Hello i need help. I was on OOS 4.0. Like to update to 4.0.1 with clean System. So i boot to TWRP and make fullwipe(format:data/system/cache-dalvik cache)
After flash the 4.0.1 twrp says no os install. Ihave test another rom from this side https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015 but no way.
After that i flash stock recovery (fastboot) and stock rom via adb sideload but after 46% the installation failed (3 times).
Sorry for bad english and thanks for all
I read somewhere that TWRP is not compatible with the OSS 4.0 or higher and that's why you get errors when trying to install them. So, to make it work you gotta install the newest and beta version of TWRP...
Here you go, as I already said, it's a beta version, I'm not 100% sure if it'll work...
https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.3-1-beta1-oneplus3t.img
enzzo28 said:
I read somewhere that TWRP is not compatible with the OSS 4.0 or higher and that's why you get errors when trying to install them. So, to make it work you gotta install the newest and beta version of TWRP...
Here you go, as I already said, it's a beta version, I'm not 100% sure if it'll work...
https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.3-1-beta1-oneplus3t.img
Click to expand...
Click to collapse
I installed OSS 4.0 without issues on TWRP 3.0.3.
It sounds more like a bad download to me. Try to redownload the file and flash it again.
RL77LUC said:
I installed OSS 4.0 without issues on TWRP 3.0.3.
It sounds more like a bad download to me. Try to redownload the file and flash it again.
Click to expand...
Click to collapse
Could you install it?
There's a way to flash the 36MB OTA file in TWRP without downloading the full 4.0.1 zip.
I think the OTA fails and gets stuck because of SuperSU or Magisk modifies the boot.img
So, you could try this:
1. Dirty flash the full 4.0 zip
2. Flash 4.0.1
3. Flash SuperSU/Magisk
Sent from my OnePlus 3T using XDA Labs
enzzo28 said:
Could you install it?
There's a way to flash the 36MB OTA file in TWRP without downloading the full 4.0.1 zip.
I think the OTA fails and gets stuck because of SuperSU or Magisk modifies the boot.img
So, you could try this:
1. Dirty flash the full 4.0 zip
2. Flash 4.0.1
3. Flash SuperSU/Magisk
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
TWRP can't install partial OTA updates.
It can install full 4.0 ZIP, but AFAIK, it can't install partial updates.
RL77LUC said:
TWRP can't install partial OTA updates.
It can install full 4.0 ZIP, but AFAIK, it can't install partial updates.
Click to expand...
Click to collapse
Have you tried reading solutions about the last OTA on other XDA's posts?
I've been reading just to spend time and they have found a lot of solutions to some errors with TWRP
Sent from my OnePlus 3T using XDA Labs
enzzo28 said:
Have you tried reading solutions about the last OTA on other XDA's posts?
I've been reading just to spend time and they have found a lot of solutions to some errors with TWRP
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Not really, as I moved to LineageOS.
I just wanted to say that 4.0 worked fine for me , so his error shouldn't be because of that.
RL77LUC said:
Not really, as I moved to LineageOS.
I just wanted to say that 4.0 worked fine for me , so his error shouldn't be because of that.
Click to expand...
Click to collapse
Alright man, it's great that you've found a way to install another rom ✌?
Sent from my OnePlus 3T using XDA Labs
Hey
So my op3t is back in live.
OS is 3.5.4 bootloader unlock.
Twrp is installed but not working (is the beta for 4.0.1)...
First I will working Twrp for nano backup.
Then root on the last official os
What the best way for me I don't will brick my device second time
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Related
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/…/0ByD3oqJ_...0;/view…
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/…/0ByD3oqJ_...0;/view…
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Thanks but 3. 2.6 files do not found
No link works!
Just go find another link if these here don't work ...
There is a thread with all official firmwares. Or just use Google.
Sent from my OnePlus 3 using Tapatalk
3.2.4 https://drive.google.com/file/d/0ByD3oqJ_uj0VWjVMbmZoZS1kejg/view
3.2.6 https://drive.google.com/file/d/0ByD3oqJ_uj0VZUFjblBSbEVNRGs/view?usp=sharing
XDA app screwed the links
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
This is strange..
