Hey everyone,
So I got a P9 Plus and I tried to force the Android 7.0 EMUI 5.0 update on it, it didn't work..probably because I made a mistake which I'm unaware of.
Problem is, I'm away from home and I don't have the Box with me with the bootloader code, which means I can't really do it again right?
I tried using DC unlocker 2 and DC Pheonix but both failed, when I got to the eRecovery menu and tried to update from there (I used a B103 build, pasted in a dload folder on the SDcard) it says can't install update or something like that, my build before everything was VIE-L09C900B181, can't seem to find a stock ROM for that build (I gotta mention I'm really new to all of this when it comes to phone stuff, I'm used to work with CMD and Linux but this is territory unknown for me lol). Any advice? What can I do? When I try to restore it or force a factory reset it also says "Reset failed" right away...I'm lost you guy....PLEASE HELP ME
First of all if u have a P9 Plus and search for firmware in the p9 forum you are in the wrong place.
Did u ever made an OTA? I think dload tries the internal storage first so maybe this is why your dload attempt did not work - try formatting internal storage with fastboot (dont know if u can)
Basically you just have to find the right firmware. Maybe you need to downgrade first.
But again you are in the "P9" forum so you are probably wrong since you are talking about an "P9 Plus".
xtcislove said:
First of all if u have a P9 Plus and search for firmware in the p9 forum you are in the wrong place.
Did u ever made an OTA? I think dload tries the internal storage first so maybe this is why your dload attempt did not work - try formatting internal storage with fastboot (dont know if u can)
Basically you just have to find the right firmware. Maybe you need to downgrade first.
But again you are in the "P9" forum so you are probably wrong since you are talking about an "P9 Plus".
Click to expand...
Click to collapse
My bad, guess I didn't do enough research to see that there was a P9 Plus section, sorry about that.
An OTA? Sorry like I said I'm pretty new to this, I had the build that ends with 181 and I tried using the 103 build but I always get errors, can't seem to find a 181 build online to download.
Thanks for the reply by the way
CelticJ said:
My bad, guess I didn't do enough research to see that there was a P9 Plus section, sorry about that.
An OTA? Sorry like I said I'm pretty new to this, I had the build that ends with 181 and I tried using the 103 build but I always get errors, can't seem to find a 181 build online to download.
Thanks for the reply by the way
Click to expand...
Click to collapse
Where you from my friend? We probably get around this ****....
We need some way to communicate faster, u have Steam or Origin or something?
xtcislove said:
Where you from my friend? We probably get around this ****....
We need some way to communicate faster, u have Steam or Origin or something?
Click to expand...
Click to collapse
Try dc-phoenix but be careful with factory flash. avoid it if you don't have all partitions backed up.
I had to flash it with factory soft and now i stuck with unbricked phone but not being able to make phone calls
Related
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
You should find the link in here. If I remember right b166 is a full rom but read the thread first the info is in there.
Sorry those links aren't working, try http://m.huawei.com/ukmobile/ and near the bottom is a download tab, think the rom you are after is there
C_Duk said:
https://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
You should find the link in here. If I remember right b166 is a full rom but read the thread first the info is in there.
Sorry those links aren't working, try http://m.huawei.com/ukmobile/ and near the bottom is a download tab, think the rom you are after is there
Click to expand...
Click to collapse
Hi,
When i try yo get on http://m.huawei.com/ukmobile/ its says 403 Forbidden...
Thats what I am saying I am seriously struggling to find working source.
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
This is a C432 build.
Version B136 lastly before B182
https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Update: U mean L19 not L09 my bad!
I just clicked that link and got the same as you. If you go on www.huawei.com, click on the consumer tab near the top of the page, when the next page loads click on the pic on of p9, scroll down to support which is near the bottom and the download tab is there
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
U have it here, tested and download works.
https://uloz.to/!XdlqYNNPwXiY/eval19-c432b161-update-zip
Or
https://uloz.to/!gN8EPBnRAQhe/eva-l19c432b182-update-zip
Sent from my VIE-L29 using XDA Labs
Can't you use L09 then OTA update and you get L19?
