Hi All,
I have been struggling with my MX head unit for a month now, i cant bring it back from Brick. I have tried every software available, i have flashed every MCU you can think of. Im trying to connect the thing to a pc to write firmware using RKpatch tool. Does any one know how to connect it? I dont have an OTG port but i have 2 USB ports on the back, i have connected the cable and have tried every possible sequence its not seen by the computer. I have taken the unit apart to find the short pins Nothing.... i really need help..
Related
Hey there
My phone has been connecting perfectly fine since I got it about a year ago right up to a couple of days ago.
I've just changed my contract and wanted to unlock the phone. However, before I could even go about doing I discovered that my computer (Vista 32bit) was no longer recognising the phone.
When I plug it in it does charge but the computer gives no reaction. Even when I put the Kaiser into bootloader it still says Serial instead of USB.
I have tried disabling enhanced network functionalities on the phone, I have reinstalled Windows Mobile Device Center, I have hard reset the Kaiser, I have used multiple USB cables and multiple USB ports (all of which work with other devices).
As a result of the hard reset I have now lost the majority of my data. It's all backed up on my computer but this isn't much use when it refuses to recognise the phone!
What can I do to fix this?
Any help would be very gratefully accepted!
Cheers
McAsh
I would try it on a friends XP machine or a friends Vista machine. Try to narrow down if it is the phone or your PC , and then proceed from there.
HI!
I have the same right problem!
The only way i can do activesync is connecting the phone in activesync by bluetooth and the sincronization is fine, but i need to put HardSPL in it and i need that it can be recognized by USB connection and my Kaiser is only charging from USB, it is not being detected by the computer.
PLEASE HELP!!!
Thanks!
had same problem
no one help, I started a thread and no replies
till today I plugged my kaiser to usb and computer recognized and synced
I was using bluetooth to sync for a couple of months
I really didn't do anything to fix this first I thought it was usb connection but it wasn't because I was able to put new rom thru the usb so connetctoin was there when the phone is in the hard reset mode. WEIRD ha
mostly these things comes down to 3 reasons
1. defect usb connector in the ppc
2. corrupt activesync install full uninstall and clearing registry of the pc should fix that
3. issue with usb port chipset drivers for on the pc
Also having a similar problem.
My computer recognizes my Kaiser as "HTC USB Sync" in the Device manager but nothing more happends. Could it yet be the phone USB connector that is broken? Also I was able to flash the rom yesterday (from bootloader).
When plugged in, my phone totally freezes and becomes available again the moment I unplug it and by then starts "connecting to host".
If I uncheck the "allow usb connections" box in WMDC the phone is workable but very juddery.
Have tried to completely uninstall WMDC and reinstall it again with no success whatsoever.
Any tips or is my only solution to buy a bluetooth-dongle?
The solution for mine is really the repair center unfortunately!
It really seems to be a hardware problem in the USB connector, i can't even change a firmware, the pda simple isn't recognized by the computer :S
Anyway thanks for the help!
Regards!
I am also having the same problem!! My question is how do you use bluetooth to sync with the activesync(not too computer saavy!!)
Check the usb connection on the phone. It may have a contact pushed over or broken
I got the same sympton.
I can get my phone to sync by pushing the USB connector harder towards the phone. Yes, it is connected already, and it is not lose, and the PC recognise it as HTC device in Device Manager, but it is just not detected by the (Vista) Windows Mobile Device Center
If I keep pushing the usb connector in (towards the phone), then it would get detected and start syncing. If I relax my hand and stop pushing, the active sync connection will drop immediately (still detected as HTC USB device in Device manager though).
Therefore, I have to keep pushing it in to have a successful sync. I don't dare to flash the firmware anymore... :-(
P.S. I am using the official O2 WM6.1 firmware, and using the original USB sync cable. I noticed that the original USB cable's connector head is a bit longer than ALL my other USB cable's connector head (the mini USB head).
Originally I didn't need to do the push in for the phone to get recongised, so I figure it is some sort of wear and tear on the phone's connector... :-( This does put me off in purchasing another HTC phone, because the new one is likely to suffer from the same wear and tear...
btw, before the connector got that bad, when it was connected but not synchronising, I could get it to sync just by launching Windows mobile device center (which is a different program than sync center in vista); and of course, when it was all brand new, I just need to connect the phone to the PC via the USB cable, and everything happened automatically...
