Related
I am a n00b in the subject of unlocking phones to use on other networks etc.
Is there a possibility when the SPL is unlocked that we could use this on any GSM network since it is a 'world' capable phone with the GSM radio and a SIM card?
I have used a lot of WINMO phone son VZW and I flash and unlock quite often. Just had no idea how this process worked. sorry if this is a duplicate of any kind
thank you
You can call Verizon and ask them for the unlock code to your phone. The number is 1-800-711-8300, option 2 I believe. Either way you'll end up talking to a human who can do that for you. Then you'll enter the code (code A) in All Settings > Personal > Security. According to others, this unlock on the SIM will remain, even after flashing with a custom ROM.
no software to unlock the sim card, i don't want to call vz
I can buy unlock code for Imagio.
Why dont you want to call verizon? They are perfectly happy to unlock the sim for you as long as you dont have any problems with your account like delinquent payments. I called and had both of my phones unlocked in minutes and tested my ATT sim card, worked great on the aTT network
GSM 3G on america?
devlspawn said:
Tested my ATT sim card, worked great on the aTT network
Click to expand...
Click to collapse
Did you see if you had E or 3G or H?
I've looked at the specs but haven't found the GSM 3G bands that it has.
Just this:
Digital Dual (CDMA,PCS) /1X, EVDO /Rev.A <---- perfectly clear
GSM Quad Band (GSM/GPRS/EDGE) <---- perfectly clear
WCDMA / HSDPA / HSUPA <---- not clear if it has 850mhz here
I guess it doesn't have 3G in 850mhz but I still have hopes.
Regards!
I only get "E" - my SIM is 3G capable, but the corporate plan is text-only. In other words, I can't say for certain if it will get 3G speeds. HSDPA is available here in the US, so it should be possible for an Imagio to have 3G in the States.
I called yesterday, told them I would be going overseas, they gave me the unlock code. Simple as pie. I can use my neighbor's AT&T sim card without any issues minus stuff that is Verizon specific.
The SIM unlock was easy and successful. Just call Verizon at the above number and its a done deal in 30 seconds. Will try my wife's SIM in it later.....woohoo....
because i dont have vz wireless phone number, but i need to use the t-moible or at&t, i call them, but they need me vz wireless phone number... i dont have, they not unlock for me
as i was told u are able to get it unlocked verizon will do it if ur account is 3months old and in good standing... also as far as using it on gsm not sure as of yet but will say tmobile basic signal i E in an area where out of ur basic ntwork jumpin off of another tower it will put u on H or even G but there is no 3G
wingtytn said:
as i was told u are able to get it unlocked verizon will do it if ur account is 3months old and in good standing... also as far as using it on gsm not sure as of yet but will say tmobile basic signal i E in an area where out of ur basic ntwork jumpin off of another tower it will put u on H or even G but there is no 3G
Click to expand...
Click to collapse
H is HSDPA, which is 3.5G (faster than 3G... 7.2mbps compared to 1.5 mbps or something like that)
Edge is like 0.3 mbps and GPRS like 0.1
not really sure, but you get the idea.
Here in Mexico we have HSDPA but never get above 2mbps, at nights we do peak at 3mbps but avarage is still at much 2mbps.
Did I do something wrong?
I told them I was going over seas, I gave them my sim number and they said I was all set to go over there. Does this mean my phone is unlocked, I didn't have to put in any numbers. I will hate myself if I said the wrong thing. And if I did it right then how do I switch between sim cards and cdma?
For you phone to be unlocked they would have to give you a number to enter.
To switch between sim and cdma, go to settings -> phone -> network and change it from global mode to GSM
Razorfold said:
For you phone to be unlocked they would have to give you a number to enter.
To switch between sim and cdma, go to settings -> phone -> network and change it from global mode to GSM
Click to expand...
Click to collapse
Not true, works fine with t mobile and at&t, didn't enter any numbers did it all from their, weird, but whatever.
I think a few things from the last three posts need clarification:
1. When you call VZW Global Support, they should have given a security code to unlock the SIM. It is a string of numbers. It is not a phone number.
2. Once the SIM is unlocked, if a SIM is present in the phone, there is no guarantee that switching back from GSM/UMTS to Global will switch the phone back to CDMA. There have been times where I've done that, and the phone has stayed on AT&T (my employer uses AT&T). I think a better method is to use either CDMA or GSM/UMTS, and to avoid the Global setting completely.
