Related
Hello , I'm using C503 , ROM Custom Exitenz 1.0.5 Black Edition based on stock kernel , blocked bootloader. I have some problems on my Xperia SP I try to solve myself but no succes . I hope you will help me
1) I'm using the recovery of Philiz , the CMW Touch and I have make backup , I can't copy the backup on my computer . I have find the folder /media but I can't access with my computer because is not in the internal memory but in internal Sd . So , I have change the conection usb MTP to MSC but the computer don't regonize the mobile ,.I have try many times that didn't work . So I mount usb in recovery but that don't work i click on mount usb but that don't work ...
2) I've a problem of RAM , i have only 100 mb of free ram if i open some applications my phone strike and bug . I have lot of unnecessary applications as Facebook , Air Android I don't want these applications work i background ,... For that I have find auto start and I have configurate but that don"t work they application "not allowed "work even if I select to not start in the boot . So , I need to use Clean Master clean the Ram , use fast reboot and that free more than 250 mb of ram it's lot but i can't clean ram every hours to use my phoen if someone have a idea for me . I haven't waste application I use very appication mostly GO SMS PRO , whatssap , menssenger Facebook
3) I've install the Xposed Full Screen Call Picture and that don't work the framework all ork properly but not this module don't work .
4) Also since I have install this ROM I don't know if it's a real problem but when my pohne boot I have 2 vibration my I haven't the 3 coulours as before I don't know I have make many time fresh installation for other reasons but I haven't the 3 led on when the phone boot , it's just strange ...
5) Why you must trim a photo if you want to use in backgroudn screen of you phone .It was the same in all Xperia . Someone have a idea to get arround this obligation ??
6) I have a PROblem of battery , indeed my phone unsing is music 2h , whatsapp 2h wifi and 3G , SMS 100/days , 1hour call anything more . I have see i can't leave my phone conect in 3G too long time worst in 4G I have install battery guru , close all apps after finish I can't use one day corectly I need to conect my phone 2G if I want to go home .Technically my battery is god because i have check in the system . How i can optimize my battery an advice ?
I Hope I haven't ask too much question to you and write too long , I hope you will help me to solve my problems !!
Thanks
vithursan said:
Hello , I'm using C503 , ROM Custom Exitenz 1.0.5 Black Edition based on stock kernel , blocked bootloader. I have some problems on my Xperia SP I try to solve myself but no succes . I hope you will help me
1) I'm using the recovery of Philiz , the CMW Touch and I have make backup , I can't copy the backup on my computer . I have find the folder /media but I can't access with my computer because is not in the internal memory but in internal Sd . So , I have change the conection usb MTP to MSC but the computer don't regonize the mobile ,.I have try many times that didn't work . So I mount usb in recovery but that don't work i click on mount usb but that don't work ...
2) I've a problem of RAM , i have only 100 mb of free ram if i open some applications my phone strike and bug . I have lot of unnecessary applications as Facebook , Air Android I don't want these applications work i background ,... For that I have find auto start and I have configurate but that don"t work they application "not allowed "work even if I select to not start in the boot . So , I need to use Clean Master clean the Ram , use fast reboot and that free more than 250 mb of ram it's lot but i can't clean ram every hours to use my phoen if someone have a idea for me . I haven't waste application I use very appication mostly GO SMS PRO , whatssap , menssenger Facebook
3) I've install the Xposed Full Screen Call Picture and that don't work the framework all ork properly but not this module don't work .
4) Also since I have install this ROM I don't know if it's a real problem but when my pohne boot I have 2 vibration my I haven't the 3 coulours as before I don't know I have make many time fresh installation for other reasons but I haven't the 3 led on when the phone boot , it's just strange ...
5) Why you must trim a photo if you want to use in backgroudn screen of you phone .It was the same in all Xperia . Someone have a idea to get arround this obligation ??