I am trying to flash my first rom and the computer would not detect the phone. Took a look at the female mini USB socket on the phone and the 3rd pin out of 5 was much lower. Took a tiny screw driver and pushed it up and I got success. Its a little sensitive but if you dont touch the phone it will work fine.
Good luck
Jason
HI gdarrenc!
The way to sync it via Bluetooth is when you open the activesync in your pda, in the options menu you have the option to sync via bluetooth
Regards!
possible solution if feeling brave
My hotsync failed a few days ago, did the usual searches and posting on here with no joy and then did a google search for a picture of the mini usbport.
on inspection of mine in comparison i noticed the two leftmost pins were down to the point they were in the sticky out black bit so with a pair of my wifes best precision tweazers i flexed the black bit down slightly and slid the tweazers to the right lifting them up slightly. as soon as retested it is now working again.
NOTE BE VERY VERY GENTLE WHEN DOING THIS - DO NOT USE ANY FORCE
my guess is this is due to an ill fitting usb cable as mine had a certain degree of up and down flex when connected.
hope this helps someone.
I am also having issues with pc-htc connection.
But, this happened when I pulled the usb out of the phone with my leg.
Now, I squezzed usb head a little, and it works fine.
Hi, ive got little problem, maybe i turned something off, or i dont really know. When i try to connect my phone via usb cable into PC nothing happens, its only charging my phone, its not communicating in any way with PC. i've tried several usb cables but with no success. even the charing cant be turned off, when i press do not charge while connected (or whatever it is) nothing happens, and it keeps charging. ive got dutty's rom (but dunno which one, its the one with HD2 manilla)
thanks a lot for help
Hi.
is the usb connections menu appearing when you connect the device to PC? (on your TD2..where you can choose between Activesync, Hard Disk mode and Internet sharing..). USB connection used to work and stopped after something was installed? Try to reinstall Activesync or Windows Mobile Devices Centre in your PC (depending on you OS) or, as a last resort, hard reset your phone (backup your stuff !). I would also try to connect it to a different pc, just to be sure..Be also sure that the following options in Start/Settings/Connections/Usb to PC are:
Activesync [checked]
Fast data synch (or whatever it is) [checked]
Put a checkmark on the last option if you want this menu to come up every time you plug the USB cable.
ive tried it on several PCs but no success, so its not PC problem, no tab of choosing which type of connection to use appears. Like it's only charging, not communicating with pc i guess that i need to hard reset it >.<
hard reset didnt work, still no connection between pc and phone, i dont know what to do >.< hope that its not hardware problem. any ideas ???
same thing happened to my D2. i had to send it in for a repair
that's what i was afraid about,,, HTC warranty service here in svk/cze is not-so good as i've heard. And another problem is that i have cooked ROM on. With usb not working there is no f-ing way to get stockSPL back . Wonder if they repair it, or if i would have to pay
You can flash stock rom through SD card, about sspl I´m not sure.
so i guess the phones from svk/cze have fulty usb ports because mine was also from there. the thing with me was that i live in USA so i had to wait for them to get the parts and they scratched my phone so i had to send it in. i got it back then the screen was scratched. i had to send it in again and when i got it back the camera didn't work. i argued with them so much that they just gave me a new one.
all right, I recently received my phone back from repair shop (screen was damaged) and I've left my original Samsung data cable at my mums place for her to charge her Nokia and I've ordered a new spare one from Amazon for £2.
When I try to connect to the PC, I can browse my folders and copy stuff to and fro from the phone, but the only problem is that Kies doesn't recognise my phone when connected in Kies mode. it says connected on the phone, and connecting in Kies, but never connects!.
I've reinstalled Kies, Samsung drivers, and even Windows Media Player! rebooted my laptop and phone number of times, and still I cannot connect. Also, from what I can remember, when I connected my phone to laptop, it would have installed USB MTP driver. now when I connect it, it doesn't install it. I don't have an USB MTP driver, but I've installed SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe drivers.
Is this cable fault or is Kies acting weird? I suspect its cable fault. What do you guys think? How do I connect my phone to Kies?
