Lost dual sim functionality - BLU R1 HD Questions & Answers

Anyone else have any issues with one sim not working? I was on vampirefo's Zenui rom for a few days and both sims worked fine at the same time and then whichever one I don't have set as the data sim fails to work. It shows no signal for the sim thats not set as the data sim. Both had full signal yesterday. I flashed the LineageOS rom to see if it was rom related but still does the same thing. Am I missing something here?

AT&T shut down 2G

It's not just data that's affected. I get 4g anyhow. It shuts off the voice and SMS also on whichever sim isn't set as the default data sim

I retract my previous statement. Thanks lycsky for the insight. I've got Pure Talk USA on one sim and FreedomPop on the other. Whenever I set the preferred network type to 3g/4g on both whichever one isn't the data sim resets preferred type to 2g and it's greyed out. Is there any way to force it to not do that? In the preferred networks there's a list of about 20, can I delete the 2g ones and force 3g/4g?

Weasel0 said:
I retract my previous statement. Thanks lycsky for the insight. I've got Pure Talk USA on one sim and FreedomPop on the other. Whenever I set the preferred network type to 3g/4g on both whichever one isn't the data sim resets preferred type to 2g and it's greyed out. Is there any way to force it to not do that? In the preferred networks there's a list of about 20, can I delete the 2g ones and force 3g/4g?
Click to expand...
Click to collapse
AFAIK, this is the case for this phone. The hardware cannot handle both SIM on 3G/4G, so the usage is much more limited now with AT&T shut down 2G

I think your probably right. So I guess I'm sol on any kind of dual sim setup then as both puretalk and FreedomPop use at&t. I think they both use the mobile too but their coverage sucks here. Unless someone has a solution.

I have similar issue.
I insert H20 PAYG SIM card into Slot 1 for voice and txt only. And Freedompop SIM card for data into Slot 2 for data only.
For couple months, there was no problem to use. Last month, I noticed that SIM slot 1 keep shown as "no signal." I swap the SIM card each slots; H20 into slot 2 and Freedompop into slot 1, but same issue. H20 Sim card seems dead. I made call, the phone didn't ring. Also the phone didn't make call.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I turn off SIM slot 2(Freedompop) and set all voice, txt, and data to H20. And Now, H20 brings 4G LTE+Voice+TXT everything.
But actually that's not what I want.
I upgraded to v6.6 and then to v7.2 again, still same problem.

seungbaekm said:
I have similar issue.
I insert H20 PAYG SIM card into Slot 1 for voice and txt only. And Freedompop SIM card for data into Slot 2 for data only.
For couple months, there was no problem to use. Last month, I noticed that SIM slot 1 keep shown as "no signal." I swap the SIM card each slots; H20 into slot 2 and Freedompop into slot 1, but same issue. H20 Sim card seems dead. I made call, the phone didn't ring. Also the phone didn't make call.
I turn off SIM slot 2(Freedompop) and set all voice, txt, and data to H20. And Now, H20 brings 4G LTE+Voice+TXT everything.
But actually that's not what I want.
I upgraded to v6.6 and then to v7.2 again, still same problem.
Click to expand...
Click to collapse
From what I understand the phone can't do 3 or 4g on both SIM cards at once. It can only do 2g on one and 3 or 4g on the other but at&t has done away with 2g and at&t is what H2O and FreedomPop both use. I think what I'm going to do is is just go with FreedomPop by itself.

Weasel0 said:
From what I understand the phone can't do 3 or 4g on both SIM cards at once. It can only do 2g on one and 3 or 4g on the other but at&t has done away with 2g and at&t is what H2O and FreedomPop both use. I think what I'm going to do is is just go with FreedomPop by itself.
Click to expand...
Click to collapse
Your are right.
I insert Lycamobile PAYG SIM card. Tested call and data, and both works OK.
I thought I used H20+Freedompop before, but guess it was Lycamobile+Freedompop.
My main phone number is on Google Voice, so too many SIM cards I swaped and used.
Unlike H20+Freedompop, Lycamobile+Freedompop shows R(roaming?) instead 4G, but speed seems almost same.

seungbaekm said:
Your are right.
I insert Lycamobile PAYG SIM card. Tested call and data, and both works OK.
I thought I used H20+Freedompop before, but guess it was Lycamobile+Freedompop.
My main phone number is on Google Voice, so too many SIM cards I swaped and used.
Unlike H20+Freedompop, Lycamobile+Freedompop shows R(roaming?) instead 4G, but speed seems almost same.
Click to expand...
Click to collapse
So are you able to use Lycamobile+FreedomPop at the same time then?