6) I have a PROblem of battery , indeed my phone unsing is music 2h , whatsapp 2h wifi and 3G , SMS 100/days , 1hour call anything more . I have see i can't leave my phone conect in 3G too long time worst in 4G I have install battery guru , close all apps after finish I can't use one day corectly I need to conect my phone 2G if I want to go home .Technically my battery is god because i have check in the system . How i can optimize my battery an advice ?
I Hope I haven't ask too much question to you and write too long , I hope you will help me to solve my problems !!
Thanks
Click to expand...
Click to collapse
I also had problems with ram(not with 100mb but a little better) and with the battery lifetime and they were all fixed by repairing my phone to stock 4.3 using SEUS and leaving it there!
1) try safe mode on your computer
2) don't use task killers, they instantly free ram. The processes will restart. And if you are killing them over and over again, your phone uses power to re open them, so that affects your battery. The battery should last for 20 hours with wifi and auto brightness and heavy use of apps like Facebook, Twitter, Facebook messenger and SMS , EXCEPT games.
Dj Akis said:
1) try safe mode on your computer
2) don't use task killers, they instantly free ram. The processes will restart. And if you are killing them over and over again, your phone uses power to re open them, so that affects your battery. The battery should last for 20 hours with wifi and auto brightness and heavy use of apps like Facebook, Twitter, Facebook messenger and SMS , EXCEPT games.
Click to expand...
Click to collapse
Oh i see thanks . But how I can use the safe mod ??
vithursan said:
Oh i see thanks . But how I can use the safe mod ??
Click to expand...
Click to collapse
Open android normally..Press the power button until the menu shows up.Hold power off and then click ok
vithursan said:
Oh i see thanks . But how I can use the safe mod ??
Click to expand...
Click to collapse
write on google how to start safe mode with windows 7 or vista or xp(depends on your system), i think that the answer it could be find in the first 3 results
I am using the official release of android 4.3 for Xsp, and i am very happy with it. its smooth. It uses much ram(about 600 mb), but who cares, the phone is working perfect, even with heavy use and games
Dj Akis said:
write on google how to start safe mode with windows 7 or vista or xp(depends on your system), i think that the answer it could be find in the first 3 results
I am using the official release of android 4.3 for Xsp, and i am very happy with it. its smooth. It uses much ram(about 600 mb), but who cares, the phone is working perfect, even with heavy use and games
Click to expand...
Click to collapse
Wrong answer then!To start safe mode just google it for your specific operating system..I thought how to open android system in safe mode
UltraWelfare said:
Wrong answer then!To start safe mode just google it for your specific operating system..I thought how to open android system in safe mode
Click to expand...
Click to collapse
Yes, you got confused i said open safe mode on your computer, but i learn how to open safe mode on my sp, thank you! hahaha
Dj Akis said:
Yes, you got confused i said open safe mode on your computer, but i learn how to open safe mode on my sp, thank you! hahaha
Click to expand...
Click to collapse
Lol I know how to use safe mode of windows 7 . But why safe mode on windows ?
vithursan said:
Lol I know how to use safe mode of windows 7 . But why safe mode on windows ?
Click to expand...
Click to collapse
I will repeat your words "So , I have change the conection usb MTP to MSC but the computer don't regonize the mobile ,.I have try many times that didn't work . So I mount usb in recovery but that don't work i click on mount usb but that don't work ... " i think thats a drivers compability problem, open your computer on safe mode, and try again, i think that tha problem will be fixed
Dj Akis said:
I will repeat your words "So , I have change the conection usb MTP to MSC but the computer don't regonize the mobile ,.I have try many times that didn't work . So I mount usb in recovery but that don't work i click on mount usb but that don't work ... " i think thats a drivers compability problem, open your computer on safe mode, and try again, i think that tha problem will be fixed
Click to expand...