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
Could it be that your bootloader is now locked again after using the unbrick tool?
DavidXanatos said:
Could it be that your bootloader is now locked again after using the unbrick tool?
Click to expand...
Click to collapse
No it's unlocked i checked
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
geekynoob said:
This is strange..
Click to expand...
Click to collapse
I know...
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
EdHicks said:
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
Click to expand...
Click to collapse
It's easy mate..
Flash rr and then flash the 3.2.4 fw.. As u have a good twrp now.. Simple..
geekynoob said:
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Click to expand...
Click to collapse
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
z31416 said:
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
Click to expand...
Click to collapse
Nice u will get a black screen..
geekynoob said:
Nice u will get a black screen..
Click to expand...
Click to collapse
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
Modded twrp can be used to flash 3.2.6 or 3.5.2 oos.. Now if u want to go back.. Using the modded twrp flash the 3.2.4 files.. Just reboot recovery now flash non modded twrp as u have 3.2.4 files official twrp will work.. And then flash any rom u want..
green. said:
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
Click to expand...
Click to collapse
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
geekynoob said:
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
Click to expand...
Click to collapse
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
This will do it. It's how I got going. I went from stock rooted 3.2.6 OOS to RR 5.7.4.
Thanks for putting to words for others.
green. said:
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
Click to expand...
Click to collapse
I've done a bit of Dev.. But i am not sure about ur statement.. .. And cm based roms don't have fw files.. Feel like a noob lol..
Hi folks,
I'm considering taking my OP3T from 4.1.6 to the just released 4.1.7, more to get rid of the nag notification than anything else. But I want to double check the process since this will be my first update since I got the phone.
I have TWRP and Magisk root.
Would the process be to download the entire full package, not just the OTA, flash it from TWRP, then reflash TWRP and Magisk before booting? Or would I need to flash via fastboot based on what is available?
I will make a TWRP backup of the whole thing and copy it to PC before starting anything, but would rather not klutz around.
Is there an update guide that spells it out for the case of being rooted and TWRP enabled?
Thanks
Sent from my ONEPLUS A3000 using Tapatalk
OTA will be enough, just copy the ota zip to the phone and then flash it via TWRP, reflash Magisk and boot the system. No need for full package or TWRP reflash.
przemcio510 said:
OTA will be enough, just copy the ota zip to the phone and then flash it via TWRP, reflash Magisk and boot the system. No need for full package or TWRP reflash.
Click to expand...
Click to collapse
Ok thanks! I hear wiping cache is also good plan while I'm in TWRP. Thank you!
Sent from my ONEPLUS A3000 using Tapatalk
Frankenscript said:
Ok thanks! I hear wiping cache is also good plan while I'm in TWRP. Thank you!
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Yes, forgot to mention about it
I think you should download the complete OS zip. Have a look at the thread below in OnePlus forum.
[Guide] How to update rooted stock rom to 4.1.7 without loosing root? https://forums.oneplus.net/threads/...ock-rom-to-4-1-7-without-loosing-root.610565/
przemcio510 said:
OTA will be enough, just copy the ota zip to the phone and then flash it via TWRP, reflash Magisk and boot the system. No need for full package or TWRP reflash.
Click to expand...
Click to collapse
Nope,
You are wrong.
For rooted systems, you need to flash the whole 1.4gb Rom.
Also, for the OP, no need to reflash TWRP. It won't be affected by the flashing of the rom.
Unleashed by ONEPLUS 3T rooted
RASTAVIPER said:
Nope,
You are wrong.
For rooted systems, you need to flash the whole 1.4gb Rom.
Also, for the OP, no need to reflash TWRP. It won't be affected by the flashing of the rom.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
So, flash the whole ROM (which apparently doesn't include recovery since that's a separate download) in TWRP, then Magisk, then clear cache/dalvik?
