Before installing a rom zip from twrp recovery, as soon as i got the successful message i proceeded to format my internal storage. Now the rom is stuck with bootloop , i have a twrp recovery installed which is fairly (not too much) old though, also adb sideload does not work (the recovery always tells that adb sideload is starting). Also that i do not have usb-debugging on. Also, though the recovery has the option to mount otg, it doesnt seem to work. Also i am not able to access the fastboot and flashmode by just pressing the volume up/down while inserting the usb cable. To enter into the recovery i need to switch on the device and hold power for 12 secs and then press the volume down. This leads me to the bootloader using which i can reach the recovery. Any help or advise is appreciated. Thank You
You didn't say if you tried to RUU. At this point, I'd download the RUU from here and run it. It's the first link in the OP. If you are s-on, make sure to lock your bootloader first.
Thanks for the reply coal686.
How can i lock my bootloader ?
Coz i do not have access via fastboot or adb.
Neither i can connect an otg.
even adb sideload doesnt seem to work.
Added later :
Also that though my bootloader shows fastboot, my device isnt detected and it always stays in <waiting for device> stage.
Finally, adb sideload started working... Htc one restored
Thanks for the RUU suggestion though...
May be usefull next time :laugh:
Related
Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
mderksen said:
Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
Click to expand...
Click to collapse
Can you get into recovery though? Just sideload rom through USB OTG
1) no panic
2) can you access recovery? if no flash recovery again in fastboot -> turn phone off -> boot into recovery
3) in recovery you should be able to use adb comands (push rom to sd-card)
4) flash rom
hansbert said:
1) no panic
2) can you access recovery? if no flash recovery again in fastboot -> turn phone off -> boot into recovery
3) in recovery you should be able to use adb comands (push rom to sd-card)
4) flash rom
Click to expand...
Click to collapse
I have to flash recovery again. Will CWM do? Where do i have to go in CWM to use adb?
Do i have to use this command? Adb push file.zip /sdcard
I can't shutdown the phone now so i have to wait till battery is empty. I can press power as long as i want but it hangs at boot now.
mderksen said:
I have to flash recovery again. Will CWM do? Where do i have to go in CWM to use adb?
Do i have to use this command? Adb push file.zip /sdcard
I can't shutdown the phone now so i have to wait till battery is empty. I can press power as long as i want but it hangs at boot now.
Click to expand...
Click to collapse
When you say it hangs at boot, do you mean it reboots then hangs at boot, or it just won't shut down? I would try plugging in to usb and then unplugging a couple of times (connecting to your pc), then try rebooting by holding power button. As soon as it shuts down, hold volume down and power back on to get to recovery.
Do you have a usb otg cable?
Basil3 said:
When you say it hangs at boot, do you mean it reboots then hangs at boot, or it just won't shut down? I would try plugging in to usb and then unplugging a couple of times (connecting to your pc), then try rebooting by holding power button. As soon as it shuts down, hold volume down and power back on to get to recovery.
Do you have a usb otg cable?
Click to expand...
Click to collapse
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
mderksen said:
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
Click to expand...
Click to collapse
Did you try holding the power & volume down buttons while holding the phone under a bright light? Sometimes works...
mderksen said:
Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
Click to expand...
Click to collapse
Did you only relock or also flashed stock recovery? Also are you S-Off already? The more info you provide, the easier we can help. In any case breath calm, you will be back soon.
Sent from my HTC One - powered by TrickDroid
mderksen said:
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
Click to expand...
Click to collapse
OK, well if you don't have USB OTG, do what Hansbert says.
You could use the all in one toolkit found here: http://forum.xda-developers.com/showthread.php?t=2183942
Reinstall HTC drivers, flash clockwork mod recovery (if you're sure it's not there) and then you could use the "ADB sideload a ROM" found in extras.
Edit: he_stheone will sort you out....he fixes everything :highfive:
he_stheone64 said:
Did you only relock or also flashed stock recovery? Also are you S-Off already? The more info you provide, the easier we can help. In any case breath calm, you will be back soon.
Sent from my HTC One - powered by TrickDroid
Click to expand...