Kebero said:
I think a few things from the last three posts need clarification:
1. When you call VZW Global Support, they should have given a security code to unlock the SIM. It is a string of numbers. It is not a phone number.
2. Once the SIM is unlocked, if a SIM is present in the phone, there is no guarantee that switching back from GSM/UMTS to Global will switch the phone back to CDMA. There have been times where I've done that, and the phone has stayed on AT&T (my employer uses AT&T). I think a better method is to use either CDMA or GSM/UMTS, and to avoid the Global setting completely.
Click to expand...
Click to collapse
On item number 1 I would agree with you ignore my experience because even my friend who unlocks all kinds of phones for metro says it is a weird case. I have never received any unlcock cod yet it says "sim security unlocked" probably will be screwed up if I ever want to flash or reset it but whatever.
On number 2 I can't agree with you because I bought an at&t go card just for sh**ts and giggles and I have no problems, infact I can switch between the two while the phone is on, done many tests. But if anyone else experiences this issue I would like to know.
I have never heard an unlock like that. But could be... like an 'on air update'... Most times is a code or the frown upon methods (connect it to a PC or a box).
If any one wants to know, no it does not have GSM 3G for 850mhz band, not 3G with ATT and others in the world that uses that band. Tested it myself.
medellinrob said:
I have never heard an unlock like that. But could be... like an 'on air update'... Most times is a code or the frown upon methods (connect it to a PC or a box).
If any one wants to know, no it does not have GSM 3G for 850mhz band, not 3G with ATT and others in the world that uses that band. Tested it myself.
Click to expand...
Click to collapse
Even if you run at&t 3g it is much slower than verizon's. Either that or safari renders slower than s**t on brother's Icrap 3g. T mobile's is faster if you can find their 3g coverage, good luck.
PS I am still looking for internet connection settings for tmobile as I sold an unlocked imagio to my buddy and he can't get the data connection working.
does anyone ever solve de 3G problem with the 850 MHZ band... I live in Venezuela use movistar i ve the imagio sim unlocked can´t get 3G due to band restriction
Hi everyone,
I am trying to find out if anyone in the UK on o2 is able to see "3G" on there notifcation bar at the top?
I have been trying to find out for a while and have recently changed my sim card to a 3G as i have had mine for ages and was still an old 2g one!!!!!!
Since swapping I still only see G all the time while downloading data. Does it actually change to 3G when its available?
My current settings are:
o2 mobile Web Post Pay
APN mobile.o2.co.uk
Username: o2web
Password: password (i think!)
APN Type: Internet
Any help would be great
Regards Jim
Well when I'm inside I get HSPDA, I some times see the 3G logo, not often, but HSDPA is better anyway, when I have a decent signal or it drops to edge, but outside I always get it, It could be due to lack of a decent signal?
Make sure in Mobile Network Settings you have Network mode set to GSM/CDMA (Auto Mode)
My Internet settings are the same as yours
So you actually see a 3G logo then.........humm
I checked my network settings and mine are on auto as well.
Im wondering if there something wrong with my phone????
The only reason I say this is because my m8 is on 3 network and when were next to each other he can pick up a 3G signal and I cant. I find it hard to beileve 3 has better network in my area. Specially I always have a 5 bar signal.
Cheers for replying
Regards Jim
Benson881 said:
So you actually see a 3G logo then.........humm
I checked my network settings and mine are on auto as well.
Im wondering if there something wrong with my phone????
The only reason I say this is because my m8 is on 3 network and when were next to each other he can pick up a 3G signal and I cant. I find it hard to beileve 3 has better network in my area. Specially I always have a 5 bar signal.
Cheers for replying
Regards Jim
Click to expand...
Click to collapse
Have you checked your signal on the o2 post code checker? I wouldnt bash three's signal thinking o2 is better! as 3 network share nearly all 3g sites with tmobile now and have really good coverage so dont use that as a president.
Also best to try your sim in a unlocked/o2 phone in an area that you know gets signal like the o2 shop. Also i didnt think any network needed new sims for 3g apart from orange with the strange usim!
I see both H and 3G.
Yeah i needed a new sim. Got mine about 4 years ago and was told i had an old 2G sim. I didnt know they updated sim cards !!!!!
Ill check the postcode checker on the website and will probably go to the o2 near me. Hopefully Ill pick it near there.