Click to collapse
ah okok thanks
I have test on two computer nothing work
Sent from my C5303 using xda app-developers app
Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you have the download link bellow the video ) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers right click on "sdbus.sys" -> properties -> security -> advanced -> owner TrustedInstaller click on change -> in the field labelled "enter the object name" type your username -> ok -> apply -> ok -> now back on security tab edit permissions -> click on users -> check all boxes from "permissions for users" tab on allow -> apply -> yes -> ok. Now delete "sdbus.sys"
14. Copy the "sdbus.sys" from the archive that i attached here to C:\Windows\System32\drivers
15. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Download HTC X9500 DRIVERS
ryu1 said:
Windows 10 Windows Technical Preview is available for more than a week. Since i have an extra old 40gb hdd for the shift, i decided to give it a try, and i can say that it works perfectly well. Everything works including touchscreen, wifi, bluetooth, modem, etc.
However installing the drivers may be a little tricky. Here are the steps:
1. Download Windows Technical Preview from microsoft website (download the x86 version)
2. Extract the .iso file to a usb stick (i used power iso to do that)
3. Plug the stick to the shift and boot from it
4. Follow on screen instruction to install windows
5. When done copy the drivers for the shift (you can find them on this forum) to a stick
6. First install "VistaECDrvV" in compatibility with windows vista (right click on the file - properties - compatibilty tab- run this program in compatibility mode for: - select windows vista (service pack 2) !! do that for all of the drivers) - restart later
7. Install "TouchScreen"
After installing touch screen driver the touch should work - give a restart
8. Install "Synaptics MicroPad" - restart later
9. Install "shagctrl" ignore the Microsoft .NET Framework missing error - restart later
10. Install "Marvell Wifi driver" - restart later
11. Press the Win+R key combination and type msconfig in the run box and hit enter - switch over to the boot tab, and click on the Safe Boot check box - select minimal -apply -ok - restart
13. With windows booted in safe mode navigate to C:\Windows\System32\drivers and delete "sdbus.sys" and "dumpsd.sys"
14. Press the Win+R key combination againg and type msconfig in the run box and hit enter - switch over to the boot tab, and unthick the Safe Boot check box - apply -ok - restart
15. When booted in normal mode copy the files from the "wififix" archive, that i attached to C:\Windows\System32\drivers and restart
16. You should have wifi working now - If you cannot find any wifi networks, as it was in my case, go to device manager - right click on the "Marvell sd8686 Wireless LAN SDIO Adapter" (the one without the exclamation mark if you have two) - properties - advanced - from the property box select 802.11D support - on the value box value box select enable. Your wifi should work ok now.
17. Install the "sherry driver 1.3" for the best performance of the video card. Search it on google.
18. That's it! enjoy
What i like most about windows 10 is that it have a "card view" of the running apps just like maemo 5 on noka n900, or the blackberry 10 os. Overall it runs a little better than windows 7 and similar with windows 8.1.
Maybe i will install it as a replacement for windows 8.1 update 1 on the main 120 gb hdd
Here is a small video to see how it runs:
Click to expand...
Click to collapse
Thanks alot, I am going to install it now
http://www.mediafire.com/download/c9g6a23223zr3sk/sherry1.3.2betaGMEGSE.rar
Excellent how-to. Clear and precise.
For those who want to perform it: taking a look at ryu1's comment in Post#14 is crucial!
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
B-44 said:
Excellent how-to. Clear and precise.
You bring shift to future.
Also an interesting Video- as i see you've only 1GB RAM installed, and nevertheless your Shift runs pretty fast-
faster than mine with 2GB and Win7U.
Network connection, connection to SnapVue... i'm really amazed.
How long does it take to boot, and what about GPS?
Think i'll create a new partition on my 128GB SSD and run Win10 from there.
How large do you think should it be?
Click to expand...
Click to collapse
Well, i'm sure gps work ok (at least on the windows mobile side) but didn't tested on the windows 10 side.
For booting, i'm sure it take less than 1 minute, but don't know the exact time.
If you want to make a partition for win10, that should be at least 10 gb.
