Let me explain the process to get this state:
Installed CM13.1 and flashed SUPERSU, despite the post says not to, after that stars a bootloop, the kindle only showd the first logo the orange one.
After that I flashed the original bootloader from 7.2.3 and that killed my Kindle totally.
I manage to apply this tutorial: https://forum.xda-developers.com/showpost.php?p=63860565&postcount=39 and revive my kindle.
After all the process starts on the Amazon Logo, orange, and jumps to fastboot moden and after 3 or 4 seconds it's restarts and windows can't detect the dvice, I tried to upload again all the software using KFHD_SRTool and even it uploads the same situation presents everytime.
Hopes someone can help me, I think the problem resides in the SUPERSU scripts that I upload, thanks in advance.
Leaves a video with the malfunction.
https://goo.gl/photos/AMD9AaacyoQRpQBS8
Related
So, I'm running software 6.3.1(stock), and I wanted to root. So, i followed a tutorial that said I should install TWRP recovery after I root. But, dummy me, tried to install TWRP recovery on a stock kindle fire. After a couple of minutes of installing, a console message appeared that said that the program told the kindle to boot in fastboot mode. Well, after 10 minutes, the Kindle was still not booted, so I disconnected it from my PC. And now, when I try to turn the Kindle back on, it just stops at the splash screen. I'm thinking that it's bricked, so can anyone help me get this fixed?
I have a Kindle Fire HD 7.
Shows as Tate-PVT-08, it won't turn on just shows logo then goes blank. Checked battery and has 4.6V
Had it on charge all night so should be ok.
I tried the steps in this link.? - http://forum.xda-developers.com/showthread.php?t=1951254
I've tried the SRT_1.3.5, 1.3.0. and 1.2 and still the same when rebooted.
At one point after trying the 1.3.0 I rebooted and it tried to start 3 to 4 times with the animated logo, which is more than I've been getting, then it went into system recovery with the red exclamation, so I tried a reset to factory defaults but it just went back to not starting with the logo coming on for a few seconds then disappearing.
I would appreciate some help if anyone knows how to fix it. I don't how many times I've tried.
Since nobody can help (or won't help), I tried the Kindle Fire First Aide program and now at least I get the Kindle Fire System Recovery screen with the red triangle and exclamation mark, and Reboot or Reset. I tried the reset and it just loops back to the Recovery screen.
Can anyone help me on this please?
I have to see it up close to understand the situation. Would you be willing to mail it to me for further diagnose the device?
Hello and good morning.
I am writing here, because I have a big problem. My Kindle Fire HD (first Generation) does not start any more. After an update (Cyanogenmod tate) I only get the yellow Kindle fire logo. And after few seconds the Kindle starts again. Then - after about five minutes - everything is dead. But if I do a reset I get the same situation. Unfortunately I get no connection to my device via the computer (tried Windows 7 64 bit and Ubuntu). With adb devices I cannot detect my Kindle. Is there a possibility to get into fastboot to install CWR etc.?
Help me, please
Herbert
So to clarify, the first time the logo comes up it freezes and then resets itself, followed after about 5 minutes the kindle just shuts itself off?? Also, you ask about getting into fastboot to install CWM. Do you not have a recovery installed? Such as CWM or TWRP?
I installed TWRP version 2.6
But I also cannot boot into the recovery (Power on & Vol +). Then nothing happens. I actually have ordered a fastboot-cable. Maybe I have success with this cable. Otherwise it is finished for me.
Yea try booting into recovery and flashing the system images to get back to stock. That's all i can think of since i'm not entirely sure what happened, either you got a bad download or your kindle just flipped out and essentially bricked itself.
Hey guys. Awhile back I installed cyanogenmod onto my parents kindle fire hd in order to give them a speedier experience since the stock rom was starting to get slow. It worked great! until my mom decided she did not like this OS anymore and tried formatting the device from within the OS. Now whenever I try to boot it up, it shows the red fire logo and then the blue fire logo but then goes into the TWRP loading screen. Here, it just keeps flashing the TWRP logo and won't let me do anything. The adb status is offline. I tried using the unbrick utility to no avail. Any suggestions?
readysetmosh said:
Hey guys. Awhile back I installed cyanogenmod onto my parents kindle fire hd in order to give them a speedier experience since the stock rom was starting to get slow. It worked great! until my mom decided she did not like this OS anymore and tried formatting the device from within the OS. Now whenever I try to boot it up, it shows the red fire logo and then the blue fire logo but then goes into the TWRP loading screen. Here, it just keeps flashing the TWRP logo and won't let me do anything. The adb status is offline. I tried using the unbrick utility to no avail. Any suggestions?
Click to expand...
Click to collapse
You're going to need a fastboot cable. You can find them on eBay. Once you have that, you can push a new recovery image and rom to the kindle and flash it. Then tell your mom to read up on this site before tweaking!
The story goes:
Last week I rooted my Kindle Fire. I used a YouTube tutorial and successfully achieved root. The YouTuber also recommended installing TWRP, so I thought heck, why not, and went ahead and did it.
That's where everything went wrong.
I decided to unroot my Kindle, which went fine, until I got to uninstalling TWRP. I heard the only way to get rid of it was to flash the stock ROM, so I did. When I flashed it, I got an error, and my Kindle just shut off. When I try to turn it back on, it will power up and show the screen with the Amazon logo on it and that's it. Tried again and again, and yet it stays on that Amazon screen and doesn't move.
Any ideas?
Thanks in advance.
I am having the same issue. Updated kindle fire 6 hd 4th gen to 5.0, downgraded to 4.5.3. Installed king root, rooted device, installed flashify, flashed twrp, rebooted. Now I am stuck loading. If plugged into a computer loads to the amazon logo, shuts down, loads to the logo repeat.
I have tried to fast boot by correcting drivers in device manager for the mtp whatever and constantly spamming the fast boot string.
I have used adb to see if a device ever loads and it doesn't.
Windows makes teh sound that a new device is connected for about 15 seconds then will make the noise that a device has been disconnected as the fire reboots.