Click to collapse
I did relock because i wanted to try stock recovery RUU. RUU failed and recovery didn't work anymore.
Now i unlocked bootloader again, and flashed ClockworkMod recovery again.
Try holding phone under bright light while holding power helped me! Thank you redbull123.
I'm now in CWM. Hope adb will work too.
*edit*
adb sideload found. adb devices command also works now. i'm going to try the adb sideload rom.zip command now
adb sideload rom.zip command works! I tried a custom rom 2 times but CWM freezes a couple of times so i had to start over. The third time it says rom is succesfully flashed
I can confirm now after reboot it works. Thank you all so much for your quick replies.
Nice to hear that
Sent from my HTC One - powered by TrickDroid
Ok I have an issue, I tried to install a ROM using TWRP and after it finished installing I rebooted and got stuck in a boot loop on the bootloader screen (the screen you get to when you hold down the power button and down on the volume). I read online somewhere that I have to relock and unlock my phone which I proceeded to do, but as you may know that deletes everything off of your SD card. Then I went into cmd and used the code
fastboot wipe cache
fastboot flash recovery recovery.img
I can now get into TWRP but I have no rom to restore to, no back up and when I go to Advanced Adb Sideload, then swipe to download it says
"Adb Sideload Complete" (at the top)
"Failed" (in red right below it)
I know I have to do something with adb or fastboot, but when I type Abd Devices into cmd I get the picture below which says:
List of devices attached
FA34PS901853 recovery
I cant adb push or install and I have NO clue what to do
But im pretty sure that I somehow have to reinstall Superuser so some help with that would be much appreciated as well
PLEASE O PLEASE can someone help me with this
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
The phone can't boot in bootloader?
Guich said:
The phone can't boot in bootloader?
Click to expand...
Click to collapse
When i chose from CWM recovery menu "Reboot recovery", phone boot into download mode, and thats all. Fastboot or adb dont see it.
But. In usb device list:
In download mode:
Bus 002 Device 061: ID 0bb4:0ff9 HTC (High Tech Computer Corp.) Desire / Desire HD / Hero / Thunderbolt (Charge Mode)
In recovery mode:
Bus 002 Device 063: ID 0bb4:0f91 HTC (High Tech Computer Corp.)
Assuming you didn't corrupt your boot loader you should be able to get at the boot loader and use fastboot to flash a new recovery.
Power the device off
Hold power and volume down, the phone should turn on and load into the boot loader.
From there you can select fastboot (navigate menu with volumn buttons, power button to select fastboot).
You can use this command to flash a recovery:
Code:
fastboot flash recovery recovery.img
If you can enter bootloader,you may try formatting partitions from fastboot,and flashing them afterwards,that is if bootloader is unlocked.
You can also lock your bootloader and try installing RUU,it will put your phone back to stock,
P.S. - I'm new to this,so please consult with more experienced members,before doing anything
ZloY909 said:
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
Click to expand...
Click to collapse
you "fastboot flash boot recovery.img"? you may want to check this thread: http://forum.xda-developers.com/showthread.php?t=2478438&page=3
if that doesn't help, post back
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
ZloY909 said:
Has the same problem, flashed CWM Recovery to the boot partiotion. Can you give me more info about that magic what you are done to cennect your phone to fastboot? =)
Thanks.
Best Regards.
Click to expand...
Click to collapse
fastboot shouldn't be affected.
when you connect your phone to the PC, does it the text in bootloader change from "FASTBOOT" to "FASTBOOT USB"
Guich said:
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
Click to expand...
Click to collapse
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
"screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds" -> that's stock recovery
Before, when you are in bootloader (image attached), are you able to "fastboot devices" and it shows up? because the bootloader is not affected by the recovery.
basically "fastboot flash boot recovery.img" put the custom recovery where the kernel is supposed to be.
First thing you need to get/confirm working is bootloader/fastboot.
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
herrfricke said:
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
Click to expand...
Click to collapse
I will check this out. Thanks for your reply.
Now i reinstall to win8, reinstall drivers and adb.
Guich said:
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Click to expand...
Click to collapse
Thanks for your reply. This help me to get to the bootloader.
