Help!!! imei invalid A7000-a Lenovo - Lenovo A7000 Questions & Answers

Hi guys , My phone Lenovo a7000 has a problem
imei invalid and when I used an apk file which requires root , it failed . I tried alot of solutions but all failed ...
can anyone help? :laugh:

Use champelphone app from play store

Sarath256 said:
Use champelphone app from play store
Click to expand...
Click to collapse
I used it but the same problem

Me too , anyone help?

If you lost your IMEI after flashing ROM,you can recover it using this method
How to check your Phone IMEI:
TYPE *#06# at phone dialer and came out-
Example
1)123456789012345(This is the normal IMEI)
2)INVALID IMEI(Lost/Invalid IMEI)
What you need:
1.MobileUncle Tool apk.
2Your IMEI number(Copy the IMEI of the phone box or from the bottom / top of the battery)
Step by Step
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER HERE"
- Press SEND AT COMMAND
8. For Phone 2, write:
AT + EGMR = 1.10, "IMEI_2 NUMBER HERE"
Press SEND AT COMMAND
9. Restart Phone n Done
Dial * # 06 # to check your IMEI
#TO GET YOUR SECOND IMEI NUMBER,JUST ADD 8 TO THE LAST 3 DIGIT OF YOUR FIRST IMEI
EXAMPLE:xxx xxx xxx xxx 123+8=xxx xxx xxx xxx 131 is your second IMEI Number

mohamedkaram said:
Hi guys , My phone Lenovo a7000 has a problem
imei invalid and when I used an apk file which requires root , it failed . I tried alot of solutions but all failed ...
can anyone help? :laugh:
Click to expand...
Click to collapse
Try maui meta app its fully work and permanent

Related

[Q] CP

I played around with smartflash yesterday and i checked the 'erase entire cp' which will erase my imei , thinking that it would unlock me full market access because the play store checks the imei to determine the country restrictions . when the phone booted up, it showed a strange korean message which i could not read and the only english letters were 'CP' . i think that had to do with me checking the 'erase entire cp'. now,where ever i go there is no signal , i think my phone is blacklisted because it did not have a imei . is there any way to flash a imei to my phone ?
Well I had to do this when my phone got security error. I found a tutorial in XDA, sorry I'm at school so I can't search it for you but I had to use Hyperterminal (try to Google : restore imei hyperterminal xda).
EDIT : What is strange is that my network was working fine and no strange message was showing, not like you.
Sent from my LG-P970 using xda premium
http://forum.xda-developers.com/showthread.php?t=1447311
Sobralobo said:
Well I had to do this when my phone got security error. I found a tutorial in XDA, sorry I'm at school so I can't search it for you but I had to use Hyperterminal (try to Google : restore imei hyperterminal xda).
EDIT : What is strange is that my network was working fine and no strange message was showing, not like you.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
netum said:
http://forum.xda-developers.com/showthread.php?t=1447311
Click to expand...
Click to collapse
Thank you !!!!!!!! but not at computer right now , can't do it
The tutorial did not explain clearly , i cannot find COM settings in hyperterminal and what i type in hyperterminal would not show up . hyperteminal would not detect my device , it only detected COM 17(my phone) in S/W Upgrade Mode .PLEASE HELP , i don't want to spend money buying another phone or go to the service center
So, you need to switch usb mode from AP to CP from hidden menu 3845#*970#. Then when you create a new connection choose com 24 or smth like that. it will work! just try more.
radkor said:
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
Click to expand...
Click to collapse
Redpik said:
So, you need to switch usb mode from AP to CP from hidden menu 3845#*970#. Then when you create a new connection choose com 24 or smth like that. it will work! just try more.
Click to expand...
Click to collapse
But there is no COM settings in hyperterminal..........and what i type in hyperterminal doesnt show up
Sent from my LG-P970 using xda premium
I now know what caused the problems! It was because i did not disable my sim security before i flashed the ics rom so my phone doesn't recognises the umts network after i flashed it .But after i flashed another gb rom, the problem becomes like pemanent or some sort of thing...............phone still cannot call........The problem most likely had to do with one of the ics roms and part of the problem should be of the 'erase entire cp' thing

