I buy this phone from Tinydeal and come some custom rom with out ota update. I use sdfuse to update but something goes wrong. Now its stuck ZUK logo
Be for update i forget to setup phone usb debuggin mode. Can some one help me ?
this is a common problem and it was discussed here several times, just search for it. you need to flash a full qfil rom with the qualcomm flashing tool and there are howto's here and on zukfans*eu
I dit but no luck..
Related
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Try to find and install drivers for qualcomm hs-usb qdloader 9008.
if you hardbrick your pc prob detect your phone as Qualcomm hs-usb qloader 9008 . Just install any MIUI rom use MiFlashTool . you can find tutorial in MIUI forum . Because i got hardbrick last week . and my phone work again after install MIUI rom .
How to solve it
gowtham300 said:
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Click to expand...
Click to collapse
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
21prods said:
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
Click to expand...
Click to collapse
fixed long time ago , but i appreciate your help and you taking time to do this for me
You are welcome. I was afraid I wouldn't be of much help to you but I thought that it was a good idea anyway to leave my experience just in case at some point it proves helpful to someone.
I'm new to this forum, just throwing that out, so if I don't specify something, please let me know.
So, I have a Doogee x5 (not my main phone, recently bought a new one, so this one is just for stuff) that I softly-bricked via the kingroot app, since I was trying out this app before using it on my main phone. Now, why would I do that? My main phone is doogee shoot 2 which has a very annoying bloatware that opens the browser randomly. I did a little bit of searching, and turns out it was a system app. So naturally, I searched how to get rid of it, and saw that there was only a single answer: rooting the device. Now, I'm not an expert with this, so I searched for basic and simple solutions. I decided to try the method on my side-phone first, and thank god I did that.
Now, the Doogee X5 is stuck in a boot-loop, it does boot in recovery mode, it won't update or flash new ROMs (via "install updates from SD card") since for some reason, the installation is always aborted, and I don't know what to do next....
Would be glad for any help!
Thanks in advance, Raph/
Raphaeloper said:
I'm new to this forum, just throwing that out, so if I don't specify something, please let me know.
So, I have a Doogee x5 (not my main phone, recently bought a new one, so this one is just for stuff) that I softly-bricked via the kingroot app, since I was trying out this app before using it on my main phone. Now, why would I do that? My main phone is doogee shoot 2 which has a very annoying bloatware that opens the browser randomly. I did a little bit of searching, and turns out it was a system app. So naturally, I searched how to get rid of it, and saw that there was only a single answer: rooting the device. Now, I'm not an expert with this, so I searched for basic and simple solutions. I decided to try the method on my side-phone first, and thank god I did that.
Now, the Doogee X5 is stuck in a boot-loop, it does boot in recovery mode, it won't update or flash new ROMs (via "install updates from SD card") since for some reason, the installation is always aborted, and I don't know what to do next....
Would be glad for any help!
Thanks in advance, Raph/
Click to expand...
Click to collapse
Nobody is aware of any solution?
Have you tried flashing Official ROM via SP FLASH TOOL
perhaps that should be successful
That requires (if you already know this then skip it):
- doogee X5 preloader drivers (and by that I mean MediaTek MT6580 preloader drivers, or something like MediaTek MT65xx preloader drivers)
- SP Flash tool
- PC with Windows, and USB cable to connect it
- Official Doogee X5 ROM
And also, you should have some instructions how to connect it when flashing. On my doogee device (not X5) was something like, Click download in SP Flash Tool + Power + Volume Up + connect it to pc
zicmortal said:
Have you tried flashing Official ROM via SP FLASH TOOL
perhaps that should be successful
That requires (if you already know this then skip it):
- doogee X5 preloader drivers (and by that I mean MediaTek MT6580 preloader drivers, or something like MediaTek MT65xx preloader drivers)
- SP Flash tool
- PC with Windows, and USB cable to connect it
- Official Doogee X5 ROM
And also, you should have some instructions how to connect it when flashing. On my doogee device (not X5) was something like, Click download in SP Flash Tool + Power + Volume Up + connect it to pc
Click to expand...