Im not overly bothered about having it where i am, just want to know it works ok.
Regards Jim
Hi All,
I am starting a new thread for India specific networks on the Bionic.
I am new to this so please don't mind if i write anything stupid which i may haven't understood yet.
I got my Droid Bionic running on Stock ICS from States to India and inserted a couple of GSM sims which worked fine for a while without any tweaks. I used my device for one whole day(made calls didn't test data) and when in the morning i woke up there was no network. At that time in *#*#info#*#* it was showing as detecting network but as soon as the location updated, GSM would show out of service.
What i have done so far:
1. I flashed Eclipse ICS v 1.2 ROM and got network though very weak but couldn't make no calls.
2. I got ICARUS HD - 1.6.1 and applied the tweaks as mentioned in phone and got network stength increased but still no calls but a strange thing happened when i tweaked with build prop editor running ICARUS HD, when i changed to WCDMA Preferred and turned radio off and on it registered on the network gave full strength and GSM: showed in service as well, though this was only for 10-15 seconds and i couldn't test call.
3. Now I'm running CM 10 - released on Jan 18th and to my amaze I can use 2G Data though GSM state is Emergency Calls Only.
Following might be helpful to understand:
Current Network: TATA DOCOMO
Signal Strength: -99 dBm 5 asu
Neighboring CID: Unknown
Cellinfo: Blank
Roaming: Not Roaming
GSM Service: Emergency Calls Only
GPRS Service: Connected
Network type: EDGE(Also shows EDGE2 at times)
Message Waiting: False
Call redirect: false
Call Status: Idle
Preferred network type:
WCDMA preferred
I have changed to gsm only, gsm auto and all others applicable to no help.
I am trying to run my phone in India on network: Tata Docomo which probably operates on 1800 or it could be 1900 on 3G.
One thing which i am sure of now is that this phone certainly has all GSM capabilities and its some tweak which is required which i cant figure out. I have personally seen my phone making calls and now its running data as well.
Please help me on this!
Seems like settings changed with build prop to run on T-Mobile or AT&T dont seem to work for networks in India. Tmobile operates on 1900 and Tata Docomo on 1800
One thing which wont let me sleep is that why did it run perfectly at first and why did it fail if i did nothing to it. Can the network block the IMEI or something of that sort happened. It's been two sleepless nights for me now, now praying to the Radio God!! LOL!
Did you manage to get it to work? You might be right in thinking that it might be related to IMEI. Did you try and find out if the IMEI is considered valid by your operator since this is not a true worldphone its IMEI might not be in their database?
uhm said:
Did you manage to get it to work? You might be right in thinking that it might be related to IMEI. Did you try and find out if the IMEI is considered valid by your operator since this is not a true worldphone its IMEI might not be in their database?
Click to expand...
Click to collapse
Didn't work. I had to give up on it. There was actually no way in which i could get it checked with the network.
I sold it off on Craigslist last July!
I now have bought another one to test. Waiting to get back to India to test it again.
Not all bionic works with gsm, only wcdma. It's HW A after 36/11 and HW B
texan_mirage said:
Didn't work. I had to give up on it. There was actually no way in which i could get it checked with the network.
I sold it off on Craigslist last July!
I now have bought another one to test. Waiting to get back to India to test it again.
Click to expand...
Click to collapse
It's quite interesting that it did work perfectly initially and then with CM10, the data worked. Did CM10 rom include its own radio as well?
I found something interesting in this thread (not related to Bionic):
http://forum.xda-developers.com/showthread.php?t=945312
Good luck with your new Bionic! Does it work okay with GSM carriers in the US?
I finally got to try it and unfortunately it didn't work for me. Mine is HW A '12 Bionic and I am on ICS. If I go outside my house and search for networks, I get to see only one network(not mine). I see extremely weak signal in the phone info screen and also it shows gsm out of service. I tried 3 sims from different operators. Inside my house, nothing ever shows up. In other phones, I get to see many operators. Seems like it's definitely a signal strength issue if the gsm 900/1800mhz and wcdma 2100mhz bands are not locked. I'm not sure at this point what is the real cause. I even tried flashing just the radios from GB versions as complete downgrading is supposed to brick the device. Needless to say it didn't help. I'm still investigating and experimenting.
uhm said:
I finally got to try it and unfortunately it didn't work for me. Mine is HW A '12 Bionic and I am on ICS. If I go outside my house and search for networks, I get to see only one network(not mine). I see extremely weak signal in the phone info screen and also it shows gsm out of service. I tried 3 sims from different operators. Inside my house, nothing ever shows up. In other phones, I get to see many operators. Seems like it's definitely a signal strength issue if the gsm 900/1800mhz and wcdma 2100mhz bands are not locked. I'm not sure at this point what is the real cause. I even tried flashing just the radios from GB versions as complete downgrading is supposed to brick the device. Needless to say it didn't help. I'm still investigating and experimenting.
