Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
mderksen said:
Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
Click to expand...
Click to collapse
Can you get into recovery though? Just sideload rom through USB OTG
1) no panic
2) can you access recovery? if no flash recovery again in fastboot -> turn phone off -> boot into recovery
3) in recovery you should be able to use adb comands (push rom to sd-card)
4) flash rom
hansbert said:
1) no panic
2) can you access recovery? if no flash recovery again in fastboot -> turn phone off -> boot into recovery
3) in recovery you should be able to use adb comands (push rom to sd-card)
4) flash rom
Click to expand...
Click to collapse
I have to flash recovery again. Will CWM do? Where do i have to go in CWM to use adb?
Do i have to use this command? Adb push file.zip /sdcard
I can't shutdown the phone now so i have to wait till battery is empty. I can press power as long as i want but it hangs at boot now.
mderksen said:
I have to flash recovery again. Will CWM do? Where do i have to go in CWM to use adb?
Do i have to use this command? Adb push file.zip /sdcard
I can't shutdown the phone now so i have to wait till battery is empty. I can press power as long as i want but it hangs at boot now.
Click to expand...
Click to collapse
When you say it hangs at boot, do you mean it reboots then hangs at boot, or it just won't shut down? I would try plugging in to usb and then unplugging a couple of times (connecting to your pc), then try rebooting by holding power button. As soon as it shuts down, hold volume down and power back on to get to recovery.
Do you have a usb otg cable?
Basil3 said:
When you say it hangs at boot, do you mean it reboots then hangs at boot, or it just won't shut down? I would try plugging in to usb and then unplugging a couple of times (connecting to your pc), then try rebooting by holding power button. As soon as it shuts down, hold volume down and power back on to get to recovery.
Do you have a usb otg cable?
Click to expand...
Click to collapse
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
mderksen said:
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
Click to expand...
Click to collapse
Did you try holding the power & volume down buttons while holding the phone under a bright light? Sometimes works...
mderksen said:
Hi,
I did a stupid thing today I wiped a lot of things in recovery. Now Android is gone and my sd card is empty.
I'm using ClockworkMod Touch Recovery v6.0.3.1 for recovery.
Phone was unlocked.
CID: O2___102
fastboot is working but adb isn't. Probably because i have no android and can't check usb debugging mode.
Now i think the only way is to use an RUU. I relocked the phone and tried the following RUU's:
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe
It gives me a customer error. Probably because it's an O2 phone. I didn't find an O2 RUU. What can i do?
Click to expand...
Click to collapse
Did you only relock or also flashed stock recovery? Also are you S-Off already? The more info you provide, the easier we can help. In any case breath calm, you will be back soon.
Sent from my HTC One - powered by TrickDroid
mderksen said:
It hangs at white screen: htc quietly brillant screen. No reboots. Normally it shutdown if you hold power for 10 seconds but not right now.
Don't know about the cable. I have got the original micro-USB to USB cable. I use this cable also for fastboot
Click to expand...
Click to collapse
OK, well if you don't have USB OTG, do what Hansbert says.
You could use the all in one toolkit found here: http://forum.xda-developers.com/showthread.php?t=2183942
Reinstall HTC drivers, flash clockwork mod recovery (if you're sure it's not there) and then you could use the "ADB sideload a ROM" found in extras.
Edit: he_stheone will sort you out....he fixes everything :highfive:
he_stheone64 said:
Did you only relock or also flashed stock recovery? Also are you S-Off already? The more info you provide, the easier we can help. In any case breath calm, you will be back soon.
Sent from my HTC One - powered by TrickDroid
Click to expand...
Click to collapse
I did relock because i wanted to try stock recovery RUU. RUU failed and recovery didn't work anymore.
Now i unlocked bootloader again, and flashed ClockworkMod recovery again.
Try holding phone under bright light while holding power helped me! Thank you redbull123.
I'm now in CWM. Hope adb will work too.
*edit*
adb sideload found. adb devices command also works now. i'm going to try the adb sideload rom.zip command now
adb sideload rom.zip command works! I tried a custom rom 2 times but CWM freezes a couple of times so i had to start over. The third time it says rom is succesfully flashed
I can confirm now after reboot it works. Thank you all so much for your quick replies.
Nice to hear that
Sent from my HTC One - powered by TrickDroid
Related
Hi All..! I bricked my phone Its HTC One Unlocked edition 32GB. It had Android 4.2.1 native OS & not activated(at&t SIM just worked). I wanted to restore it back with stock ROM with WWE RUU. Not sure what went wrong, its not booting up, or going into recovery/bootloader... nothing!?!
