Hey, i need xposed on my phone and i've tried a few times different installations.
Phone : UMI Plus
Android : 6.0.1 Official build
Xposed (for now) : systemless
But i've tested official xposed but doesn't work.
It writed "Xposed v87.0 active" but when i install a module, and after rebooting the module doesn't work, and when i launch it, he say me "module is not activated" :"(
Please help me.
Here is link of Youtube video
Hey,
I assume you have Magisk installed and activated to use systemless Xposed ?
So you also try official arm64 Xposed for your device ?
Envoyé de mon MI 4LTE en utilisant Tapatalk
Already tested normal xposed, and of cours it was activated
Maybe your phone is not fully compatible.. It's weird cause we can see that Xposed Manager tells everything is fine, but actually not
Envoyé de mon MI 4LTE en utilisant Tapatalk
You know what the app check to say it's working fine?
I don't know, did you try Xposed 86.2 systemless ? Works great for me with SuperSu systemless without Magisk ?
Envoyé de mon Unsupported MI Cancro en utilisant Tapatalk
I will thanks
Can you share me the flashable zip? Please
Same problem here. But I can not go back to v86 because of november security patch. I tried the normal version (not the systemless) but I still get the same message from my modules.
You can find it here https://forum.xda-developers.com/xp...okemons-iv-t3469462/post69651636#post69651636
I just follow this thread, but it seems to work only on post November security patch's. I was using Mokee but for this to work I installed CM13 without any wipes and it works ^^
Envoyé de mon Unsupported MI Cancro en utilisant Tapatalk
Thanks, if it work i give you a kiss ;D
bobslesbricoleurs said:
Thanks, if it work i give you a kiss ;D
Click to expand...
Click to collapse
Haha it will work without problem if you follow the thread Remember, it work better if you have a post November security patch's rom (CM or other) Also you don't really need Magisk for now so remember to install Xposed 86.2 systemless (the only version that would work without Magisk). With correct SuperSu in systemless, Suhide and Root Switch you should be good to play PoGo !
I use Automate as it's quiet annoying to activate every thing before launching PoGo ^^ I have like 4 apps to play xD
Also don't really matter SafetyNet result as my CTS profile always fails but I can play (a full wipe should solve the thing, or maybe a custom kernel, don't know/care for now as I wanted to play PoGo for ages^^)
Good luck !
Envoyé de mon Unsupported MI Cancro en utilisant Tapatalk
I don't play pgo, i just want to activate xposed modules ^^
My security patch is june 2016
Doesn't work, it say framework is active, i activate module but he say he's not activated :'(
bobslesbricoleurs said:
Doesn't work, it say framework is active, i activate module but he say he's not activated :'(
Click to expand...
Click to collapse
Your Xposed installation seems fine. Probably a problem with the module, so you might get better help in the modules thread (search).
And, it's not a good idea to have that "other" module installed if you want help here on xda. This is a developers forum and that app cheats developers...
Is not from the module, but from all modules.
Every modules i activate won't work
Hi!
I might just have a solution for you.
I have my Umi Plus E rooted with supersu and installed xposed.
Now here is the magic trick.
In order to make xposed compatible, I had to flash a fix called grorkmod v1.0, you can find it in the elephone p9000 development threads (sorry, I'm on mobile, so can't post link).
Don't worry that it says p9000 everywhere, it works on a lot of china mtk devices.
Be sure to flash xposed and grorkmod after.
Hope it works for you!
Gesendet von meinem UMI Plus E mit Tapatalk
Related
Hi everybody
Here is my
XPOSED MODULES DESACTIVATOR
If like me you have installed an incompatible Xposed Module causing bootloop
or FC from any system application making it unusable phone (eg CF SystemUI for example),
this is my patch to recover a functional phone !!!
Xposed Modules Desactivator
How to
Copy Xposed Modules Desactivator's zip to the root of your internal card or external card
Flash zip via a Custom Recovery like Philz, TWRP, CWM ... this will disable all modules
Then uninstall incompatible module
Recheck all other modules in the Xposed Installer application to reactivate
Reboot.
