Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Hi,reboot your computer or change USB port.
Inviato dal mio ZUK Z2121 utilizzando Tapatalk
I'm having problems with Qfil ...
It is giving the following error: "download fail: FireHose Fail FHLoader Fail: Process fail"
Any answers to what might be?
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Is not your version of the recovery is wrong, what version of recovery you are using?
Hi
I have also bricked my Zuk Z2 pro after trying to update the Radio Modem !!!
Now when i try to start it, i only have the Zuk logo 1 seconde and after that he shut done and reboot. he do that 5 times and after the screen stay off and i only have the led who are on (blue or red).
When i plug the Z2 to my laptop, i can see that something is connected : qualcomm 9008 something but i can't do anything...
I have try to use adb, QFIl etc... nothing....
Any idea ???
Qfil is tricky, you must setup it first and start flashing as soon as phone connects. If you let phone in EDL mode for more than few seconds than port closes (even if it says its open). I have spent half a day with that issue.....
bricked Zuk Z2 Pro
Hello, i am new here and i have a big problem with my new Zuk Z2 Pro. I have unlocked the bootloader, installed TWRP (twrp-3.2.1-0-z2_row.img) the right way (with -i 0x2b4c in it if i am right) trough windows commands. After that i flashed a Mokee rom. Al was working well. After a week i wrote about a new version of ZUI and i flashed it. Now my Zuk is bricked. The phone will start up and then freezes in the beginning when i have to set the phone. I can get it in the menu with fastboot, recovery etc, but recovery is gone. I tried to flash a stock rom with QFIL, but my pc does not recognize my phone anymore. I don't get port 9008 and can not install TWRP anymore (waiting for device). I wrote many threads and it seems the problem is the driver. But i did install the driver (at least i think i did), and all the other needed stuff.
I know it can be fixed, but i am out of solutions. Can anyone help me out please? I hope this is the right thread to ask you, but when it's not, please guide me.
Also tried to flash the device with Mi Flash, but also the device is not recognized in this tool. At the beginning it was, but now it's not anymore.
Someone know the solution to get the phone recognized by pc and get the needed port 9008?
Do i have to use the testpoint method? Hope not, because i will have to open up the phone.
Waiting for help, thank you.
Alex
Related
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Try to find and install drivers for qualcomm hs-usb qdloader 9008.
if you hardbrick your pc prob detect your phone as Qualcomm hs-usb qloader 9008 . Just install any MIUI rom use MiFlashTool . you can find tutorial in MIUI forum . Because i got hardbrick last week . and my phone work again after install MIUI rom .
How to solve it
gowtham300 said:
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Click to expand...
Click to collapse
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
21prods said:
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
Click to expand...
Click to collapse
fixed long time ago , but i appreciate your help and you taking time to do this for me
You are welcome. I was afraid I wouldn't be of much help to you but I thought that it was a good idea anyway to leave my experience just in case at some point it proves helpful to someone.
Hi!
I tried to flash a QFIl Rom on my Z2 Pro, because its bricked... I can enter EDL Mode (Port 908) but it always says "cannot read hellopackage" in Miflash and "Sahara: Fail" in QFIL...
I tried 4 hours now, i can cry...
Whats the problem here? Do i need another ROM?
PLS HELP!!!
Stift01 said:
Hi!
I tried to flash a QFIl Rom on my Z2 Pro, because its bricked... I can enter EDL Mode (Port 908) but it always says "cannot read hellopackage" in Miflash and "Sahara: Fail" in QFIL...
I tried 4 hours now, i can cry...
Whats the problem here? Do i need another ROM?
PLS HELP!!!
Click to expand...
Click to collapse
In QFIL you have to make sure to use short path names with no spaces. Otherwise you get that Sahara error.
That doesnt help... Its always the same error..
Stift01 said:
That doesnt help... Its always the same error..
Click to expand...
Click to collapse
Perhaps you'll find more information on ZUKFans. I can feel your pain, I bricked my ZUK Pro twice, last time it was hard-bricked. I was about to throw it into the trash (literally) but finally managed to revive it and flash a ROM via QFIL.
Which ROM are you trying to flash and where did you download it? Is it the right version for QFIL? Because there are different versions for flashing via SDFuse method.
I downloaded the tool and the ROM from androidfilehost.com! I searched for zuk z2 pro and took it from "No|Name"! (Sorry, i cannot post the link directly but its easy to find)
Both from the same...
Maybe you have a download for me which you are prefering???
I tried another QFIL Rom but it didnt work too... I made a break for two hours now, otherwise i will throw my device in the fire... think i tried it hundred of times... Maybe i forgot something, but im sure that i've done everything needed...
