Related
and have a solution about how to root the device or have the version of Recovery?
I hate this modified device either, but this is the only one which support dual-SIM and a SD Card...
Umh, teorically you can unlock your phone with HTC_Dev and after flash a M7 recovery, you have to check this.
The problem that i think, is if you want to flash a custom kernel or an europe/american rom, this, because, you have two sim and (i think, but probably i'm right) this one have a differente kernel like our...
May be i'm wrong.
Guich said:
Umh, teorically you can unlock your phone with HTC_Dev and after flash a M7 recovery, you have to check this.
The problem that i think, is if you want to flash a custom kernel or an europe/american rom, this, because, you have two sim and (i think, but probably i'm right) this one have a differente kernel like our...
May be i'm wrong.
Click to expand...
Click to collapse
Tried but failed, I have unlocked my phone and flash a M7 Recovery but not work and now I'm using a phone without recovery.
Seems not only with M7, those modified phones all have different kernels. I also tried the 802W recovery but failed again. Maybe there won't be a solution?
With 802W recovery you can't boot into it?
Is TWRP or CWM?
you can see relative threads on gfan forum, there already is a permanent root solution
Unlocking the dual sim variant is the same as unlocking an international one.
May be much easier for me to reply in Chinese
人云奕云 said:
you can see relative threads on gfan forum, there already is a permanent root solution
Unlocking the dual sim variant is the same as unlocking an international one.
May be much easier for me to reply in Chinese
Click to expand...
Click to collapse
You can use Chinese if allowed, of course.
Allright, now there is a root for 802T.
人云奕云 said:
you can see relative threads on gfan forum, there already is a permanent root solution
Unlocking the dual sim variant is the same as unlocking an international one.
May be much easier for me to reply in Chinese
Click to expand...
Click to collapse
I have a 802T (China Mobile) and can't get it to recovery. Unlocking the bootloader was not an issue and flashing CWM recovery worked
also well, but when I try to boot in recovery mode it starts loading and then stops and boots regularly.
Ah, ok I guess I found the threads you were refering too, but since they're in Chinese I can't read a lot.
Is it possible to get instructions in English?
cheers
Luc
I am also on this step, unlocked no problem but has the same thing happen when I try to root it. My girlfriend can read Chinese but it's too hard for her to translate it to me because she isn't very tech savvy.
Htc one 802t rooting issue
Same problem. Got a china mobile Htc one 802t
Stuck with sad bloatware and no google play.
How do I root?
LuciusVerus said:
I have a 802T (China Mobile) and can't get it to recovery. Unlocking the bootloader was not an issue and flashing CWM recovery worked
also well, but when I try to boot in recovery mode it starts loading and then stops and boots regularly.
Ah, ok I guess I found the threads you were refering too, but since they're in Chinese I can't read a lot.
Is it possible to get instructions in English?
cheers
Luc
Click to expand...
Click to collapse
Cloudnines said:
I am also on this step, unlocked no problem but has the same thing happen when I try to root it. My girlfriend can read Chinese but it's too hard for her to translate it to me because she isn't very tech savvy.
Click to expand...
Click to collapse
Loveanki said:
Same problem. Got a china mobile Htc one 802t
Stuck with sad bloatware and no google play.
How do I root?
Click to expand...
Click to collapse
you can search for the solution here in One Q&A. I came across the same problem myself when flashing recovery.
I don't really recall how I got into recovery. Try this:
~Make sure quick boot mode of your phone is off
~Flash the recovery via fastboot command.
~after flashing the recovery, do
Code:
fastboot erase cache
in cmd
~reboot bootloader.
~Go to HBoot see if it shows "TAMPERED unlocked" on top of the screen. (if it does then you're to go).
~If HBoot shows no "TAMPERED", unplug your phone and do a factory reset in HBoot menu.
~after the phone boots up, shut it down
~Boot to HBoot by pressing power and Vol- , you should see "TAMPERED unlocked" (doesn't work for everyone)
~If not, see if this help:
http://forum.xda-developers.com/showthread.php?t=2182792
read the replies carefully you should find the solution
Also, someone suggests that reboot bootloader a few more times you can eventually get "TAMPERED unlocked" and boot into recovery.
I DONT THINK ANY OF THE CUSTOM ROMS IN XDA IS WORKING ON 802T SO BE CAREFUL !
Hello
I just received my one double sim, hope I can put gapps, and use of Google account.
Did you try to install a market to install app?
802t root
Aha! Found this thread finally...
I've got the same problem, trying to root the 802t Chinese version. Has anyone found an easy to follow solution in English yet?
I'm in the same boat too. I have a 802d. I need another ROM.
So it seems that some owners flashed custom recovery.
For those who have problem to go in recovery, I've got the same on my HK version (which is M7_UL).
To solve this issue, I just keep flashing in fastboot (cmd line). The all-in-one tool was not working well for me. But at least it provides all what you need (adb and fastboot).
Very important: remove the "fastboot" option from the ROM Energy parameters. It's in the setting of Android, it's not the 'fastboot' we're talking about to flash. This cause problem to access recovery, even if the flash was ok. So make sure you find this option which is activated by default.
If someone can confirm he's done it. I will do on my wife's 802d and post step-by-step instructions.
Before flashing a ROM we need to have advices from dev. we have SD support, dual SIM, different base band...
We will loose some functions by flashing a UL ROM. We need to know which one first. We can also loose all the functions... I mean brick the phone!
There is no RUU yet available for 'non chinese reading people'. Take this into account before trying
Do someone has tried a backup/restore in recovery? Does it work?
I'm not a dev but I can understand questions or tests. I do not have the solution but will be very happy to get info from my phone for people who have the knowledge I'm missing
---------- Post added at 10:48 PM ---------- Previous post was at 10:35 PM ----------
人云奕云 said:
you can see relative threads on gfan forum, there already is a permanent root solution
Unlocking the dual sim variant is the same as unlocking an international one.
May be much easier for me to reply in Chinese
Click to expand...
Click to collapse
Hi, could you paste some links to this forum?
I'm used to read Chinese website with chrome translate.
it's good enough to find what I need I think.
But you mean at least that I can flash CWM on the 802d the same way I've done on my 801s (HK)?
It's safe and after I can boot the original ROM again? I know it will also reset the phone and delete all data.
I know it's exactly what you write but I prefer double check. My wife will kill me if I brick her new phone...
On the Chinese forum they are using Chinese custom ROMs with baidu apps, weibo... or something more 'google'?
For example in the 'stream' (the main page) of sense 5 she has only news of China in Chinese! On my phone (the same in fact), I have the french news... She complains
truc007 said:
I'm in the same boat too. I have a 802d. I need another ROM.
So it seems that some owners flashed custom recovery.
For those who have problem to go in recovery, I've got the same on my HK version (which is M7_UL).
To solve this issue, I just keep flashing in fastboot (cmd line). The all-in-one tool was not working well for me. But at least it provides all what you need (adb and fastboot).
Very important: remove the "fastboot" option from the ROM Energy parameters. It's in the setting of Android, it's not the 'fastboot' we're talking about to flash. This cause problem to access recovery, even if the flash was ok. So make sure you find this option which is activated by default.
If someone can confirm he's done it. I will do on my wife's 802d and post step-by-step instructions.
Before flashing a ROM we need to have advices from dev. we have SD support, dual SIM, different base band...
We will loose some functions by flashing a UL ROM. We need to know which one first. We can also loose all the functions... I mean brick the phone!
There is no RUU yet available for 'non chinese reading people'. Take this into account before trying
Do someone has tried a backup/restore in recovery? Does it work?
I'm not a dev but I can understand questions or tests. I do not have the solution but will be very happy to get info from my phone for people who have the knowledge I'm missing
---------- Post added at 10:48 PM ---------- Previous post was at 10:35 PM ----------
Hi, could you paste some links to this forum?
I'm used to read Chinese website with chrome translate.
it's good enough to find what I need I think.
But you mean at least that I can flash CWM on the 802d the same way I've done on my 801s (HK)?
It's safe and after I can boot the original ROM again? I know it will also reset the phone and delete all data.
I know it's exactly what you write but I prefer double check. My wife will kill me if I brick her new phone...
On the Chinese forum they are using Chinese custom ROMs with baidu apps, weibo... or something more 'google'?
For example in the 'stream' (the main page) of sense 5 she has only news of China in Chinese! On my phone (the same in fact), I have the french news... She complains
Click to expand...
Click to collapse
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6285336
This is a Rom with permanent root that works on 802d/w/t , there's a special Recovery for Mainland China variants provided in the thread.
Here's the hidden download link of the rom in case you have trouble registering:
http://pan.baidu.com/share/link?shareid=581602&uk=3660368359
I read the instruction, the rom comes with removable bloatware of Chinese carrier and promotion apps from the Rom builder. And aroma has been removed in order to solve the freezing problem.
as for the news*sources, I don't know. Some said they flashed the rom and get foreign sources, some said they get local sources with the very rom.
Still, I must WARN you I'm NOT a Chinese variant user and have no experience on rooting or flashing roms on one. It's your own risk.
Read the instruction carefully!!
Rooted vanilla ROM
wow, this sounds promising! Thank you for that~~
The next question I have is, if I don't want a custom rom, I just want to use the original rom but rooted, can I still just install the regular superuser.zip once i've installed this custom recovery?
Wouldn't that work?
Ok, we can thanks 人云奕云
I've downloaded the recovery and the custom ROM. he's right, easy to translate a forum but going through registration...
I've seen that they are also following xda as a lot here are using imported versions. I will not be surprized to find a port from UL version soon.
When I check the apps in the ROM zip, i can see many google apps, sounds good.
Do not be too happy for now. Nothing says that the ROM is what we expect. But at least it will root our phone and open it a little bit.
I will give it a try when I can get my wife's phone.
Recovery and boot (+required adb and fastboot) can be downloaded from here:
XXXpan.baidu.com/share/link?shareid=581597&uk=3660368359#dir
(remove XXX and paste the link)
Be carefull you need to choose the good file. For recovery it's easy (d/t/w), for boot you need to use google translate:
When you download the files you may not be able to see chinese characters.
nb: I don't understand why there is a boot.img to flash. Be carefull for now.
For me: the order is the same as on the site. So download accordingly.
1st: 移动版一键刷入 = china mobile (802t)
2nd: 联通版一键刷入 = china unicom (802w)
3rd: 电信版一键刷入 = china telecom (802d)
---------- Post added at 09:29 AM ---------- Previous post was at 09:21 AM ----------
mrmistophelees said:
wow, this sounds promising! Thank you for that~~
The next question I have is, if I don't want a custom rom, I just want to use the original rom but rooted, can I still just install the regular superuser.zip once i've installed this custom recovery?
Wouldn't that work?
Click to expand...
Click to collapse
For me yes.
In the zip of the ROM I have there is Superuser.apk in system apps folder.
I imagine you can try (Nandroid backup first!).
If the zip just put the apk in system/app it can work. But I have no idea if the paths/partition for this folder are the same between the models, I'm not a dev at all.
On the Chinese forum they refer to this thread as support: http://forum.xda-developers.com/showthread.php?t=2182792
Follow it to unlock via HTCdev but flash the specific recovery files (and boot?), not the one on xda.
---------- Post added at 09:55 AM ---------- Previous post was at 09:29 AM ----------
pilot73 said:
Hello
I just received my one double sim, hope I can put gapps, and use of Google account.
Did you try to install a market to install app?
Click to expand...
Click to collapse
Yes, you can find the Play Store in baidu apps.
But on my phone it just open then close directly. Maybe you need to install additional things. The worst for me is the "blink feed" only for China and only in Chinese, you can go around the lack of Play store by downloading apks directly.
Even the web Play Store does not work. My one is recognized as a 'samsung something' and when I click on Install, nothing happens. But I'm in China, so maybe out of mainland it's different (no great firewall).
try and report please.
you can also try to unlock the phone and flash the Gapps.
I can confirm that superuser installs and works perfectly (so far!) on the 802t. The modified CWM recovery from the chinese forum works great, and allows us to get into recovery mode.
Phone is rooted finally,
Tested with Titanium Backup~~
Thanks everyone! :good:
mrmistophelees said:
I can confirm that superuser installs and works perfectly (so far!) on the 802t. The modified CWM recovery from the chinese forum works great, and allows us to get into recovery mode.
Phone is rooted finally,
Tested with Titanium Backup~~
Thanks everyone! :good:
Click to expand...
Click to collapse
That's good news!
I just finished to change the apps in the Chinese custom ROM (I used the one from mike1986's ROM).
I will test it tonight.
Ok, that's straight forward:
0/ download the required tools: use All-in-One tool in the sticky of HTC One section at xda.
BE CAREFULL: do not use the recovery provided, it's just to avoid downloading the Android SDK!
1/ unlock your phone using HTCdev website.
You need to register in order to get your unlock file.
Unlock your phone with fastboot. Just follow HTCDev instruction.
2/ install the recovery you find on the Chinese website.
BE CAREFULL: One recovery per type (802d/t/w)
I've done:
fastboot erase cache
fastboot flash recovery recovery.img (rename the one you download accordingly)
fastboot erase cache
Switch off/on the phone.
3/ download the ROM from Chinese website.
This ROM is from XiaoXiang8002. I didn't ask permission to put his ROM here. I can't communicate in Chinese. Anyway, thanks to him!
Before flashing I changed some apk I took in mike1986's ROM (xda dev section for dwnld)
nb: on first attempt I swapped too much apps... com.android.phone keeps FC.
4/ push the ROM on the internal storage (not external SD)
5/ boot in recovery (it's touch version), and flash the ROM:
flash
factory reset
wipe cache
reboot
enjoy...
truc007 said:
Ok, that's straight forward:
0/ download the required tools: use All-in-One tool in the sticky of HTC One section at xda.
BE CAREFULL: do not use the recovery provided, it's just to avoid downloading the Android SDK!
1/ unlock your phone using HTCdev website.
You need to register in order to get your unlock file.
Unlock your phone with fastboot. Just follow HTCDev instruction.
2/ install the recovery you find on the Chinese website.
BE CAREFULL: One recovery per type (802d/t/w)
I've done:
fastboot erase cache
fastboot flash recovery recovery.img (rename the one you download accordingly)
fastboot erase cache
Switch off/on the phone.
3/ download the ROM from Chinese website.
This ROM is from XiaoXiang8002. I didn't ask permission to put his ROM here. I can't communicate in Chinese. Anyway, thanks to him!
Before flashing I changed some apk I took in mike1986's ROM (xda dev section for dwnld)
nb: on first attempt I swapped too much apps... com.android.phone keeps FC.
4/ push the ROM on the internal storage (not external SD)
5/ boot in recovery (it's touch version), and flash the ROM:
flash
factory reset
wipe cache
reboot
enjoy...
Click to expand...
Click to collapse
Ok, 2nd attempt was good. But I don't have the "blink feed" I want.
Anyone knows how I can change this? Which apk manage it?
For the rest, I have google account, flickr... but no Play Store, only HTC. Let's flash Gapps... does not work.
Same question with Play Store. Which apk? no more vending.apk in system apps...
I do not deserve a beer but do not hesitate to click thanks button
Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/
SToNeD said:
Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/
Click to expand...
Click to collapse
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.
jazz452 said:
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.
Click to expand...
Click to collapse
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.
Is there no improvements from 6.5.1.0 version?
Also how do I flash twrp on my phone? Do I need root?
Thanks
jazz452 said:
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.
Click to expand...
Click to collapse
Can you tell me if German is included? Cant find it in the list on xiaomi.eu - now I'm a little bit unsure.
Can't see German even after installing.
Sent from my MI NOTE Pro using XDA Free mobile app
European Modem??
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??
langas said:
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??
Click to expand...
Click to collapse
Here you go bro :
http://en.miui.com/thread-118114-1-1.html
I just flashed this rom and i can confirm that it works well here in the uk on the ee 4g network no problems for me and very happy with this phone
Are there any instructions on how to install it?
I found TWRP, but need root to install it which i don't have.
Just boot to TWRP first via fasboot by using fastboot boot twrp.img command,
Then flash supersu,
After u got root access, install flashify and flash twrp
Is French included in this ROM? Probably not...
Will my apps be in French anyway or will it go like the UI?
Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!
gavjs said:
Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!
Click to expand...
Click to collapse
It works fine for me in UK, full wipe in TWRP? You said first with TWRP and then Mi, did you reflash original recovery. I always find that after flashing a new rom I have to reflash GAPPS or I get the problems you describe.
I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks
gavjs said:
I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks
Click to expand...
Click to collapse
Like I said just reflash google apps no need for full wipe, use TWRP, keep a copy of GAPPS on your phone along with the rom so wiping won't be a problem should you need too.
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Charles Broccoli said:
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Click to expand...
Click to collapse
I think you need to CAREFULLY read this thread before thinking of writing something.
I did not ask for OTA updates. I did not ask for stock. I asked for a functioning TWRP backup of the Le S3. Thats it.
Rico
Please play nice ppl
Deleted
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
britdude said:
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
Click to expand...
Click to collapse
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
iamrico00 said:
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
Click to expand...
Click to collapse
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Official twrp work too... Just ota fuxed
---------- Post added at 06:04 PM ---------- Previous post was at 05:43 PM ----------
Also i noticed for le s3, the update is 5.8.020s instead of the 5.9.020s that's available for the chinese le 2
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
iamrico00 said:
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
Click to expand...
Click to collapse
I've used that twrp baclup numerous times without a problem.....
i would suggest, going back to twrp, and erase data, then restore again and see what happens
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
xterminater07 said:
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
Click to expand...
Click to collapse
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
britdude said:
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
Click to expand...
Click to collapse
You tried that way?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
You tried that way?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
yes i have tried that way, i have also tried it a diff way if you read down a few comments...
its on my phone running smooth which ever way you go...its all good
xterminator07 has worked hard at getting this full rom file for us..
please thank him
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
potatoalien said:
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
Click to expand...
Click to collapse
You need to unzip the firmware file, remove top 2 lines from META-INF\com\google\android\updater-script and zip it again, it will remove the platform check. However device still does not boot, I tried to install both 20S and 21S multiple times. My guess is we need the original recovery partition image for X522 and I could not find it anywhere.
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
virx14 said:
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
Click to expand...
Click to collapse
Hmm I might try that later, but what would I do if I get the classical error ("this package is for "le_s2_na" devices")? Will that error not show up if I follow your method?
Hello,
I need advice, please. MOTO G2 (2014) XT1068
XT1068 unlocked>TWRP installed>TWRP Fix permissions clicked>now boot animation and goes into black screen (with backlight).
More detailed:
Last night I have unlocked my XT1068 and installed TWRP, no problem.
(following this https://www.youtube.com/watch?v=BLSTDsFG1xw, citing https://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165).
First deviation was I got TWRP from http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img as I ran into an unavoidable sign-up trap following the cited url).
Second deviation was I chose to install SU offered by the TWRP app via Gplay, which was unsuccessful.
So I decided to go back and follow the instruction, using the provided "Update SU" file but found my Windows Explorer but it didn't give me access to internal memory or SD card. After short research, I found that XT1068 "developer options>USB configuration" toggling MTP to Charging only and back MTP helped https://www.reddit.com/r/Android/comments/3nnkaa/cant_access_android_device_internal_storage_from/ as the Windows Explorer was able to access the XT1068 memory. (SD card was setup as internal memory).
I copied the file over, rebooted into TWRP but couldn't see the file. I remember having seen something like "unable to mount or access memory" in TWRP and remembered from XDA thread that permissions might be messed up. It was late, I jumped to a conclusion when I found the TWRP option "Fix permissions". I clicked it and have since the issue.
I can get into the menu which offers "recovery" and also get into TWRP
I have tried "Factory reset" but I am not sure what happens there, Motorola boot animation comes and then the black screen again (with backlight)
I think I have options but feel like in a minefield and better ask for what to do next.
Thank you
can you tell me you're bootloader version and on what android version you were when you messed up things? If your phone boots up to the bootloader i.e. the menu which allows you to enter recovery then you're having more than one options to fix this problem. But be careful this time. as this may brick your phone and it will be gone for good..
Read this XDA thread and do the steps carefully. This may restore your phone
https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
Hi, I had the stock Marshmallow and bootloader is showing 48.86 (if that is actually the number). I was aiming to do a titanium backup and then probably try a custom ROM.
I will follow the steps in the link provided to get back to a known working state before trying a custom ROM but I really like to understand what went wrong and in what state the phone now is. I don't think my deviations where a bad choice but clicking "Fix permissions" obviously was. I like to learn from mistakes.
Thanks for helping me out.
Ok, read the guide and am uncertain which firmware is the correct one for New Zealand (the thread is full of confusion about the versions). I am waiting for a reply there and asking here if I could from this point also try to flash a custom rom via TWRP? Or better back to a working condition before doing this? Thanks.
karteileiche said:
Ok, read the guide and am uncertain which firmware is the correct one for New Zealand (the thread is full of confusion about the versions). I am waiting for a reply there and asking here if I could from this point also try to flash a custom rom via TWRP? Or better back to a working condition before doing this? Thanks.
Click to expand...
Click to collapse
Umm.. About the firmware version of the stock ROM, you can search google for it. And as far as your question about trying a custom ROM, you can try whichever ROM you want (except Ubuntu Touch, it's installation methods are too confusing). Just download the ROM in .zip file and download "Google Apps (GApps)", I prefer open gapps and install the rom via TWRP.
Wipe out these paritions in TWRP > Wipe > Advanced Wipe:
Dalvik/ART cache
Cache
Data
System
Also before installing any custom ROM read the steps plus read user comments before flashing anything
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
pkdon123 said:
Umm.. About the firmware version of the stock ROM, you can search google for it. And as far as your question about trying a custom ROM, you can try whichever ROM you want (except Ubuntu Touch, it's installation methods are too confusing). Just download the ROM in .zip file and download "Google Apps (GApps)", I prefer open gapps and install the rom via TWRP.
Wipe out these paritions in TWRP > Wipe > Advanced Wipe:
Dalvik/ART cache
Cache
Data
System
Also before installing any custom ROM read the steps plus read user comments before flashing anything
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
Click to expand...
Click to collapse
Yes, thanks.
I have flashed ROM's successfully before on Galaxy S3 and Tab 2 and used gapps via TWRP.
I have tried Google for the correct version but find myself turning in circles, most-likely my limited search term knowledge.
https://www.reddit.com/r/MotoG/comments/4bgg02/info_all_moto_g_codenames_models_variants/ shows "XT1068 : Latin America/EU/UK/Asia/Australia/Germany/Brazil/India, Dual SIM" and the listed ROMs named XT1068_TITAN_RET ...(BR for Brazil?) (LA for Latin America?) (DSDS for India?) (GB for UK?) (DE for Germany?) then what? Some are obvious others are what I have read through various comments, DSDS may even be for (EU/INDIAN/GLOBAL), I have not been able to find a really good page explaining this.
You did not answer my last question directly but given that you stated how to flash a ROM and what to wipe, I assume you mean that I could alternatively install a custom ROM at this stage. (Which is what I had planned originally).
Still, would be nice to know the correct firmware version and also why clicking "Fix permission" turned things into custard.
Thanks.
pkdon123 said:
.........
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
Click to expand...
Click to collapse
Yeah, I´ve seen in the post of @karteileiche that link: http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img. That recovery is outdated and not from the original source. Maybe that´s the reason why things get messed up.
Downlad latest TWRP always from this site if you don´t need something unoffical for your device: https://dl.twrp.me/
For titan this would be: https://twrp.me/motorola/motorolamotog2014.html
About installation of custom roms: When you check any thread of custom roms you´ll find in the OP what to wipe and what to use.
And imho it would be better to first flash the actual recovery before flashing any custom rom.
Valid point, thanks for reminding me and providing the link.
karteileiche said:
Valid point, thanks for reminding me and providing the link.
Click to expand...
Click to collapse
You're welcome. Just send me a PM if you need further help or instructions.
Sent from my Moto G 2014 using XDA Labs
Wolfcity said:
Yeah, I´ve seen in the post of @karteileiche that link: http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img. That recovery is outdated and not from the original source. Maybe that´s the reason why things get messed up.
Downlad latest TWRP always from this site if you don´t need something unoffical for your device: https://dl.twrp.me/
For titan this would be: https://twrp.me/motorola/motorolamotog2014.html
About installation of custom roms: When you check any thread of custom roms you´ll find in the OP what to wipe and what to use.
And imho it would be better to first flash the actual recovery before flashing any custom rom.
Click to expand...
Click to collapse
Yeah.. I Agree with your point?
---------- Post added at 03:34 AM ---------- Previous post was at 02:45 AM ----------
karteileiche said:
Yes, thanks.
I have flashed ROM's successfully before on Galaxy S3 and Tab 2 and used gapps via TWRP.
I have tried Google for the correct version but find myself turning in circles, most-likely my limited search term knowledge.
https://www.reddit.com/r/MotoG/comments/4bgg02/info_all_moto_g_codenames_models_variants/ shows "XT1068 : Latin America/EU/UK/Asia/Australia/Germany/Brazil/India, Dual SIM" and the listed ROMs named XT1068_TITAN_RET ...(BR for Brazil?) (LA for Latin America?) (DSDS for India?) (GB for UK?) (DE for Germany?) then what? Some are obvious others are what I have read through various comments, DSDS may even be for (EU/INDIAN/GLOBAL), I have not been able to find a really good page explaining this.
You did not answer my last question directly but given that you stated how to flash a ROM and what to wipe, I assume you mean that I could alternatively install a custom ROM at this stage. (Which is what I had planned originally).
Still, would be nice to know the correct firmware version and also why clicking "Fix permission" turned things into custard.
Thanks.
Click to expand...
Click to collapse
Yess, you can try installing custom rom and see if that works.. otherwise flashing stock rom will also be an option for you.
Fixed
Resolved by using the latest TWRP version and a clean flash of a custom ROM.
Thank you Wolfcity :good:
Fixed
Resolved by installing the latest TWRP version and a clean fash of a custom ROM.
Thank you Wolfcity :good:
karteileiche said:
Resolved by installing the latest TWRP version and a clean fash of a custom ROM.
Thank you Wolfcity :good:
Click to expand...
Click to collapse
You're welcome. Nice to hear it's working.
Sent from my Moto G 2014 using XDA Labs
Hello.
I've been playing with some custom ROMs, recoveries, etc. on S10 SM-G973F. Every time something went wrong I was able to flash stock Android 11 ROM with Odin and run the system after that. But not anymore...
At this moment I have access to Recovery Mode (stock, TWRP, LineageOS... whichever I flash with Odin) and Download Mode. When I try to power on the phone with button or with an option Boot to System from Recovery the phone turns off and nothing else happens. Black screen only, no vibration, etc.
I tried to format data and cache in Stock Recovery and TWRP. I tried to flash many time, changed USB cable, change USB port... nothing helps.
What is strange that after I flash the stock recovery the phone boots one time displaying the unlocked bootloader warning, Samsung logo and Android robot icon with an Erasing sign... but just for a 1-2s, very short time. Before the problem occurred the Erasing took much much more time. After that one time I cannot make to display bootloader unlocked warning and Samsung logo any more, no matter which ROM or recovery I flash.
Maybe you can try installing the original firmware and start over again.
That is what I do in the first place, I try to flash the original firmware with Odin. I use the same files as before. The only difference I can see is that after the flashing the Erase progress was very long and now it is only 1-2s and the phone turns off.
Ok, I've found my mistake and a solution. I will post it here if anyone else has a similar problem.
So while I was playing with different ROMs one of them had an instruction to flash G973FXXSCFUH5-twrp_flashable.zip that included:
modem.bin
dt.img
dtbo.img
cm.bin
sboot.bin
up_param.bin
keystorage.bin
uh.bin
The zip included was to an older firmware G973FXXSCFUH5, while I was already on newer G973FXXSEFUJ2. But the TWRP that I used to flash the zip did not protest and the process finished well. Causing the problems above of course.
Don't know why but flashing the whole original G973FXXSEFUJ2 firmware with Odin was not enough. But when I flashed G973FXXSEFUJ2-twrp_flashable.zip from the TWRP worked and made the phone operational again.
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
FabienGege said:
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
Click to expand...
Click to collapse
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
.
Doman said:
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
Click to expand...
Click to collapse
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Mohammed_9564 said:
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Click to expand...
Click to collapse
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Mohammed_9564 said:
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Click to expand...
Click to collapse
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973F
Doman said:
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973
Click to expand...
Click to collapse
Thanks for the help brother I appreciate it
For months I've tried searching for a solution to fix my SM-N976U that stopped booting up. None of the symptoms shared fully matched what I was experiencing, so every fix I attempted didn't get her fully functioning again, eventually I gave up trying, stuffed the phone in a drawer and just bought another one. Today I stumbled upon your post and every symptom you described fit exactly with what happen to me, I mean to the T, minus the model and fw version. So I grabbed my SM-N976U one more time and followed your solution... and guess what??? I am now a proud owner of 2 note 10 plus'!!!
Thank you so much for taking the time to share your experience and solution!! Cheers to you bud! Have a great New Year!
Thank you~! my s10 plus is back!