s5830 lost IMEI

Is there anyway I can get my IMEI back from my s5830 I managed with mt s5830i but things just arent the same?
Is there a way to get to my efs folder?
Please help ASAP
anyone help me
Sent from my GT-S5830i using xda premium
Follow..
1.You need to be on stock ROM
2.Phone has to be rooted
3.Dial *#7284# on phone's keypad
4.Click Qualcomm USB Settings
5.Select RMNET + DM + MODEM and click ok
6.Download QPST and install it QPST
7.Connect T999 to Windows PC with USB cable (make sure you have all Samsung drivers installed and working)
8. In Windows open Device Manager, go to Ports (COM&LPT) and look up what port your T999 is using
9.Open QPST Configuration program
10.Click Add new port
11. Enter port (for example "COM6") from step 8 to boxes "Port" and "Port Label"
12.Open QPST RF NV Item Manager program
13.From top menu click on Settings then Comport
14. In Comport Configuration window click on drop down menu and select your port from Step 8 then click OK
15. In RF NV Item Manager click on Read Supported NV RF Items (first toolbar button or select it from File menu on the top)
16. Below on left side go to line number 550 and click on it
17. On the right side, check box "Hex" this will display 9 boxes below where you enter your IMEI
18. You enter it in pairs of 2 digits and backwards
Example:
your IMEI is 353024052511214
8 (this number is not part of your IMEI but has to be entered)
3a (first digit of your IMEI ,"a" has to be there also)
35
20
04 (this can be written as just 4 also)
25
15
21
41
19. Click Write NV button
20.You can reboot and disconnect your phone now.
21. On your phone's keypad dial *#7284# go to settings and check MTP + ADB to go back to original state.
Or refer to this thread.
http://forum.xda-developers.com/showthread.php?t=1802024
Hi does this method work? I have tried QPST it read phone nv fine but when writing i get
Exception Thrown!! error
NvManager;;writeToPhonoe( const string comPort ) -
QpstServer;;sendSynclmpl - Error
Code = 80004005.
It seem like the phone is stopping the writing of the imei. Any ideas? Is this method confirmed working on s5830 not (i).
[email protected]
[email protected] said:
Hi does this method work? I have tried QPST it read phone nv fine but when writing i get
Exception Thrown!! error
NvManager;;writeToPhonoe( const string comPort ) -
QpstServer;;sendSynclmpl - Error
Code = 80004005.
It seem like the phone is stopping the writing of the imei. Any ideas? Is this method confirmed working on s5830 not (i).
[email protected]
Click to expand...
Click to collapse
I have the same problem with my S5830. Any solution?
hi I can't see the hidden menù after pressing the code in the dialpad, sorry for my bad english i'm Italian

[Q] IMEI corrupted !

Friends Help me when start to use my phone after flashing after some days sim network didn't show and i didn't know what happen, then when check the imei *#06# it is empty !
Help me !
I tried upgrade, downgrade to all the official and unofficial frimwares but the imei is ' empty '
I also i tried the android emulator tweaks ! nothing help me !
Please help me !
I didn't try this one,
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
Because it fail when i use the ports when .........
If anyone knows help me to write my origianl imei !

[GUIDE] [SEED ONLY] FIX YOUR DEVICE'S IMEIs (NO SIGNAL)