Thanks very much but it doesn't work on my phone. I think i have damaged it permanent... I did try fastbooting cust, cash, boot, system, userdata, recovery etc but I am not getting anywhere...
Hisuite says that this phone isnt supported so I have no idea what to do... I was hoping that maybe SP-Flash could help but I don't even have a scattered file to try...
Very worried that I have just thrown away a lot of money (( Do you think that huawei service may help with such issue? ofc i will pay rather than do it on a warranty but if they could fix it, I am assuming it will be less than what i've paid for the phone....
azgooon said:
Hi,
I can't find anywhere full recovery dload content for EVA-L19C432.
Since, the huawei servers are inaccesible from the web browser I am having troubles with restoring bricked phone.
Could anyone please help with a link?
Thanks.
Click to expand...
Click to collapse
azgooon said:
Thanks very much but it doesn't work on my phone. I think i have damaged it permanent... I did try fastbooting cust, cash, boot, system, userdata, recovery etc but I am not getting anywhere...
Hisuite says that this phone isnt supported so I have no idea what to do... I was hoping that maybe SP-Flash could help but I don't even have a scattered file to try...
Very worried that I have just thrown away a lot of money (( Do you think that huawei service may help with such issue? ofc i will pay rather than do it on a warranty but if they could fix it, I am assuming it will be less than what i've paid for the phone....
Click to expand...
Click to collapse
Can you get into fastboot mode?
If yes, no worrie!
You will not be able to unlock your bootloader once you forgot to enable the OEM.
If your stock recovery is intact you can use the force update "dload"
Have you tried with same build but L09 instead L19?
If it does not work, it is because your stock recovery is corrupted or has been replaced in this case your only option is DC Phoenix.
You need 15 credits if you do not have a Dongle, you will receive a username and password. DC Phoenix allows you to flash the UPDATE.APP even with the bootloader and FRP is locked.
You can write a L19 firmware C432 with no problem! But choose a previos version like b136 instead b180.
Fastboot mode.
ChaseRxx said:
Can you get into fastboot mode?
If yes, no worrie!
You will not be able to unlock your bootloader once you forgot to enable the OEM.
If your stock recovery is intact you can use the force update "dload"
Have you tried with same build but L09 instead L19?
If it does not work, it is because your stock recovery is corrupted or has been replaced in this case your only option is DC Phoenix.
You need 15 credits if you do not have a Dongle, you will receive a username and password. DC Phoenix allows you to flash the UPDATE.APP even with the bootloader and FRP is locked.
You can write a L19 firmware C432 with no problem! But choose a previos version like b136 instead b180.
Fastboot mode.
Click to expand...
Click to collapse
Hi,
Yes, I can get to the fastboot.
I am just looking at the dc-unlocker and dc-phoenix. Would you know, if my phone originally was AL-10, should I flash it with AL-10 firmware and than rebrand it again? or just go for L09 or L19 straight away?
Thank you!!!
sorry for not reporting back sooner but in the end I had to flash my phone with a factory stock for AL-10, then installed Chinese firmware, unlocked it, root it, twrp, srktools, changed oem info, reinstalled L09C432B136, got update straight away and now I am happy as fu*&^* ))))!!!!!!!! MAN, YOU ARE WALKING LEGEND. THANKS VERY MUCH!!!! for 15 euro i have saved myself all hassles with finding a service, posting phone, being without phone for a weeks, and paying silly fees for a repairs, where they could easily say that ie. motherboard needs replacing and I could spend even more...
You don't even know how much I appreciate it!
BTW, when i reflashed factory soft, i got a bit scared that it says Huawe Ascend, but then it turned out that this is literally factory os which is designed to upload proper model software
now i just need to update IMEI number but luckily for one sim card I got it written in a log from DC-phoenix and for another one i hope I will find it somewhere in a twrp backups which i did a few days ago.
