Database Develop

[Solved]HTC Bootloop without RUU

Hey guys, today I was determined to change my CID in order to get the 4.2.2 update as fast as possible. So, I was running 4.1.1 Rooted on a deodexed stock rom. In order to make the CID change, tried to flash with the HTC RUU. Since there is no RUU for O2 germany, I looked my radio version up and downloadaded the European RUU. The Bootloader had to be relocked, and then is when the TRAGEDY happened. I got stuck in Bootloop. I tried everything and every RUU(errors 151, 150, 131 etc) that is out there without any luck. Finally, after about 12 hours of continious trying and screaming, i found the solution.
1) flashed cwm recovery ( did nor recognize my internal storage )
2) flashed TWRP recovery and formated the internal storage (still bootloop)
3) pushed via AIO Tool sideload the latest CM10
4) cryed for about 15 min of happiness.
I am just making this post in order to help other noobs like me who do not want to go to experts that will charge you hundrets of euros/dollars/yens what ever, and make a fool out of you. I hope this helps you. After this I donated a considerable amount of money to the TWRP, CM and AIO developers, since they have done an amazing job creating these tools and they should be rewarded. Think about it and appreciate effort of others.
ps: I am swiss, so pardon my english
any cronstructive criticism, comments are welcome

Why didn't you just flash a 4.2.2 rom and update your firmware? Much simpler than trying to force an OTA.

iElvis said:
Why didn't you just flash a 4.2.2 rom and update your firmware? Much simpler than trying to force an OTA.
Click to expand...
Click to collapse
I am fan of the stock htc version. and correct me if i am wrong, but there is no 4.2.2 out yet that you can flash with custom recovery.

upsch2000 said:
I am fan of the stock htc version. and correct me if i am wrong, but there is no 4.2.2 out yet that you can flash with custom recovery.
Click to expand...
Click to collapse
You're wrong. There are plenty in the Development section. Here's one:
http://forum.xda-developers.com/showthread.php?t=2348502

iElvis said:
You're wrong. There are plenty in the Development section. Here's one:
http://forum.xda-developers.com/showthread.php?t=2348502
Click to expand...
Click to collapse
lol, thanx , i did not see it.

Htc Pico software issue
upsch2000 said:
Hey guys, today I was determined to change my CID in order to get the 4.2.2 update as fast as possible. So, I was running 4.1.1 Rooted on a deodexed stock rom. In order to make the CID change, tried to flash with the HTC RUU. Since there is no RUU for O2 germany, I looked my radio version up and downloadaded the European RUU. The Bootloader had to be relocked, and then is when the TRAGEDY happened. I got stuck in Bootloop. I tried everything and every RUU(errors 151, 150, 131 etc) that is out there without any luck. Finally, after about 12 hours of continious trying and screaming, i found the solution.
1) flashed cwm recovery ( did nor recognize my internal storage )
2) flashed TWRP recovery and formated the internal storage (still bootloop)
3) pushed via AIO Tool sideload the latest CM10
4) cryed for about 15 min of happiness.
I am just making this post in order to help other noobs like me who do not want to go to experts that will charge you hundrets of euros/dollars/yens what ever, and make a fool out of you. I hope this helps you. After this I donated a considerable amount of money to the TWRP, CM and AIO developers, since they have done an amazing job creating these tools and they should be rewarded. Think about it and appreciate effort of others.
ps: I am swiss, so pardon my english
any cronstructive criticism, comments are welcome
Click to expand...
Click to collapse
My htc pico cannot run any custom rom.
I have unblocked it by htcdev but have S-on
cid : htc__102
I also cannot revert back to stock because i cannot find any ruu matching my cid
also cannot s-off or change my cid .
I did alot but couldn't find the solution.
Please help me ... I'll be very thankful to u

saiqhussain said:
My htc pico cannot run any custom rom.
I have unblocked it by htcdev but have S-on
cid : htc__102
I also cannot revert back to stock because i cannot find any ruu matching my cid
also cannot s-off or change my cid .
I did alot but couldn't find the solution.
Please help me ... I'll be very thankful to u
Click to expand...
Click to collapse
copy ur custom rom in sd card then flash it via recovery all will be ok
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
http://forum.xda-developers.com/showthread.php?t=1911242 here you can download recovery

lasertec_06 said:
copy ur custom rom in sd card then flash it via recovery all will be ok
---------- Post added at 06:22 PM ---------- Previous post was at 06:16 PM ----------
http://forum.xda-developers.com/showthread.php?t=1911242 here you can download recovery
Click to expand...
Click to collapse
I did it . I flashed many custom roms but my phone cannot run them properly means android UI cannot be displayed properly like with patches on the screen i can hardly see the options . and after some time i gets hang.

saiqhussain said:
I did it . I flashed many custom roms but my phone cannot run them properly means android UI cannot be displayed properly like with patches on the screen i can hardly see the options . and after some time i gets hang.
Click to expand...
Click to collapse
XPERIA aokp_pico_milestone-6-build-7 try this with astest google apps ans wipe data and cache will work

[RUU] M8 Developer Edition SENSE 1.54.1540.10

Hello community, today I want to share something that was a little bit hard to spot. It's the Brightstar US bloatware-free Developer Edition RUU in case you want to convert your AT&T, GPE or any GSM device to Developer Edition.
If you are on Sense already just change your CID to 11111111, BS_US001 or BS_US002, your MID to 0P6B12000 if necessary and run the RUU from your pc.
If are on GPE you need to follow this thread: http://forum.xda-developers.com/showthread.php?t=2733523 but instead of installing a Custom Rom or a backup (final step) just run the RUU in fastboot mode.
Mega Link to 1.54.1540.10
I tested it on my unlocked BS_US001 that was converted to GPE(GOOGL001) and it worked just fine, my model id is 06PB12000.
Steps:
1. Change the CID to 11111111 and MID to 06PB12000.
2. Flash the RUU zip to convert the GPE to Sense ( http://forum.xda-developers.com/showthread.php?t=2733523 ) (Do this only if you come from GPE).
3. Perform a Factory Reset with the stock recovery (Do this only if you come from GPE).
4. Run the RUU from fastboot or Android itself if you are on Sense already and Voila! HTC One 8 Developer Edition with a super fast boot up!
5. Go back to bootloader and change the CID to BS_US002.
6. Restart the phone and install all the updates.
*NOTE: Phone does not need to be S-OFF or Bootloader Unlocked for the RUU to run correctly (But you need to be S-OFF to change CID / MID).
Profit!
Edit: Here's the newest RUU thanks to @Isotopes :
HTC's repo 3.28.1540.5
RUUs in Zip format, thanks to @wildestpixel
1.54.1540.10
https://drive.google.com/file/d/0B1b...ew?usp=sharing
2.22.1540.4
https://drive.google.com/file/d/0B1b...ew?usp=sharing
3.28.1540.5
https://drive.google.com/file/d/0B1b...ew?usp=sharing
Lollipop RUU exe from HTC's repo:
4.16.1540.8
http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe

is this legit anyone try it

jesushasadroid said:
is this legit anyone try it
Click to expand...
Click to collapse
i have not as yet but i downloaded it but just run it and it will tell u version before flashing

daorderdillon said:
i have not as yet but i downloaded it but just run it and it will tell u version before flashing
Click to expand...
Click to collapse
Will somebody verify that this works for Verizon? I'll test but I need to be assured that it won't brick my phone
---------- Post added at 08:02 PM ---------- Previous post was at 07:24 PM ----------
I haven't been able to get this RUU to work. The RUU opens up and goes through preparing setup but then just dissappears after agreeing to the terms and conditions
---------- Post added at 08:13 PM ---------- Previous post was at 08:02 PM ----------
daorderdillon said:
i have not as yet but i downloaded it but just run it and it will tell u version before flashing
Click to expand...
Click to collapse
What kernel are you using?

jake.99x3 said:
Will somebody verify that this works for Verizon? I'll test but I need to be assured that it won't brick my phone
---------- Post added at 08:02 PM ---------- Previous post was at 07:24 PM ----------
I haven't been able to get this RUU to work. The RUU opens up and goes through preparing setup but then just dissappears after agreeing to the terms and conditions
Click to expand...
Click to collapse
I tested it on the unlocked BS_US001 that I converted to GPE(GOOGL001) and it worked perfect, my model id is 06PB12000.
1. I changed the CID to 11111111
2. Flashed the RUU zip to convert the GPE to Sense (Following the thread I provided in OP)
3. Performed a Factory Reset with the stock recovery.
4. Installed TWRP and performed and Full Wipe.
5. Restored a Sense Backup.
6. Sense booted up fine but taking too long every time I restarted my phone (Not a very good restore huh!).
7. Relocked the bootloader
8. Ran the RUU and Voila! HTC One 8 Developer Edition with a super fast boot up!
9. Went back to bootloader and changed the CID to BS_US002.
10. Restarted the phone and installed all the updates, now I'm at version 2.22.1540.4
@kgbkny who has an AT&T version was able to convert it with no problems.
Two things come up to my mind 1. You may need to change the model ID of your phone or 2. You may need to run the RUU as administrator.
Good luck!

lsv-1 said:
I tested it on the unlocked BS_US001 that I converted to GPE(GOOGL001) and it worked perfect, my model id is 06PB12000.
1. I changed the CID to 11111111
2. Flashed the RUU zip to convert the GPE to Sense (Following the thread I provided in OP)
3. Performed a Factory Reset with the stock recovery.
4. Installed TWRP and performed and Full Wipe.
5. Restored a Sense Backup.
6. Sense booted up fine but taking too long every time I restarted my phone (Not a very good restore huh!).
7. Relocked the bootloader
8. Ran the RUU and Voila! HTC One 8 Developer Edition with a super fast boot up!
9. Went back to bootloader and changed the CID to BS_US002.
10. Restarted the phone and installed all the updates, now I'm at version 2.22.1540.4
@kgbkny who has an AT&T version was able to convert it with no problems.
Two things come up to my mind 1. You may need to change the model ID of your phone or 2. You may need to run the RUU as administrator.
Good luck!
Click to expand...
Click to collapse
How did you relock the bootloader?

In fastboot type this command. Fastboot oem lock

Sooo what exactly is better about this than my current Verizon M8 firmware? Sorry for the odd question but I've never really known what this is other than if you buy a phone with it it comes factory unlocked lol

S1L3nTShaDoWz said:
Sooo what exactly is better about this than my current Verizon M8 firmware? Sorry for the odd question but I've never really known what this is other than if you buy a phone with it it comes factory unlocked lol
Click to expand...
Click to collapse
The bootloader becomes permanently unlock. I'm trying to figure this out for verizon
---------- Post added at 08:53 PM ---------- Previous post was at 08:48 PM ----------
lsv-1 said:
I tested it on the unlocked BS_US001 that I converted to GPE(GOOGL001) and it worked perfect, my model id is 06PB12000.
1. I changed the CID to 11111111
2. Flashed the RUU zip to convert the GPE to Sense (Following the thread I provided in OP)
3. Performed a Factory Reset with the stock recovery.
4. Installed TWRP and performed and Full Wipe.
5. Restored a Sense Backup.
6. Sense booted up fine but taking too long every time I restarted my phone (Not a very good restore huh!).
7. Relocked the bootloader
8. Ran the RUU and Voila! HTC One 8 Developer Edition with a super fast boot up!
9. Went back to bootloader and changed the CID to BS_US002.
10. Restarted the phone and installed all the updates, now I'm at version 2.22.1540.4
@kgbkny who has an AT&T version was able to convert it with no problems.
Two things come up to my mind 1. You may need to change the model ID of your phone or 2. You may need to run the RUU as administrator.
Good luck!
Click to expand...
Click to collapse
I ran as admin, did you oem rebootRUU before running the RUU or was the phone booted and at the home screen

S1L3nTShaDoWz said:
Sooo what exactly is better about this than my current Verizon M8 firmware? Sorry for the odd question but I've never really known what this is other than if you buy a phone with it it comes factory unlocked lol
Click to expand...
Click to collapse
It only has HTC bloat, not HTC bloat + Verizon bloat. It also updates directly from HTC, not Verizon, so you get updates a bit faster. Also, if you are worried about Verizon sending an OTA that will lock you out of your phone, this should mostly alleviate those fears. It's why I switched from my AT&T branded build.

jake.99x3 said:
The bootloader becomes permanently unlock. I'm trying to figure this out for verizon
---------- Post added at 08:53 PM ---------- Previous post was at 08:48 PM ----------
I ran as admin, did you oem rebootRUU before running the RUU or was the phone booted and at the home screen
Click to expand...
Click to collapse
Nope, the RUU did it automatically. I was at the home screen.

lsv-1 said:
Nope, the RUU did it automatically. I was at the home screen.
Click to expand...
Click to collapse
Yeah this didn't work at all for me. After agreeing to the terms and conditions the RUU just closes out. Is anybody else having this problem?

jake.99x3 said:
Yeah this didn't work at all for me. After agreeing to the terms and conditions the RUU just closes out. Is anybody else having this problem?
Click to expand...
Click to collapse
Maybe the problem is driver related, look for adb drivers.
http://forum.xda-developers.com/showthread.php?t=2232799

lsv-1 said:
Maybe the problem is driver related, look for adb drivers.
http://forum.xda-developers.com/showthread.php?t=2232799
Click to expand...
Click to collapse
Yeah thats why I am puzzled I have had no problems with adb or fastboot I'm going to test on another computer.

jake.99x3 said:
Yeah thats why I am puzzled I have had no problems with adb or fastboot I'm going to test on another computer.
Click to expand...
Click to collapse
Good luck!

jake.99x3 said:
The bootloader becomes permanently unlock. I'm trying to figure this out for verizon
---------- Post added at 08:53 PM ---------- Previous post was at 08:48 PM ----------
I ran as admin, did you oem rebootRUU before running the RUU or was the phone booted and at the home screen
Click to expand...
Click to collapse
jshamlet said:
It only has HTC bloat, not HTC bloat + Verizon bloat. It also updates directly from HTC, not Verizon, so you get updates a bit faster. Also, if you are worried about Verizon sending an OTA that will lock you out of your phone, this should mostly alleviate those fears. It's why I switched from my AT&T branded build.
Click to expand...
Click to collapse
Will all future built ROM's run fine on Dev edition firmware? Also how much faster? Is it sort of like with the Google Play Edition on how you get updates directly from Google which is tons faster?
& is this really the only benefit? no Verizon stuff and 'perma' unlocked bootloader? Isn't that actually a flaw on the unlocked bootloader part? If you have to do oem lock in order to do certain things and this were to apparently "permanently" unlock it wouldn't that totally defeat the purpose or does it have some sort of *input word for sustainer here(way of not needing to be locked or something, cant think of the proper word lol)*? Also as far as I know there is no such thing as an OTA that can turn you S-ON (*pun intended*)? As long as you're S-OFF you should always be able to unlock your bootloader right? or is that only for the non Verizon/second carrierthatdoesthishere variants?
Edit: question 2! I remember when I flashed a GPE ROM I was able to use the ElementalX kernel which was incompatible with my Verizon variant, would that kernel work on a phone that has been converted to a developer edition or does this not even count as 'converting'?

S1L3nTShaDoWz said:
Will all future built ROM's run fine on Dev edition firmware? Also how much faster? Is it sort of like with the Google Play Edition on how you get updates directly from Google which is tons faster?
& is this really the only benefit? no Verizon stuff and 'perma' unlocked bootloader? Isn't that actually a flaw on the unlocked bootloader part? If you have to do oem lock in order to do certain things and this were to apparently "permanently" unlock it wouldn't that totally defeat the purpose or does it have some sort of *input word for sustainer here(way of not needing to be locked or something, cant think of the proper word lol)*? Also as far as I know there is no such thing as an OTA that can turn you S-ON (*pun intended*)? As long as you're S-OFF you should always be able to unlock your bootloader right? or is that only for the non Verizon/second carrierthatdoesthishere variants?
Edit: question 2! I remember when I flashed a GPE ROM I was able to use the ElementalX kernel which was incompatible with my Verizon variant, would that kernel work on a phone that has been converted to a developer edition or does this not even count as 'converting'?
Click to expand...
Click to collapse
Could you download the RUU and let me know if you are able to get past the terms and conditions

jake.99x3 said:
Could you download the RUU and let me know if you are able to get past the terms and conditions
Click to expand...
Click to collapse
Past it with no problems. I'm running Win 7 x64

Ok many thanks. I think I'm going to have to install win7. Currently I'm on win 8.1 and have been having problems, good thing I have the disk

jake.99x3 said:
Ok many thanks. I think I'm going to have to install win7. Currently I'm on win 8.1 and have been having problems, good thing I have the disk
Click to expand...
Click to collapse
Fill me in on the results with this, I'm interested in seeing how it turns out once it's flashed and tested!

[RECOVERY][CRICKET] Stock Recovery Image

I figured I would be a nice guy and post the stock recovery for the cricket 510s
I don't know if this will work with Sprint or VM so flash at your own risk
You can't fastboot boot this image you have to flash it
h**p://www.mediafire.c*m/download/srbkp41mxihbgcp/recovery.img
Here you go.
Had to obfuscate cause of the 10 post minimum before being able to post outside links

kalisto2002 said:
I figured I would be a nice guy and post the stock recovery for the cricket 510s
I don't know if this will work with Sprint or VM so flash at your own risk
You can't fastboot boot this image you have to flash it
h**p://www.mediafire.c*m/download/srbkp41mxihbgcp/recovery.img
Here you go.
Had to obfuscate cause of the 10 post minimum before being able to post outside links
Click to expand...
Click to collapse
I just flashed this recovery to my sprint version and tried to accept the OTA and I got a red triangle during the flash, so I'm guessing it isn't right. I have another 510 that is currently under the christmas tree. When it gets unwrapped I will pull the stock recovery off of it and post it up here.

gimpyestrada said:
I just flashed this recovery to my sprint version and tried to accept the OTA and I got a red triangle during the flash, so I'm guessing it isn't right. I have another 510 that is currently under the christmas tree. When it gets unwrapped I will pull the stock recovery off of it and post it up here.
Click to expand...
Click to collapse
The red triangle is the stock recovery press vol+up and power after like 15 seconds.
I thought there was something botched with it too but that is how the stock recovery looks

When I flashed the ota on the stock phone (under the tree) I didn't see any triangles, only flashing goodness. So I think something is wrong.

Thanks. Ive been looking for this. i didnt backup this partition before i flashed twrp

hat tip, thanks!

Hey do you have complete ruu software for htc desire 510 for cricket
I now have a custom rom on my need to bring it back to factory default image

ridimstar said:
Hey do you have complete ruu software for htc desire 510 for cricket
I now have a custom rom on my need to bring it back to factory default image
Click to expand...
Click to collapse
Here is a PC zip file with all Stock Firmware inside that i got from Cricket Update.
https://mega.co.nz/#!F0VzEIoY!ZYPsz0n5dDFCCeIRO4gcuW5K-p4Sc5s0CHB264EVyw8

aaron74 said:
Here is a PC zip file with all Stock Firmware inside that i got from Cricket Update.
https://mega.co.nz/#!F0VzEIoY!ZYPsz0n5dDFCCeIRO4gcuW5K-p4Sc5s0CHB264EVyw8
Click to expand...
Click to collapse
How do i flash it? I flashed TWRP using windroid....

Newyork! said:
How do i flash it? I flashed TWRP using windroid....
Click to expand...
Click to collapse
follow this steps:
Prequisites:
1) ADB and Fastboot executables http://www.mediafire.com/download/3vgybfyv7u7tf69/ADB.rar
2) Stock recovery signed image: http://www.mediafire.com/download/jnl3nw9hvk5ouv5/recovery_signed.img
Steps:
1) extract ADB.rar to c;\ADB
2) On c:\ADB hit shift + right click mouse and select "open windows command here"
3) turn on your phone, and from your PC command type: adb reboot bootloader (this will reboot your phone into bootloader)
4)at bootloader type this: fastboot flash recovery recovery_signed.img
and you should see this:
Code:
sending 'recovery' (12100 KB)...
OKAY [ 1.237s]
writing 'recovery'...
OKAY [ 0.865s]
finished. total time: 2.102s
5) if this doesnt work, just download the original rom for your carrier from HTC and execute the rom install from your PC: http://www.htc.com/us/support/rom-downloads.html
Your phone will be back to original with the recovery also... just remember to relock your phone before executing the Stock ROM exe (type this command to relock: fastboot oem lock)
Have a nice day

will this work for the cricket version of the htc desire 510

miguel644835 said:
will this work for the cricket version of the htc desire 510
Click to expand...
Click to collapse
No it's just for the cricket desire 510
Sent from my HTC Desire 510 using Tapatalk

is the recovery listed here part of the firmware set for 1.11.506.1? or is it from an earlier build?

scotty1223 said:
is the recovery listed here part of the firmware set for 1.11.506.1? or is it from an earlier build?
Click to expand...
Click to collapse
It should be unless there's a bunch of recovery firmwares for some reason? Is there a reason you need that info?

MrMike2182 said:
It should be unless there's a bunch of recovery firmwares for some reason? Is there a reason you need that info?
Click to expand...
Click to collapse
Stock recovery are not interchangeable. So if this is from something older, it doesn't have much value. I don't know what the likelihood is of future updates, but I like to be prepared.
If someone had an older ruu, I'd be pretty happy to have that, so ota files could be collected.
Sent from my HTC One using Tapatalk

scotty1223 said:
Stock recovery are not interchangeable. So if this is from something older, it doesn't have much value. I don't know what the likelihood is of future updates, but I like to be prepared.
If someone had an older ruu, I'd be pretty happy to have that, so ota files could be collected.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
You mean this RUU?
http://www.htc.com/us/

MrMike2182 said:
You mean this RUU?
http://www.htc.com/us/
Click to expand...
Click to collapse
No. I mean an older one. That is for the current build
Sent from my HTC One using Tapatalk

MrMike2182 said:
You mean this RUU?
http://www.htc.com/us/
Click to expand...
Click to collapse
Not really sure were to get the older one since I don't use Cricket but I'll check around.
---------- Post added at 04:25 PM ---------- Previous post was at 04:11 PM ----------
scotty1223 said:
No. I mean an older one. That is for the current build
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
See if this might have what you need.
http://forum.xda-developers.com/desire-510/help/twrp-backup-cricket-stock-rom-t2974447

MrMike2182 said:
Not really sure were to get the older one since I don't use Cricket but I'll check around.
---------- Post added at 04:25 PM ---------- Previous post was at 04:11 PM ----------
See if this might have what you need.
http://forum.xda-developers.com/desire-510/help/twrp-backup-cricket-stock-rom-t2974447
Click to expand...
Click to collapse
Thanks I'll check it out when I get a minute
Sent from my HTC One using Tapatalk

scotty1223 said:
Thanks I'll check it out when I get a minute
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
not exactky what i was looking for,but restoring it may let it download the OTA,even tho it wont install it. any idea what release firmware build number was? how many updates have there been to arrive at current?
downloading it now
here we have a european wwe ruu,but you gotta be a paid member at that site
http://www.ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/A11_UL/

GOOD NEWS ! Sprint m8 Got MM 6.20.651.3 update TODAY! Check for the Link

http://www.htc.com/us/support/htc-one-m8-sprint/news/
Direct Download Link - http://dl3.htc.com/application/RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3.exe

Updated . Firmware 6.20.651.3

is this for the H/K edition or the regular one?

The above link RUU doesn't work on Sprint M8 Harman Kardon edition. Follow this link for the RUU file: http://www.htc.com/us/support/htc-one-m8-harman-kardon-edition-sprint/news/

http://forum.xda-developers.com/showthread.php?p=64933496

please help i downloaded but the error cannot update ruu keep coming up. I tried downgrade to 4.25 and enter fastboot mode but not working

long.nguyen said:
please help i downloaded but the error cannot update ruu keep coming up. I tried downgrade to 4.25 and enter fastboot mode but not working
Click to expand...
Click to collapse
Did you lock your bootloader before doing so? Also, I believe this will delete your internal SD. Last time I did the update, it deleted everything on my phone, I've never experienced this but it did last time. Just a headsup to backup just in case.

@ink718 ... Do i also need to lock my bootloader first if i am uograding to this MM 6.20.651.3 ? Bcoz 4.25 was keep giving error saying battery is below 30% .. even when my battery was full.

info2shail2010 said:
@ink718 ... Do i also need to lock my bootloader first if i am uograding to this MM 6.20.651.3 ? Bcoz 4.25 was keep giving error saying battery is below 30% .. even when my battery was full.
Click to expand...
Click to collapse
You can't update to Marshmallow. You have to wait for the OTA.

Captain_Throwback said:
You can't update to Marshmallow. You have to wait for the OTA.
Click to expand...
Click to collapse
I m using SkyDragon MM rom right now... how can i get OTA in this Rom.. should i flash 4.24 Stock rom first? I hv downloaded .exe pc version.. do i still not able to update to Marshmallow?

I'm running original, never unlock, and that update from HTC won't load for me.

st0wz said:
Updated . Firmware 6.20.651.3
Click to expand...
Click to collapse
How did you do that? I got error every time I tried.

is radio version upadated in this RUU update?
---------- Post added at 04:40 AM ---------- Previous post was at 04:22 AM ----------
ctiger said:
How did you do that? I got error every time I tried.
Click to expand...
Click to collapse
getting error

Ok so please confirm is there no way to flash 6.0 official Rom? Like fastboot install relock boot loader etc

Thread closed,
There is an existing thread here: Good news, the sprint m8 is getting MM next week! already. Please use existing threads before creating new ones.

Htc one m7 no os

Hi i am trying to install a custom rom to my HTC one M7 BUT i have windows 10 and nothing i have done will get fast boot to work at all so i cannot get my oem token identifier and the phone currantly has NO OS i have tried to load ViperOne+9.0.0-fix rom with an OTG stick and all that it does now is boot straight into TWRP v2.6.3.3 been trying for 2 weeks now i have:
downloaded the 15 second adb
full sdk
turned off driver signing in windows
activated develpoper mode in windows
followed 30+ videos
read 100's of posts
is my phone buggered or is there a way to fix it?
*EDIT* phone originally came with android HD revolution but i prefer viper....
*NEW EDIT*
finally got a rom installed viper 6.2 currently flashing permanent root to prevent any future issues and hopefully have a easier time with custom roms in future...
A BIG thanks to monrokhoury for suggesting a different download

The phone came with a custom rom right? then why do you want to unlock the bootloader? You can't flash a custom rom unless you have s-off or an unlocked bootloader.
please post a pic of your bootloader screen.

monrokhoury said:
The phone came with a custom rom right? then why do you want to unlock the bootloader? You can't flash a custom rom unless you have s-off or an unlocked bootloader.
please post a pic of your bootloader screen.
Click to expand...
Click to collapse
the phone does have s-off (cant post a pic right now) i just dont know what else to do other than try and unlock the boot loader nothing is working to get a rom to run after install
Boot Loader screen
rumrunner
M7_UL PVT SHIP S-OFF RH
CID-HTC__001
HBOOT 1.54.555
RADIO-4A.21.3263.04
OpenDSP-V32.120.274.0909
OS-2.24.401.1
eMMC-boot 2048MB
*recent attempt*
placed viperone.zip on otg
moved rom from otg to internal memory
install rom making selections as i go through the aroma installer
tap install and wait
phone reboots right back into recovery every single time
consider hurling phone at wall...
restart process with complete format...

Maybe it's a problem with the particular rom you're attempting to flash. Or maybe the zip file is corrupt. Try flashing another rom like crdroid 6.0.1 or a sense 7 based rom. Both worked for me.
Wipe cache dalvik/art cache data and system before installing. You can flash the rom zip directly from the otg, it worked for me.
And make sure you're on the right twrp version. I'm on 3.0.0 and it works great.
good luck
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
Edit: twrp 2.6.x is outdated, flash 2.8.5+. 3.0.0+ is recommended.

monrokhoury said:
Maybe it's a problem with the particular rom you're attempting to flash. Or maybe the zip file is corrupt. Try flashing another rom like crdroid 6.0.1 or a sense 7 based rom. Both worked for me.
Wipe cache dalvik/art cache data and system before installing. You can flash the rom zip directly from the otg, it worked for me.
And make sure you're on the right twrp version. I'm on 3.0.0 and it works great.
good luck
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
Edit: twrp 2.6.x is outdated, flash 2.8.5+. 3.0.0+ is recommended.
Click to expand...
Click to collapse
currantly on twrp 2.6.3.3 will be updating to latest once i can install a rom since i cannot use fastboot(thanks! Windows 10) will try a different rom and see if it works
last HTC One M7 i had(chewed by a puppy)was easy to flash this one is a nightmare.

most of the newest custom ROMs require twrp 2.8.5+.. But you can try a different ROM first if you want.

monrokhoury said:
most of the newest custom ROMs require twrp 2.8.5+.. But you can try a different ROM first if you want.
Click to expand...
Click to collapse
He also need a 7.xx.xxx.xx firmware to run most new custom roms based on Sense. That + a recent version of twrp will make all roms working correctly.
Btw fastboot should work fine on window 8 and 10 as long as bootloader isn't 1.44 (1.54 is fine) so most likely a drivers/usb problem here.
Sent from my HTC One using XDA Labs

@alray I was on nusenseven sense 7 rom.. kept it for like a week without fishing any firmwares and it worked fine but then I noticed a massive big with the phone's microphone so I switched to 6.0.1.
BTW I myself have a question for you Sir . I made a cwm backup when I was on 4.4.3. If I flash it will the touchscreen work? then I wanna restore the preload data and the stock recovery and upgrade to the latest official lollipop with all the bug fixes and make a nandroid backup of that. will it work?
thanks man and sorry for going off topic.
---------- Post added at 10:29 AM ---------- Previous post was at 10:22 AM ----------
I'm on s-on

monrokhoury said:
@alray
BTW I myself have a question for you Sir .
Click to expand...
Click to collapse
No need to use "Sir" with me
I made a cwm backup when I was on 4.4.3. If I flash it will the touchscreen work?
Click to expand...
Click to collapse
Yes it should work fine, the touchscreen problem was happening on older version (when restoring a very old version on a phone running a newer firmware version). Does the software versino of your backup match your firmware version?
then I wanna restore the preload data and the stock recovery and upgrade to the latest official lollipop with all the bug fixes and make a nandroid backup of that. will it work?
Click to expand...
Click to collapse
If evertyhing in /system and /data/preload is stock and your software version match with your firmware version, your stock recovery version also match then it should work, not the fastest and easiest way to update but it should work. I would simply flash a RUU to update and then extract your important files from your CWM backup.

@alray I was just kidding dude. I haven't flashed any firmware since I got the phone (that's a looong time BTW), I'll post my getvar all screen shortly. Also, I plan on extracting the recovery img from the ota zip file and flashing it via fastboot. Should take care of the recovery issue don't you think?
Sadly, there ain't no recent ruu for my particular device. I'm on aosp based 6.0.1 dirty unicorns and I think it's considerably better than the stock lollipop ROM. however, I just wanna keep a twrp nandroid backup handy on an otg just in case things go south.
Thanks a lot man.