Same problem happened to me just after the first of the year.. I have always used my TracFone in SIM slot 1 (I think that is on AT&T network?!).
Then Freedompop on SIM slot 2.
Data is set for Freedompop. But when I do that SIM1 drops out and I can't send/receive calls/SMS on TracFone in SIM Slot 1.
From the discussion this sounds like it happened when AT&T dropped 2G and the BLU R1 HD doesn't support both cards in this situation?
Wow, okay, well that is too bad, but can someone confirm that it is the issue and there isn't going to be a solution for it? THANKS SO MUCH!!

bradhmn said:
Same problem happened to me just after the first of the year.. I have always used my TracFone in SIM slot 1 (I think that is on AT&T network?!).
Then Freedompop on SIM slot 2.
Data is set for Freedompop. But when I do that SIM1 drops out and I can't send/receive calls/SMS on TracFone in SIM Slot 1.
From the discussion this sounds like it happened when AT&T dropped 2G and the BLU R1 HD doesn't support both cards in this situation?
Wow, okay, well that is too bad, but can someone confirm that it is the issue and there isn't going to be a solution for it? THANKS SO MUCH!!
Click to expand...
Click to collapse
The way I understand it is the R1 can't do both Sims if their both 3g and up, only 2g on one and 3g and up on the other. The only option I can figure is a T-Mobile carrier for calls/texts on 2g and an at&t carrier for data on the other. Where I live T-Mobile service is pretty much nil though. Be nice if it was just a matter of software but I'd imagine it's hardware related.

At the chance of sounding stupid, could someone explain to me why a data connection is needed anyway for just calls/SMS? It's not always been that way has it?

bradhmn said:
Same problem happened to me just after the first of the year.. I have always used my TracFone in SIM slot 1 (I think that is on AT&T network?!).
Then Freedompop on SIM slot 2.
Data is set for Freedompop. But when I do that SIM1 drops out and I can't send/receive calls/SMS on TracFone in SIM Slot 1.
From the discussion this sounds like it happened when AT&T dropped 2G and the BLU R1 HD doesn't support both cards in this situation?
Wow, okay, well that is too bad, but can someone confirm that it is the issue and there isn't going to be a solution for it? THANKS SO MUCH!!
Click to expand...
Click to collapse
If you use AT&T this phone pretty much became single SIM. T-Mobile still have 2G, so you can have dual SIM function if you use T-Mobile signal for call/sms.
---------- Post added at 03:58 AM ---------- Previous post was at 03:53 AM ----------
Weasel0 said:
At the chance of sounding stupid, could someone explain to me why a data connection is needed anyway for just calls/SMS? It's not always been that way has it?
Click to expand...
Click to collapse
AT&T now use 3G for voice. They also have VoLTE. The voice still works if you turn off "cellular data". It's like a mandate network upgrade.

Yes, it's definitely the AT&T 2G migration. I was also on Freedompop (SIM1) and H2O (SIM2). Thus, I just switched to T-Mobile, which promises to keep supporting 2G until 2020. I'm not happy about it: T-mobile's pay-as-you-go is not as good a deal as H2O, and the call quality is not quite as good as being on the AT&T Network. And Freedompop's call quality over VOIP is just not good enough for me to use it as a primary voice line. But I've gotten addicted to Freedompop's free data (which I use to check Google Voice texts through Hangouts, so never pay for texts), so if I want to make calls through SIM2, T-mobile seems like the only option.