- device is in edl mode (tried with deepflash cable and normal usb)
-qfil installed and runed (normal and a admin)
-tried two different qfil roms
I work with win10...
Thx a lot man for your help :good::good::good:
Stift01 said:
I downloaded the tool and the ROM from androidfilehost.com! I searched for zuk z2 pro and took it from "No|Name"! (Sorry, i cannot post the link directly but its easy to find)
Both from the same...
Maybe you have a download for me which you are prefering???
I tried another QFIL Rom but it didnt work too... I made a break for two hours now, otherwise i will throw my device in the fire... think i tried it hundred of times... Maybe i forgot something, but im sure that i've done everything needed...
- device is in edl mode (tried with deepflash cable and normal usb)
-qfil installed and runed (normal and a admin)
-tried two different qfil roms
I work with win10...
Thx a lot man for your help :good::good::good:
Click to expand...
Click to collapse
Try with another PC with Windows 7. Maybe this will save you.
Stift01 said:
I downloaded the tool and the ROM from androidfilehost.com! I searched for zuk z2 pro and took it from "No|Name"! (Sorry, i cannot post the link directly but its easy to find)
Both from the same...
Maybe you have a download for me which you are prefering???
I tried another QFIL Rom but it didnt work too... I made a break for two hours now, otherwise i will throw my device in the fire... think i tried it hundred of times... Maybe i forgot something, but im sure that i've done everything needed...
- device is in edl mode (tried with deepflash cable and normal usb)
-qfil installed and runed (normal and a admin)
-tried two different qfil roms
I work with win10...
Thx a lot man for your help :good::good::good:
Click to expand...
Click to collapse
If your phone is bricked make sure you flash 1.9 which basically resets everything. That worked for me. And make sure if on Win10 to turn off driver verification or whatever it is called.
Dont worry. If QFIL detects your phone as a qualcomm device its ok. Try the roms below. Make sure that you unzip the files in a c:/folder.
Here is a tutorial: http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/#post-624
QFIL rom:
https://drive.google.com/open?id=0Bz_ewncbv3n9Z1NuRFlKdjJxREk
https://drive.google.com/open?id=0Bz_ewncbv3n9NVcteTBsUHdCV2s
Try updating the firmware to 1.9 and make sure the folder that you extract the files to is renamed to a shorter name like a single alphabet. Also make sure your drive isnt bitlocked, Make sure you right click on all the extracted files and select properties and uncheck readonly . Use a different USB port and the stock cable. Run the qfil program as an administrator. Sorry if you have already tried these steps, Just that I had faced the issue and had to go through the above mentioned steps.
I buy this phone from Tinydeal and come some custom rom with out ota update. I use sdfuse to update but something goes wrong. Now its stuck ZUK logo
Be for update i forget to setup phone usb debuggin mode. Can some one help me ?
this is a common problem and it was discussed here several times, just search for it. you need to flash a full qfil rom with the qualcomm flashing tool and there are howto's here and on zukfans*eu
I dit but no luck..
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
virusib said:
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
Click to expand...
Click to collapse
When you flash zui rom with qfil it restart automatically . What about your power button ? Everything was ok before that ?
How to move from edl to fastboot
Look this
youtube.com/watch?v=2m44xKog-dI
I've used this tutorial several times.
Try it, too.
It's safe
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
virusib said:
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
Click to expand...
Click to collapse
How can a broken port ( or do u say all ports?) recognize the phone with 9008, but is unable to flash?
They apparently work, but the copy of the files don't finish 100% in qfil app, I had Sahara error, but when I tried in the computer of my cousin, everything worked ok and I could make the installation of the stock room by qfil normally.
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
lelele5 said:
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
Click to expand...
Click to collapse
try flashing stock rom
Thank you for the reply. Will get back to you as soon as I get an answer from him.
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Your friend need to do Flash Point
Ask him to google "How to flash a qualcomm soc with qpst via com port". I'm sure he'd find a lot of videos on youtube guiding through the entire process. Also tell him to keep the stock fastboot rom downloaded, coz he'll be needing that.
Flashing a wrong rom destroyed the partition table of his device. If he cant fix it himself, tell him to visit a nearby service centre. He'll get the device back in a few days or so.
lelele5 said:
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Click to expand...
Click to collapse
all is fine ...
he can flash it in miflash in edl mode
if computer can see the 9008 com port he is already in edl
the error with hello packets is because he waits too long to start flashing ..he needs to unplug phone then when he plugs it in he must have everything prepared then press flash quickly
he can wait for battery to run out of charge ...then prepare miflash ...then plug in phome ...the EXACt moment it wakes press flash
then it will work
Thanks a lot for your time and help everyone. He got frustrated and sent it to a service center. I couldn't convince him. It works fine now, though.