Xposed Modules Desactivator to keep safe on its internal or external card,
it will save your life in case of incompatible modules
Enjoy [emoji6]
Awesome
Im not Xposed user's but its a nice job u did it here , congrats ,, simply its useful & very very useful for Xposed users ...
Perfect
thereassaad said:
Im not Xposed user's but its a nice job u did it here , congrats ,, simply its useful & very very useful for Xposed users ...
Click to expand...
Click to collapse
Me too, very long time i dont use xposed[emoji4]
Hi! What's the difference with regular xposed disabler zip?
Inviato dal mio SM-G935F utilizzando Tapatalk
Many Thanks everybody
I had this idea one day i install an incompatible module causing a bootloop to find how to disable.
Very usefull if you don't have any Backup to restore...
Wuby986 said:
Hi! What's the difference with regular xposed disabler zip?
Inviato dal mio SM-G935F utilizzando Tapatalk
Click to expand...
Click to collapse
Regular Xposed its uninstall Xposed framework but with this one its only disabled the Xposed module , edzamber correct me if im understanding wrong ?
thereassaad said:
Regular Xposed its uninstall Xposed framework but with this one its only disabled the Xposed module , edzamber correct me if im understanding wrong ?
Click to expand...
Click to collapse
Exactly [emoji6]
@edzamber
Excellent job with this deactivation zip:good: and a great idea for the Xposed users.
Nice job. Whilst I don't use Xposed myself, I can see it being really useful for those that do.
I appreciate your engagement but afaik you only have to push any hardware button (volume up for example) a few times on boot and xposed is disabled (puts a disabled file in its directory).
So there should be no need for a flashable zip.
Great work @edzamber.
Please tap the thanks button if I helped you. ?
2phazt said:
I appreciate your engagement but afaik you only have to push any hardware button (volume up for example) a few times on boot and xposed is disabled (puts a disabled file in its directory).
So there should be no need for a flashable zip.
Click to expand...
Click to collapse
Really ?
What version of Xposed do you use and witch is your Phone model ?
Because add .disabled file into data/de.robv.android.xposed.installer/conf doesn't working anymore with Xposed Framework up to v71... (since core-libart.jar modded isn't needed)
Just tested volume up few times since boot and any other hardware Keys doesn't disable Xposed on Samsung Galaxy S6 Edge device...
edzamber said:
Really ?
What version of Xposed do you use and witch is your Phone model ?
Because add .disabled file into data/de.robv.android.xposed.installer/conf doesn't working anymore with Xposed Framework up to v71... (since core-libart.jar modded isn't needed)
Just tested volume up few times since boot and any other hardware Keys doesn't disable Xposed on Samsung Galaxy S6 Edge device...
Click to expand...
Click to collapse
Well, I know that it worked, because I used it one time on my s3 - don't know which xposed version it was.
I think 80 or so.
Now I'm not as convinced as I was before and so your efforts might be more useful than I thought ??
2phazt said:
Well, I know that it worked, because I used it one time on my s3 - don't know which xposed version it was.
I think 80 or so.
Now I'm not as convinced as I was before and so your efforts might be more useful than I thought ??
Click to expand...
Click to collapse
Maybe it depend of device...
I have been using this flashable zip to deactivate xposed modules for months now and damn right it's handy especially if you were messing about with incompatible modules .
Sent from my SM-G925F using Tapatalk
This is awesome and I never knew I needed it. No more nandroid shuffling, yay.
Anyone using xposed on the galaxy s7 edge? I have it installed and my phone gets very hot any time I pick it up to use. It goes back to normal after Uninstalling
Sent from my SM-G935F using Tapatalk
Very useful on my F240K . Great work
Sent from my LG-F240K using Tapatalk
Hello!
In this thread we will discuss about the best and our favorite Xposed modules for our Huawei P9 Lite.
For who doesn't know what Xposed framework is:
The Xposed framework, gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
Currently, Xposed is officially supported by rovo89 for Android Lollipop and Marshmellow (5.x - 6.x), and the development for Android Nougat (7.x) is on progress.