I switched to TPO wireless which uses T-Mobile I think. Still can't get both Sims to play nice with each other

Related

[Q] dual SIM question

Quick question for you dual SIM users.
Does the Moto G2 support 3G on both Sims?
I intend using two three SIM cards, but they only support 3G. So if SIM two is only working on 2G it would be no good to me.
Thanks
The data connection is for one sim only, you get to choose if you use data on sim one or two, data is automatically change sim, for example from 3g sim1/2g sim2 to 2g sim1/3g sim2
Thanks, I'm with you. So with my two three Sims there would be only one SIM on at any one time.
I have I signal SIM moto g1 now, and if I switch to 2g only the three SIM no longer works.
eemgee said:
Thanks, I'm with you. So with my two three Sims there would be only one SIM on at any one time.
I have I signal SIM moto g1 now, and if I switch to 2g only the three SIM no longer works.
Click to expand...
Click to collapse
Both Sim work at the same time while I'm using 3g in any Sim.
Data is available only for one Sim at a time, but the change is really fast and automatic when you select which Sim to use for data
I use mine with same carrier, it uses the 850mhz band.
Remember this phone is dualsim standby, it means if you're using voice in one Sim the other is unreachable.
fburgos said:
Both Sim work at the same time while I'm using 3g in any Sim.
Data is available only for one Sim at a time, but the change is really fast and automatic when you select which Sim to use for data
I use mine with same carrier, it uses the 850mhz band.
Remember this phone is dualsim standby, it means if you're using voice in one Sim the other is unreachable.
Click to expand...
Click to collapse
Yes just on most networks if you are on 2G the sim still works. On three they don't.
A three SIM won't work on 2G no calls text or anything.
So even with both sims in standby only one would receive calls, am I right?
Only way to receive calls on either SIM (from standby) on a moto g is if at least one SIM works on 2G?
eemgee said:
Yes just on most networks if you are on 2G the sim still works. On three they don't.
A three SIM won't work on 2G no calls text or anything.
So even with both sims in standby only one would receive calls, am I right?
Only way to receive calls on either SIM (from standby) on a moto g is if at least one SIM works on 2G?
Click to expand...
Click to collapse
I've own two dual sim phones s4mini (lost it) an this moto g 2014, both are stated as dual sim standby, I haven't notice any difference in the way they handle simcards/data/voice.
On both phones I've use same carrier/numbers, one is personal (same number for 10+ years) the other from work (same number for 5+ years).
I've never missed a call on either Sim.
Even if I'm downloading something I can receive calls and text messages on that sim the download stops but my phone core functionality is still a phone for both simcards with any combination of data in 2g/3g or 2g/2g.
I'm never going to carry two separated phones, for me is enough the dualisim standby functionality.
For you is a pain that your carrier don't support 2g network any dual sim standby won't work, you need a dual sim phone with two separate modems
fburgos said:
For you is a pain that your carrier don't support 2g network any dual sim standby won't work, you need a dual sim phone with two separate modems
Click to expand...
Click to collapse
Thanks for confirming that, only other thing I can do is use one SIM and activate call divert on the other number.
That's the main drawback with three only supporting 3G/4G

Dual sim, dual 3G standby concurrently?