PWR button + Vol down gave me factory menu. Vol up + USB gave me the bootloader menu with recovery, fastboot, UART, normal boot. But nothing works now, I can just see this bootloader menu but not booting up. Any tips to try?
For use a ruu you need a relocked bootloader, and for choose the ruu, you have to check your cid and main-version.
However, you can push a rom into your sd and flash it with the recovery.
For put it into your sd. boot into it and type:
Code:
adb push name_of_rom.zip /sdcard/
after this, flash the rom.
p.s. The rom will be into your adb/fastboot folder.
None of it can work as my phone is not booting up. I can only see the bootloader menu and once I select any of these 4(fastboot/recovery/UART/normal boot), it automatically shuts off and I just see the black screen with charging animation.
Guich said:
For use a ruu you need a relocked bootloader, and for choose the ruu, you have to check your cid and main-version.
However, you can push a rom into your sd and flash it with the recovery.
For put it into your sd. boot into it and type:
Code:
adb push name_of_rom.zip /sdcard/
after this, flash the rom.
p.s. The rom will be into your adb/fastboot folder.
Click to expand...
Click to collapse
jasonvss said:
None of it can work as my phone is not booting up. I can only see the bootloader menu and once I select any of these 4(fastboot/recovery/UART/normal boot), it automatically shuts off and I just see the black screen with charging animation.
Click to expand...
Click to collapse
So, if you will select fastboot it will reboot and charge?
Guich said:
So, if you will select fastboot it will reboot and charge?
Click to expand...
Click to collapse
Yes, correct. I shall wait for the battery to discharge completely and then charge for an hour & try again if fastboot works.(looks like this procedure worked for someone on other thread)
jasonvss said:
Yes, correct. I shall wait for the battery to discharge completely and then charge for an hour & try again if fastboot works.(looks like this procedure worked for someone on other thread)
Click to expand...
Click to collapse
Umh, understood.
So, you have to try this and report if you have other issue
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
The phone can't boot in bootloader?
Guich said:
The phone can't boot in bootloader?
Click to expand...
Click to collapse
When i chose from CWM recovery menu "Reboot recovery", phone boot into download mode, and thats all. Fastboot or adb dont see it.
But. In usb device list:
In download mode:
Bus 002 Device 061: ID 0bb4:0ff9 HTC (High Tech Computer Corp.) Desire / Desire HD / Hero / Thunderbolt (Charge Mode)
In recovery mode:
Bus 002 Device 063: ID 0bb4:0f91 HTC (High Tech Computer Corp.)
Assuming you didn't corrupt your boot loader you should be able to get at the boot loader and use fastboot to flash a new recovery.
Power the device off
Hold power and volume down, the phone should turn on and load into the boot loader.
From there you can select fastboot (navigate menu with volumn buttons, power button to select fastboot).
You can use this command to flash a recovery:
Code:
fastboot flash recovery recovery.img
If you can enter bootloader,you may try formatting partitions from fastboot,and flashing them afterwards,that is if bootloader is unlocked.
You can also lock your bootloader and try installing RUU,it will put your phone back to stock,
P.S. - I'm new to this,so please consult with more experienced members,before doing anything
ZloY909 said:
Hello dear guru's =)
I have an HTC One international. Today i try to get root access and install custom recovery, whent i flash recovery i missed that chose a boot partition to install it. Now phone boots only into recovery, and from my PC, adb or fastboot don see it, but in usb devices its present.
Im on linux Ubuntu 13.04.
In phone dont have any backup.
Click to expand...
Click to collapse
you "fastboot flash boot recovery.img"? you may want to check this thread: http://forum.xda-developers.com/showthread.php?t=2478438&page=3
if that doesn't help, post back
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
ZloY909 said:
Has the same problem, flashed CWM Recovery to the boot partiotion. Can you give me more info about that magic what you are done to cennect your phone to fastboot? =)
Thanks.
Best Regards.
Click to expand...
Click to collapse
fastboot shouldn't be affected.
when you connect your phone to the PC, does it the text in bootloader change from "FASTBOOT" to "FASTBOOT USB"
Guich said:
Guys, we have to check if he can boot in bootloader/fastboot.
So, @ZloY909, if you're in recovery, adb can recognize your phone?
And, in CWM, there is the option: reboot bootloader?
As download mode you mean bootloader?
Click to expand...
Click to collapse
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
"screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds" -> that's stock recovery
Before, when you are in bootloader (image attached), are you able to "fastboot devices" and it shows up? because the bootloader is not affected by the recovery.
basically "fastboot flash boot recovery.img" put the custom recovery where the kernel is supposed to be.