Xposed General info thread
Official Xposed thread
So, which Xposed modules have you installed on your device?
My current modules are:
-Amplify
-Android N-ify
-Fingerprint Quick Action
-FingerprintEnabler
-GravityBox
-Greenify
-XInsta
-YouTube AdAway
-YouTube Background Playback
My modules (in addition to the ones you are using):
- Assistant Enabler (enables Google's new assistant)
- Enable Ambient Display (makes it so that device wakes up when a notification arrives - in CM not included)
Hi, how did you manage to install Xposed framework? I did flash it thro twrp and I got a boot loop ..
thanks in advance
raffabraz said:
Hi, how did you manage to install Xposed framework? I did flash it thro twrp and I got a boot loop ..
thanks in advance
Click to expand...
Click to collapse
Which version did you install?
raffabraz said:
Hi, how did you manage to install Xposed framework? I did flash it thro twrp and I got a boot loop ..
thanks in advance
Click to expand...
Click to collapse
Systemless 87.0 is working well http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268.
@Potato997 How did you enable this modules, AndroidN-ify, gravity box and fingerprint enabler don't work for me.
Maybe because I use official Xposed and you use systemless? You should try the official one.
Edit: I am on CyanogenMod which is a AOSP ROM unlike EMUI, that's why some modules do not work on your device.
How did you get Amplify working? I install it with no errors but amplify detect no wakelocks. I have the pro Version.
Gesendet von meinem HUAWEI VNS-L31 mit Tapatalk
JustChris20 said:
How did you get Amplify working? I install it with no errors but amplify detect no wakelocks. I have the pro Version.
Gesendet von meinem HUAWEI VNS-L31 mit Tapatalk
Click to expand...
Click to collapse
Are you on EMUI?
after trying many different xposed version this works best for me without crashing settings etc:
L31-C432B161 -stock
xposed-v86.1-sdk23-arm64-custom-build-by-wanam-20160904
Using:
Amplify
BootManager
FlatStyleBarIndicators
Greenify
Youtube AdAway
Youtube Background Playback
Before Xposed for nougat was official I used the unofficial Xposed by purifyos and had the module "enable ambient display"
it works very fine with the xposed of purifyos but not with the official Xposed. is It possible to fix this ?
I rebooted a few times and also installed the module again and I'm sure that it dont works with the official Xposed.
Same is happening with amplify.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk
You can also add "UNICON".
It's was fully working with the experimental version but partially with the official.
By partially I mean that the already applied icon theme stood, but whenever I open unicon it asks you to activate it even if it's already activated.
All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?
chibichuba said:
All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?
Click to expand...
Click to collapse
same isue with Greenify. It won't work with both official and unofficial
Probably its bug from module itself, dev need to make compability to xposed Nougat official
exodius48 said:
Probably its bug from module itself, dev need to make compability to xposed Nougat official
Click to expand...
Click to collapse
Sadly, that won't happen with Unicon. I was so jazzed to have it working on Nougat but now back to not working.
Word has it Greenify 3.7.1 via apkmirror works on official Xposed.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
The problem lies with the unofficial Xposed.
It generally makes a mess out of your ART cache and even after you uninstall it the cache is left corrupted.
You need to clear your ART cache (from TWRP or FlashFire) before installing the official Xposed.
Xspeed said:
The problem lies with the unofficial Xposed.
It generally makes a mess out of your ART cache and even after you uninstall it the cache is left corrupted.
You need to clear your ART cache (from TWRP or FlashFire) before installing the official Xposed.
Click to expand...
Click to collapse
Did that - no success.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk
chibichuba said:
All my modules aren't working with Xposed 7.0 SDK 24 v88 right now. I did a clean install and modules like Amplify and Greenify, etc aren't working but Xposed Installer says the framework is running. Anyone else experiencing the same?
Click to expand...
Click to collapse
slimli said:
same isue with Greenify. It won't work with both official and unofficial
Click to expand...