The Chinese variant supports Full Netcom 3.0 which during standby mode allows the 1st sim to be in 4G/3G and the 2nd sim to be in 3G-voice at the same time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This means in countries like Japan and South Korea which do not have 2G network, both sims will be able to receive incoming calls via 3G during standby mode as neither sims are forced to 2G. As far as I know, this is different from all previous dual sim phones which only allow one sim to be in 4G/3G while forcing the other sim to be in 2G, thus rendering the second sim useless when there is no 2G network available.
From the youtube video reviews of the Indian variant, I have only seen one sim in 4G/3G while the other sim will be in 2G.
Does anyone know if the Indian variant supports dual standby with 4G/3G on the 1st sim and 3G-voice on the 2nd sim, at the same time, like the Chinese variant? Or will the 2nd sim be forced to 2G once the 1st sim is in 4G/3G, and vice versa?
Finally something that I've been looking for since I moved to Japan 2 years ago.
Now if only it doesn't look hideous...
as a force to establish that 1 to 3g sim was, and 2 sim only 2g?
mtkc said:
... As far as I know, this is different from all previous dual sim phones which only allow one sim to be in 4G/3G while forcing the other sim to be in 2G, thus rendering the second sim useless when there is no 2G network available. ...
Click to expand...
Click to collapse
I cannot help you with the question(s) on the Indian Mi 5 variant, but I may confirm that all current generation of phones are 4G+2G only.
http://forum.xda-developers.com/android/help/dual-sim-simultaneous-4g-3g-capable-t3370632
I don't think that MI5 works both SIMs 3G or LTE. Whenever I switch SIM1 as 3G or LTE Preferred instantly SIM2 will go to 2G only.
This is confirmed!
kamrul.auntu said:
I don't think that MI5 works both SIMs 3G or LTE. Whenever I switch SIM1 as 3G or LTE Preferred instantly SIM2 will go to 2G only.
This is confirmed!
Click to expand...
Click to collapse
As far as I am aware, that is true for the Indian variant. The Chinese variant, however, is confirmed to be able to connect to both LTE + 3G simultaneously; I have 2 Chinese Mi 5 Pros and they both work as stated.
I have tested on mi Mi5 and i confirm that. First SIM is 2G/3G/4G with data and second SIM 2G/3G simultaneously.
I am in France and it is tested on Orange / Bouygues. It is the fist phone i have tested with this function...
mtkc said:
The Chinese variant supports Full Netcom 3.0 which during standby mode allows the 1st sim to be in 4G/3G and the 2nd sim to be in 3G-voice at the same time.
This means in countries like Japan and South Korea which do not have 2G network, both sims will be able to receive incoming calls via 3G during standby mode as neither sims are forced to 2G. As far as I know, this is different from all previous dual sim phones which only allow one sim to be in 4G/3G while forcing the other sim to be in 2G, thus rendering the second sim useless when there is no 2G network available.
From the youtube video reviews of the Indian variant, I have only seen one sim in 4G/3G while the other sim will be in 2G.
Does anyone know if the Indian variant supports dual standby with 4G/3G on the 1st sim and 3G-voice on the 2nd sim, at the same time, like the Chinese variant? Or will the 2nd sim be forced to 2G once the 1st sim is in 4G/3G, and vice versa?
Click to expand...
Click to collapse
THERE IS NO SUCH THING AS MI5 china variant and MI5 India variant. You would like to think you are special, but you aren't. MI5 is produced in 3 variants (normal, prime, pro) and it's sold in china or in global markets .. like India.
so.. you might have to redo the question, so it can be properly answered. Nobody knows what is India variant of MI5... it might be a clone made in India as far as I know.
gxg said:
THERE IS NO SUCH THING AS MI5 china variant and MI5 India variant. You would like to think you are special, but you aren't. MI5 is produced in 3 variants (normal, prime, pro) and it's sold in china or in global markets .. like India.
so.. you might have to redo the question, so it can be properly answered. Nobody knows what is India variant of MI5... it might be a clone made in India as far as I know.
Click to expand...
Click to collapse
Calm down - don't recall saying I was special?
I read that in either the official Xiaomi forums or xda when I was wondering the same thing and some users said they couldn't get dual 3g purchased from the official Indian Mi5 store.
Was only trying to help but ofc you keyboard warriors just can't help yourselves
my mi 5 (indian version) during standby mode allows the 1st sim to be in 4G/3G and the 2nd sim to be in 3G..
however, this ability is kind of an issue for me, because i want my 2nd sim to be in 2G (to save battery & better reception of cellular network)
is there any way to force the 2nd sim to 2G?
meetpal said:
my mi 5 (indian version) during standby mode allows the 1st sim to be in 4G/3G and the 2nd sim to be in 3G..
however, this ability is kind of an issue for me, because i want my 2nd sim to be in 2G (to save battery & better reception of cellular network)
is there any way to force the 2nd sim to 2G?
Click to expand...
Click to collapse
In dialer *#*#4636*#*# or tap % times on memory capasity in settings. In additional settings you can chose Simcard 2 and inside chose Only GSM
After restart it has to be set up again.
So.. did anyone get to conclusion here?