Now i try to flash boot.img into boot =)
Ok. I have working phone =)
Thanks for yours replies.
I started to root my phone this morning. I did the HTVDev unlock, flashed twrp, then tried to flash viperboy's disable RW system protect. This caused my phone to just hang at the HTC screen. I let my phone die and was able to get into my bootloader and fastboot. I tried to push the rom via adb but I kept getting the error of no device connected. Then i tried to flash the stock boot.img though fastboot. This brought me back to the HTC screen but now when I plug it in to my computer it shows up for everything and it installs drivers but the HTC MTP Device fails. Now I cant send commands to reboot through fastboot or adb. Im currently waiting for it to die again to get back to twrp or the bootloader. Any advice on how to proceed?
Thanks,
Paris6906
Paris6906 said:
I started to root my phone this morning. I did the HTVDev unlock, flashed twrp, then tried to flash viperboy's disable RW system protect. This caused my phone to just hang at the HTC screen. I let my phone die and was able to get into my bootloader and fastboot. I tried to push the rom via adb but I kept getting the error of no device connected. Then i tried to flash the stock boot.img though fastboot. This brought me back to the HTC screen but now when I plug it in to my computer it shows up for everything and it installs drivers but the HTC MTP Device fails. Now I cant send commands to reboot through fastboot or adb. Im currently waiting for it to die again to get back to twrp or the bootloader. Any advice on how to proceed?
Thanks,
Paris6906
Click to expand...
Click to collapse
Likely no need to let it die -- a hard reset (hold the power and vol down for a very long time) should bring you back to the bootloader (hopefully). It'll seem like a good long while -- keep pressing.
From there, select 'fastboot' and press the power button, then plug in to your computer (USB). That'll show USB on the fastboot line.
Then, on your computer, open a command window (presuming you're using Windows) in the SDK platform-tools directory and type:
fastboot devices
If that gives back your device ID, you're at least at a reasonable fastboot. I'd flash a good recovery (I use PhilZ, and while it might be foreign to you (CWM style), it lets you load a ROM via OTG cable over USB if you have such a cable -- if not, hopefully sideload works for you in TWRP if you stick with that) -- just to be sure you have a good recovery.
Then, reboot into recovery.
Your kernel (boot.img) apparently is garbage, so hopefully you can either put a ROM on USB and flash from that (OTG) or adb sideload it. All the ROMs normally have a good kernel so would flash your boot.img properly during install. Were me me, I'd flash O.M.J's stock rooted ROM just so you at least get back to some place of sanity).
If that all fails, you might have to RUU and start over.
Let us know and we'll help out.
If that gives back your device ID, you're at least at a reasonable fastboot. I'd flash a good recovery (I use PhilZ, and while it might be foreign to you (CWM style), it lets you load a ROM via OTG cable over USB if you have such a cable -- if not, hopefully sideload works for you in TWRP if you stick with that) -- just to be sure you have a good recovery.
ok. can you use adb push in fastboot? also i noticed that my captive buttons blink when i tried to turn off my phone. don't know if that means anything.
OMG it worked! Thank you so much. I uber appreciate it. Today I learned a ton about how android works and how to use adb and fastboot. While the processed about gave me a heart attack i did learn a lot. I can not believe how great of a resource xda is. The knowledge of everyone on here is incredible. I cant thank you enough.
Thanks all,
Paris6906
Twrp asks me to install superuser. when i type in command "adb usb" it says daemon running then error device not found. in bootloader mode it says **tampered** *** Unlocked*** s-on, I cant push any files on because phone is not recognized. adb sideload mode wont work on twrp. i dont know what to do please help. when i flash a new recovery it still loads up twrp 2.6.3.3 i have checked all forums and tried everything and nothing seems to work.
I can now push files onto my device what do i do now.
i get this issue alot my self never found a way around it i just use a otg cable with a flash drive to flash stuff.
Sieze said:
i get this issue alot my self never found a way around it i just use a otg cable with a flash drive to flash stuff.
Click to expand...
Click to collapse
the problem is that twrp doesnt recognise my usb when i plug it in. and i cant flash a newer version.