Have tried flashing with stock rom, reset the phone(100 times), cleared everything, ADB, fastboot, ASUS flash tool. But then too I can't solve the issue. The phone boots into Intel inside logo and shuts down and the restarts. What'e the issue , I know its bricked. ANY SOLUTIONS
Related
Hi guys,
Well i have a little problem with my Mi3, I was on Ivan's latest lollipop ROM and I tried to flash Xposed framework on it. But at the end of the installation of Xposed, I tried to reboot my phone and it was stuck in a boot loop
I thought about flashing the lollipop ROM again, but Windows does not detect my phone anymore... I don't know what to do... I tried to format the cache/user data/delvik cache and reboot, but nothing works. I'm on CWM recovery 6.0.5.1 by furniel and donbot.
Can any of you help me with this problem ? Thanks
(And sorry if my english isn't very good, it isn't my native langage ^^)
Update: I tried to flash the ROM with the terminal (on Linux with my laptop), my Mi3 is not detected here too, it is stuck "on waiting for devices" (yes, it is on fastboot mode) I tried to do flash it with the XiaomiTool found on this forum, but same problem....
Update 2: I forgot to turn it off and it was stuck at boot loop, now it has no battery left, i tried to charge it and it doesn't charge, the red led is blinking and nothing happens...
My phone is soft bricked. I'm tried flash tools to flash stock rom. After flash when I turn on the phone it will stuck in booting. Sometimes it starts but it's showing android upgrading then it restarts again. My phones boot loader unlocked as well but when I try to flash kernal it showin failed. Pls someone help me
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
MichelFou said:
Hello,
First of all, sorry for my english as it is not my mother language
I've tried today flashing CM13 on my Wiko Rainbow, but I either failed following the instructions or the files I had were corrupted, leading to a never-ending boot.
I don't know if it was already a soft-brick back then, as the phone turned off while booting just after the installation, but 40min after it (obviously because of en empty battery, which was at 37% before installation)
At first, when the phone was plugged into the computer, the phone was booting up, showing the charging icon for a few seconds, and then was going into the infinite boot for 10 seconds, and then rebooting for the same process.
When I was charging the phone on a wall plug, the phone was just in an infinite loop.
The problem was that, when I did the Volume down + Volume up + power thing, I had a choice between Factory mode and Custom mode, but both of them led me to a black screen, and the phone powered off.
I then searched how to install a custom recovery with a soft-bricked phone, and I got a tutorial on SP Flash Tool, that told me to use a MT6582 scatter file, and to select only a Recovery. I downloaded a TWRP for my phone, and then started download, retracted the battery and plugged the phone on the computer.
I got this message : "brom error s_fthnd_file_is_not_loaded_yet"
The software told me to format the Flash, which I did, and this error now became this : "BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)"
The thing is that now, the soft brick is now a hard brick, and I can't get the phone to boot anymore, adb doesn't recognize my device, and after installing and reinstalling my phone drivers, no solution came out yet, so I'm hopping that you'll find a solution to help my problem
Thanks.
Regards.
Click to expand...
Click to collapse
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Hovatek said:
You're going to need the firmware (not just TWRP) to fix your phone. Have you been able to download it?
Click to expand...
Click to collapse
using SP Tool gives directly through the USB
Help!
Earlier today, i tried to run geekbench 3.0 and seeing that the test will took some time, i left my MI3 and let it run.
Fast forward few minutes later, i found the device bootlooping on the MI logo... restarting and keep crashing continuously.
I'm not able to access the recovery (volume up+power button) and only able to access fastboot. I've tried flashing twrp recovery over and over again through fastboot, but no luck.
Any help will be greatly appreciated!
You should probably change your battery for a new one
This has happened to me as well, but I replaced my battery and now everything is ok.
flash stock firmware... follow this if you are not sure how to..
https://www.youtube.com/watch?v=KzQ5V5ku7uQ
I just had the same like Anemiq. I was stuck in a bootloop recharging wasn't working as well. A new battery solved the problem.
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
droidprav said:
Hi all,
I have put myself in horrible situation look like phone is bricked . I can not start my phone in recovery or download mode even.
here are the series of step I had performed:
1)Unlock bootloader and intalled latest twrp-3.0.2-1-h815.img 16.5M 2016-09-15 07:23:54 EDT for ( since 815/811) has same twrp on twrp website.
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine.
3)Now the problem starts, it crashed after some time and stuck in boot loop.
4)I had tried to boot in recovery and tried to restore back up image, but it crashed in the middle and after that I was not able to start to recovery.
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom.
6) It flashed successfully, but device never got boot up and now I am unable to go to download mode.
7) Displaying small download mode symbol but device is stuck on the symbol and not going to Download mode.
I am stuck now, Is there any solution to come out of it. Please help me.
Thanks
Click to expand...
Click to collapse
droidprav said:
Now my phone starts into download mode, and I flashed the original kdz h81120v_00_0425 using download mode, after flashing first time, it went to opitmizing Apps screen but restated in middle.
After that I tried multiple times sing hard reset, but it always freeze on 2nd screen when I press yes to reset.
I flashed kdz multiple time using LG up, but it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
Current condition is now I am unable to enter download mode it respond but freeze before entering download.
I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging.
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
Click to expand...
Click to collapse
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
raptorddd said:
thats not latest TWRP... latest unified h815- h811 name is twrp-3.1.1-0-g4 official
2) tried to install lineage OS rom for 811 but the recovery gave me problem that device is 815. Please install 815 rom, so I flashed 815 and it flashed fine and device booted and worked fine. why if you know its h811.. or is it.??
5) Then I used the LG UP and flash kdz file H811V20r_00_0111.kdz for stock rom. did you select refurbished .? this will clean wipe all partitions/
not sure how to help .. but next time search for uppercut// LGUP// and itll point you to file needed..
is it a h811 or h815.. could be that outside case is switched.?
Click to expand...
Click to collapse
I know I have done few things wrong in confusion, but realized later on. It is H811 TMO model for sure.
I did select refurbished while using LG UP
My phone is not completely dead.
Pressing power button it stuck on LG logo with unlocked boot loader msg. not going to the bootloop.
I am unable to enter download mode, it responds but freeze before entering download showing 4 blue dots.
I am able to enter recovery but I can not hard reset as it always freezes on 2nd hard reset screen and not formatting.
No charging, Device Manager shows nothing.
Is there a way to recover??
I am not sure, If this is some hardware issue or emmc fault , Please help me on this..
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
ReDemonBR said:
I'm in the same situation.
I tryed to install h81120v kdz and did it perfectly, but when the phone restarted... bootloop!
And now, if I try to enter in Download Mode, a message 'Download Mode' appear with 5 blue dots and nothing else.
My computer don't recognize it
I tryed the Unbrick method with SD Card but still the same
Click to expand...
Click to collapse
exactly same problem here but i managed to get out of 9008 brick by ls991 files now i have no download mode and only a charge before turning on message on the screen really pissed off now