Metro SIM in BLU R1 HD not being seen

I have a friend who is on MetroPCS here in the States and he can't seem to get his SIM card to be seen by this device. It was originally meant as a going-to-college gift but has turned into more of a headache than a gift. Yes, we know that MetroPCS uses T-Mobile's towers and the Blu R1 HD is entirely compatible with it...we just don't know why his SIM won't work. Originally we had to get a SIM adapter for the Nano SIM to make it fit the MicroSIM slots, but regardless of which slot we put it in, the phone is stuck on "Emergency Calls Only".
If anyone could help, that'd be a lifesaver, as he starts school on the 22nd of August.
Things we've tried:
Going through the searching for operators function in settings->more->cellular networks
Entering different values in APNs (settings->more->cell networks->APNs)
Restarting a bagillion times
Changing preferred networks
Repeatedly tapping on which sim slot to use for data and messaging
Going into Data Usage only to not find the Cellular data option next to MetroPCS
Did you try another SIM? It's possible that the phone itself is shot. Otherwise, the SIM could be shot. Did you try the SIM in another device? It seems unlikely (however, not impossible) that the SIM and the phone just don't like each other. It's also possible that your adapter is positioning the SIM incorrectly. You should be able to get a good one by going to a T-Mobile store. They usually have a few laying around.
Doesn't Metro require you to give them the phone's IMEI before being able to use the new phone? Contact Metro CS and tell them you got a new phone that you want to use and give them the IMEI
If you alrdy did that then try using another active SIM (borrow from friend/family) and see if that works fine with the phone in case the phone is defective
I have Metro PCS and this phone. You need to call MetroPCS and give them the IMEI. Make sure you give them the right IMEI as there are 2 SIM slots on the phone - each with its own IMEI
We went to a T-mobile store to get a good adapter for free.
Thanks, we'll try this!
It worked. His phone is now setup thanks.