MESSAGE ME FOR THE DOWNLOADABLE FILES, I CANNOT PUT THE LINK, IM JUST A NEW MEMBER HERE. THANK YOU​
REQUIREMENTS
adb and USB drivers (if you’re already installed this drivers, skip this)
QPST
Hex Editor
IMEI Converter
.qcn file
Rooted phone (recommended)
Getting your IMEI:​
You can get your IMEI at your phone factory box or inside the phone, and take note them to notepad.​
Setting up your phone:​
Go to Settings/About and rapidly tap the Build Number, until the “You are now a developer” appears, then go back to Settings/Developer options.
Enable USB debugging mode
Connect your device to your computer, and if your phone notifies an RSA key, press Remember my Choice, and press Allow/Accept.
Go to Command Prompt or Windows PowerShell on your computer, then type this command:
Code:
adb shell
su
setprop sys.usb.config diag,adb
Don’t disconnect your phone. We will use it later on QPST.
Converting IMEI to Hex values:​
Open IMEI Converter.exe
Type your IMEI 1 then press convert, copy the converted IMEI to your notepad.
Type your IMEI 2 then press convert, copy again the converted IMEI to your notepad.
Editing your .qcn file:​
Open the .qcn file you’ve downloaded on HxD
Find (Ctrl +F) “08 8A 56 48 03 42 40 12 43”, set Datatype to “Hex-values,” and Search Direction to “All.”
Replace it with your converted IMEI 1 earlier.
Find again “08 8A 56 48 03 42 40 12 24”
Replace it with your converted IMEI 2 earlier.
Save it to Desktop for easy find.
Restoring .qcn:​
Install QPST.exe or Setup.exe, and wait to finish installation.
After the installation, search and open QPST Configuration.
Go to Ports/Add New Port, uncheck “Show Serial and USB/QC Diagnostics only,” click OK.
A new port will appear on the box.
Go to Start Clients/Software Download. Navigate to “Restore” tab.
If your Device/COM appears on “Port,” browse your .qcn file that you edited earlier, and open it.
Click “Start,” and wait for the process to finish.
Exit QPST and reboot your device.
Finally, checking your IMEI:​
On your device, go to Dialer/Phone, then dial *#06#.
It will show the 2 IMEIs of your device.
CONGRATULATIONS!!!!!!!!!!!!!​
:victory::victory::victory::victory::good::laugh:​
HELP
Does it need to be rooted? I have non-rooted, stock Android One 2nd-Gen that have NO SIGNAL. All connections (WiFi, Bluetooth) are OK. Cellular signal is NOT OK.
HEXEDIT
i put the qcn on hexedit and search with the converted imei NO MATCH FOUND where i did it wrong
turx said:
Does it need to be rooted? I have non-rooted, stock Android One 2nd-Gen that have NO SIGNAL. All connections (WiFi, Bluetooth) are OK. Cellular signal is NOT OK.
Click to expand...
Click to collapse
if you managed to switch on your diag mode without rooting then its OK. Otherwise you can' t use
Code:
phone:$ su
.
Qcn
bro i need qcn file for Find (Ctrl +F) “08 8A 56 48 03 42 40 12 43
bro my mi a1 is not showing imei and have noo network signal, please share files so i can perform above operation
no works in Huawei kirin 960 ????
aureliomilitao said:
no works in Huawei kirin 960 ????
Click to expand...
Click to collapse
bro its work only qualcom
[email protected] said:
i put the qcn on hexedit and search with the converted imei NO MATCH FOUND where i did it wrong
Click to expand...
Click to collapse
same here bro plzz help somebody
Imei related issue
In. Hex editor when i search in converted imei it says cant find plzz help
I did it on my Redmi 7 device QFIL status is successful but imei is not updating
This Method is only valid for Qualcomm devices ,what for MTK devices like redmi note 8 pro like stuffs plz reply
Note 8 Qualcomm after restore QCN imei back but signals not working, what missing ?
PHONE IS ROOTED BUT DIAG MODE NOT SHOWING
Redmi Note 8T, phone is rooted.
adb shell
willow:/ $ su
Permission denied
13|willow:/ $

IMEI permanent fix

hey guys please tell me how to fix IMEI permanently, and my signal reception is very poor , is anyone facing this problem?:crying:
i have the same problem when i try to put imei code through chamelophone in android nougat roms
no signals are showing and also no imei code :crying::crying::crying::crying:
Requirements:
- MobileUncle Tool apk.
- Your IMEI number(you can find it below the battery)
How to:-
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,
Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER"
- Press SEND AT COMMAND
NOTE : double inverted quotes are part of the code.and there should be a space between AT and +.
8. For Phone 2,
write:
AT + EGMR = 1.10, "IMEI_2 NUMBER"
Press SEND AT COMMAND
9. Restart Phone
Dial *#06# and check your IMEI.

Categories

Resources