Stock Kernel file on a zip for OOS 4.0.1 - OnePlus 3T Questions & Answers

Hi guys,
I made a mistake and I installed a MM kernel on the OOS 4.0.1 .
Do you know if there is a zip file with stock kernel so I can install it using TWRP.
Thank you

vlc_marcos said:
Hi guys,
I made a mistake and I installed a MM kernel on the OOS 4.0.1 .
Do you know if there is a zip file with stock kernel so I can install it using TWRP.
Thank you
Click to expand...
Click to collapse
If you have twrp then flash the full ota zip over again. This install the boot image again.

If you have a backup you can restore only the boot partition to fix it.

Related

TWRP Backup of B.133-Rom

TWRP Backup of B.133-Rom (General version-not updated version).
Details - http://consumer.huawei.com/hu/support/downloads/detail/index.htm?id=27321
Rooted.
Immutable-list removed.
Kinguser replaced with SuperSU 2.0.2.
Busybox installed.
Download:
https://drive.google.com/uc?id=0B4An0SoaFHCmVzBha1gxVWlvalU&export=download
Only a question: this zip contains whole rom as decribed, but I 've got a B127 version, so is it enough recovery your backup-rom from TWRP recovery??
Thanks in advance
fabrizioguess said:
Only a question: this zip contains whole rom as decribed, but I 've got a B127 version, so is it enough recovery your backup-rom from TWRP recovery??
Thanks in advance
Click to expand...
Click to collapse
Yes,download rar.file,unpack and copy twrp folder on sd card,reboot in to twrp and recover backup.
Sent from my HUAWEI P7-L07 using Tapatalk
It works great
Please help me
I solved thanks anyway
Rollback B133
Hi
can anybody upload Rollback133 rom? I'm on B609 now and wanna back to B133. I couldn't find any rollback133.

lollipop update

i was updating my s advance with CyanogenMod 12.1 [26/11/15].........currently i have 4.1 jellybean indian version ddlup8 with root access ........... whenever i went for recovery i install cwm 6.8 it installs for little time only. please tell where i am wrong i want to install 5.1 lollipop on my device, i follow these steps but installation always gets cancel .......
1. i ve rooted my devive
2. i installed recovery cwm
3. i back up my data
4. wipe data
5. wipe cache
6. wipe dalchvik cache
7 then i install cyanogenMOd 11 ( buit it doesnt install)
so i tried directly installing cyanogenMOd 12 with cwm but does work
so please tell me what is the problem and what step should i follow.
I want to install CyanogenMod 12.1 [26/11/15] but error comes like:
apply parsed perms : isetfilecon of /system/lost+
not supported on transport endpoint
set metedata recursive:
E:Error in /sdcard/cm12.1_
(status 7)
installation aborted
Try using TWRP instead of CWM
Patil.sid101 said:
i was updating my s advance with CyanogenMod 12.1 [26/11/15].........currently i have 4.1 jellybean indian version ddlup8 with root access ........... whenever i went for recovery i install cwm 6.8 it installs for little time only. please tell where i am wrong i want to install 5.1 lollipop on my device, i follow these steps but installation always gets cancel .......
1. i ve rooted my devive
2. i installed recovery cwm
3. i back up my data
4. wipe data
5. wipe cache
6. wipe dalchvik cache
7 then i install cyanogenMOd 11 ( buit it doesnt install)
so i tried directly installing cyanogenMOd 12 with cwm but does work
so please tell me what is the problem and what step should i follow.
I want to install CyanogenMod 12.1 [26/11/15] but error comes like:
apply parsed perms : isetfilecon of /system/lost+
not supported on transport endpoint
set metedata recursive:
E:Error in /sdcard/cm12.1_
(status 7)
installation aborted
Click to expand...
Click to collapse
Extract boot.img from cm12.1 zip file
Flash boot.IMG
Reboot recovery
Flash cm12.1 zip file followed by GAPPS
Voilà.. All done
Or you can install this modded CyanogenMod 12.1 with integrated gapps, works on old cwm too: https://www.dropbox.com/s/v41kau37sxyct7i/CM12.1.zip?dl=1
Patlcs said:
Extract boot.img from cm12.1 zip file
Flash boot.IMG
Reboot recovery
Flash cm12.1 zip file followed by GAPPS
Voilà.. All done
Click to expand...
Click to collapse
how to flash boot.img please explain in detail.
currently i have flashed 4.12 stock rom and root.zip
but twrp recovery is not installing and cwm recovery is not working
please help me to update
Patil.sid101 said:
how to flash boot.img please explain in detail.
currently i have flashed 4.12 stock rom and root.zip
but twrp recovery is not installing and cwm recovery is not working
please help me to update
Click to expand...
Click to collapse
you can try to use the temporary CWM recovery to flash the boot.img file.
as i said earlier, extract the boot.img file from the rom file and then flash it via the recovery.
I am faceing the same problem
Patlcs said:
you can try to use the temporary CWM recovery to flash the boot.img file.
as i said earlier, extract the boot.img file from the rom file and then flash it via the recovery.
Click to expand...
Click to collapse
Hi
I am faceing the same problem. Can u Explain in Details how to use CWM recovery to flash the boot.img file ?
souravsadvanced said:
Hi
I am faceing the same problem. Can u Explain in Details how to use CWM recovery to flash the boot.img file ?
Click to expand...
Click to collapse
Wow i didnt think that i would reply to something i said 2 years ago xD
Hmm i am a bit rusty now as i upgraded to the s7 and now note 8 where i have not rooted or installed custom roms for a while so try it at your own risk.
If i recall correctly, you need to extract the boot.img file from cm12.1 using 7zip or winrar on your pc
Then there should be another thread for a temporary cwm recovery. Download the file and flash it when u are in recovery mode.
After flashing that temp cwm file, it should boot into it automatically and then flash cm11 followed by gapps