LTE not working on LineageOS 14.1

Recently i installed Custom ROM LineasgeOS 14.1 . But currently i am facing two problem.
1. I am getting only GSM 2G network, no 3G or 4G.
2. No radio
System Details: LineageOS version : 14.1-20180418-NIGHTLY-cherry
Android Version : 7.1.2
Device Model: Che1-L04
Internet Provider: O2 postpaid (Country Germany)
Here is what i tried:
1.
Went to Phone Dialer;
Dial *#*#4636#*#* to choose phone information;
Set the Preferred Network Type to LTE/GSM auto (PRL);
Turn off the radio and turn it on again;
Go to the SMSC and click Refresh>> Update.
2. Changed phone internet setting, tried with different network types
3. Tried to change Access Point settings according to my provider
Nothing worked :crying::crying:
Did anyone faced the same problem or know how to solve this problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But it did not work.
nomades said:
Recently i installed Custom ROM LineasgeOS 14.1 . But currently i am facing two problem.
1. I am getting only GSM 2G network, no 3G or 4G.
2. No radio
System Details: LineageOS version : 14.1-20180418-NIGHTLY-cherry
Android Version : 7.1.2
Device Model: Che1-L04
Internet Provider: O2 postpaid (Country Germany)
Here is what i tried:
1.
Went to Phone Dialer;
Dial *#*#4636#*#* to choose phone information;
Set the Preferred Network Type to LTE/GSM auto (PRL);
Turn off the radio and turn it on again;
Go to the SMSC and click Refresh>> Update.
2. Changed phone internet setting, tried with different network types
3. Tried to change Access Point settings according to my provider
Nothing worked :crying::crying:
Did anyone faced the same problem or know how to solve this problem.
But it did not work.
Click to expand...
Click to collapse
I think you should try other options listed in the Set Preferred Network Type, based on the type of Network listed the Wikipedia article. You can try to research about what type of network your carrier uses, then mix and match it until you get the appropriate setting.
Anyway, thank you for the *#*#4636#*#* that let me fixed my network.
Have a nice day fixing!
rn4Nlos said:
I think you should try other options listed in the Set Preferred Network Type, based on the type of Network listed the Wikipedia article. You can try to research about what type of network your carrier uses, then mix and match it until you get the appropriate setting.
Anyway, thank you for the *#*#4636#*#* that let me fixed my network.
Have a nice day fixing!
Click to expand...
Click to collapse
I am happy that it helped you and thanks for suggestion
So finally i found the solution.
I found out that i had problem with dual sim. When i was using dual sim i was getting EDGE (2G) on my primary sim but when i removed my secondary sim then 3G/LTE start working . Even swapping primary and secondary sim in sim slot one and slot 2 was not helping. It is quite strange but it solved my problem.
nomades said:
So finally i found the solution.
I found out that i had problem with dual sim. When i was using dual sim i was getting EDGE (2G) on my primary sim but when i removed my secondary sim then 3G/LTE start working . Even swapping primary and secondary sim in sim slot one and slot 2 was not helping. It is quite strange but it solved my problem.
Click to expand...
Click to collapse
Glad to hear that.
Thanks.
nomades said:
So finally i found the solution.
I found out that i had problem with dual sim. When i was using dual sim i was getting EDGE (2G) on my primary sim but when i removed my secondary sim then 3G/LTE start working . Even swapping primary and secondary sim in sim slot one and slot 2 was not helping. It is quite strange but it solved my problem.
Click to expand...
Click to collapse
Thanks for solution working for me too on mokee rom, love you man :good::good::good::good:
nomades said:
So finally i found the solution.
I found out that i had problem with dual sim. When i was using dual sim i was getting EDGE (2G) on my primary sim but when i removed my secondary sim then 3G/LTE start working . Even swapping primary and secondary sim in sim slot one and slot 2 was not helping. It is quite strange but it solved my problem.
Click to expand...
Click to collapse
Thank you so much! The mobile data was lacking in my Moto G6 Plus (running the official release lineage-17.1-20200407-nightly-evert-signed.zip). Once I tried to remove the SIM 2 from my phone, the mobile data worked so well. Then I pulled the two SIMs into my phone, and happily both worked at all. :good:
nomades said:
So finally i found the solution.
I found out that i had problem with dual sim. When i was using dual sim i was getting EDGE (2G) on my primary sim but when i removed my secondary sim then 3G/LTE start working . Even swapping primary and secondary sim in sim slot one and slot 2 was not helping. It is quite strange but it solved my problem.
Click to expand...
Click to collapse
You're the best brother. Thanks for the solution.
I have bn using android 11 on SM-A705FN. Then I can switch to any of two Sims for internet. Just from drop down, there are options sim1, sim2 and data Sims to choose any sim for it, depending the sim that was subscribed for internet.
But now on lineage os 20....no such privilege. The phone automatically chooses Sims....
Please help rescript this error so that person can choose any sim for internet....thank u...