THANKS AGAIN!!!!!!
After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[
Maybe you should try this, it may find the proper firmware for your device.
Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite
If this is P8 Lite 2017, we have seperate subforum for it :highfive:
D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!
Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much
Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.
Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.
eskeyo said:
Hello there,
Hope is not a dupped issue, I readed a lot in your forum and found nothing in there.
Yes, I bricked my brand new p10 lite messing around with it, here is my scenario right now:
I'm only able to boot to erecovery or the force flash (the vol+ plus vol- stuff)
In no one on that menus I'm able to do anything from getting errors (no rom works on the force flash part, and the erecovery drives me no where)
Seems that I'm not able to boot on fastboot, no matter what I do.
I started unlocking the boot and it worked, then flashing TWRP didn't work, at that moment the phone still booted. Then I tried to flash manually the system and boot from fastboot, and I think that is the point where I messed things.
I don't have the original rom (was WAS-LX1AC02B113), I tried mostly every rom similiar that I found on the internet with no luck so far.
Anyone knows how to "force" a rom into the force flash?
Thanks in advance, and sorry for my english.
Click to expand...
Click to collapse
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone
Armin.K said:
To force a rom, you should download the update zip for your phone, and extract the UPDATE.app from it. Then take a sdcard, create a folder called dload on it, put the UPDATE.app there, the boor into force-update.
Or there is an easier, but paid way, FunkyHuawei, that was the only thing that worked on my phone
Click to expand...
Click to collapse
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.
eskeyo said:
Thanks for the answer. Yea I do know that way, but it keep saying "update failed", no matter what rom I put into the SD card.
Click to expand...
Click to collapse
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.
Armin.K said:
I read it somewhere that this method doesn't work anymore.
Then, your only chance is FunkyHuawei, I had the exact same problem.
Click to expand...
Click to collapse
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?
eskeyo said:
I really appreciate your interest, but I prefer to avoid FunkyHuawei
I'll probably send it to tech support before that.
Also if they don't let you use that method... Do they put another one? Or just let us.... Uncovered?
Click to expand...
Click to collapse
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?
Armin.K said:
I have to say that we are uncovered by Huawei's side
What do u mean by tech support? Do u have a Huawei shop in your area?
Click to expand...
Click to collapse
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .
eskeyo said:
Good job Huawei
I do have a multi-brand tech support but I need to send it to them. Probably I'll send it today, will see if they are able, or they want to fix it. I'll keep you updated, thanks for your replys .
Click to expand...
Click to collapse
No problem
Dear All!
Here is one desperate guy turning to you because I see from some XDA posts, that you know about twrp and Huawei devices quite something.
At first, I don't want to waste your time. If you can help me, I will be happy to compensate it because I'm quite serious on this (and desperate as well).
I'm a beginner on Android rooting world, and in a nutshell, I enjoy just putting my Android device to the limits and enjoy using them to the fullest.
Bad thing, that I sometimes take too much risk and this time it ended with a (Soft) bricked phone.
The phone is from a rental company, that is why I'm so stressed to get it back and going.
So getting to the point:
Device: Huawei P10, VTR-L29C432B123
(C432, as I understand, is European version and it's important here)
Current state: Device is unlocked, rooted and with TWRP 3.1.1. (TWRP installed by this post https://forum.xda-developers.com/p10/development/testers-twrp-t3585256 and rooted by this post https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946)
After installing TWRP and Rooting device I happily enjoyed using it for some time but
things went wrong when I started to try to put back Stock rom. (+ unroot and lock the device as well).
I tried multiple posts on the internet and didn't succeed. Unfortunately, FLashify and alike apps didn't work (or crashed after installing) on my P10, therefore, I turned to TWRP.