It would be really nice to see how it will run on your shift with 2gb of ram.
Please post the result if you install it
Made 20GB... had been frequently suggested for win8
Now taking a look if I've got a spare usb stick.
Maybe I'm missing something here. On my X9500 I can't get by the error about the 800 MHz processor. Maybe you are on a different model?
Same thing occured with win8 if i recall right... early releases worked fine, and later ones also came up with this problem. (It may have been with BenQ MID S6 instead Shift, I'll try to find out.)
Don't know if there had been some workaround.
As MS is continuously working on it, it may depend on the releases' date.
Mine dates october 20th, but i won't be able to test until next weekend.
If ryu1 doesn't have another idea, it may be useful to share the release he uses.
The processor should always be the same.
edit: Post#86
http://forum.xda-developers.com/showthread.php?t=1264742&page=9
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Win 10 Technical Preview lists as a requirement:
Processor: 1 gigahertz (GHz) or faster
Error complained about lower specification.
It was the 32-bit version.
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
ryu1 said:
What error are you talking about? i installed windows 8, then 8.1 and now 10 but never got any error about cpu.
Are you sure you didn't download the 64 bit version?
Click to expand...
Click to collapse
Maybe i've got it...
in your how-to you say "Plug the stick to the Shift and boot from it".
You mean plug it in, start your shift, enter boot options and select usb stick to boot from, right?
I had prepared my usb stick with powerISO, plugged it in, opened my stick in devicemanager and doubleclicked "Install".
And ran into "your device won't be able to run Win10 because of less than 1GHz".
Maybe this was my mistake, and i won't have this problem when booting from stick.
Will report asap.
That's it..
Just do what daddy told us
(And DON'T use windows installer.)
I haven't finished installation completely,
but right now i must say speed is amazing!
As some drivers are automatically installed to volume "C" i think i'll switch the names of C and X
(the partition i'm installing to), reinstall all drivers and then switch back.
edit: obsolete, win has done it by itself
Sorry for the delay, but i am very bussy these days. Anyway the installation mus be done by booting from usb stick, not via installer.
I have allready installed windows 10 on the main hdd instead of windows 8.1. There are a few things i forgot to mention on the first post, when booting into safe mode to delete the "dumpsd" and "sdbus" files you'll need permission to delete them. Just follow this instructions to change the permission: http://www.askvg.com/guide-how-to-take-ownership-permission-of-a-file-or-folder-manually-in-windows/
That's what i just was about to ask you, as i am stuck at this point...
Will try later and report
Tomorrow.
edit: Think you should for your own sake update your initial post, concerning boot process and rightsmanagement.
Further visitors won't follow the whole thread and'll bomb you with questions.
B-44 said:
"error" may be the wrong word.
The problem had been discussed in the thread i have linked above.
Again: it may be interesting to know the date of release.
Click to expand...
Click to collapse
Oh, by error I meant I received an error message when trying to do the install the way I had tried it. I will read the new information posted here, thanks all.
Finished installation yesterday, everything was fine, quick'n'clean when suddenly wifi stopped working.
Marvell shows error code 10 and winupdate seems to have installed a different adapter.
SD adapter same error.
Had a similar experience when i installed win7, but there i already had a restore point to return to,
and since then everything was fine.
Will make a clean reinstallation, and after adding the wififix disable wifi to avoid possible system updates
and create a basic restore point i can return to each time winupdate kills something.
Preview build 9879
Anyone managed to get the latest build to work. Mine gives a message that my display resolution is too low and stops the upgrade.
Shame really as this works very well on the Shift, and with rumours that win 10 could be free it would have been a good o/s for this computer.
Please post code 0f builtversion.
Build 9860
Q&A for [ROM] HUAWEI Ascend W1-U00 | v1.00
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
DerSchorsch1 said:
It seems that in this video it's described, how the sdcard-problem can be permanently solved, so that we don't have to put the card out and in after a shutdown. Is this right?
