Related
If you dont know you can install the MIUI 7 on your phone by clicking on this link: http://en.miui.com/thread-149081-1-1.html
There is a full description on how to install MIUI 7 on your Redmi 2...
This method can successfully Root your Redmi 2 running MIUI7...
Steps are as follows:
1)Install TWRP recovery(I used TWRP myself so I dont know totally that any other recovery will work or not..you can yourself comment here if it does)
2)Download the attached file into the phone.
3)You can search the Miforum or xda to flash the proper version of the TWRP recovery for Redmi 2.
4)After successfully flashing TWRP go to Recovery using Vol up+power button and then selecting Recovery
5)Inside the recovery go to install and select the path where you have downloaded the attached file.
6)Install the zip(It will take about 1-2 minutes)...CONGRATS...Your device is successfully rooted...!!Enjoy Root access...
**If you are prompted to update the binary update it...Select TWRP/CWM method when prompted...
Sometimes it may happen that you dont get root access with this method...For this you have to factory reset your phone and again reinstall the MIUI7 rom via recovery flashable zip...You can search the MIUI forums for the same...
P.S:The TWRP can be used to install weekly OTA updates as well so no need to care for the Stock recovery even after you flash the TWRP recovery.Although after the OTA update your device will go back to stock Mi recovery but you can reflash twrp using Flashify app if you need it...(Available on the store)
***"I am NOT RESPONSIBLE if doing this Bricks your phone or causes any other type of harm...I am sharing something that I found while experimenting..!!"***
I used MIUI 7 ver.5.8.22 and ver 5.8.28 during this process..!!
If it works please credit me!!Thanks...!!
Good one.
Do you really think you need to write this this partial guide here?
I mean there is lot (on XDA) guide where you can find a complete guide.
Keep things easy.
Hi all ...
Today i show you how Root And TWRP Recovery for SM-J530F without any Problem
Part 1 : Root
ENABLE OEM UNLOCK and usb development
Note : all you data we will delete all Make sure take Backup !!
a) Download CF-Auto-Root from this link : https://download.chainfire.eu/1135/...y17lte-j5y17ltexx-smj530f.zip?retrieve_file=1
b) Flash with ODIN 3.10.7 in the AP slot.
c) Put your device in DOWNLOAD mode.
d) Load the CF-Auto-Root-j5y17lte-j5y17ltexx-smj530f.tar.md5 file below into the AP slot and hit start.
e) waiting finish, after finish you will see message ( you device is problem press Erase to fix ) press Erase and wait for Erase all data
F) after reboot,, again start in option " C "
g) Now after again Load the CF-Auto-Root file below into the AP slot and hit start. ,,, waiting finish and device is working again ,, you will see SuperUser
Congratulations !!
Now you can flash TWRP recovery form here :
https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
Jest only do this :
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
this is all ,, Sory for bad English
Hi, can anyone confirm that this instructions works
SM-J530F/DS
Confirmed working! Thanks @Abdullah_a86 :good:
Twrp install errors
So, i flashed the twrp with odin after enabling 2 things in developer options .
Good, i entered the TWRP menu from phone and formated data , after that when i was trying to install the Magisk Root it always show errors like:
E: TOUCH_DRAG (or HOLD or REPEAT or RELEASE): and 2 numbers here like 575,1000 (example)
Please help me.
The phone is working but i think twrp is broken idk please help.
Thanks
Thanks!
who can, adapt to SM-J530FM recovery ???
(FM - version)
Does it work on the dual sim model?
Does it work on J530F/DS? The dual sim model, thanx in advance
Not working -- UNSTABLE !!!
Yesterday I've followed this root guide to root my J530F (NOT Pro-edition, NOT dual sim) and it worked great but for short time. The first root app I've installed is "Root Checker" to confirm that root is installed correctly - and it was. Then I was installing "Lucky Patcher" app and there was no prompt for root access from SuperSU. I went back to "RootChecker" it was telling me that my root is not available.
Then I rebooted my phone and I got famous Samsung "Black screen of death" - J5 logo appears and then blank, nothing on the screen. I got in Download mode without a problem, re-flashed my firmware (AP) and works fine.
Now it feels stupid, while I triggered KNOX to 0x1 and I don't have a root. I haven't tried this TWRP recovery because I'm afraid that it won't work and that I'll have to format my phone again and start from the beggining.
It is very important that you guys share your experience, so the other knows if this is working or not.
