Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
You should find the link in here. If I remember right b166 is a full rom but read the thread first the info is in there.
Sorry those links aren't working, try http://m.huawei.com/ukmobile/ and near the bottom is a download tab, think the rom you are after is there
C_Duk said:
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
You should find the link in here. If I remember right b166 is a full rom but read the thread first the info is in there.
Sorry those links aren't working, try http://m.huawei.com/ukmobile/ and near the bottom is a download tab, think the rom you are after is there
Click to expand...
Click to collapse
Hi,
When i try yo get on http://m.huawei.com/ukmobile/ its says 403 Forbidden...
Thats what I am saying I am seriously struggling to find working source.
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
This is a C432 build.
Version B136 lastly before B182
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Update: U mean L19 not L09 my bad!
I just clicked that link and got the same as you. If you go on www.huawei.com, click on the consumer tab near the top of the page, when the next page loads click on the pic on of p9, scroll down to support which is near the bottom and the download tab is there
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
U have it here, tested and download works.
https://uloz.to/!XdlqYNNPwXiY/eval19-c432b161-update-zip
Or
https://uloz.to/!gN8EPBnRAQhe/eva-l19c432b182-update-zip
Sent from my VIE-L29 using XDA Labs
Can't you use L09 then OTA update and you get L19?
Thanks very much but it doesn't work on my phone. I think i have damaged it permanent... I did try fastbooting cust, cash, boot, system, userdata, recovery etc but I am not getting anywhere...
Hisuite says that this phone isnt supported so I have no idea what to do... I was hoping that maybe SP-Flash could help but I don't even have a scattered file to try...
Very worried that I have just thrown away a lot of money (( Do you think that huawei service may help with such issue? ofc i will pay rather than do it on a warranty but if they could fix it, I am assuming it will be less than what i've paid for the phone....
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
azgooon said:
Thanks very much but it doesn't work on my phone. I think i have damaged it permanent... I did try fastbooting cust, cash, boot, system, userdata, recovery etc but I am not getting anywhere...
Hisuite says that this phone isnt supported so I have no idea what to do... I was hoping that maybe SP-Flash could help but I don't even have a scattered file to try...
Very worried that I have just thrown away a lot of money (( Do you think that huawei service may help with such issue? ofc i will pay rather than do it on a warranty but if they could fix it, I am assuming it will be less than what i've paid for the phone....
Click to expand...
Click to collapse
Can you get into fastboot mode?
If yes, no worrie!
You will not be able to unlock your bootloader once you forgot to enable the OEM.
If your stock recovery is intact you can use the force update "dload"
Have you tried with same build but L09 instead L19?
If it does not work, it is because your stock recovery is corrupted or has been replaced in this case your only option is DC Phoenix.
You need 15 credits if you do not have a Dongle, you will receive a username and password. DC Phoenix allows you to flash the UPDATE.APP even with the bootloader and FRP is locked.
You can write a L19 firmware C432 with no problem! But choose a previos version like b136 instead b180.
Fastboot mode.
ChaseRxx said:
Can you get into fastboot mode?
If yes, no worrie!
You will not be able to unlock your bootloader once you forgot to enable the OEM.
If your stock recovery is intact you can use the force update "dload"
Have you tried with same build but L09 instead L19?
If it does not work, it is because your stock recovery is corrupted or has been replaced in this case your only option is DC Phoenix.
You need 15 credits if you do not have a Dongle, you will receive a username and password. DC Phoenix allows you to flash the UPDATE.APP even with the bootloader and FRP is locked.
You can write a L19 firmware C432 with no problem! But choose a previos version like b136 instead b180.
Fastboot mode.
Click to expand...
Click to collapse
Hi,
Yes, I can get to the fastboot.
I am just looking at the dc-unlocker and dc-phoenix. Would you know, if my phone originally was AL-10, should I flash it with AL-10 firmware and than rebrand it again? or just go for L09 or L19 straight away?
Thank you!!!
sorry for not reporting back sooner but in the end I had to flash my phone with a factory stock for AL-10, then installed Chinese firmware, unlocked it, root it, twrp, srktools, changed oem info, reinstalled L09C432B136, got update straight away and now I am happy as fu*&^* ))))!!!!!!!! MAN, YOU ARE WALKING LEGEND. THANKS VERY MUCH!!!! for 15 euro i have saved myself all hassles with finding a service, posting phone, being without phone for a weeks, and paying silly fees for a repairs, where they could easily say that ie. motherboard needs replacing and I could spend even more...
You don't even know how much I appreciate it!
BTW, when i reflashed factory soft, i got a bit scared that it says Huawe Ascend, but then it turned out that this is literally factory os which is designed to upload proper model software
now i just need to update IMEI number but luckily for one sim card I got it written in a log from DC-phoenix and for another one i hope I will find it somewhere in a twrp backups which i did a few days ago.
THANKS AGAIN!!!!!!
Related
Hey everyone,
So I got a P9 Plus and I tried to force the Android 7.0 EMUI 5.0 update on it, it didn't work..probably because I made a mistake which I'm unaware of.