Can this be implemented in the rom?
I don't understand the steps to do in the video. I can only recognize that i has something to do with visual studio. Can someone describe it more detailed?
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Everyone please donate, so he can buy a new gorilla glas display!
Click to expand...
Click to collapse
You did notice that this is an emulated device I hope? Rules for an emulator and for a live device are usually different.. just because a fix works in the emulator it doesn't have to work with the device.. and as far as I'm aware it doesn't.
Carrier Lock
Hi there,
Thanks for the ROM dev work!
I have a W1 which was O2 branded, after the procedure of installing the ROM, my phone has become carrier locked..
Is there an option I missed during install?
Regards,
Ed
I need help
Hello, I also use the HUAWEI Ascend W1 I come from China, I would like to know about the method of making the rom, and I open the app file will get a mbn file and do not know how to proceed, and I'm very interested in this, you can explain under it? (My English is not very good, but please forgive me use google) If you teach me, would be extremely grateful!
Hello,
thanks WojtasXda for the effort!
---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------
It will be possible to install the rom from Osx or linux?
Registry tweaks from russian forum (4pda)
Here, guys, tweaks for our HUAWEI W1.
Go to \Windows\Packages\RegistryFiles and place OEMSettings.reg here.
First bootup will be ~2 minites.
Tweak list:
-Camera sound on/off in sound settings;
-Wi-Fi connection sound on/off;
-3g/Wi-Fi arrows in status bar switched on;
-Activated PfD (don't install program);
-Jailbreak(interop unlock,capabilities unlock)
-Can be installed hacked appx's from wp-seven
-SDK registered
-Search button opens google
-Any app can be placed to camera's button (e.g. OneShot)
-Now you have Nokia Lumia 920 (doesn't really work).
To make your phone 'NL920', you must mount in regedit 'SYSTEM' and install 2nd (zip). After that, you can easily install all Nokia Exclusives via SysApp Pusher (also, more apps in store!).
I think you've got a typo in the OEMSettings.reg file (inside the same-named archive), on one of the tweaks that's supposed to give file system via USB:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvn]
should be
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvc]
unless it's supposed to control the Media Transfer Protocol Subversion
Will this work with Huawei Ascend W1-U00 from Globe PH plan?
Hi.
My phone was given to me by my mother who received it with her Globe (a Philippine mobile network service provider) postpaid plan (which unusually uses prepaid services). I've been frustrated with this phone's storage becoming full very easily even though I only have very few apps (except for Spider-Man Unlimited which downloaded a 200-MB DLC) installed and I don't put any files in the phone storage. Since Huawei seemingly abandoned their Windows phones, there's no hope of us getting any update so we're stuck with the stock WP8 update 1. Will this custom ROM work with this particular W1-U00? Does anyone know where I can get a stock ROM for this particular phone?
Name: Windows Phone
Model: HUAWEI W1-U00
Software: Windows Phone 8.0
Screen Resolution: 480x800
OS version: 8.0.10211.204
Firmware revision number: 1030.5614.29400.20500
Hardware revision number: HD1U8835M Ver.B
Chip SOC version: 8230
WojtasXda said:
Hello everyone !
I have new W1, but this is U34 version. Anyone tried flashign this model? Acctually QPST shows error "Cookie (if present) not received.
Click to expand...
Click to collapse
I have the U34 and I've not been able to flash it. I always get the same cookie error in QPST, and handshake failure error in WP8 Flash Tool.
I hope you will be able to find the way to flash the U34.
You need install Windows 7, Use Qemu or Vmware. Drivers from package with QPST doesnt works in W8.
Click to expand...
Click to collapse
That's not true at all. QPST works perfectly fine on Windows 8. The only issue is if you're running a x64 OS, in which case you need to run the QPST programs as admin.
Is this ROM only in English language?
Problems with Flashing
Hello!