Click to collapse
Try v3.7.1, it seems to work.
Edit : it works.
lahceneamine said:
Try v3.7.1, it seems to work.
Edit : it works.
Click to expand...
Click to collapse
But where to download v3.7.1
slimli said:
But where to download v3.7.1
Click to expand...
Click to collapse
It you have just tipped "Greenify 3.7.1" on Google, you would have found it as the first result :
https://www.apkmirror.com/apk/oasis...-release/greenify-3-7-1-android-apk-download/
Same problem with "enable ambient display"
Enviado desde mi SM-G930F mediante Tapatalk
@ Everyone :
Try this version here made by ahrion.
It made unicon work, then it may get some other modules work too !
---------- Post added at 02:05 ---------- Previous post was at 02:03 ----------
marcdw said:
Sadly, that won't happen with Unicon. I was so jazzed to have it working on Nougat but now back to not working.
Word has it Greenify 3.7.1 via apkmirror works on official Xposed.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Read my previous post, You're gonna be happy
lahceneamine said:
Read my previous post, You're gonna be happy
Click to expand...
Click to collapse
You referring to the ahrion link? Yeah I just saw your post in another thread. Directory is empty now but I'll check back in a day or two.
In the meantime I was messing around a bit. Reading things here and there it seems the installer used makes a difference.
My Xposed testing has mostly centered around GravityBox and Unicon. Both worked on Xposed by PurifyOS using @DVDandroid's installer.
After official Xposed came out (and moved to another ROM) I tried again with the recommended official installer.
GB works. Unicon does not. I assumed it didn't work because of Xposed v88.x but...
Disabled modules and rebooted.
Uninstalled 3.1.2 installer and rebooted for good measure. Made sure no cruft was left over.
Installed DVDandroid's installer and activated GB and Unicon.
GB does not work. Unicon works.
Reverting back to official installer, I get the flipside again.
At least that proved to me it isn't the framework that's the main issue.
I await something from ahrion or the next Material Design installer.
LG G3 D851, LiquidSmooth v4.1 ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
You referring to the ahrion link
Click to expand...
Click to collapse
I've spoken with rovo and wanam, they explained to me the main difference with the installers:
- Previous installers (like dvdandroid) put the "enabled module list" into data/data/appid.
- Actual installer (3.1.2) put it in data/user_de/appid.
As unicon has hard coded path, it checks if it's installed in the first folder, that's why it detecte it's activation status with dvdandroid's installer and not with the official one.
Vice Versa with gravity box, cause it has been updated to check into the new folder.
Thanks for that.
I had actually checked those locations previously.
In my desktop days I would've symlinked an expected location to the new one. Here I'll just wait it out and see what happens.
Would be nice if the Unicon dev were to get back in the game, especially since the module still works in general.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
marcdw said:
Thanks for that.
I had actually checked those locations previously.
In my desktop days I would've symlinked an expected location to the new one. Here I'll just wait it out and see what happens.
Would be nice if the Unicon dev were to get back in the game, especially since the module still works in general.
ZTE Axon 7 A2017U, Dark ROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
I would love to see that too, but it's a kind of utopia.
Then, after deep thought, I told myself why wouldn't we ask another dev (especially launchers devs) to create a module like unicon since they already do icon theming through their launchers. They only need to add the "system wide" thing.
Reason I bought this phone was for use of nfc,
Unfortunately bought a Chinese version running global miui 10, bootloader unlocked
I've flashed havoc and magisk I've passed safety net but unable to get Google pay working (uk)
You have to delete Google Play Services folder from /data/data in TWRP file manager.
Found it Gms
Thank you Google pay now. Working
worked fine until star of march... Still no luck for me on latest xaiomi.eu with magisk 18.1 and all hide like your pic
nvm, worked after adding all exclusion and removing google.gms in twrp manager
Disable telephone permissions for google play services. clear data of google pay app and register again. This trick working in india.
Beta version of magisk 19 solved that issue for me.
erbarad said:
Beta version of magisk 19 solved that issue for me.
Click to expand...
