logo in the middle, I am using the original USB cord, I have tried rerunning this from a few different computers with it only to get stuck at the 34% mark again and again. I would love to get back to ICS pre rooted again, but at this point I am close to tossing it in the microwave for a few seconds and warrantying the phone out. Advice? Suggestions?
I appreciate any help thrown my way, as I said I know you guys are busy making awesome stuff happen, and my problems are small by comparison.
Thank you ahead of time!
Another member was (could still be) having what sounds identical (RUU stopping at 34%). Not sure if he's gotten it fixed, I do believe TheCubed is helping him with it still, you might hop on IRC (Freenode, #htc-holiday) and talk to TheCubed when he gets on.
If you manage to get back into the hboot try to re lock your bootloader and it'll reset everything if memory serves me right.
Brand New said:
If you manage to get back into the hboot try to re lock your bootloader and it'll reset everything if memory serves me right.
Click to expand...
Click to collapse
other user with same issue - http://forum.xda-developers.com/showthread.php?t=1581902
might want to follow that. I don't have any suggestions at this point other than the last suggestion in that thread. IF you can get to bootloader, try relocking bootloader and running the ph39img that thecubed posted to restore to GB, then try running the RUU.
Did you try to run the RUU while you were unlocked???? You need to be locked to run the RUU
Could it also be a bad RUU download? I would try downloading the RUU again, from another server if possible, and see if it gets stuck at the 34%.
S7
I'm a complete noob in dire need of help. I wanted to root my phone, and read the 3 procedures mentioned in the sticky thread. The 2nd one (nvflash) seemed very well explained and was sure to work with 2.3.4 so I decided to use that. As I was in my friend's house I used his pc and installed the drivers while my phone was connected in apx mode. Then I double clicked the "install internal xp" batch file which resulted in a black window with some texts, but seeing this my friend freaked out and closed the window before the process was finished. I told him he shouldn't have done that. I then disconnected the phone and switched it on. It seemed to switch on properly. So I then switched it off again and pressed and held the power and vol down switches to see if I got cwm. This showed LG screen for a few seconds and then the screen went off.
Now whatever I try to do I can only see the LG screen for a few seconds and then the screens goes off. No power on, no recovery, no nothing. And I can only attempt to even power on once, after the screen goes off I must remove the battery before the power button does anything again.
I tried to freshly nvflashing the recovery many times, but it made no difference. Does this mean my phone is bricked? Please tell me how I can solve this as I'm really worried.
NVFlashing the recovery again *should* have worked. So we first need to make sure you're trying to start CWM the correct way.
1) Unplug phone
2) Remove battery for 10 seconds.
3) Insert battery
4) Hold volume-down, do not let go, keep pressing it.
5) Press power button, keep it pressed.
If/when you get the second LG-logo, bluish halo, you can release both buttons, not before.
Nope, that was exactly what I was doing to access the recovery. I tried it again just now and it didn't work.
It just displayed the regular LG logo and then the screen went off. I'm not sure the phone completely shuts down 'cause if I keep it like that it gets quite hot and I can't use the power button again to try to power up. Only removing and re-inserting the battery gives me another attempt.
Is there any chance this is a hardware issue?
Hardly any chance this is hardware related if it was working before the first NVFlash.
Good, next step will be to NVFlash a complete stock ROM. You will unfortunately lose any data you might have on it, but that's the price to pay.
Go here, follow the instructions precisely, skip installation of apx-driver. Report back.
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
sean8000 said:
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
Click to expand...
Click to collapse
It works, yes, but is the original Froyo. This is just a way to get the phone up and running again.
Later you have a few choices. Either install CWM, then install you ROM of choice, or upgrade it to the latest for your region by using the LG Update tool.
EDIT. Oh, and btw, it is better to open a command-window and type the flash.bat command. If there are any errors you will still have them on-screen.
Thank you for all the help and support. I didn't get a chance to flash the rom till now (being on a vacation without a smartphone sucks). But I'll try it asap and report back.
So, how did it go?
TrymHansen said:
So, how did it go?
Click to expand...
Click to collapse
I haven't flashed it yet. I've decided to do it after I return home. I'm at my friend's house for 2 more days.
Ok, bad news. I flashed the stock rom you linked. The process went pretty smoothly. After the window got closed and the lg logo on the phone was visible 2 times, I unplugged it and installed the battery. But switching it on wasn't fruitful. It just displayed the LG logo for a couple of seconds and then the screen went off (just like before, only faster). I tried repeating the whole process, even tried to nvflash cwm once again, but nothing happened.
So is it a hardware issue? My phone is no longer in warranty period, so a hardware problem would be really bad...
So is it a hardware issue?
Click to expand...
Click to collapse
I don't know.
What would be helpful is to get a copy of the output you get when you NVFlash, it's simply the only way to verify that the flash process went ok. If you have an aborted flash it of course won't work, and may display the behaviour you describe.
EDIT: Btw, early on there were some ROMs which refused to boot properly unless the baseband was of an early variety as well.
If you feel confident the NVFlash has been successfull, smartflash an old baseband as well, see if it boots then.
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
gabriel2anjos said:
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
Click to expand...
Click to collapse
Now what's this "Jtag service"? (edit- I googled it and it seems to be a method of un-bricking stuff with specialized hardware or something, but I'm not sure I can have that done where I live)
Is there any way to fix the bootloader by myself?
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
sean8000 said:
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
Click to expand...
Click to collapse
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
TrymHansen said:
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
Click to expand...
Click to collapse
Ok, I'll try that when I have the time.
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
sean8000 said:
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
Click to expand...
Click to collapse
If it is you're only the second person in this forum to ever brick his phone. Anything's possible I guess. Some flash cells may have been damaged the first time the power was yanked. But then we should presumably get some verification errors during flashing.
Anyway, I'm at my wits end, and I really do hope you get it up and running, but I don't have anything more to contribute. Good luck.
Corrupted bootloader means that your cellphone simply don't know what to do when you hit the power button, due to the damage. As the cell phone can't turn, the pc can't recognize it. If your cell phone were a samsung, you could try to use a jig to have acesso to the download mode. But I don't know if it would work for a LG. You could try anyway.
And if you live at big city, usually it's common to have some jtag services.
Please, dont be afraid of hitting thanks
Please, dont be afraid of hitting thanks
Ok, so I took the phone to the service center today. The guys there said its battery terminals are messed up. They said replacement terminals are not easily available, but they'll try to find some. And of course I'll have to pay for it. I guess it's still better than using the phone as a paperweight.
What do you guys think?
Good luck I managed to mess up my phone like you too. I'm from India. But the difference was that I was covered by warranty. I managed to get a bunch of hardware replaced and was up and running again.