Sent from my ONEPLUS A3000 using Tapatalk
RASTAVIPER said:
For rooted systems, you need to flash the whole 1.4gb Rom
Click to expand...
Click to collapse
Oh, didn't notice the downloads from oneplus.net are 1,4GB in size
Frankenscript said:
So, flash the whole ROM (which apparently doesn't include recovery since that's a separate download) in TWRP, then Magisk, then clear cache/dalvik?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Exactly!
This is how I did it too.
Unleashed by ONEPLUS 3T rooted
Hi, I'm currently running MIUI Global 9.0 Stable 9.0.3.0 (NDDMIEI) in my Mi Max 2.
I have followed the guide to install the TWRP 3.1.1 and have rooted via Magisk method and running it.
I have received the OTA update V9.2.1.0.NDDMIEK and is downloaded automatically.
I'm guessing I can't install this OTA downloaded update via TWRP? Do I have to wait for the flashable zip of this update?
Or should I unroot, flash stock recovery and then do the OTA update, and then repeat the TWRP and Magisk again?
Thank you for any help.
I have same problem. Anybody can help ? Thanks !
Sent from my MI MAX 2 using Tapatalk
amgreenhawk said:
Hi, I'm currently running MIUI Global 9.0 Stable 9.0.3.0 (NDDMIEI) in my Mi Max 2.
I have followed the guide to install the TWRP 3.1.1 and have rooted via Magisk method and running it.
I have received the OTA update V9.2.1.0.NDDMIEK and is downloaded automatically.
I'm guessing I can't install this OTA downloaded update via TWRP? Do I have to wait for the flashable zip of this update?
Or should I unroot, flash stock recovery and then do the OTA update, and then repeat the TWRP and Magisk again?
Thank you for any help.
Click to expand...
Click to collapse
You can let it update, with no problem at all. After you hit the restart to apply update button, it will direct you to TWRP and you can flash the OTA update using twrp. It will not cause bootloop, or whatsoever. You will just need to hit the restart button after TWRP have flashed the OTA and it will reboot to apply update. However, you will need to flash TWRP again if you didn't change something in the terminal cuz Miui recovery will replace twrp. It's like a code to make TWRP to replace MIUI recovery permanently. ( It has a guide somewhere in this forum to teach you how to use TWRP to replace MIUI recovery permanently) Ok, so if you didn't change the code, you have to flash TWRP everytime you update via OTA. I flash TWRP again and again nearly every week after OTA cuz I'm on developer rom and developer rom nearly updates every week. So the main point is, no worries ya. You can go ahead and flash the OTA as it won't cause bootloop.
Chip Liang said:
You can let it update, with no problem at all. After you hit the restart to apply update button, it will direct you to TWRP and you can flash the OTA update using twrp. It will not cause bootloop, or whatsoever. You will just need to hit the restart button after TWRP have flashed the OTA and it will reboot to apply update. However, you will need to flash TWRP again if you didn't change something in the terminal cuz Miui recovery will replace twrp. It's like a code to make TWRP to replace MIUI recovery permanently. ( It has a guide somewhere in this forum to teach you how to use TWRP to replace MIUI recovery permanently) Ok, so if you didn't change the code, you have to flash TWRP everytime you update via OTA. I flash TWRP again and again nearly every week after OTA cuz I'm on developer rom and developer rom nearly updates every week. So the main point is, no worries ya. You can go ahead and flash the OTA as it won't cause bootloop.
Click to expand...
Click to collapse
Sory but I can't update update.Zip file via TWRP. Is errors. I think the update.zip file only could update via miui stock recovery or we must modified update.zip file for updade via TWRP.
Sent from my MI MAX 2 using Tapatalk
LP.DUKU said:
Sory but I can't update update.Zip file via TWRP. Is errors. I think the update.zip file only could update via miui stock recovery or we must modified update.zip file for updade via TWRP.
Click to expand...