At First thanks for the good work. I will donate it, if i getting it work for me.
I got some Problems with flashing.
1) With Flash Tool:
Diag Setting is on, Phone is resetted and with the Flashtool i get the "Firmware Handshake Fail"-Error.
2) With QPST i can get into Download Mode (Qualcomm ... 9008) but then it shows me a "Cookie not received"-Error.
I tried the Flashtool in Downloadmode but that doesnt recognize my device.
My PC-Config:
Windows 7 Ultimate 64-Bit
Intel i5 Notebook
My Handy-FW:
Huawei W1-U00 Simlock Free
OS Version: 8.10.14203.306 Developer Preview
Thank you very much!
Edit:
I got the Problem. It only works for me without Diag Settings and only with QPST.
The folder from the Repair Bootloader was: W1-U00 Repair bootloader/flashing/
and i only copied the "flashing" folder. Now no "Cookie"-Error.
Hope this helps someone....
Step 2 error
I finish step 1. Flash custom ROM with QPST (Windows 8.1 x64).
Phone in mass-storage mode (all disk available).
Qualcomm MMC Storage USB Device present in Device manager.
When run WP8CRUU get error: Cannot open device "Qualcomm MMC Storage USB Device" Error 5 .
Whats wrong?
Problem solved:
With phone connected as mass storage reinstall Qualcomm USB drivers!
Lag issue on the scroll
Hi @WojtasXda, I installed this wonderful ROM yesterday and everything is working perfectly THANK YOU SO MUCH <3
but when I scroll something with the finger always placed in the screen it lags a bit.
Huawei Ascend W1-U00
If you could help me to find a fix I thank
Error 109 on WP8CRUU.exe
Does v1.10 require v1.00 flashed first? I'm getting an error 109 (Cannot open device Qualcomm MMC Storage USB Device) when I run WP8CRUU.exe. My phone's (W1-U00) already in mass storage mode.
Now, I'm getting an error 5 (Cannot open device Qualcomm MMC Storage USB Device).
Can anyone please help me with this? I was able to flash the ROM with mass storage mode capability and set my phone to mass storage mode. Now, I can't flash the custom ROM because of this error. I don't think I missed anything. I'm running this on a Windows 7 Ultimate 64-bit. I didn't install MS Visual Studio 2013 since it requires Windows 8.1. I did install the Qualcomm USB drivers, simpleio, and QPST. I have MS Visual C++ 2005, 2008, and 2012 (all 32-bit) installed.
Arhy's workaround didn't work for me, by the way.
personal settings/data
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
blonder_andi said:
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
Click to expand...
Click to collapse
Try going to Settings -> backup.
tempname said:
Try going to Settings -> backup.
Click to expand...
Click to collapse
Thanks for the reply...
As far as is can see you just can backup fotos, messages, and IE-settings.
(no contacts, calender-information, certificates,...)
Is there another way to get at least my contacts from WP8 to WP8.1?
An additional question:
Is it possible to get back to WP8 after flashing the WP8.1 rom?
Any hints welcome
best regards
andi
install HUAWEI Ascend W1-U00 | v1.10
Hi, i try to install these rom.
To install that i do this steps:
1) Enter Qualcomm emergency mode
2) Click Start>All Application>QPST>QPST Configuration and configure phone
3) Start>All Application>QPST>eMMC Software Download，Click “Load Build Contents…” Select contents.xml in unrared W1-U00(C00)Repair bootloader.rar，Check "Program Boot Loaders",UnCheck "Program MMC device", Click Download
4) After complete, the port will change into Qualcomm HS-USB Diagnostics 9006
5) UnCheck Program boot loaders，Check Program MMC device，Select Qualcomm MMC port，Click Download again.
6) Wait for it to complete, disconnect phone.
7) Press and hold "vol -" then also press and hold Power button and connect the phone to the computer, now the device manager will display WP8 UEFI USB SimpleI/O Port.
8) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
9) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it
10) Run device in mass storage mode
11) Run WP8CRUU.exe... BUT
No instrunction, only black console. when i close the console the copy begin.. but stop at 45% with "Error: cannot write 5 file. Error 5"
Suggestion?
SOLVED: must be waiting on the black console
I can not find Data\\PROGRAMS\\WINDOWSAPP directory，how can I get full FS access ？
Hi , how are you guys , I hope everything is fine!
Is it possible for a tablet connect to Sync 3 as client device?
I just bought a china non branded tablet "Voyo i8 max" and I'm try to connect it to my Sync3.... and fail with nothing happened when I connect it.
For this Sync 3 HU , I'm pretty sure it is work well with Android auto , because I had ever connect it successfully to my HTC U Ultra.
The information of this tablet:
1. Android 7.1.1 ( I think it is AOSP)
2. CPU : Mediatek Helio X20
3. 4G ram
4. 64G flash
5. 4G LTE supported and able to dial phone to talk
That is what I tried for this tablet:
1. install Google play , service ....etc.(almost all I know apps from google frame)
2. install AA V3.4.582534 , V2.9xxx , V2.6(?)xxx
3. several USB cable were tried.
4. set tablet usb mode to data-transfer , charge , MTP ......etc.
5. root it and change build.prop from table to phone.
6. set tablet enable developer option and set usb as debug mode.
One thing very special is I follow this:
developer.android.com/training/auto/testing/
To use my PC as simulation HU , it successfully connected!!
so... I'm wondering if it is something need to "init" tablet AA when I plug this tablet to Sync 3?
this tablet is already rooted , so I can change root setting or change Linux kernel files....
it is very appropriate ,if you guys got any idea for this , please hint me .... I'll try it....
thank you very much and sorry about my English....
Hi everybody,
I just updated my Mi 9T PRO to 11.0.3.0 as suggested by the notification. The problem is that scrolling down the top bar I can't see the edit button to edit the toggles no more. I don't even have the second page of toggle. For example I'd like to add the button to switch gps and wifi tethering on and off.
Another maybe related problem is that I can't see any option to enable the app drawer that should have finally be released.
I yet tried to factory reset and then reinstall the miui 11.0.3.0 from setting menu, but nothing changed.
Have you got any solution pls?
Thanks
gorale said:
Hi everybody,
I just updated my Mi 9T PRO to 11.0.3.0 as suggested by the notification. The problem is that scrolling down the top bar I can't see the edit button to edit the toggles no more. I don't even have the second page of toggle. For example I'd like to add the button to switch gps and wifi tethering on and off.
Another maybe related problem is that I can't see any option to enable the app drawer that should have finally be released.
I yet tried to factory reset and then reinstall the miui 11.0.3.0 from setting menu, but nothing changed.
Have you got any solution pls?
Thanks
Click to expand...
Click to collapse
Same problema with Redmi Note 5 with latest weekly miui.eu cleaned installed
Hi, Solution? I Have mi 9 and same problem...
Hello dear,
If you have been facing this problem since the MIUI update, you can try a factory reset once. If the problem is not resolved after a factory reset, follow this process.
This method uses ADB and you require a PC or a laptop for this process.
(1) Download Android SDK Platform Tools to your PC/laptop and extract the zip file to C drive. If you are using Windows 7, you may need to download and install Xiaomi USB drivers if not already installed.
(2) Go to Settings- Additional Settings- Developer Options- enable USB Debugging & USB Debugging (Security Settings).
(3) Connect your mobile to PC / Laptop using original USB cable.
(4) Run CMD as administrator and type "cd C:\platform-tools" and press enter.
(5) Type "adb devices" and press enter - It will display a list of your devices connected to the PC / Laptop.
(6) Type "adb shell settings put secure sysui_qs_tiles default" and press enter - This will reset your notification shade. Now you will find the edit toggle.
Hopefully your issue will be solve by this process. Thanks