Click to expand...
Click to collapse
Hi,
I have now tried everything possible with the Bionic to run it on GSM network in India but it has failed to respond. I tried both hardware versions and can confirm that it is not registered as a world phone like most of new Verizon devices.
The worst thing which still bothers me is how and why did it work once(Yes, I made and receive calls on Docomo network in India). It will still show network strength , detect network but not register. I cant find no answers to it and have given up on this. The model is now obsolete and is clearly not a world phone in my dictionary but I won't deny it having GSM capability having seen it work personally. I have finally dumped the other bionic as well.
Good luck with your experimentation though!
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
With kit Kat on my vzw x, when I put my T-Mobile Sim in, I must manually enter T-Mobile APN settings to get working data and SMS. I haven't tried MMS.
With 4.2.2 Roms (version that the phone came with plus camera ota) APN settings came down automatically.
I get h+ in refarmed area.
landale said:
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
Click to expand...
Click to collapse
I thought the VZW Moto X only supported Band 13 LTE?
binary visions said:
I thought the VZW Moto X only supported Band 13 LTE?
Click to expand...
Click to collapse
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
landale said:
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
Click to expand...
Click to collapse
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
binary visions said:
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
Click to expand...
Click to collapse
Most of the upper level Verizon LTE phones released this year save the HTC One support band 4 either out of the box or will get a software update for it. Verizon is supposed to be making a big push over the next few months to add band 4 LTE service which is much needed here in Houston as our band 13 LTE service is so overloaded that sometimes I am lucky to top 3-4mbps.
Quite possible that Band 4 support was added in one of the updates that was pushed out, so most documentation wouldn't reference it. Best place to check would be the FCC docs when they tested the phone.
fyrmd said:
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Click to expand...
Click to collapse
I put a T-mobile SIM in my stock 16GB Verizon Moto x. Here is what works and doesn't.
First off, 4G works! in the South Jersey area and it is Blistering fast, I have exceeded 40MB speed test downloads twice, Several in the high 30s and I am avg in mid 20s. Uploads are averaging 20+/- . Compared to Verizon this is like comparing Fios to 1999 era dial up. the best I ever got on Verizon 4G was 14 download but average between 4 and 9 !
The Network notification switches a lot between 4G, "H" mode, whatever that is, just bars and another which I didn't catch quick enough to read ?
Battery has been amazing compared to my galaxy Nexus, I got 7.5 hours of Actual "Screen on Time" which included some GPS use and an hour of music streaming total phone up time was 34+ hours. How long it will perform like this is anyone's guess, today i got about 6.5 of Screen on time. I hope this inst a trend
Now for the bad news - Using it as a Phone. Incoming calls are fine but, making outgoing is a Pain in the A$$.
When I dial a number, (which is a hassle on this KitKat dialer) it often goes to the home screen or back to the dialer. The Call Fails. I am not sure if my dialer is buggy or its a compatibility problem. the KitKat Dialer on the Moto X is an exorcise in futility. Google are you listening? Why reinvent the wheel. All I want in my Dialer is a Number Pad! and a phone book.
When I Open dialer I see Recent calls up top, the whole middle section says all contacts and is otherwise blank, the bottom has the number pad icon, History and settings dots.
Clicking the number pad icon enlarges the bottom section, which then goes all white and removes the three icons. I have to then click the back arrow and re-click the number pad icon to bring it up the actual dialer. .
At this time I can dial. and then the call always fails on the first attempt. Sometimes it takes several attempts to go through.
When I click send on the dialer the 4G disappears and I am left with just the bars. they come back when call is done but sometimes take a few minutes to do so.
If you Kill the dialer app or swipe it away, coming back to it you will have the same issues when trying to get the number pad (two attempts) if you dont, the number pad will open on first attempt. but the calls will still fail on the first try.