Update to marshmallow roms

A year back I installed XZDualRecovery with a Lollipop ROM from xda. Now I want to update to resurrection remix for marshmallow. I wanted to know what is the path to follow?
Flash twrp 3.0+ (can I directly flash it on my current phone using twrp 2.8 on XZDualRecovery?).
and then the kernel?
THeLogiC said:
A year back I installed XZDualRecovery with a Lollipop ROM from xda. Now I want to update to resurrection remix for marshmallow. I wanted to know what is the path to follow?
Flash twrp 3.0+ (can I directly flash it on my current phone using twrp 2.8 on XZDualRecovery?).
and then the kernel?
Click to expand...
Click to collapse
You can flash RR rom using twrp 2.8 and if you want to update twrp then flash the twrp 3.0.2 zip after flashing the rom.You don't need to flash any other custom kernel on RR.It's stable.
Røbin said:
You can flash RR rom using twrp 2.8 and if you want to update twrp then flash the twrp 3.0.2 zip after flashing the rom.You don't need to flash any other custom kernel on RR.It's stable.
Click to expand...
Click to collapse
Thank you for your response. The rom is working perfectly.

{GUIDE} Jumping between 3.5.2/3.2.6 and New Released CM based Roms (Eg: RR 5.7.4)

Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/…/0ByD3oqJ_...0;/view…
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/…/0ByD3oqJ_...0;/view…
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Thanks but 3. 2.6 files do not found
No link works!
Just go find another link if these here don't work ...
There is a thread with all official firmwares. Or just use Google.
Sent from my OnePlus 3 using Tapatalk
3.2.4 https://drive.google.com/file/d/0ByD3oqJ_uj0VWjVMbmZoZS1kejg/view
3.2.6 https://drive.google.com/file/d/0ByD3oqJ_uj0VZUFjblBSbEVNRGs/view?usp=sharing
XDA app screwed the links
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
This is strange..
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
Could it be that your bootloader is now locked again after using the unbrick tool?
DavidXanatos said:
Could it be that your bootloader is now locked again after using the unbrick tool?
Click to expand...
Click to collapse
No it's unlocked i checked
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
geekynoob said:
This is strange..
Click to expand...
Click to collapse
I know...
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
EdHicks said:
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
Click to expand...
Click to collapse
It's easy mate..
Flash rr and then flash the 3.2.4 fw.. As u have a good twrp now.. Simple..
geekynoob said:
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Click to expand...
Click to collapse
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
z31416 said:
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
Click to expand...
Click to collapse
Nice u will get a black screen..
geekynoob said:
Nice u will get a black screen..
Click to expand...
Click to collapse
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
Modded twrp can be used to flash 3.2.6 or 3.5.2 oos.. Now if u want to go back.. Using the modded twrp flash the 3.2.4 files.. Just reboot recovery now flash non modded twrp as u have 3.2.4 files official twrp will work.. And then flash any rom u want..
green. said:
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
Click to expand...
Click to collapse
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
geekynoob said:
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
Click to expand...
Click to collapse
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
This will do it. It's how I got going. I went from stock rooted 3.2.6 OOS to RR 5.7.4.
Thanks for putting to words for others.
green. said:
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
Click to expand...
Click to collapse
I've done a bit of Dev.. But i am not sure about ur statement.. .. And cm based roms don't have fw files.. Feel like a noob lol..

Unable to update to MIUI 9

Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
steve.24 said:
Hello guys.
I've just tried to update to MIUI 9.0.1.0 NDDMIEI from MIUI 8.5.9.0 NDDMIED on device Xiaomi Mi Max 2 but it failed.
I have an unlocked bootloader and SuperSu installed, but the recovery is Mi Stock Recovery. :cyclops:
I had directly booted TWRP Recovery without flashing using
Code:
fastboot boot twrp.img
to flash SuperSu on device. :good:
Need support with this issue. I don't want to flash whole ROM every time I recieve an update.
Click to expand...
Click to collapse
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
reversegear said:
i successfully flashed to miui v9(V9.0.1.0.NDDMIEI) over miui v8(V8.5.8.0.NDDMIED) without data wipe. all my data were intact
Keep a backup just in case
make sure you downloaded recovery flashable full rom package ~1.38GB (not the 500mb OTA update )
donot wipe data/cache/dalvik
flash via TWRP recovery
just flashing rom wont boot due to dm-verity. (result will be bootloop)
u need to flash super user or magisk (or lazy flasher "ive not tried though" ) which patches boot.img which makes rom bootable
Click to expand...
Click to collapse
I'll give it a try. Currently I have data wiped and installed full ROM through fastboot method. So next time, for sure I'll give it a shot.
But I have a doubt, where TWRP be able to flash an MIUI ROM. I mean the bootloader unlocked, encrypted system partition and all.
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
scholastova said:
Since you have your device rooted, first install flashify, and backup your stock recovery. Then you can flash twrp recovery and install Miui 9, and root the device again. Last, install flashify again and restore your stock recovery.
Click to expand...
Click to collapse
Can you give stock recovery from mi max 2? I forgot to back up his original recovery stock and was hit with twrp.

Categories

Resources