Click to collapse
Hmm....wait. So you go to TWRP and flash the rom? I mean, you manually reboot into recovery, and then manually flash the OTA? It can't be done like that, for sure will get error. What i meant and what i always did is let the download manager downloaded the OTA package( The download manager is in the "about phone" section), then after done downloading, press reboot and it will automatically direct you to TWRP and it flashes the OTA packages automatically and will be succesful. But if your problem still persists, i have no idea what's going on. Maybe the global rom OTA packages is different from Developer's one.
As for me, the first time my phone downloaded the incremental update which was a few hundred MB in size, when I pressed update, it went to TWRP. But from there nothing happened. It just showed the home screen of the TWRP. After waiting for a few minutes, I simply rebooted using TWRP's menu.
When returned to system, the phone said the update was not successful and mentioned something about downloading full rom. When I woke up, it had completed download the full rom which is 1.43GB.
I haven't updated yet, using MIUI menu, until I want to make sure how to correctly update without problems.
I don't mind reflashing TWRP and and MAGISK again, though. Just wanted to update without getting into some sort of trouble which may prolong the process of getting back to normal working status.
Just made a TWRP backup.
Thanks for any suggestions.
Chip Liang said:
Hmm....wait. So you go to TWRP and flash the rom? I mean, you manually reboot into recovery, and then manually flash the OTA? It can't be done like that, for sure will get error. What i meant and what i always did is let the download manager downloaded the OTA package( The download manager is in the "about phone" section), then after done downloading, press reboot and it will automatically direct you to TWRP and it flashes the OTA packages automatically and will be succesful. But if your problem still persists, i have no idea what's going on. Maybe the global rom OTA packages is different from Developer's one.
Click to expand...
Click to collapse
Oh. Sorry ! I understanded what you mean. I was trying this yesterday.Miui just download a page.zip 254MB after press restart,my device auto boot to twrp and...... nothing happened [emoji23]. And just now, I do it again. Miui download a Page.zip 1.4 GB and after I press reboot. My device booted to TWRP and automatic install update. And after restart system, now my device has updated to miui ver 9.2.1.0 ? .thanks !
Sorry. My English is very bad
Sent from my MI MAX 2 using Tapatalk
LP.DUKU said:
Oh. Sorry ! I understanded what you mean. I was trying this yesterday.Miui just download a page.zip 254MB after press restart,my device auto boot to twrp and...... nothing happened [emoji23]. And just now, I do it again. Miui download a Page.zip 1.4 GB and after I press reboot. My device booted to TWRP and automatic install update. And after restart system, now my device has updated to miui ver 9.2.1.0 ? .thanks !
Sorry. My English is very bad
Click to expand...
Click to collapse
Wow, I'm so glad and happy that i solve your problem!? As for your English, bro, it's ok? I'm a Malaysian and English as well is not my native language. Just we can understand each others it's ok already.:victory:
---------- Post added at 08:48 AM ---------- Previous post was at 08:46 AM ----------
amgreenhawk said:
As for me, the first time my phone downloaded the incremental update which was a few hundred MB in size, when I pressed update, it went to TWRP. But from there nothing happened. It just showed the home screen of the TWRP. After waiting for a few minutes, I simply rebooted using TWRP's menu.
When returned to system, the phone said the update was not successful and mentioned something about downloading full rom. When I woke up, it had completed download the full rom which is 1.43GB.
I haven't updated yet, using MIUI menu, until I want to make sure how to correctly update without problems.
I don't mind reflashing TWRP and and MAGISK again, though. Just wanted to update without getting into some sort of trouble which may prolong the process of getting back to normal working status.
Just made a TWRP backup.
Thanks for any suggestions.
Click to expand...
Click to collapse
Just try the method again and see if that solves your problem!:laugh:
Yes, reflashing again with the full rom worked.
Now, to reflash TWRP and MAGISK again.
Thank you!
amgreenhawk said:
Yes, reflashing again with the full rom worked.
Now, to reflash TWRP and MAGISK again.
Thank you!
Click to expand...