I also cant use the internet when in a call, whether WiFi is on or off. Is this a T-mobile problem? I could use the net in Verizon when in a call when on 4G or WiFi
The Data is set to global mode but I have tried both the other settings. On boot up I get a warning saying the SIM is not recognized which I just swipe away.
I am also having this problem. After making a call, the music player and the phones "volume" aspects cease to work., Meaning, I get no sound out of the phone, Music, notifications alarms etc.. This happens almost every time and the only fix is a reboot
I disabled all Verizon Bloat and a lot of Moto Bloat as well This could be causing some of the bugs? But i have tested several different configurations all with the same outcomes.
Hope this helps and puts an end to the - Will it work or not questions. There seem to be a lot of Net Know it all's that flat out say a Verizon Moto x wont work with a T-Mobile SIM or some other undocumented "fact"
Would a verizon sim work in a sprint or T-moblie phone?
I popped in my T-Mobile Sim card and I only get hspa+. I definitely live in a LTE area. Hmm...
Sent from my XT1060 using Tapatalk
im from india i got moto x navy blue customized but device wont get signal dont know whats wrong tried to reset still no luck even getting the signal but instantly disappears and showing emergency only
So, I have a Verizon Moto X and popped in my T-Mobile sim card today and LTE popped up after a few seconds (I live in Boston). My LTE speeds on the internet worked instantly. However, I tried to send a text message and it wouldn't send. Not sure if I need to do anything else to get voice/text to work fine. Any ideas?
if you're on 4.4, you need to manually add APNs
Kittiesoncrack said:
if you're on 4.4, you need to manually add APNs
Click to expand...
Click to collapse
I just popped in the T-Mo sim card again and now text works no issues and calls. Not sure what happened, but oh well.
Now, is there any difference in me using a Verizon Moto X on T-Mobile compared to an AT&T Moto X on T-Mobile. I have both and have been using an AT&T one, but I am just curious.
NickB2008 said:
Do you know where I can find the APNs to fix this? I know how to access it on the phone, but just so I can find it.
Click to expand...
Click to collapse
http://support.t-mobile.com/docs/DOC-2090 <- That should have everything you need as far as the APN goes.
Guys I have customized Moto x but the gsm doesn't works not Able to connect network even im added apns what could be issue
Sent from my XT1060 using xda app-developers app
I fixed my issue. I ported my number into a Verizon unlimited data plan. Problem solved.
Sent from my XT1060 using Tapatalk
Any help guys how to unlock gsm I can see gsm sim getting signal and immediately loosing and showing emergency only what could be issue
Sent from my XT1060 using xda app-developers app
kae9797 said:
Would a verizon sim work in a sprint or T-moblie phone?
Click to expand...
Click to collapse
no because the sprint x is sim locked and doesn't use the same cdma setup, and the t-mobile doesn't support cdma/evdo that verizon uses for voice and 3g data
So on Monday ATT decided to deactivate my sim card because they believe my phone is incompatible with their network now. All my bars went to 0 with an x on it and I couldn't do anything on the phone. I went to an ATT store, got them to give me a new activated sim and I put it in my phone and all my bars came back.
My phone says VoLTE again too by the signal bar area. I also tested a text and it went through fine. I received a phone call and while it works fine, it sounds like junk now. Like it is no longer actually using VoLTE like it always has. My phone doesnt seem to have any data however, when it should have LTE just fine. I also cannot make any calls, even though it says VoLTE on the phone, it just re-routes to ATT customer service instead of going through with the call.
When I go into the network area in settings it says no IP address either. I looked and my APN is set to nxtgenphone, Preferred Network Type selected on LTE. Before ATT deactivated my sim card LTE has always worked fine, and LTE should still work fine. It is only the 3G network being shut down. Also given the fact I have the VoLTE icon the phone is apparently connecting somewhat to an LTE network.
So does anyone know how to fix settings to get data working again? Is it just an APN that needs to change? What is everyone else doing with the network shutdown and has anyone else had issues like this?
I had the exact same issue, your issue is in fact APN settings I'm having them as well. Try deleting your current APN and putting in a new one. Once I got a new sim my APN reset I could call but no data and no text. I have half of the APN information in place and have data and basic text, but once I input the MMS port the APN data disappears still trying to figure that out. Not sure if anything I typed is helpful but at least you know your not alone with a mi11 on ATT and it can work
EniGmA1987 said:
So on Monday ATT decided to deactivate my sim card because they believe my phone is incompatible with their network now. All my bars went to 0 with an x on it and I couldn't do anything on the phone. I went to an ATT store, got them to give me a new activated sim and I put it in my phone and all my bars came back.