At first, I tried to install stock firmware downloaded from Firmware Finder but TWRP put out error:
E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip '/external_sd/dload-draft/update.zip
Then I tried some other ways and turned to wipe section. Deleted Catches and data and then also system. This I believe f-ed things up and (of course) I could not boot anymore.
Can you instruct me on installing Stock rom for my device and get it back and running?
Thank you very much and please let me know if some more info is necessary!
@paratox @OldDroid @XePeleato @Dejan Kruljac Guys, if you could take a look on this and give me a direction - I would be enormously thankful!
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
What does it mean to debrand a device?
It helped. Jeezh
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Jaunpetrovics said:
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Click to expand...
Click to collapse
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
M1chiel said:
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
Click to expand...
Click to collapse
He's right. My P10 had no os installed no recovery and the huawei e recovery wasnt working, this thing will fix the most bricked of phones. 10/10 would brick again. :good:
Would my phone work ?
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
edit : I have relocked my bootloader which leaves me no TWRP
Would this also work for me (VTR-L09)
I bought the phone from Vodafone Australia and I am stuck in erecovery right now, when I try to update through the dload using a FAT32 sd card the update.app won't even copy onto the sd card as it is larger than 4GB. When I try to do it using an sd card formatted to NTFS it stops at 5% and states "software install failed!"
Please help me on what to do... any help would be appreciated
Huawei P20 lite dead
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
YulmarRSA said:
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
Click to expand...
Click to collapse
I can assume that your memory is out of order.
I understood correctly, when you turn on the cubes? You did not flash board firmware?
Good day. I have the Huawei P9 EVA-L09 model and my build number is C432B386.
I tried rooting my phone a couple of months ago and failed, so I gave up. Yesterday I tried flashing TWRP, it said it was successful, but while trying to enter it, I always get the "Your device can't be trusted... Your device is booting now." I completely gave up on rooting or flashing another ROM so I went to relock my bootloader. It was successful, but while the factory reset part, I got an error in eRecovery (Package download failed or something like that) and after that I restarted my phone and it was factory reseted. My problem is, eRecovery now says that my partition is heavily damaged and needs a wipe. So I tried doing that and it failed again. Now I'm left with a Huawei P9 that doesn't have any stock apps and I can't activate bluetooth (and who knows what else doesn't work but I haven't discovered yet)
If anyone could help, I would be grateful. I don't even know where to start fixing this. I just want my phone back or the MagicRainbow v3 ROM, but I'm not skilled enough to fix this alone.
I am just a beginner, too, so maybe you should wait for more experienced answers...
I would try to find the original images and flash them via fastboot. As far as I understand it, this would fix the corrupted partition.
But again, I still have little knowledge and an almost bricked phone!
McSvenster said:
I am just a beginner, too, so maybe you should wait for more experienced answers...
I would try to find the original images and flash them via fastboot. As far as I understand it, this would fix the corrupted partition.
But again, I still have little knowledge and an almost bricked phone!
Click to expand...
Click to collapse
The partition is fixed, thank you. But I still have a lot of problems. My bluetooth won't work and I no longer have any stock apps. I don't know what to do...
Could you tell we, which ROM you have installed? Is it the stock-ROM, or MagicRainbow? If it is a custom ROM you might need a gapps-package like in LineageOS...
If you want to get back to stock, you can create a dload folder in your sdcard and put the update app in it. Than a restart with a special key combination (power, vol down and vol up I believe) will install it.
I'd strongly advice you to read in this forum how to do this, as you need the right recovery corresponding to your ROM, as far as I understood.
I did this with a wrong ROM and now have a phone with no keyboard, only google voice recognition... So be careful!
I would download and install by DLOAD folder the downgrade package... Then flash a full firmware b136 or 182
But you have to be on cust c432 as far as I know.
There are a lot of info regarding dowgarde to MM. Look for it and take your time to be sure the steps to follow
Enviado desde mi EVA-L09 mediante Tapatalk