Problem is, I'm away from home and I don't have the Box with me with the bootloader code, which means I can't really do it again right?
I tried using DC unlocker 2 and DC Pheonix but both failed, when I got to the eRecovery menu and tried to update from there (I used a B103 build, pasted in a dload folder on the SDcard) it says can't install update or something like that, my build before everything was VIE-L09C900B181, can't seem to find a stock ROM for that build (I gotta mention I'm really new to all of this when it comes to phone stuff, I'm used to work with CMD and Linux but this is territory unknown for me lol). Any advice? What can I do? When I try to restore it or force a factory reset it also says "Reset failed" right away...I'm lost you guy....PLEASE HELP ME
First of all if u have a P9 Plus and search for firmware in the p9 forum you are in the wrong place.
Did u ever made an OTA? I think dload tries the internal storage first so maybe this is why your dload attempt did not work - try formatting internal storage with fastboot (dont know if u can)
Basically you just have to find the right firmware. Maybe you need to downgrade first.
But again you are in the "P9" forum so you are probably wrong since you are talking about an "P9 Plus".
xtcislove said:
First of all if u have a P9 Plus and search for firmware in the p9 forum you are in the wrong place.
Did u ever made an OTA? I think dload tries the internal storage first so maybe this is why your dload attempt did not work - try formatting internal storage with fastboot (dont know if u can)
Basically you just have to find the right firmware. Maybe you need to downgrade first.
But again you are in the "P9" forum so you are probably wrong since you are talking about an "P9 Plus".
Click to expand...
Click to collapse
My bad, guess I didn't do enough research to see that there was a P9 Plus section, sorry about that.
An OTA? Sorry like I said I'm pretty new to this, I had the build that ends with 181 and I tried using the 103 build but I always get errors, can't seem to find a 181 build online to download.
Thanks for the reply by the way
CelticJ said:
My bad, guess I didn't do enough research to see that there was a P9 Plus section, sorry about that.
An OTA? Sorry like I said I'm pretty new to this, I had the build that ends with 181 and I tried using the 103 build but I always get errors, can't seem to find a 181 build online to download.
Thanks for the reply by the way
Click to expand...
Click to collapse
Where you from my friend? We probably get around this ****....
We need some way to communicate faster, u have Steam or Origin or something?
xtcislove said:
Where you from my friend? We probably get around this ****....
We need some way to communicate faster, u have Steam or Origin or something?
Click to expand...
Click to collapse
Try dc-phoenix but be careful with factory flash. avoid it if you don't have all partitions backed up.
I had to flash it with factory soft and now i stuck with unbricked phone but not being able to make phone calls
After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[
Maybe you should try this, it may find the proper firmware for your device.
Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite
If this is P8 Lite 2017, we have seperate subforum for it :highfive:
D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!
Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much
Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.
Hey!
So I bricked my Huawei P10 Lite.
Modell number is WAS-LX1, the 3GB/32GB version
And it ran WAS-LX1C432B127
So I tried to flash the stock rom, but I couldn't find the exact same rom, only WAS-LX1AC432
I downloaded different versions from it from different sites, and flashed them with huawei multi tool, but none of them worked, I have no sound and NFC keeps turning on-and of.
I couldn't even find the same version with Firmware Finder.
Please help me guys I have read the whole internet
Hi buddy !
With some guys we have the same problem so join us, the name's topic is: Huawei P10 Lite Bricked?
I have already done some things so maybe it will help you too ! Sorry for my bad english i'm french ^^
Radnaksi98 said:
Hi buddy !
With some guys we have the same problem so join us, the name's topic is: Huawei P10 Lite Bricked?
I have already done some things so maybe it will help you too ! Sorry for my bad english i'm french ^^
Click to expand...
Click to collapse
Hey! Thanks for ur reply! Since that, while I was flashing different firmwares, somehow I relocked my bootloader, and ended up in eRecovery bootloop, and because my bootloader was locked, I couldn't flash firmwares anymore. But, to reunlock the bootloader, I needed the unlock code, which I lost, and to obtain a new one I eneded the product ID which is only accessible by the dialer. So, I decided to use funkyhuawei. As I Said, I had a WAS-LX1 with WAS-LX1C432B127. So, on funkyhuawei I chose WAS-LX1C432, but it couldn't find the update with eRecovery. I tried WAS-LX1AC432 too, but without success. So, I satrted to try all WAS-LX1 adn LX1A firmwares. I was able to install a WAS-LX1AC02 firmware. Now my phone think it's a LX1A and has no software upgrade option, but other than that it 100% works. As I see u are in serious trouble, I can feel ur pain. I have 3 credits left on my funkyhuawei account. It was pretty expensive, but I want to give u 1 free flash. I would give all of u in trouble, but maybe I will need it later So PM me if u want a flash and I can help u
Armin.K said:
Hey! Thanks for ur reply! Since that, while I was flashing different firmwares, somehow I relocked my bootloader, and ended up in eRecovery bootloop, and because my bootloader was locked, I couldn't flash firmwares anymore. But, to reunlock the bootloader, I needed the unlock code, which I lost, and to obtain a new one I eneded the product ID which is only accessible by the dialer. So, I decided to use funkyhuawei. As I Said, I had a WAS-LX1 with WAS-LX1C432B127. So, on funkyhuawei I chose WAS-LX1C432, but it couldn't find the update with eRecovery. I tried WAS-LX1AC432 too, but without success. So, I satrted to try all WAS-LX1 adn LX1A firmwares. I was able to install a WAS-LX1AC02 firmware. Now my phone think it's a LX1A and has no software upgrade option, but other than that it 100% works. As I see u are in serious trouble, I can feel ur pain. I have 3 credits left on my funkyhuawei account. It was pretty expensive, but I want to give u 1 free flash. I would give all of u in trouble, but maybe I will need it later So PM me if u want a flash and I can help u
Click to expand...