First thing you need to get/confirm working is bootloader/fastboot.
ZloY909 said:
adb or fastboot is not recognize my phone. In cwm recovery i have only reboot option or reboot into recovery. I have the same situation as tha developer in other post.
when i chose boot to recovery i have : "screen with a phone icon and a green image like i can connect via usb or something, but then it turns red after about 30 seconds"
Click to expand...
Click to collapse
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
herrfricke said:
Hey, so I'm the one who had this same situation. What I had to do from what I recall is go to CWM screen, cleared the cache, even in advanced the davlik cache, then I believe (and you might have to try different combinations of this, because I don't 100% remember as I had before tried so many different ways) I unmounted the system mount, then went to reboot from the first screen to get to the bootloader (hold power button and volume down). After this, I clicked on Fastboot and it then went to Fastboot USB. This is where you should be able to connect. Don't leave this screen until you flash the recovery in the right place and then properly install the ROM. Let me know if you get to at least connecting and I can even send over an image for your boot, so you can at least get your phone back.
It can be done, I had the same situation so your phone is not bricked. Just keep working at it.
Click to expand...
Click to collapse
I will check this out. Thanks for your reply.
Now i reinstall to win8, reinstall drivers and adb.
Guich said:
In cwm adb will work.
So i think you have some issue with drivers.
And, however, if you turn off the phone, you can't access in bootloader with a longpress of power and vol-?
Click to expand...
Click to collapse
Thanks for your reply. This help me to get to the bootloader.
Now i try to flash boot.img into boot =)
Ok. I have working phone =)
Thanks for yours replies.
I was trying to flash one of the kitkat based new roms i found on this site through the app and it didn't seem to work as i recieved the message saying installation aborted, then my phone buzzed and flashed and restarted but it's stuck on the htc quietly brilliant screen and i cannot get to recovery at all. when i try i see the lights at the bottom menu buttons just flashing.
I did a backup before the install but can't get into recovery now. i've found a proper nandroid backup but my phone wont turn off,restart or go into recovery now, so pissed. please help asap
p.s. the rom i can't even remember the name of it but it said it was one for all versions of htc one.
mine is the canadian version on rogers if it matters.
.and it looks like my computer isn't recognizing it now either
playboypaul said:
I was trying to flash one of the kitkat based new roms i found on this site through the app and it didn't seem to work as i recieved the message saying installation aborted, then my phone buzzed and flashed and restarted but it's stuck on the htc quietly brilliant screen and i cannot get to recovery at all. when i try i see the lights at the bottom menu buttons just flashing.
I did a backup before the install but can't get into recovery now. i've found a proper nandroid backup but my phone wont turn off,restart or go into recovery now, so pissed. please help asap
p.s. the rom i can't even remember the name of it but it said it was one for all versions of htc one.
mine is the canadian version on rogers if it matters.
.and it looks like my computer isn't recognizing it now either
Click to expand...
Click to collapse
What I'm gonna say is ridiculous! BUT IF YOU DIDN'T **** UP YOUR BOOTLOADER you should be able to boot into the bootloader by performing these steps:
First: Press the power and volume up/down button for about two minutes... your phone should respond with vibrate/flashing...
Secondly: Hold your phone under a bright light and press the powerbutton for a minute or so... then try different combinations with the hardwarebutton until it boots into the bootloader.
From bootloader you can perform the following steps to get a OS working on your phone:
This is a quote by me, someone had almost the same problem like you:
Okay, first here you have the correct adb and fastboot files, I uploaded them quickliy for you, I think this way they should work properly:
http://uploaded.net/file/ykwya517
Next thing are these HTC Drivers, in this post are a few of them: http://forum.xda-developers.com/show....php?t=2089508 and on my computer there are the 4.3.0.001 drivers, so I'd recommand downloading those(Credits go to @mdmower):
http://www.mediafire.com/download/n5...+4.3.0.001.exe
Now shut down your phone and boot in into the bootloader with pressing the power button and the volume down button. Then select fastboot and enter this menu. Now if the drivers are installed correctly there should be written FASTBOOT USB. I think you said you are unlocked... so the following command should run just fine. Open a command prompt and navigate to the folder where adb and fastboot are placed. In this folder you copy your custom recovery(TWRP) and you flash it with this command:
Code:
Code:
fastboot flash recovery [recoveryname].img
And DON'T worry about adb in the bootloader! ADB doesn't work with the bootloader. Now you boot into your recovery by chosing Recovery somewhere in your bootloader. If you are in the bootloader you somehow need to push the ROM to your HTC One... This should work with this command...