Wifi calling and Volte

Hi. So I was having trouble with calls, signal drops, very annoying whooshing noises and so on. When I contacted the carrier they said let's turn VOLTE THEN WIFI CALLING. my wife and I have the p20 pro CLT-LO4 and neither of our phones have an option for volte or wifi calling. Contacted carrier(Koodo) I'm in canada. They said well it's suppose to be there reset you phone and check again. No dice then press *#*#4935#*#* and it does nothing. They say it's enabled on there end and don't have a solution... I called Huawei and they took my serial number and model and told me that it's the carrier 100%....
try this.
Open phone settings > Wireless & networks > Mobile network > both VoLTE calls and Wi-Fi calling settings should be there.
if you can't find, it is because the carrier disabled it in the rom. Try to unlock bootloader, root and flash an international rom to get it back.
When I talked to the carrier they assured that it was unlocked.
If you have a link on how to preform the tasks you said ide definately give it a try
Thank you
One question tho is it possible to brick the phone? Reason I'm asking is my wife's phone is 8 months old but I just switched from my s9 to this one 2 days ago so i can tech bring it back and get a refund but the problem is there isn't any other phones offered besides the p30 pro that compare and I would have to pay $690 down plus 20 a month for 24 months where as p20pro was $0 down and 15 a month.
If the carrier supports it, then you should have the option in settings. In my case, when I bought the phone only one of the two carriers that I have in each sim card was supporting WiFi calling. Now that both support it, I have it in the settings. The problem that I have found with WiFi calling though is that if you start a phone call through WiFi and you move to a place with bad reception, then the call is dropping. Also, if you are on a WiFi call and you go to a place where the wifi has no reception whatsoever, then again the call drops, instead of switching to normal call. In other words, whatever the way you make the call, you have to finish it. There is no switching during the call; this became really frustrating, so I now switched it to mobile network preferred
Sent from my CLT-L29 using Tapatalk
Alot of misinformation about this on the net.
Regardless of what your carrier says this is in fact a carrier issue.
If you simply swap sim cards to another carrier that DOES support these features on all phones with no restrictions then it will show up in the settings.
sinnedone said:
Alot of misinformation about this on the net.
Regardless of what your carrier says this is in fact a carrier issue.
If you simply swap sim cards to another carrier that DOES support these features on all phones with no restrictions then it will show up in the settings.
Click to expand...
Click to collapse
Exactly, line one doesn't have that option but SIM 2 does .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVR-L29 using Tapatalk
Limeybastard said:
Exactly, line one doesn't have that option but SIM 2 does .View attachment 4878505
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
This screenshot is from a Mate 20 X but the same thing shows up when I insert this sim into a P20 Pro.
(Oh....in the United States when you pop in a T-Mobile SIM you will have Volte toggle in settings but not on ATT)
sinnedone said:
This screenshot is from a Mate 20 X but the same thing shows up when I insert this sim into a P20 Pro.
(Oh....in the United States when you pop in a T-Mobile SIM you will have Volte toggle in settings but not on ATT)
Click to expand...
Click to collapse
T-Mobile SIM 1 , no volte toggle here thanks for the clarification. My post was primarily to reinstate your point about WiFi being carrier/SIM dependent.
Sent from my EVR-L29 using Tapatalk
quinnford said:
When I talked to the carrier they assured that it was unlocked.
If you have a link on how to preform the tasks you said ide definately give it a try
Thank you
Click to expand...
Click to collapse
I'll upload a video tutorial when i get back home tonight.
spiderx_mm said:
try this.
Open phone settings > Wireless & networks > Mobile network > both VoLTE calls and Wi-Fi calling settings should be there.
if you can't find, it is because the carrier disabled it in the rom. Try to unlock bootloader, root and flash an international rom to get it back.
Click to expand...
Click to collapse
hi i tried searching in google for the volte enable in my mobile device Huawei P20 Pro , my other sim says it is volte ready however the other sim volte radio button cant be seen i tried switching sims but everytime i switch sim the volte button will transfer leaving me a sim card tray with no volte does this mean that it is the carrier needs to enable volte? others say that i need to wait for update on my mobile device
My device has a model CLT-L29 Global version for Huawei P20 Pro EMUI version is 10.0.0 Android 10 and it says for this version there is no update for EMUI 11 so does this mean i can not use volte anymore or do i need to contact carrier for the volte to be enabled?
thanito said:
If the carrier supports it, then you should have the option in settings. In my case, when I bought the phone only one of the two carriers that I have in each sim card was supporting WiFi calling. Now that both support it, I have it in the settings. The problem that I have found with WiFi calling though is that if you start a phone call through WiFi and you move to a place with bad reception, then the call is dropping. Also, if you are on a WiFi call and you go to a place where the wifi has no reception whatsoever, then again the call drops, instead of switching to normal call. In other words, whatever the way you make the call, you have to finish it. There is no switching during the call; this became really frustrating, so I now switched it to mobile network preferred
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
I am also using CLT-L29 GLOBAL however only one sim has the wifi calling radio button enabled and hd calling but on sim 2 there is no volte calls radio button both sims are set to 4G i have tried switching sims but everytime i switch sims the sim that has volte calls radio button and wifi calling will move if i switch the sim cards the other sim tray no volte radio button will appear

Categories

Resources