Click to collapse
You're welcome!:victory:
just in case you guys havent seen it yet: there is a thread in the rom & kernel section that offers stock miui roms as regular twrp flashable zips
link:
https://forum.xda-developers.com/showthread.php?p=75360690
oh and btw, this thread belongs into the questions/answers/help section, not the rom & kernel section
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
amgreenhawk said:
Hi, I'm currently running MIUI Global 9.0 Stable 9.0.3.0 (NDDMIEI) in my Mi Max 2.
I have followed the guide to install the TWRP 3.1.1 and have rooted via Magisk method and running it.
I have received the OTA update V9.2.1.0.NDDMIEK and is downloaded automatically.
I'm guessing I can't install this OTA downloaded update via TWRP? Do I have to wait for the flashable zip of this update?
Or should I unroot, flash stock recovery and then do the OTA update, and then repeat the TWRP and Magisk again?
Thank you for any help.
Click to expand...
Click to collapse
Hope this helps to https://forum.xda-developers.com/showpost.php?p=75446250&postcount=5 i'm updating the OTA updates with same methods.
jbmc83 said:
just in case you guys havent seen it yet: there is a thread in the rom & kernel section that offers stock miui roms as regular twrp flashable zips
link:
https://forum.xda-developers.com/showthread.php?p=75360690
oh and btw, this thread belongs into the questions/answers/help section, not the rom & kernel section
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
the link you have provided is not a stock miui rom updates. its only the twrp flashable firmware update packages which is very helpful for people using custom roms. custom rom users can update firmware packages without flashing stock MIUI for each MIUI update
reversegear said:
Hope this helps to https://forum.xda-developers.com/showpost.php?p=75446250&postcount=5 i'm updating the OTA updates with same methods.
the link you have provided is not a stock miui rom updates. its only the twrp flashable firmware update packages which is very helpful for people using custom roms. custom rom users can update firmware packages without flashing stock MIUI for each MIUI update
Click to expand...
Click to collapse
no need for custom roms, u only need twrp. so if u prefer twrp flashing but still keeping stock miui firmware, this is a nice option. other than the twrp install routine there is nothing changed in those roms.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
jbmc83 said:
no need for custom roms, u only need twrp. so if u prefer twrp flashing but still keeping stock miui firmware, this is a nice option. other than the twrp install routine there is nothing changed in those roms.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
FYI this links does not contains any roms. its only the firmware folder extraction. if you are in stock rom then these firmware folder is updated via OTA or recovery flashable updates
reversegear said:
FYI this links does not contains any roms. its only the firmware folder extraction. if you are in stock rom then these firmware folder is updated via OTA or recovery flashable updates
Click to expand...
Click to collapse
i just noticed: i posted the wrong link!
here is the thread that i was actually talking about: https://forum.xda-developers.com/showthread.php?p=75360690
sorry about the mix up
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Hi my oneplus 3t is on Oreo 5.0.2. I flashed twrp recovery nd super su root but when I restarted the phone it's stuck on black screen with white oneplus logo.what should I do now?my phone is going into twrp recovery
Should I flash stock oos 5.0.2 from twrp recovery? Pls guide
mannulko said:
Hi my oneplus 3t is on Oreo 5.0.2. I flashed twrp recovery nd super su root but when I restarted the phone it's stuck on black screen with white oneplus logo.what should I do now?my phone is going into twrp recovery
Should I flash stock oos 5.0.2 from twrp recovery? Pls guide
Click to expand...
Click to collapse
For starters, posting the same question in four different threads is something you shouldn't do. You could have just used the Q&A thread too ask for help.
To fix your phone, reflash the full 5.0.2 zip, if you have it. Otherwise, flash the full 5.0.1 zip, reboot your phone (you'll lose TWRP, but that's ok), then flash the 5.0.2 OTA. That should bring your phone back to normal 5.0.2.
Sent from my OnePlus3T using XDA Labs
BillGoss said:
For starters, posting the same question in four different threads is something you shouldn't do. You could have just used the Q&A thread too ask for help.