As far as I remember, Samsung requires you to use the original cable for use with Kies. I don't know how they detect ist, but they do check. I suspect this to be your problem.
Solution: Call your mum and ask for a cable exchange
Hi, thanks for your help. Can someone link me to a store which sells data cable that can detect phone in Kies?
thanks in advance.
anyone with any info on the cables?
re
hi there i had broplems with my phone and checked usb cable properties to get my phone working.
Noticed that nokia usb cable aint using pin 4 or 5 so you shuold get a cable with every pin in use.
err.. what? that didn't even make sense to me.
I was asking if anyone knew any online retailer who could sell me galaxy s cable so that it could be used with kies?
surely someone knows where to buy an original cable!
So the story is that i got a samsung galaxy note 5 (n920i) with a broken screen from my sister and it worked fine before. A year later i fixed the phone and wiped the files, cache and stuff i noticed that it did not charge with my aftermarket charging cable (battery was at 0%). I thought the cable was screwed so i used an official samsung one and it started charging. once it started up i did all the startup installation process and such but then i noticed that it would not use fast charge (i have an official samsung fast charge socket) even with the fast charge setting on. so i thought to plug it into my pc but it does not recognise it at all. (device descriptor request failed every time) I used many different ports on my pc and laptop, used many aftermarket and official charging cables, i even used it on devices like the gear vr and a docking station and they dont recognise it either.
I found a post saying to push up the tongue in the charging port which did not fix it, i tried all such drivers and fixes thinking its my pc and/or laptop but no luck, like i said i even used devices like docking station and gear vr and both dont recognise it either. So i just thought it may be the charging port its self and purchased a new one to install(i also got a new battery just incase) . After replacing both the charging dock and the battery successfully it still does not work on my pc nor does it charge properly. it is running on the newest update out right now.
edit: I also lost the little white signal cable for the antenna while replacing charge port but i have purchased a new one and its on the way. (if that causes an issue)
I have tried using samsung kies and smart switch with drivers and it does not recognise it either
I dont know what else to do can someone help me figure it out whats wrong.
Thanks
I have the same problem.
Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.
arturroch said:
Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.
Click to expand...
Click to collapse
Thats exactly what i think but i dont know how to flash it without a pc
i have same problem...
problem usb unable to recognized
currently my note 5 no os installed, i try flash stock rom using odin but usb not recognized. i also try pendrive otg also unable to detect the pendrive
Hello does anyone else have a problem with the Mi 11 connecting with a USB? I have the Asus Prime Pro X570 motherboard with mutiple USB ports, 2 usb ports on the front of my Corsair 5000X and every port apart from 2 will only charge the phone. The two usb ports connected to the ethernet rail the phone constantly connects and disconnects and the select file transfer, no action etc on my phone literally flashes and has seizure.
It can't be the cable because it works on other PCs. Also tethering works through USB. It's only when I'm trying to access the phones files?
Hello I Have the same Mainboard with the same problem and what can I say... For me the solution was an other pc to unlock the bootloader and flash a cfw. Then tested on my main pc and still nothing. Then tested my three other USB cables and with two it worked.
I have no idea why that is a thing. Maybe the Mainboard USB problem that had to be patched since 1.2.0.0?
sweatbox said:
Hello I Have the same Mainboard with the same problem and what can I say... For me the solution was an other pc to unlock the bootloader and flash a cfw. Then tested on my main pc and still nothing. Then tested my three other USB cables and with two it worked.
I have no idea why that is a thing. Maybe the Mainboard USB problem that had to be patched since 1.2.0.0?
Click to expand...
Click to collapse
Hmm I guess I'll have to buy another cable, seems weird though thank you
Hi ! Same problem here, with an Asus B450 Tuf Gaming motherboard ...
lejailleur said:
Hi ! Same problem here, with an Asus B450 Tuf Gaming motherboard ...
Click to expand...
Click to collapse
Maybe it's an Asus problem but I brainstormed and was like wtf it's android. If you need to transfer files you can use an ftp client and do it over WiFi, but it still sucks cause I can't flash anything
I had the same problem but after I connected the phone to a 3.0 USB port the problem solved instantly.