Click to collapse
How? What did u do, can u tell me? Step by step?
Nagendra7 said:
Disable telephone permissions for google play services. clear data of google pay app and register again. This trick working in india.
Click to expand...
Click to collapse
Google Pay asks for that permission if disabled... Not working in France.
Any other idea? (currently with MIUI 10.4, xiaomi.eu 9.4.28, Magisk 19.0 and Magisk Manager 7.1.1)
The only filesystem modifications on the phone are Magisk and AdAway.
BTW, can you give me the full path to delete in /data/data?
After erasure of all Google play services data thanks to MIUI UI (550MB), Google Pay still does not work.
Thanks!
Envoyé de mon MI 8 en utilisant Tapatalk
Not working to me... After erase of all Google play services data , Google Pay still does not work.
In TWRP, delete /data/data/com.google.android.gms and activate your credit card in Google Pay app.
For me it is working now!
Good luck [emoji1696]
Envoyé de mon MI 8 en utilisant Tapatalk
szpieg15 said:
Not working to me... After erase of all Google play services data , Google Pay still does not work.
Click to expand...
Click to collapse
Will you working on it ?
After updating MIUI to .26 and applying to the post from the previous page, for now it works.
GaPhi said:
In TWRP, delete /data/data/com.google.android.gms and activate your credit card in Google Pay app.
For me it is working now!
Good luck [emoji1696]
Envoyé de mon MI 8 en utilisant Tapatalk
Click to expand...
Click to collapse
Confirmation! Google pay apk has finally accepted my card. Will update when I test it in store.
Update:
Works! Payed today with my phone!
wow thank you, i guessed it was impossible to make it possible with custom rom and magisk after reading some topics, i just managed to add my card and will try to pay tomorrow
After a new firmware update MIUI EU 9.5.9, it does not work anymore...
Has someone found a more reliable way to have it working?
Envoyé de mon MI 8 en utilisant Tapatalk
Again delete same folder
grof1985 said:
Again delete same folder
Click to expand...
Click to collapse
I did it without success this time...
Envoyé de mon MI 8 en utilisant Tapatalk
I've just checked today, it works perfectly
check this
https://forum.xda-developers.com/apps/magisk/magisk-google-pay-gms-17-1-22-pie-t3929950
Try this. Mine still works perfectly
The Problem:
The App detects the device is rooted and thus redirects to a browser with a message saying it can not be run on a rooted device etc.
What I've got so far:
-Magisk hide does nothing
-https://forum.xda-developers.com/apps/magisk/santander-app-custom-rom-root-device-t3794753/post77321403 A could be hint to a solution
It works once the Magisk app is deleted
My Question:
How could I have Magisk installed and still have the push TAN app work?
APP:https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan&hl=de
Have you renamed magisk apk? There's an option in settings.
Sent from my M2002J9G using Tapatalk
renaming does nothing,here in germany its easy to use push tan apps,in my case and i am by the Sparkasse Leverkusen just go to your Sparkasse and say ur phone is not rooted,just old,after some minutes you can use spush tan app with every root method or magisk!!!!Cheers!!!
TheOne9373 said:
The Problem:
The App detects the device is rooted and thus redirects to a browser with a message saying it can not be run on a rooted device etc.
What I've got so far:
-Magisk hide does nothing
-https://forum.xda-developers.com/apps/magisk/santander-app-custom-rom-root-device-t3794753/post77321403 A could be hint to a solution
It works once the Magisk app is deleted
My Question:
How could I have Magisk installed and still have the push TAN app work?
APP:https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.pushtan&hl=de
Click to expand...
Click to collapse
I have seen this post today and remebered your problem, check this out.
https://forum.xda-developers.com/apps/magisk/guide-how-to-hide-root-bank-applications-t4172127
Enviado de meu POCOPHONE F1 usando o Tapatalk
[email protected] said:
I have seen this post today and remebered your problem, check this out.
https://forum.xda-developers.com/apps/magisk/guide-how-to-hide-root-bank-applications-t4172127
Enviado de meu POCOPHONE F1 usando o Tapatalk
Click to expand...
