Database Develop

Please I need help with my NOTE :(

I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.

tbagtbee said:
I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.
Click to expand...
Click to collapse
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?

put the phone in DOWNLOAD MODE. read dr. ketan's thread.

You have to reboot your phone in Download Mode by Pressing Vol Down+Home Key+Power Button simultaneously.
A warning message will be displayed. Just Press Vol Up Button to Continue. Now connect it to pc and open ODIN. You will see a small box in upper left corner turns into yellow. It means yours phone is recognised by ODIN. Now start Flashing
Hope it Helps.

jonpaslim said:
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?
Click to expand...
Click to collapse
Yes, I changed to USB debugging and i already now have 6 usb cables :crying: and it still does not work..i have tried download mode too and it ODIN didnt show the yello mark (so that means ODIN didnt see it too)

When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?

sahilarora2003 said:
When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?
Click to expand...
Click to collapse
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system

tbagtbee said:
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system
Click to expand...
Click to collapse
Then I am sure its a problem releated to drivers.
Download them from here. Remember to Remove previous drivers installed on your PC

Phone won't connect to HTC Sync or adb

Got my phone about a week ago & got pretty bored of it so I wanted to root it and get a different ROM going. For some reason, I can't get the phone to connect to HTC Sync Manager though I updated the drivers. Any time the phone is switched into USB debugging, My HTC drivers fail to install. I have no idea how to solve this problem. Also when trying to get the Token ID using the command prompt, the device doesn't show up after using the command adb devices either. Need help please.

In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC

bigdaddy619 said:
In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC
Click to expand...
Click to collapse
If the phone doesn't have USB debugging enabled, it doesn't appear in the device manager besides under portable devices. Once USB debugging is turned on, Android devices tab appears at the top but the drop down reads My HTC with the yellow triangle with ! on the inside indicating there's some sort of issue. I tried updating the drivers, uninstalling the drivers, restarting the phone and computer, then reinstalling the drivers but nothing has worked thus far. HTC Sync still isn't detecting the phone at all and I can't get the Token ID to continue the rooting process until the device is able to be detected.

HurtMeSole said:
If the phone doesn't have USB debugging enabled, it doesn't appear in the device manager besides under portable devices. Once USB debugging is turned on, Android devices tab appears at the top but the drop down reads My HTC with the yellow triangle with ! on the inside indicating there's some sort of issue. I tried updating the drivers, uninstalling the drivers, restarting the phone and computer, then reinstalling the drivers but nothing has worked thus far. HTC Sync still isn't detecting the phone at all and I can't get the Token ID to continue the rooting process until the device is able to be detected.
Click to expand...
Click to collapse
Windows 8.1?

bigdaddy619 said:
Windows 8.1?
Click to expand...
Click to collapse
No, Windows 7, 64-bit.

HurtMeSole said:
No, Windows 7, 64-bit.
Click to expand...
Click to collapse
Check PM

i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again

trinity343 said:
i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again
Click to expand...
Click to collapse
I'm still having the same issue. I gave up for the time being but hopefully someone else had the same issue & can help us out.

HurtMeSole said:
I'm still having the same issue. I gave up for the time being but hopefully someone else had the same issue & can help us out.
Click to expand...
Click to collapse
Same problem here with an HTC One Mini. Its driving me mad!:silly:

trinity343 said:
i'm having this same issue. i just had to reload my phone back to stock bc it crashed. i'm trying to get it to be set to s-off but i can't get rumrunner to see my phone with adb connection. also on the device manager it shows the android phone under other devices with a ! on it.
i'm also using win7Pro x64 not sure what else to do on it at this point to get it working correctly
HTC Sync also doesn't see it. i got it see it for a few minutes last night but the it stopped again
Click to expand...
Click to collapse
Strangely enough, I literally just tried it on a different computer and everything worked exactly as it was supposed to. I had 3 computers in my home, none of which worked but got to work and the laptop they gave me worked just fine. Then I got on my gf's Mac and it went mostly smooth (even though it was difficult not being as familiar with the OS). My advice is do everything you're doing on a different computer until you see it without the ! in the device manager.

Boblud said:
Same problem here with an HTC One Mini. Its driving me mad!:silly:
Click to expand...
Click to collapse
Should try using a different computer. Worked for me after trying several computers.

BD619 said:
In bootloader you should type fastboot devices not adb devices.
You can try this to get the drivers installed correctly
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Also try these drivers http://d-h.st/FXC
Click to expand...
Click to collapse
My experience may be helpful. I had no ADB driver, but Composite USB seemed to work. However, the driver install crashed. I needed to open my phone and answer the dialogs on my phone while the driver was installing. After that, everything is hunky-dorry (I know, showing my age).

I was having the same problem until I UNCHECKED the USB debugging mode and reconnected the phone to the computer. Drivers reinstalled and HTC Sync Manager (not HTC Sync--different program) recognized the phone. I had to answer dialogue on phone and then the USB debugging mode status changed itself to enabled. It's all working now, after hours of fiddling.

Cant connect usb

using ....XT1068
Hey guys im a newbie but pls help me
I am unable to connect any usb device and also not able to connect to pc
When i connect my device to my pc it does not detects my phone (tried on different pcs as well) and also the usb otg devices are also not working
I tried downgrading to kitkat but still no help....and even contacted customer support but they didnt helped
( my mobile is getting detected in AP fastboot mode without any problem....i flashed kitkat using it..) PLs help

Do you have Motorola Device Manager Installed?
If not then Download Here: Click Here

Yes it is installed properly

Ok.
First check this : First open Settings then navigate to Storage and touch the upper-right corner for the USB computer connection options. Make sure Media device (MTP) is selected.
If this doesn't work then well you need to update the driver for your phone which your computer is using. Go to device mangaer on your pc and click on your phone name and update all drivers(left click to see options).