Code:
adb push "C:\FolderWhereRomIsStored\rom.zip" "/data/media/0/rom.zip"
Click to expand...
Click to collapse
And if this doesn't copy it correctly simply place your zip on your computer to a folder that is empty and push this folder to your HTC One with:
Code:
adb push "C:\FolderWhereRomIsStored" "/data/media/0"
Click to expand...
Click to collapse
Now you are good to go, simply flash the zip form TWRP. I think you know how this works Simply go to install and then chose the zip and flash it.
If you now want to s off... then ask me again. I'll give you an advice
Click to expand...
Click to collapse
Thanks I got it working finally but it was sticking on the HTC screen for over an hr twice and the lamp worked within 10 seconds to get into recovery? I was so amazed that the lamp worked that I did it again and same results, stuck on HTC screen and the light worked again. That's to awesome. Thanks
Sent from my HTC One using xda app-developers app
playboypaul said:
Thanks I got it working finally but it was sticking on the HTC screen for over an hr twice and the lamp worked within 10 seconds to get into recovery? I was so amazed that the lamp worked that I did it again and same results, stuck on HTC screen and the light worked again. That's to awesome. Thanks
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
The funny thing is that I don't believe it neither.. but if someone has this kind of error it always works However, nice to know that your device is back alive... if you have any further questions reply/quote this comment so I get notified
LibertyMarine said:
The funny thing is that I don't believe it neither.. but if someone has this kind of error it always works However, nice to know that your device is back alive... if you have any further questions reply/quote this comment so I get notified
Click to expand...
Click to collapse
Hello again I'm glad I found you on find myself with almost the same exact issue as before, this time I've accidentally deleted my OS but I can boot to bootloader and my twrp although my device HTC m7 isn't recognised by my computer or when I try an adb push to the device. I have android sdk installed and the HTC sync manager and the drivers are installed but when I plug device says drivers are Not installed?
playboypaul said:
Hello again I'm glad I found you on find myself with almost the same exact issue as before, this time I've accidentally deleted my OS but I can boot to bootloader and my twrp although my device HTC m7 isn't recognised by my computer or when I try an adb push to the device. I have android sdk installed and the HTC sync manager and the drivers are installed but when I plug device says drivers are Not installed?
Click to expand...
Click to collapse
Hey there. It's quite some time ago since I last "played around" with my HTC One M7 but I think I am still able to help you solve your problem.
Firsr a few questions:
> What OS are you using for adb? Win7/8/10?
> Do you have an USB OTG cable? (would make fixing very easy. You just copy the OS zip onto an USB stick and then plug it into your Cellphone using an OTG cable. Then flashing can be done without any problems)
If you've already solved your problem, notify my anyways
LibertyMarine said:
Hey there. It's quite some time ago since I last "played around" with my HTC One M7 but I think I am still able to help you solve your problem.
Firsr a few questions:
> What OS are you using for adb? Win7/8/10?
> Do you have an USB OTG cable? (would make fixing very easy. You just copy the OS zip onto an USB stick and then plug it into your Cellphone using an OTG cable. Then flashing can be done without any problems)
If you've already solved your problem, notify my anyways
Click to expand...
Click to collapse
sorry i was at work but OS is windows 7 home premium
maybe i should look into the OTG cable.
i get a message saying "cannot read rom.zip" when trying to use command line to push as per the thousands of tutorials online lol.
when i plug in the phone to computer and turn phone on (which is on the HTC splash screen since no OS) then a popup on computer says installing device driver software.
Android Phone X Device Unplugged
USB Composite Device Ready to use
HTC MTP Device X Failed
USB storage devie Ready to use
My HTC Ready to use
HTC android USB Device Ready to use
my cable is really wobbly and none ive tried lately seem to want to fit in the slot snug so HTC MTP Device installed again and now says "Ready to Use also, then cycled the install again and settled on FAILED so only Android Phone has an X for device unplugged since no OS to turn on and HTC MTP has an X for Fail. this is where ill enter fastboot mode or recovery to try push/flash my copy of cm14 and gapps to the device.
i have cmd window open with rom and gapps and an updated version of twrp in adb and fastboot folder.
i entered fastboot mode and pushed recovery through then as per the tutorial i then entered recovery which flashed properly with the new version. then i went to adb sideload and all commands worked like adb kill-sever and adb usb also adb devices came with text saying list of attached devices which theyre is none.