Click to collapse
It does not work on this application, the problem is solved by the latest magisk manager 8.0.0 and repackaging it to a different name, hiding S-pushTAN and it works :highfive:
Spartacus500 said:
It does not work on this application, the problem is solved by the latest magisk manager 8.0.0 and repackaging it to a different name, hiding S-pushTAN and it works :highfive:
Click to expand...
Click to collapse
Confirmed with DKB PushTAN App
I tried it like this, but it's still not working. What magisk version are you on?
Dark_Lion64 said:
I tried it like this, but it's still not working. What magisk version are you on?
Click to expand...
Click to collapse
Today New version magisk manager update
pushTAN App by Sparkasse is not working with LOS 18.1 @OP6 with latest Magisk 23. Any solutions?
Hi guys
After a while of test try test try So on. I find a solution that work for the one of my devices that I use for. Its a huawei p10 lite. So first it had openkirin lineagos 16 build 6 but this Firmware have to many little Bugs like Bluetooth no connection with Mi Band Smartwatch but with soundbar no problem, then camera Bug...often it doesn't safe the createt pics and vids. Thats very argh when snapshots not safe and not Anke to reproduce, and some other. Some time goes by and now I have lineagos 18.1 for p8 lite 2017 codename prague. The p10 lite warsaw WAS-LX1A working well with it. I just had to downgrade the Stock ROM from 8.0.0C432B398 to B378 for headshot the build number error. The settings in magisk should be clear for every one...i think
So first I reboot TWRP and clear Cache and Dalvik. Reboot to System and adjust magisk (hide and repack) the repack needs a little while so just keep cool and wait. Then install the pushtan App Version 1.50. ask Google for apk. Or pm me and I send you This is the last that working for me. My different magisk version I use was 19.3 phh, 20,4 phh and one for Android 11. that is moddet for huawei p10 lite. Take a look in xda forum and you will find it. If the normal magisk for A11 running on your device then use it. On huawei we need the mod one.
So now the apk was installed you first open magisk and choose pushtan in hide Option. Then reboot to TWRP and delete Cache and Dalvik again. After that you can reboot to System...fingerscross could not be wrong in this moment hihi...now the great moment is coming. Start the app and your Facial expression would show if it work or not for me it does.
Hmmm Warum schreibe ik eigentlich english bei ner Sparkassen App xD
So good luck for you
solong
speedson
Pundy said:
pushTAN App by Sparkasse is not working with LOS 18.1 @OP6 with latest Magisk 23. Any solutions?
Click to expand...
Click to collapse
Use Magisk Canary, use Hide Magisk for "S-pushTAN", Repack Magisk with another name like "Manager" f.e. , get the App "Airfrozen" and freeze Magisk Manager with it.
After this steps you can use "S-pushTAN" without any problems.
If its still not working after that, make sure everything named "Magisk" like ZIPs or Folders are deleted.
bLack_Q said:
Use Magisk Canary, use Hide Magisk for "S-pushTAN", Repack Magisk with another name like "Manager" f.e. , get the App "Airfrozen" and freeze Magisk Manager with it.
After this steps you can use "S-pushTAN" without any problems.
If its still not working after that, make sure everything named "Magisk" like ZIPs or Folders are deleted.
Click to expand...
Click to collapse
Thank you very much! Now it works.
Renaming the App and Airfrozen is the key.
Pundy said:
Thank you very much! Now it works.
Renaming the App and Airfrozen is the key.
Click to expand...
Click to collapse
Nice, glad I could help. If you dont use "S-pushTAN" anymore you can simply unfreeze Magisk.
bLack_Q said:
Nice, glad I could help. If you dont use "S-pushTAN" anymore you can simply unfreeze Magisk.
Click to expand...
Click to collapse
Not working with comdirect phototan.
Any suggestions?
Laptapper said:
Not working with comdirect phototan.
Any suggestions?
Click to expand...
Click to collapse
Unfortunately I have never used that app. But if I come up with something I will let you know.