Still not working

It worked for half hour and then gone again

Hard brick help 911

I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.

Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps

herculesPh said:
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
Click to expand...
Click to collapse
Thank you for your reply but it seems you didn't read my post. My phone is not recognized by any pc.

What is the terminal command to restore a backup? That's pretty much my last ditch effort.

Well I broke my recovery so I'm screwed. I contacted Samsung and they said they would service it for free. Wish me luck.

What would cause the phone to stop being recognized by the PC? I narrowed it down to the MTP software or the micro usb charge port. My Windows computer says Device Descriptor Request Failed. Linux box does nothing. No USB devices are listed when I run lsblk.

weinerwad3000 said:
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Click to expand...
Click to collapse
you can try this code and test if it work
*#0808#

Familiaaa said:
you can try this code and test if it work
*#0808#
Click to expand...
Click to collapse
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.

weinerwad3000 said:
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
Click to expand...
Click to collapse
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)

jubei79 said:
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.

weinerwad3000 said:
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
Click to expand...
Click to collapse
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html

jubei79 said:
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
Click to expand...
Click to collapse
I've tried 4 different cables. My wife's S5 works perfectly fine on all computers. I have tried in Windows 7, 8, 8.1, and 10. I've also tried in Linux Mint. It used to work until I installed MOAR Rom. Windows says Device Descriptor Request Failed. Linux doesn't do anything when hooked up. lsblk doesn't show the device either.

I have a bit of an update. Apparently something happened with all my data cables. I hooked up my wife's phone the other day and I was all of a sudden receiving the same error as the note 5. I went out and bought a new data cable and now her phone connects again. I'm waiting for the Note 5 to charge up so I can try Odin. I'll post back my results.
I apologize to those who told me it was the cable. I just didn't see that it was conceivable that all 4 of my data cables were all of a sudden damaged. Never underestimate the ability of children to destroy every working cable you own.

Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.

weinerwad3000 said:
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
Click to expand...
Click to collapse
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.

musab_bari said:
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
Click to expand...
Click to collapse
I ended up trying to replace the port and accidentally cut the ribbon for the LCD screen. Ended up getting a new phone.

Xiaomi redmi note 9 pro, PC don't see device in bootloader

Hello, i got a problem. When i'm turning my xiaomi into fastboot mode my pc doesnt see it. In "normal" mode i can see it, get files from it etc. When i connected my dad xiaomi(same model as mine) it works so its not problem with pc but with my phone probably. What can i do?

Hello ,
your problem is very simple to resolve, its because you didn't install the right drivers, either manually search for in, or use my solution , :
1-Download driver booster from the official website (free version)
2-plug in your smartphone.
3-performe an automatic driver search , from the result select ONLY the driver related to your device , then let it download and install
4-do whatever you was going to do.
5-if it still doesn't recognize it do the same thing with fastboot On, you're good to go.
PS : that worked for me with fastboot On then scan and install.

TheAwesomeRB1 said:
Hello ,
your problem is very simple to resolve, its because you didn't install the right drivers, either manually search for in, or use my solution , :
1-Download driver booster from the official website (free version)
2-plug in your smartphone.
3-performe an automatic driver search , from the result select ONLY the driver related to your device , then let it download and install
4-do whatever you was going to do.
5-if it still doesn't recognize it do the same thing with fastboot On, you're good to go.
PS : that worked for me with fastboot On then scan and install.
Click to expand...
Click to collapse
It says that the drivers are good. I can't do this in fastboot because my pc don't see my phone in fastboot mode, there are not anything in device manager too

Still Try to do it in fasboot, it will work , it worked for me.
Go to tools in driver booster , then clean the devices , turn in fast boot mode , then search for drivers
if it doesnt work you'll have to download manually compatible MTK drivers.

TheAwesomeRB1 said:
Still Try to do it in fasboot, it will work , it worked for me.
Go to tools in driver booster , then clean the devices , turn in fast boot mode , then search for drivers
if it doesnt work you'll have to download manually compatible MTK drivers.
Click to expand...
Click to collapse
I installed drivers manually(because program don't work too) from here https://driverschalk.com/download-mediatek-mtk-usd-drivers/ but still don't work:/

AlienBo1s said:
I installed drivers manually(because program don't work too) from here https://driverschalk.com/download-mediatek-mtk-usd-drivers/ but still don't work:/
Click to expand...
Click to collapse
Hi, did you solve it? I have the same issue

kusosuha6vt said:
Hi, did you solve it? I have the same issue
Click to expand...
Click to collapse
Not yet:/

AlienBo1s said:
Not yet:/
Click to expand...
Click to collapse
I believe i had a similar issue as you. Except that i had no second device that was same model to test it out. But the rest was in pair with your explanation. I tried installing the latest drivers from the official xiaomi website, removing the old drivers and reinstalling them, restarting laptop, enabling usb debugging on phone...whatever i thought would work but none helped.
Eventually i had it working by installing the latest fastboot driver: https://drive.google.com/drive/folders/1D96njoYn-n3alu3ggaK3Kw8hMGLKhJVg
After installing it go to Device manager, then under Other devices you will see your Redmi note 9 pro. Right click -> Update Driver -> Browse my computer for drivers.
Select as folder the folder from the drive that you installed, should be named "Fastboot driver-20230301T161058Z-001" or just "Fastboot Driver", it will automatically search for the desired file "android_winusb.inf". Afterwards just press next. Your device should appear in device manager under Android Phones -> Android Bootloader Interface.
Open CMD and check if your device is now under fastboot devices. At least it worked for me. Managed to disable OEM and install the Google Pay app.