I'm trying to flash via adb sideload, installed 15sec adb and 1st boot, trying to flash full zip via sideload, device shows but stuck at loading screen and then after some time loading fails..installing from recovery fails too.. Help mee plzz.
Related
Ok I have an issue, I tried to install a ROM using TWRP and after it finished installing I rebooted and got stuck in a boot loop on the bootloader screen (the screen you get to when you hold down the power button and down on the volume). I read online somewhere that I have to relock and unlock my phone which I proceeded to do, but as you may know that deletes everything off of your SD card. Then I went into cmd and used the code
fastboot wipe cache
fastboot flash recovery recovery.img
I can now get into TWRP but I have no rom to restore to, no back up and when I go to Advanced Adb Sideload, then swipe to download it says
"Adb Sideload Complete" (at the top)
"Failed" (in red right below it)
I know I have to do something with adb or fastboot, but when I type Abd Devices into cmd I get the picture below which says:
List of devices attached
FA34PS901853 recovery
I cant adb push or install and I have NO clue what to do
But im pretty sure that I somehow have to reinstall Superuser so some help with that would be much appreciated as well
PLEASE O PLEASE can someone help me with this
For some reason my phone will not boot into recovery. I have tried booting into recovery from the system and via adb. Takes me straight to bootloader. Strange thing is when in bootloader/fastboot mode my computer will not recognize my device in adb when connected, but when I am booted into the system the phone is recognized in adb. I think I have to reflash my recovery (twrp v2.6.3) but originally I flashed it with goo manager, which seems to be down atm. My question is how do I get my device recognized while in bootloader/fastboot again so I can manually flash twrp, and what were the commands to properly flash the recovery via bootloader/fastboot. I did do a search but did not find specific results that answer my questions. I know I've read about this happening but I cannot remember where. Tia.
Edit: FIXED!!!Needed fastboot in same directory where adb exe was located. Commands were able to be run to flash recovery from fastboot.
Before installing a rom zip from twrp recovery, as soon as i got the successful message i proceeded to format my internal storage. Now the rom is stuck with bootloop , i have a twrp recovery installed which is fairly (not too much) old though, also adb sideload does not work (the recovery always tells that adb sideload is starting). Also that i do not have usb-debugging on. Also, though the recovery has the option to mount otg, it doesnt seem to work. Also i am not able to access the fastboot and flashmode by just pressing the volume up/down while inserting the usb cable. To enter into the recovery i need to switch on the device and hold power for 12 secs and then press the volume down. This leads me to the bootloader using which i can reach the recovery. Any help or advise is appreciated. Thank You
You didn't say if you tried to RUU. At this point, I'd download the RUU from here and run it. It's the first link in the OP. If you are s-on, make sure to lock your bootloader first.
Thanks for the reply coal686.
How can i lock my bootloader ?
Coz i do not have access via fastboot or adb.
Neither i can connect an otg.
even adb sideload doesnt seem to work.
Added later :
Also that though my bootloader shows fastboot, my device isnt detected and it always stays in <waiting for device> stage.
Finally, adb sideload started working... Htc one restored
Thanks for the RUU suggestion though...
May be usefull next time :laugh:
Tried rooting my phone today through this method
IBtimes method if you google search it you'll see it immediately
Booted in TWRP installed both Zeus Kernel and Super SU as linked but then when I reboot my phone its stuck in boot loop tried going to recovery mode and was stuck with no command error. Any ways I can recover my phone? I also can't go through adb reboot recovery command for some reasons.. I don't know what to do anymore.
If u can use fastboot to reboot on bootloader mode reflash twrp and then restore a backup if u have
Hello, first off all I will thank all the help you can provide,
My problem, My urbane was running AW 2.0 but it made it laggy I unlock the bootloader and flash it with the 4 cores boot.img from this thread (I did not root or install twrp) then I realize OTA wont get into my urbane so I flash the stock boot.img from the same thread above, then uptade via OTA, all fife until here.
Then I try to reload the 4cores boot.img and my problems started. after this the watch wont start anymore and stay boot animation. but was responsive to adb reboot bootloader commands so I then flash stock boot.img but also didnt boot (even waiting over 20 mins) then as I had img files (BOOT, RECOVERY and SYSTEM to restore it to original AW v1.5 i tried flashing that boot.img from this thread the MM-boot.img flashed didnt help either. then I pressed the button for 20 secs and watch reload and even when it sounds how to is detected as USB on my computer and it is shown as "Android Bootloader Interface" on the device manager it never ever is shown under adb devices command. whatever I do it does not shown under devices attached so I can flash back factory boot, recovery and system images.
So if I start the watch stays forever on the boot animation, and if I swipe my finger at start to boot into bootloader is detected by windows as "Android Bootloader Interface" but "adb devices" command wont show the watch.
Help Please!!!!
Ale.
If manually start my device in bootloader it is detected by windows device manager, but when I type "adb devices" have nothing but if I set manually to bootloader then to recovery mode and then I select apply update from ADB, then watch is again detected by device manager, in this case and ONLY this case adb devices shows my watch but only as sideload ("my serial number" sideload) what can I do there? I cant use fastboot commands.
The things is that I think I wipe data and factory reset the watch and now I dont have adb debugging enable and cant so fastboot commands what can I do, please? is tehre a way to enable adb debugging without being able to boot the watch? can I sideload (as is the only way adb see my watch) the full "NXH19X_full_factory.zip" I tried "adb sideload NXH19X_full_factory.zip" but strat to write into the watch but gives error 21 and close after few seconds.
Please Help.
Ale.
**UPDATE**
Even when adb devices wont show my watch I was still able to flash factory images and is all working now.
This issue is over, close thread please and thanks.
I'm expecting the same simptoms and issues over here. All happens after to flash the 4 core img. Sudelly stucks. Please let me know if you have any news about