Anyone tried this custom TWRP Recovery???
in my Experience the best way to root j530f is trwrp+ refined kernel
wetito said:
in my Experience the best way to root j530f is trwrp+ refined kernel
Click to expand...
Click to collapse
Can you confirm that TWRP recovery from the first post is working?
Thanks!
Yes it works
wetito said:
Yes it works
Click to expand...
Click to collapse
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
NeleRS said:
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Click to expand...
Click to collapse
Same problem in my case.
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
try root with magisk 14.0 and choose hide magisk
Abdullah_a86 said:
try root with magisk 14.0 and choose hide magisk
Click to expand...
Click to collapse
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Abdullah_a86 said:
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Click to expand...
Click to collapse
That web page is false. The same creator of the application has confirmed it in his thread
I think you should reference and post the links to the author's thread and not to a third-party page.
Sent from my Samsung Galaxy S8+ using XDA Labs
ASPViTo said:
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
Click to expand...
Click to collapse
Anyone can help?
First- I am NOT Responsible if you brick your Device! You do everything at your own Risk!
As I cannot find successfull thread here guiding to root this tablet I am posting the success with rooting with Magisk, all is seen on Russian forum 4pda,but the firmware I am on is not here ,it was little hard to find it(paid) but at the end it works, I have full root:
1 .You must have UNLOCKED BOOTLOADER!!! You can do it here are 2 threads guiding to it,mine was with DC_unlocker-4USD;
2. You must download Magisk from its original thread :Link
3.You must Look at which firmware you are,download the patched ones :С170B003
С170B253
C100B270
Or you can download you full Rom, extract it using Huawei Firmware Extractor extract the BOOT.img from UPDATE.APP file transfer it to your tablet and using Magisk--> install choose boot.img and patch it, then copy the patched_boot.img from folder "Downloads" in the internal memory back to PC,rename to boot.img.
4.You must have installed ADB and fastboot.
5.Using fastboot command on PC install the patched boot.img to tablet:
-First on your tablet enable Developer Options, thick Enable OEM Unlock,thick USB Debugging on,when connected to PC must ask for Fingerprint Security Rsa key,thick Always Trust to this PC"
-Second Tunoff Tablet, then hold volume Down button and connect to PC with USB Cable,Fastboot menu must appear: With green at bottom must be written that it is not FRP locked! If so -dont do proceed disable remove Huawei Account if you have one!
-Third-copy patched boot.img to folder where is located ADB and fastboot, then hold shift and right click mouse button and click Open Command Prompt here.
Now on fastboot menu enter following:
fastboot.exe flash boot boot.img
At the end everything must be OK!
Reboot with power button and check in Magisk !
Regards
I just wanted to confirm that this method works for my tablet. My Huawei Mediapad M3 10.1" BAH-L09 had bootloader unlocked. Emui5.1.2 and OS 7.0. Following these instructions, I extracted the BOOT.img from the stock ROM, then used Magisk Manager app (6.0.1) to create the patched-boot.img. Flashing this patched-boot.img using fastboot mode with command:
fastboot flash boot patched_boot.img
My tablet now is ROOTED without any problems (camera works normally). In short, just follow exactly these instructions and your tablet will be ROOTED
This works for me on BAH-L09 with Build Number BAH-L09C100B270. My Tab ist now rooted with Magisk 17.1 installed. Next i do flash special version of TWRP from the TWRP Builder site. I took the version for the BAH-W09 (WIFI version of the tab) on my own risk. I KNOW thats not the correct version, so please dont criticize.
Installation via fastboot worked. I can boot into Huawei recovery (Power+Vol-up) and TWRP (Power + Vol-Up and Vol-down same time). System boots without problem too. Also i can flash back the original huawei rcovery.img in fastboot mode.
But there is an issue in this TWRP recovery version 3.2.1-0. It does not decrypt data. I tried to format data and flash "no-verity-opt-encrypt". But there is still an Huawei secure mechanism, that wants me to format data in Huawei recovery again. Without format data my tab do not boot into system.
Next step i tried to get TWRP for my device on TWRP-builder app. but no succes because the build queue ist full. So i have to wait...
Sorry but how did you unlock the bootloader?
DragonautMk said:
Sorry but how did you unlock the bootloader?
Click to expand...
Click to collapse
I used dc-unlocker (you can google for). Its easy but it costs ca. 4 €.
Does this method still works on latest ota ?
The4anoni said:
Does this method still works on latest ota ?