then adb sideload rom.zip came back with:
error: device not found
I started to root my phone this morning. I did the HTVDev unlock, flashed twrp, then tried to flash viperboy's disable RW system protect. This caused my phone to just hang at the HTC screen. I let my phone die and was able to get into my bootloader and fastboot. I tried to push the rom via adb but I kept getting the error of no device connected. Then i tried to flash the stock boot.img though fastboot. This brought me back to the HTC screen but now when I plug it in to my computer it shows up for everything and it installs drivers but the HTC MTP Device fails. Now I cant send commands to reboot through fastboot or adb. Im currently waiting for it to die again to get back to twrp or the bootloader. Any advice on how to proceed?
Thanks,
Paris6906
Paris6906 said:
I started to root my phone this morning. I did the HTVDev unlock, flashed twrp, then tried to flash viperboy's disable RW system protect. This caused my phone to just hang at the HTC screen. I let my phone die and was able to get into my bootloader and fastboot. I tried to push the rom via adb but I kept getting the error of no device connected. Then i tried to flash the stock boot.img though fastboot. This brought me back to the HTC screen but now when I plug it in to my computer it shows up for everything and it installs drivers but the HTC MTP Device fails. Now I cant send commands to reboot through fastboot or adb. Im currently waiting for it to die again to get back to twrp or the bootloader. Any advice on how to proceed?
Thanks,
Paris6906
Click to expand...
Click to collapse
Likely no need to let it die -- a hard reset (hold the power and vol down for a very long time) should bring you back to the bootloader (hopefully). It'll seem like a good long while -- keep pressing.
From there, select 'fastboot' and press the power button, then plug in to your computer (USB). That'll show USB on the fastboot line.
Then, on your computer, open a command window (presuming you're using Windows) in the SDK platform-tools directory and type:
fastboot devices
If that gives back your device ID, you're at least at a reasonable fastboot. I'd flash a good recovery (I use PhilZ, and while it might be foreign to you (CWM style), it lets you load a ROM via OTG cable over USB if you have such a cable -- if not, hopefully sideload works for you in TWRP if you stick with that) -- just to be sure you have a good recovery.
Then, reboot into recovery.
Your kernel (boot.img) apparently is garbage, so hopefully you can either put a ROM on USB and flash from that (OTG) or adb sideload it. All the ROMs normally have a good kernel so would flash your boot.img properly during install. Were me me, I'd flash O.M.J's stock rooted ROM just so you at least get back to some place of sanity).
If that all fails, you might have to RUU and start over.
Let us know and we'll help out.
If that gives back your device ID, you're at least at a reasonable fastboot. I'd flash a good recovery (I use PhilZ, and while it might be foreign to you (CWM style), it lets you load a ROM via OTG cable over USB if you have such a cable -- if not, hopefully sideload works for you in TWRP if you stick with that) -- just to be sure you have a good recovery.
ok. can you use adb push in fastboot? also i noticed that my captive buttons blink when i tried to turn off my phone. don't know if that means anything.
OMG it worked! Thank you so much. I uber appreciate it. Today I learned a ton about how android works and how to use adb and fastboot. While the processed about gave me a heart attack i did learn a lot. I can not believe how great of a resource xda is. The knowledge of everyone on here is incredible. I cant thank you enough.
Thanks all,
Paris6906
Before installing a rom zip from twrp recovery, as soon as i got the successful message i proceeded to format my internal storage. Now the rom is stuck with bootloop , i have a twrp recovery installed which is fairly (not too much) old though, also adb sideload does not work (the recovery always tells that adb sideload is starting). Also that i do not have usb-debugging on. Also, though the recovery has the option to mount otg, it doesnt seem to work. Also i am not able to access the fastboot and flashmode by just pressing the volume up/down while inserting the usb cable. To enter into the recovery i need to switch on the device and hold power for 12 secs and then press the volume down. This leads me to the bootloader using which i can reach the recovery. Any help or advise is appreciated. Thank You
You didn't say if you tried to RUU. At this point, I'd download the RUU from here and run it. It's the first link in the OP. If you are s-on, make sure to lock your bootloader first.
Thanks for the reply coal686.
How can i lock my bootloader ?
Coz i do not have access via fastboot or adb.
Neither i can connect an otg.
even adb sideload doesnt seem to work.
Added later :
Also that though my bootloader shows fastboot, my device isnt detected and it always stays in <waiting for device> stage.
Finally, adb sideload started working... Htc one restored
Thanks for the RUU suggestion though...
May be usefull next time :laugh: