Database Develop

Bricked i9001! Help!

I have a problem with a i9001. I tried everything I can think off. It always stops when flashing in Odin 4.43 on:
<1>setup connection.....
I tried 3 different computers and all usb ports. Reinstalled Kies, installed only the samsung drivers. Rebooted several times. But still stops ons setup connection in Odin. I used several flashfiles: the seperate ones and the complete package....
I also used the jig to get the i9001 in download mode. To get the phone in Download mode is no problem, it works with the jig and also with the key combination. When i try to power the phone normal i get the Black Screen of Death. I also tried 4 different usb cables.
Can someone help?
Thanks in advance....

JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX

cabloomi said:
JUST USE THE ONECLICK UNBRICK
http://forum.xda-developers.com/showthread.php?t=1153310
DONT FORGET 2 SAY THX
Click to expand...
Click to collapse
This tool is not for i9001 i think. But thanks anyway.

Help!

Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?

i had that problem with two phones, my i9000 and my friends rogers infuse. try different usb ports on the computer. if that dont work, look up some stock firmwares for you phone and try to flash them. i find the original stock roms work best for fixing this. just be calm, there is always a way to fix it as long as you dont fry nothing.

wintel_mac said:
Did you try another ROM for flashing? Or did you try to just flash a recovery and boot into that recovery? If you run ODIN with Vista / 7: did you right click and run as administrator? Did you take out the battery of your phone for about 10 min and then insert USB and battery back and try again...?
Click to expand...
Click to collapse
I tried 5 different computers (Windows XP and Windows 7), 5 different usb cables, several flashfiles. Always stops at setup connection.

I am still having the problem. i really tried everything I can find.

Have you installed the USB drivers for your phone? It is also important to kill ANY running KIES application/service via task manager.
Sent from my GT-I9000 using XDA

I have exactly the same problem... Does anyone figured it out how to fix it?

Everything you should try first is written above ur post

Ajoslaf said:
Everything you should try first is written above ur post
Click to expand...
Click to collapse
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!

H83 said:
Well, I'd install the drivers and I don't even have kies installed... but I'm still stuck at the SetupConnection step!
Click to expand...
Click to collapse
look at My Android solutions link below, you need to use task manager to kill KIEs related files when running ODIN

[HELP] nokia x2ds rm-1030 dead, flash 2.1.0.12 complete, flash 2.1.0.13 stuck

Hello ned help..
rm-1030 flashing rom 2.1.0.12 complete Done
i have two version
RM1013_059V788_2.1.0.12 and
RM1013_059V786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059V78 always stuck at rm1013_2.1.0.13_user_NON-HLOS.bin
and shown error dialog "failed using firehouse protocol"
need help..
ive try to redownload ROM.. but keep error
im sorry i cant upload picture coz need 10 posts but im using txt file

maybe the firmware you downloaded is corrupted.. where did you downloaded your firmware files? I use navifirm+ but yesterday I'm trying to redownload a rom but navifirm+ seems to be not working any more..

thaks for replay,
iv downloaded from Package Majnager .. and from this seidea.com/tag/rm-1013-2-1-0-13/
its still blank screen and just detect "emerency connecivity

first download nokia-x2-tools.v.1.2.en.exe, from the tool install drivers.. then go to your "C:\ProgramData\Nokia\Packages\Products\RM-XXX" and delete all files or move it somewhere if you don't want to delete.. and replace everything with the files that you downloaded.. and run "Lunch Nokia Care Suite" as administrator.. and flash your firmware..

thaks...
I thinks its hardware problem.. coz i have 5 different firmware and already used maximal method
change folder.. remove.. redownload.. and anythink
and my phone cant detect fastboot or recovery
btw thaks

aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..

I have exactly same problem havent found solution yet.
I have same problem too
arisjb said:
hello ned help..
Rm-1030 flashing rom 2.1.0.12 complete done
i have two version
rm1013_059v788_2.1.0.12 and
rm1013_059v786_2.1.0.12 but still dead..
Usb detect as emerency connectivity
when im flash using rom rm1013_2.1.0.13_059v78 always stuck at rm1013_2.1.0.13_user_non-hlos.bin
and shown error dialog "failed using firehouse protocol"
need help..
Ive try to redownload rom.. But keep error
im sorry i cant upload picture coz need 10 posts but im using txt file
Click to expand...
Click to collapse

Remove battery from device atleast 1min
Insert battery
Start device in bootloop and if not start only connect to PC
Start Nokia care suite >product software > open product> select device and flash

jepr0x1011 said:
aw.. that's too bad.. I fixed my completely dead x2 with that method though.. it has no fastboot and undetected adb but I recover it somehow, I think it's just a luck..
Click to expand...
Click to collapse
My Nokia X2 had also give completely dead. I tried to Flash stock ROM in it via Nokia care suite and which I've even done previously however this time my phone had gone completely blank and does not even go to recovery mode. It has gone completely unresponsive. Please help me on this.

Help with Xiaomi mi5

Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk

Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts

casuk said:
Hi I just recived my mi5 and was wanting to put a stock android rom on it that is stable, I see a couple of ROMs on here but not sure what to use or where to start if anyone can give me a guide and correct ROM to use, I'm in UK Scotland
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If I were you I would definitely flash Lineage OS, its really solid, fast and has a good battery life.
Check this post for instructions. And give him a big thank

Spevky said:
Please help me my phone is in EDL mode and i can't flash anything on it. It does not turn on no led no light no display no response. Just Qualacomm QDLoader 9008
Everytime i flash it gives me an error.
Max buffer sector is 256.
Errors and so on.....
How to fix please
I have reinstalled all drivers and programs , tried a lot of miflash versions , fastboot roms like 6-8. Many pc restarts
Click to expand...
Click to collapse
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.

xdadevet said:
I had the exact same problem, it happened randomly after a normal reboot. I was considering taking it apart to disconnect the battery, try a deepflash cable and EDL but then I solved it.
The problem is your Windows driver. That's why you can't flash anything. Read up on Xiaomi forums about the problem. I can't remember exactly how I solved it, but I think I uninstalled the driver, plugged the phone back in, wait for the automatic install on Device Manager, then for it to update, do a roll back and then flash it via MiFlash.
Click to expand...
Click to collapse
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?

Spevky said:
Thanks. THat must be the problem. But i tried on my friends pc too and it did not work. Maybe Windows 7 is the problem? Im installing Windows 10.
Which OS do you have?
Click to expand...
Click to collapse
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.

xdadevet said:
I don't think Windows 7 is the problem, but I've been using Windows 10 for 3 years (as Beta user) so I can't tell. Boot into EDL (Phone must be powered off, then hold both "Volume UP" and "Volume Down" as you plug it into the computer, only then do you let go) and tell me what driver your phone is seen as in Device Manager.
Click to expand...
Click to collapse
It is detected as QDLoader 9008 version of QDLoader 9008

im trying to follow the guides but im not understanding what to do I have downloaded adb and fastboot I extracted the files to a folder and im now stuck, whats this mean
•Append ;%USERPROFILE%\adb-fastboot\platform-tools to the end of the existing Path definition (the semi-colon separates each path entry)
that's were im am so far and im basically lost and need so help if anyone is kind enough to go through the steps with me
thanks
Ok I've unlocked the phone but i can seem to be able to root it

QFIL Unbricking - almost dumb question

I am trying to unbrick via 7z firmware with QFIL with a Deep Flash/ EDL cable. Still getting a lot of errors (especially Saharas). Anyhoo, my question is.....
Upon a failed "download" on QFiL, can I just move along and just load up and attempt different settings or firmwares from there? Do I need to OFF the phone or restart QFIL or anything?
I don't want to think I am testing for a different result , if a different result is impossible. Thanks.

enzyme said:
I am trying to unbrick via 7z firmware with QFIL with a Deep Flash/ EDL cable. Still getting a lot of errors (especially Saharas). Anyhoo, my question is.....
Upon a failed "download" on QFiL, can I just move along and just load up and attempt different settings or firmwares from there? Do I need to OFF the phone or restart QFIL or anything?
I don't want to think I am testing for a different result , if a different result is impossible. Thanks.
Click to expand...
Click to collapse
Try to install the latest qfil and usb drivers for zuk z2 pro, uninstall qfil and old usb drivers and install new ones. Also try inserting to different usb ports.
Had the same problem weeks ago and its a hard brick. Took me a week to solve it...hehehe

enzyme said:
Upon a failed "download" on QFiL, can I just move along and just load up and attempt different settings or firmwares from there? Do I need to OFF the phone or restart QFIL or anything?
Click to expand...
Click to collapse
As long as the phone stays in 9008 mode (check that in windows device management), you can start flashing. No reboot required.
Remember, this device is unbrickable (except if you have faulty hardware), stay patient & follow the howto's to the letter.

Yeah I understand. With this phone it is so spotty and inconsistent as far as how and when things work. I was bricked then was able to do a download successfully with no error once. Ironically, that flash just bricked it differently.

I haven't managed to brick it once.... did manage to flash wrong ROM on top of wrong firmware. Try that with most other devices, and you're in a world of hurt.

Zuk z2 pro bricked

Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.

darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Hi,reboot your computer or change USB port.
Inviato dal mio ZUK Z2121 utilizzando Tapatalk

I'm having problems with Qfil ...
It is giving the following error: "download fail: FireHose Fail FHLoader Fail: Process fail"
Any answers to what might be?

darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Is not your version of the recovery is wrong, what version of recovery you are using?

Hi
I have also bricked my Zuk Z2 pro after trying to update the Radio Modem !!!
Now when i try to start it, i only have the Zuk logo 1 seconde and after that he shut done and reboot. he do that 5 times and after the screen stay off and i only have the led who are on (blue or red).
When i plug the Z2 to my laptop, i can see that something is connected : qualcomm 9008 something but i can't do anything...
I have try to use adb, QFIl etc... nothing....
Any idea ???

Qfil is tricky, you must setup it first and start flashing as soon as phone connects. If you let phone in EDL mode for more than few seconds than port closes (even if it says its open). I have spent half a day with that issue.....

bricked Zuk Z2 Pro
Hello, i am new here and i have a big problem with my new Zuk Z2 Pro. I have unlocked the bootloader, installed TWRP (twrp-3.2.1-0-z2_row.img) the right way (with -i 0x2b4c in it if i am right) trough windows commands. After that i flashed a Mokee rom. Al was working well. After a week i wrote about a new version of ZUI and i flashed it. Now my Zuk is bricked. The phone will start up and then freezes in the beginning when i have to set the phone. I can get it in the menu with fastboot, recovery etc, but recovery is gone. I tried to flash a stock rom with QFIL, but my pc does not recognize my phone anymore. I don't get port 9008 and can not install TWRP anymore (waiting for device). I wrote many threads and it seems the problem is the driver. But i did install the driver (at least i think i did), and all the other needed stuff.
I know it can be fixed, but i am out of solutions. Can anyone help me out please? I hope this is the right thread to ask you, but when it's not, please guide me.
Also tried to flash the device with Mi Flash, but also the device is not recognized in this tool. At the beginning it was, but now it's not anymore.
Someone know the solution to get the phone recognized by pc and get the needed port 9008?
Do i have to use the testpoint method? Hope not, because i will have to open up the phone.
Waiting for help, thank you.
Alex