Click to expand...
Click to collapse
My M3 10 lite was on latest frmware C100B270 as i used dc-unlocker. Unlock worked well for me.
Does rooting enable you to install Google Services on the tablet? Is so, how?
Is there an international ROM that can be used (with Google tools)
Thanks! Worked for my Mediapad M3 lite 10 (BAH-L09), but now... How can I update Magisk? The Magisk manager doesn't support the version installed.
Can't install twrp either
---------- Post added at 08:40 PM ---------- Previous post was at 07:51 PM ----------
ossizwei said:
This works for me on BAH-L09 with Build Number BAH-L09C100B270. My Tab ist now rooted with Magisk 17.1 installed. Next i do flash special version of TWRP from the TWRP Builder site. I took the version for the BAH-W09 (WIFI version of the tab) on my own risk. I KNOW thats not the correct version, so please dont criticize.
Installation via fastboot worked. I can boot into Huawei recovery (Power+Vol-up) and TWRP (Power + Vol-Up and Vol-down same time). System boots without problem too. Also i can flash back the original huawei rcovery.img in fastboot mode.
But there is an issue in this TWRP recovery version 3.2.1-0. It does not decrypt data. I tried to format data and flash "no-verity-opt-encrypt". But there is still an Huawei secure mechanism, that wants me to format data in Huawei recovery again. Without format data my tab do not boot into system.
Next step i tried to get TWRP for my device on TWRP-builder app. but no succes because the build queue ist full. So i have to wait...
Click to expand...
Click to collapse
The same for me. Have you got the appropiatte twrp recovery?
wanlus said:
Thanks! Worked for my Mediapad M3 lite 10 (BAH-L09), but now... How can I update Magisk? The Magisk manager doesn't support the version installed.
Can't install twrp either
The same for me. Have you got the appropiatte twrp recovery?
Click to expand...
Click to collapse
This is an old post. Development has going forward. Look here:
For a LineageOS rom
https://forum.xda-developers.com/mediapad-m3/development/rom-t3945684
For TWRP
https://forum.xda-developers.com/mediapad-m3/development/twrp-t3914531
For the first step use the 3.2.0 version of TWRP if you are in Huawei's stock Rom.
For me its the best for this moment. Only issue is, that camera dont work in this early lineage rom. But developer is working on it.
ossizwei said:
This is an old post. Development has going forward. Look here:
For a LineageOS rom
https://forum.xda-developers.com/mediapad-m3/development/rom-t3945684
For TWRP
https://forum.xda-developers.com/mediapad-m3/development/twrp-t3914531
For the first step use the 3.2.0 version of TWRP if you are in Huawei's stock Rom.
For me its the best for this moment. Only issue is, that camera dont work in this early lineage rom. But developer is working on it.
Click to expand...
Click to collapse
Ok, thank you so much. I've got installed Twrp properly, and it boots ok... but no more. Now it stays on the recovery home screen. I'll try again
NOTE:I shall not be responsible for any damage cause to your phone by this procedure.
As OREO on Huawei P8 Lite 2017 brings treble support so rooting it is an issue for everyone.
I am here to guide you how to root Huawei P8 Lite 2017 (also known as Honor 8 Lite).
Requirements:
1.Unlocked Bootloader
2.Oreo Updated
3.Current running firmware (mine PRA-LA1C185B366)
4.Huawei Update Extractor (Download Below)
5.Magisk Manager latest apk.
6.Internet Connection.
7.Fastboot installed.
Procedure:
1.Extract RAMDISK.img from your downloaded firmware (or you can dump it using TWRP).
2.Transfer extracted RAMDISK.img to your phone.
3.Now open installed Magisk Manager and click install.
4.Now choose patch boot image and select the extracted RAMDISK.img.
5.It will take 5 min to download zip file and patch RAMDISK.img.
6.Patched RAMDISK.img usually stored in "sdcard/Download/patched-boot.img" or magisk manager will also guide you where the patched boot image stored.
7.Transfer the patched-boot.img to your pc.
8.Now boot your phone in bootloader mode.
9.Flash the patched-boot.img using this command
"fastboot flash ramdisk (path of patched-boot).img" without qoutes.
10.After successful flashing reboot your phone either by holding power button or by using fastboot command.
BOOM your phone is rooted now start playing with magisk modules.
Not to rain on your parade but I have a Honor 6X. And I managed to install Magisk normally. Just flash TWRP, latest Magisk and reboot. Any TWRP available for hi6250 with decryption support?
Mannan Qamar said:
Not to rain on your parade but I have a Honor 6X. And I managed to install Magisk normally. Just flash TWRP, latest Magisk and reboot. Any TWRP available for hi6250 with decryption support?
Click to expand...
Click to collapse
No not yet.
mahrtayyab said:
No not yet.
Click to expand...
Click to collapse
Why is it taking so long? Isn't anybody working on it?
Mannan Qamar said:
Why is it taking so long? Isn't anybody working on it?
Click to expand...
Click to collapse
Huawei has changed the partition scheme along with encryption method totally thats why it is taking so much time.
Good News is devs are working on it and they are hoping that we could decrypt our huawei phone very soon.
I used a different variant of twrp and flashed Magisk. twrp doesnt support OTG but the backups and restore works fine
Megan1976 said:
I used a different variant of twrp and flashed Magisk. twrp doesnt support OTG but the backups and restore works fine
Click to expand...
Click to collapse
which one? Please send xda link
https://drive.google.com/file/d/1-uYbVhzcczReoXblG2QdFGvPfJWe6Oqk/view?usp=drivesdk
On my p8 lite 2017 and p10 lite root is installed by flashing Official Magisk zip via TWRP without any extras, maybe this could work on Emui 9...
DarkJoker360 said:
On my p8 lite 2017 and p10 lite root is installed by flashing Official Magisk zip via TWRP without any extras, maybe this could work on Emui 9...
Click to expand...
Click to collapse
Brow plz help me, i have a Pra-lx2 Oreo, and i want to use your Custom Rom LOS17, can i install twrp and your Rom with Bootloader Locked?? If no, plz help me do unlock Bootloader on pra-lx2 Oreo. plz brow
Perform this at your own risk. You might LOSE all data on your phone.
( I'm not responsible for any damage to your device )
//
Update: OrangeFox Recovery Project for Xiaomi 11T Pro (vili) with the same installation instructions.
Caution: this recovery is intended for use with MIUI vendors ONLY, even having the flashing capability of MiLahaina based system, do not try to boot it on MiLahaina ROMs, as the builds aren't compatible.
Bugs as for now:
- Vibrator
- MTP (adb works fine)
https://sourceforge.net/projects/chemuski1-stuff/files/Xiaomi 11T Pro/Recovery (MIUI vendor)/OrangeFox-Unofficial-vili.img/download
//
This guide will walk you through the process of installing TWRP on your Xiaomi 11T Pro.
READ THIS FIRST:
You may brick your device if you don't know what you are doing.
This might ERASE ALL YOUR DATA so do a BACKUP encase.
Your bootloader will be unlocked.
Prerequisites:
The bootloader must be unlocked. Click here for a tutorial.
Install ADB and Fastboot Drivers from here (Select the latest) --> https://androidmtk.com/download-minimal-adb-and-fastboot-tool )
Install drivers for Xiaomi 11T Pro --> https://droidfilehost.com/download/download-xiaomi-usb-driver-for-windows (For Windows Only!)
Download the TWRP Image for Xiaomi 11T Pro --> https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/vili/
Installing TWRP:
Reboot the phone to fastboot (Power + Vol Down)
Connect the phone to the computer using an USB cable (Preferred to use original cable that came with the phone)
Extract the fastboot files and open CMD/Terminal there.
Paste the twrp.img in the same folder.
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
Done!
Note: Change twrp.img with the original file name example twrp-3.7-xxx.img.
Orignal Thread: https://forum.xda-developers.com/t/how-to-install-twrp-on-xiaomi-11t-pro.4350425/
Edit: The Recovery is now updated by skkk and is working on Android 12 without any problems just download it from the update link above
Good job!!
Thank youuu!
Edit: But everytime I open TWRP I need to put my pattern, why is that?
oh thanks, so i can flash EU rom through TWRP ???
Where is this twrp from, who made it. Information needed. Please share.
GeeyahnOfficial said:
Thank youuu!
Edit: But everytime I open TWRP I need to put my pattern, why is that?
Click to expand...
Click to collapse
Not 100% sure but it's probably because your device is encrypted which is the default behavior of miui when you setup your lockscreen method.
skcapk said:
oh thanks, so i can flash EU rom through TWRP ???
Click to expand...
Click to collapse
Not yet, we still don't have recovery rom yet, the current eu rom is for fastboot.
sushuguru said:
Not 100% sure but it's probably because your device is encrypted which is the default behavior of miui when you setup your lockscreen method.
Click to expand...
Click to collapse
How can I remove it? When I put my password it decrypt tho, should I keep it like that (keep putting password whenever I open twrp) or remove it? Which is better?
GeeyahnOfficial said:
How can I remove it? When I put my password it decrypt tho, should I keep it like that (keep putting password whenever I open twrp) or remove it? Which is better?
Click to expand...
Click to collapse
It is better to enter the password every time as this will enhance your security in case you lose your phone they won't find the password is decrypted therefore they can't access your data.
But still there is another way they might access your data and that if your bootloader is unlocked usually the best way to protect yourself is to leave the password in twrp and lock your bootloader.
Flashed Twrp Running smooth on Slot A Installing Magisk is making issue
Suggest how to fix this
djkrish5610 said:
Flashed Twrp Running smooth on Slot A Installing Magisk is making issue
Suggest how to fix this
Click to expand...
Click to collapse
What issues? Could you be more specific? I have both and I don't have any issues...
i have Tried as below:
Option1: Tried to boot Twrp after that go to Advanced > Flash Current TWRP > Done Magisk was missing so flashed Magisk from Twrp.
Not booting on system
Option2: Flashed TWRP on SLOT A & SLOT B and now messed up
This unofficial version of TWRP + Magisk root seems to cause network problems for me as the mobile connection dropped from 4G(LTE) to 2G(EDGE).
Using Magisk root without TWRP works like a charm.
Anyone else facing this issue?
I flashed the latest magisk on this TWRP and no problem facing.
TheRomFan said:
Perform this at your own risk. You might LOSE all data on your phone.
( I'm not responsible for any damage to your device )
This guide will walk you through the process of installing TWRP on your Xiaomi 11T Pro.
READ THIS FIRST:
You may brick your device if you don't know what you are doing.
This might ERASE ALL YOUR DATA so do a BACKUP encase.
Your bootloader will be unlocked.
Prerequisites:
The bootloader must be unlocked. Click here for a tutorial.
Install ADB and Fastboot Drivers from here (Select the latest) --> https://androidmtk.com/download-minimal-adb-and-fastboot-tool )
Install drivers for Xiaomi 11T Pro --> https://droidfilehost.com/download/download-xiaomi-usb-driver-for-windows (For Windows Only!)
Download the TWRP Image for Xiaomi 11T Pro --> https://sourceforge.net/projects/xi....6.0_11-0_LOCAL-20220203-01-vili.img/download.
Installing TWRP:
Reboot the phone to fastboot (Power + Vol Down)
Connect the phone to the computer using an USB cable (Preferred to use original cable that came with the phone)
Extract the fastboot files and open CMD/Terminal there.
Paste the twrp.img in the same folder.
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
Done!
Note: If you were using magisk, reflash it now
Orignal Thread: https://forum.xda-developers.com/t/how-to-install-twrp-on-xiaomi-11t-pro.4350425/
Click to expand...
Click to collapse
Greetings.
Amazing, however, I want to know whether this works for the Xiaomi 11T or not.
Jin_Vickaizer said:
Greetings.
Amazing, however, I want to know whether this works for the Xiaomi 11T or not.
Click to expand...
Click to collapse
It won't as it might brick your phone so make sure you install this in 11T Pro (vili) not 11T (agate)
Good morning, I use it with the 11t Pro, and no problem! great everything.
But now they updated to Android 12 and Miui 13, and it doesn't work anymore...
The developer will update the recovery to work on android 12??
First of all, thank you very much for the hard work you do.
Deleted
Hello,
So i flashed TWRP and it all worked fine but now I can't install any stock rom anymore. I always get the "Antirollback check error".
zLauch666 said:
Hello,
So i flashed TWRP and it all worked fine but now I can't install any stock rom anymore. I always get the "Antirollback check error".
Click to expand...
Click to collapse
Currently on which version of rom?
And you want to install?
NOSS8 said:
Currently on which version of rom?
And you want to install?
Click to expand...
Click to collapse
i got help from the discord server and here's what i did:
> launched TWRP > Advanced > ADB Sideload
> installed the newest platform-tools on my PC
> then flashed a recovery rom with version 12.5.10
>> NOTE: if it crashed at 47% - 49% that's fine, it's an ADB bug so 47 - 49 means 100%
> rebooted to system
after all that my devices was working again.