To fix your phone, reflash the full 5.0.2 zip, if you have it. Otherwise, flash the full 5.0.1 zip, reboot your phone (you'll lose TWRP, but that's ok), then flash the 5.0.2 OTA. That should bring your phone back to normal 5.0.2.
Click to expand...
Click to collapse
Thanks bro my phone is now working I followed your steps.thanks
Now I want to install root pls guide me ND give me links to compatible twrp recovery ND root files
mannulko said:
Thanks bro my phone is now working I followed your steps.thanks
Now I want to install root pls guide me ND give me links to compatible twrp recovery ND root files
Click to expand...
Click to collapse
TWRP: Try using the latest official TWRP (unified for 3 and 3T) from https://dl.twrp.me/oneplus3/
Or the Blu Spark v8.61 TWRP from https://forum.xda-developers.com/on...vice-development/kernel-t3404970/post67463496
For root, use the latest Magisk (you can find it for yourself).
Sent from my OnePlus3T using XDA Labs
BillGoss said:
TWRP: Try using the latest official TWRP (unified for 3 and 3T) from https://dl.twrp.me/oneplus3/
Or the Blu Spark v8.61 TWRP from https://forum.xda-developers.com/on...vice-development/kernel-t3404970/post67463496
For root, use the latest Magisk (you can find it for yourself).
Click to expand...
Click to collapse
Thanks
I want to know which version of magisk is compatible with op3t 5.0.2
mannulko said:
Thanks
I want to know which version of magisk is compatible with op3t 5.0.2
Click to expand...
Click to collapse
The latest
Sent from my OnePlus3T using XDA Labs
BillGoss said:
The latest
Click to expand...
Click to collapse
I am going to use twrp-3.2.1-0-oneplus3.img ns magisk 16.0.zip
Pls confirm if it's ok for OnePlus 3T
mannulko said:
I am going to use twrp-3.2.1-0-oneplus3.img ns magisk 16.0.zip
Pls confirm if it's ok for OnePlus 3T
Click to expand...
Click to collapse
Sent from my OnePlus3T using XDA Labs
BillGoss said:
Click to expand...
Click to collapse
One more thing after installing twrp recovery should I take back up on twrp ND then flash magisk?
mannulko said:
One more thing after installing twrp recovery should I take back up on twrp ND then flash magisk?
Click to expand...
Click to collapse
Yes, always make backups
mannulko said:
One more thing after installing twrp recovery should I take back up on twrp ND then flash magisk?
Click to expand...
Click to collapse
You should always make a TWRP backup before flashing any mods (root, custom ROM, etc.). This is a good basic rule of thumb for any Android device.
The fact that you started this thread trying root, failed, and had no backup to restore, should have made the answer to this question obvious. Always try to learn from your experiences!
Hey ppl, just installed it on my 3t, but when I try to install magisk, it says successful in TWRP, but when I boot up into system, it says not rooted. BUT the system partition is full and I can read it, but not write... There is some weird issue. Can anyone follow my problem?:silly:
Overall nice, what OnePlus did
Pic
svandasek said:
Pic
Click to expand...
Click to collapse
Reflashing the Magisk zip solves the issue I suppose. It fixed it for me on some other ROMs too.
Sent from my #FlagshipKiller3T using Tapatalk
DarkSJ1998 said:
Reflashing the Magisk zip solves the issue I suppose. It fixed it for me on some other ROMs too.
Sent from my #FlagshipKiller3T using Tapatalk
Click to expand...
Click to collapse
I was trying, even tried to flash oos in between so that boot.img is stock again... No chance, tried SuperSU , and it says root isn't installed correctly on device.
svandasek said:
I was trying, even tried to flash oos in between so that boot.img is stock again... No chance, tried SuperSU , and it says root isn't installed correctly on device.
Click to expand...
Click to collapse
You probably didn't have magisk manager installed, check it? If that's the case download apk from Magisk thread and installing should deal with the issue.