Click to collapse
I've tried it, but the phone isn't detected by the PC, and I'm pretty sure I installed the preloader driver correctly...
Raphaeloper said:
I've tried it, but the phone isn't detected by the PC, and I'm pretty sure I installed the preloader driver correctly...
Click to expand...
Click to collapse
This happened to me once (same device) , try flashing a stock rom in SPFLASHTOOL (that you're sure that works) while pressing volume up button (usually it takes more than 15 secs of pressing for device to get detected), don't stop pressing it, then it will enter to META mode, a MTK brick-fixing mode integrated in DOOGEE X5, just while you press that volume up button, device should come to life for long enough to flash a stock working rom to it, don't stop pressing while rom is fully flashed
sorry bad english
hope it helps
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Have you installed Lenovo's USB drivers?
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi install USB driver properly not regular driver search how root k3 on xda at this thread you got USB driver link go head or follow proper step on xda. If solution not work again let me know then I gave next procesed. T thank first you don't worry if you're phone boot .
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi mate..
Don't worry if your phone is stuck in a boot loop. Remove the battery, put it back again and connect your phone to PC with the SP tool loaded with TWRP in download(connect phone after clicking download button). This should install recovery on your phone. In case if this does not work, try other methods over the internet.
If any of the methods don't work, then download a stock ROM from needrom and flash it using SP flash tool. Note that this will erase the data stored in nvram (imei, mac, s/n). I assume that u have taken a backup before. Please do consider this as ur last step if anything does not work
Thanks and good luck...
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Hi,reboot your computer or change USB port.
Inviato dal mio ZUK Z2121 utilizzando Tapatalk
I'm having problems with Qfil ...
It is giving the following error: "download fail: FireHose Fail FHLoader Fail: Process fail"
Any answers to what might be?
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Is not your version of the recovery is wrong, what version of recovery you are using?
Hi
I have also bricked my Zuk Z2 pro after trying to update the Radio Modem !!!
Now when i try to start it, i only have the Zuk logo 1 seconde and after that he shut done and reboot. he do that 5 times and after the screen stay off and i only have the led who are on (blue or red).
When i plug the Z2 to my laptop, i can see that something is connected : qualcomm 9008 something but i can't do anything...
I have try to use adb, QFIl etc... nothing....
Any idea ???
Qfil is tricky, you must setup it first and start flashing as soon as phone connects. If you let phone in EDL mode for more than few seconds than port closes (even if it says its open). I have spent half a day with that issue.....
bricked Zuk Z2 Pro
Hello, i am new here and i have a big problem with my new Zuk Z2 Pro. I have unlocked the bootloader, installed TWRP (twrp-3.2.1-0-z2_row.img) the right way (with -i 0x2b4c in it if i am right) trough windows commands. After that i flashed a Mokee rom. Al was working well. After a week i wrote about a new version of ZUI and i flashed it. Now my Zuk is bricked. The phone will start up and then freezes in the beginning when i have to set the phone. I can get it in the menu with fastboot, recovery etc, but recovery is gone. I tried to flash a stock rom with QFIL, but my pc does not recognize my phone anymore. I don't get port 9008 and can not install TWRP anymore (waiting for device). I wrote many threads and it seems the problem is the driver. But i did install the driver (at least i think i did), and all the other needed stuff.
I know it can be fixed, but i am out of solutions. Can anyone help me out please? I hope this is the right thread to ask you, but when it's not, please guide me.
Also tried to flash the device with Mi Flash, but also the device is not recognized in this tool. At the beginning it was, but now it's not anymore.
Someone know the solution to get the phone recognized by pc and get the needed port 9008?
Do i have to use the testpoint method? Hope not, because i will have to open up the phone.
Waiting for help, thank you.
Alex
Hii! ^^ Yesterday I tried to root my Mi A2, but it screwed up my phone. Then, today I tried to flash the stock rom into my phone with miflash. The thing is that it stucked at 100%, so I searched on Google. I found a java program that worked for many people, so I wanted to try it. When I was ready to open the program, I closed miflash. And now my pc won't detect the phone both on the Android One logo and fastboot mode. What can I do?