Click to collapse
I also bricked my p10 lite...
So if you're possible please give me a credit?
Sorry for my english.
Hi people, i bricked my huawei p10 lite was-lx2. Unlock and twrp. anyone have the firmware? I google it already but does not found any. WAS-LX2C636B130 dual-sim malaysia. Or if there is the way i can debrand it with "dual-sim and support my telco" firmware. tell me if its possible.
I have the same problem. After spending some time I found the problem.
For me it looks like one of the product or vendor partition is ****ed up, so it cant load the drivers from there. Since the files are OK it could be a signature problem. I started copying the smaller part ion in the bigger ones, because it fits in there... And the sound and bootlogo are working fine. BUT no camera. Later I saw some hard-coded paths so the problem was not really fix yet.
When you disable se-linux in the boot partition (Kerner parameter) all working fine. Bootlogo, sound, camera, nfc... I don't know why this happened. I used my own backup partition and the stock you can download.. Nothing works. If anyone has an idea how to get back to real stock that would be great because I want to have ota updates back working
Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.
eskeyo said:
Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.
Click to expand...
Click to collapse
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone
Armin.K said:
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone
Click to expand...
Click to collapse
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.
eskeyo said:
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.
Click to expand...
Click to collapse
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.
Armin.K said:
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.
Click to expand...
Click to collapse
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?
eskeyo said:
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?
Click to expand...
Click to collapse
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?
Armin.K said:
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?
Click to expand...
Click to collapse
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .
eskeyo said:
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .
Click to expand...
Click to collapse
No problem
Hello everyone i'm looking for a specific firmware, the PRA-LX1C55B120, i can't get a hold of it from FirmwareFinder, is there another source? Thanks in advance
Anyone?
https://mobiletech360.co/huawei-p8-lite-2017-stock-firmwarerom-android-7-nougat-pra-lx1/
there is a link for c55b183 but even though you download it, i doubt that you can use the dload or twrp to install the firmware.
marstonpear said:
https://mobiletech360.co/huawei-p8-lite-2017-stock-firmwarerom-android-7-nougat-pra-lx1/
there is a link for c55b183 but even though you download it, i doubt that you can use the dload or twrp to install the firmware.
Click to expand...
Click to collapse
Thanks for the answer, but i already can get that from FirmwareUpdater, the one i need is the B120, which is on FU, but apparently the link is broken.
Also why you say that? I think i should be capable of flashing with adb.
oxidyzed said:
Thanks for the answer, but i already can get that from FirmwareUpdater, the one i need is the B120, which is on FU, but apparently the link is broken.
Also why you say that? I think i should be capable of flashing with adb.
Click to expand...
Click to collapse
I haven't tried the adb method as it may screw up your phone if anything goes wrong. On the other hand I tried dload method many times but it always gave me an error. My phone was named P9Lite2017 and it was PRA-LX1 C464, so I installed PRA-LX1C432b191 via Firmware finder, and now I can't even revert back to the C464. I bricked my phone many times too but recovered it thx to erecovery. Still the phone doesn't like it when you change its firmware. Cheers
marstonpear said:
I haven't tried the adb method as it may screw up your phone if anything goes wrong. On the other hand I tried dload method many times but it always gave me an error. My phone was named P9Lite2017 and it was PRA-LX1 C464, so I installed PRA-LX1C432b191 via Firmware finder, and now I can't even revert back to the C464. I bricked my phone many times too but recovered it thx to erecovery. Still the phone doesn't like it when you change its firmware. Cheers
Click to expand...
Click to collapse
Understood, but the erecovery doesn't work for me, every time i try it fails getting the "package from the server"
oxidyzed said:
Understood, but the erecovery doesn't work for me, every time i try it fails getting the "package from the server"
Click to expand...
Click to collapse
I don't know bro, erecovery saved my ass a couple of times, and whenever I screw up the system I just boot into erecovery and tap on 'Download Latest Version and Recovery'. It makes the device like new. Never faced the problem you're facing though.
marstonpear said:
I don't know bro, erecovery saved my ass a couple of times, and whenever I screw up the system I just boot into erecovery and tap on 'Download Latest Version and Recovery'. It makes the device like new. Never faced the problem you're facing though.
Click to expand...
Click to collapse
Ok, will see if i can try something else