My phone says VoLTE again too by the signal bar area. I also tested a text and it went through fine. However, my phone doesnt seem to have any data, when it should have LTE just fine. I also cannot make any calls, even though it says VoLTE on the phone, it just re-routes to ATT customer service instead of going through with the call.
When I go into the network area in settings it says no IP address either. I looked and my APN is set to nxtgenphone, Preferred Network Type selected on LTE. Before ATT deactivated my sim card LTE has always worked fine, and LTE should still work fine. It is only the 3G network being shut down. Also given the fact I have the VoLTE icon the phone is apparently connecting somewhat to an LTE network.
So does anyone know how to fix settings to get data working again? Is it just an APN that needs to change? What is everyone else doing with the network shutdown and has anyone else had issues like this?
Click to expand...
Click to collapse
moswen said:
I had the exact same issue, your issue is in fact APN settings I'm having them as well. Try deleting your current APN and putting in a new one. Once I got a new sim my APN reset I could call but no data and no text. I have half of the APN information in place and have data and basic text, but once I input the MMS port the APN data disappears still trying to figure that out. Not sure if anything I typed is helpful but at least you know your not alone with a mi11 on ATT and it can work
Click to expand...
Click to collapse
Thanks for the reply. I tried deleting the MMS port and also the proxy just now and data didnt come back. I will try searching around for more APN info for how phones are supposed to connect now and see if I can find anything.
It looks like from what I could find that it is due to an IMEI whitelist ATT has, blocking data connection on any device not in their whitelist. The solution seems to be to root the phone and change your IMEI to a whitelisted model.
While my phone is rooted my IMEI is not cloned I definitely would not share my IMEI with ATT. When I got my sim card yesterday I had the attendant activate but I did not provide my phone so he did not get the IMEI from my phone. If you got a sim and they input your IMEI that could be a problem possibly. Just a suggestion to try and get a sim activated at a store without your phone.
I had also heard that most ATT MVNOs were not having the device whitelist forced on them yet, so I went and tried 2 different ones yesterday. Both failed to get the phone working on their network with their sims.
Before I went through the hassle of rooting (and most likely losing payments) I tried ATT again anyway. I used their online customer service chat and the first person I chatted with said he could help me with the lte data problem and the IMEI issue. I was skeptical, but he actually did fix it all up. He just needed my sim ICCID and my phones IMEI1 and he submitted the info to their backend people for adding to their system. It took almost an hour and a half for it to get added, but overall it was a pretty painless process and I was browing the web most of the time while waiting in chat. I now have LTE data again, VoLTE again, and "5G" too (which ATT 5G is really just one or two more features than normal LTE and is no faster in speed and uses LTE data bands). I attached a screenshot showing the data and VoLTE working on my phone. The first signal is ATT, the second is TMobile (which has always worked and never had an issue, their 3G network shutdown is going on for another 4-5 months)
EniGmA1987 said:
I had also heard that most ATt MVNOs were not having the device whitelist forced on them yet, so I went and tried 2 different ones yesterday. Both failed to get the phone working on their network with their sims.
Before I went through the hassle of rotting (and most likely losing payments) I tried ATT again anyway. I used their online customer service chat and the first person I chatted with said he could help me with the lte data problem and the IMEI issue. I was skeptical, but he actually did fix it all up. He just needed my sim ICCID and my phones IMEI1 and he submitted the info to their backend people for adding to their system. It took almost an hour and a half for it to get added, but overall it was a pretty painless process and I was browing the web most of the time while waiting in chat. I now have LTE data again, VoLTE again, and "5G" too (which ATT 5G is really just one or two more features than normal LTE and is no faster in speed and uses LTE data bands). I attached a screenshot showing the data and VoLTE working on my phone. The first signal is ATT, the second is TMobile (which has always worked and never had an issue, their 3G network shutdown is going on for another 4-5 months)
Click to expand...
Click to collapse
Happy you are back up and running and I'm glad that you found someone at ATT to do the fairly easy work of getting your IMEI cleared. Lots of people have been worried about devices not working on ATT because of this whitelist issue glad to see there are workarounds just wish ATT didn't make it so convoluted.