Hi All,
Could you please help me how could i increase sound level in my honor 3c stock rom without any need to install a custom rom because it get very low sound level.
Thanks. :good:
Mahmoud_Tawfeek said:
Hi All,
Could you please help me how could i increase sound level in my honor 3c stock rom without any need to install a custom rom because it get very low sound level.
Thanks. :good:
Click to expand...
Click to collapse
Use volume booster from playstore
krispy321 said:
Use volume booster from playstore
Click to expand...
Click to collapse
Thanks, but is it give certain result???
Mahmoud_Tawfeek said:
Thanks, but is it give certain result???
Click to expand...
Click to collapse
Yes it does
Thanks bro
U can get much sound without root. We need to edit a file in /system/etc/mixer_xx.xml
gopinaidu77 said:
U can get much sound without root. We need to edit a file in /system/etc/mixer_xx.xml
Click to expand...
Click to collapse
This one requires root. Kindly have some precautions before going through this
Thanks
Mahmoud_Tawfeek said:
Thanks
Click to expand...
Click to collapse
Or alternatively, you can install ARISE sound mod. V4A paired with Dolby Atmos makes the sound go BOOM.
Sent from my Honor 8 using XDA Labs
i have uploaded sound patch you should flash that
---------- Post added at 06:04 PM ---------- Previous post was at 05:48 PM ----------
yes by flashing sound patch
Related
Hello Guys!
After updating to lollipop I felt the sound too low for my daily Usage,
As Xloud And Clearphase is removed now.
So I Played Around and boosted the Speakers And Headphone Volume!
Here You Go:-
https://app.box.com/s/xu6h0vdde3c802mkkvf4y6l4xejlmcv8
More Loud:- (Flash at your own risk)
https://app.box.com/s/ei3dk231gyc4el6pxdgeon5pi7hc8y4s
Mirrors:-
https://www.dropbox.com/sh/9y548jo1hl4nmwz/AACq7WxxINq_AdoSfJG9cp2ga?dl=0
Note:- Root is Required!
To get back to Stock Sound Backup Files From
System/etc/snd_soc_msm
Flashable Zip works For both 5.0 and 5.1
Njoy!
This is like the Xtreme-Xloud.zip for 4.4.4? :fingers-crossed:
RyomaEchizen said:
This is like the Xtreme-Xloud.zip for 4.4.4? :fingers-crossed:
Click to expand...
Click to collapse
It just increases sound volume as xloud does in 4.4.4
Done . It's working great
I assumed this is usable on Zl (6502) too?
Edit: Nvm, Just saw your thread on ZL.
KobySam87 said:
Done . It's working great
Click to expand...
Click to collapse
which one you used ???
Have you boosted the ADC volume or digital amplification? I couldn't find the former, in lollipop unlike KitKat, but if you did the later then I prefer quality over loudness corruption
Sent via Tapatalk on my Xperia Z
SonyRiFle said:
Hello Guys!
After updating to lollipop I felt the sound too low for my daily Usage,
As Xloud And Clearphase is removed now.
So I Played Around and boosted the Speakers And Headphone Volume!
Here You Go:-
https://app.box.com/s/xu6h0vdde3c802mkkvf4y6l4xejlmcv8
More Loud:- (Flash at your own risk)
https://app.box.com/s/ei3dk231gyc4el6pxdgeon5pi7hc8y4s
Note:- Root is Required!
Its Flashable but recovery is not yet available so u can manually push it to
System/etc/snd_soc_msm
If you think of reverting to stock do take a backup of Your original File!
Njoy!
Click to expand...
Click to collapse
Good work mate!:good::laugh:
CosmicDan said:
Have you boosted the ADC volume or digital amplification? I couldn't find the former, in lollipop unlike KitKat, but if you did the later then I prefer quality over loudness corruption
Sent via Tapatalk on my Xperia Z
Click to expand...
Click to collapse
D first one is just a increased ADC volume...which gives u more loud dan stock one but quality sound also...second one is too loud whch myt crackle ur speakers in full volume instead u can use it in 12-13 level volume for better sound
yashkadam0012 said:
which one you used ???
Click to expand...
Click to collapse
I don't get you. How do you mean?
i'm a noob at this, how to manually push the 1st file?
i thought it would be just one file inside the zip but ...it's more
any help is appreciated
You can push folders, just make sure the source and destination are the same directory in the tree.
Sent via Tapatalk on my Xperia Z
I've replaced the old file with the new and reboot, now my phone is in bootloop, what happened??? :crying::crying::crying:
well m8 , my problem is bigger than that
i don't actually know how to Push the folder...what program to use ...etc , is there a tutorial on the forums somewhere about that.
i appreciate you reply
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
enigma6686 said:
I've replaced the old file with the new and reboot, now my phone is in bootloop, what happened??? :crying::crying::crying:
Click to expand...
Click to collapse
when i was on KK i had a similar problem with another mod , and the only solution for it was to reflash ...unfortunately
enigma6686 said:
I've replaced the old file with the new and reboot, now my phone is in bootloop, what happened??? :crying::crying::crying:
Click to expand...
Click to collapse
Permissions?
Rw-r--r--
Flash zip work fine
comax70 said:
Flash zip work fine
Click to expand...
Click to collapse
without recovery?
EmeraldTimer said:
without recovery?
Click to expand...
Click to collapse
With recovery flash and reboot
comax70 said:
With recovery flash and reboot
Click to expand...
Click to collapse
5.0 still havent a recovery, am I wrong?
EmeraldTimer said:
5.0 still havent a recovery, am I wrong?
Click to expand...
Click to collapse
Yes i have 5.0 whit twrp and root
Viper4Android for Android Nougat is out but after installing it I realized that MusicFX is still present in my ROM and V4A is not working inside all apps.
So I have created this simple Viper4Android Cleaner script to take care of that.
I have tested this on all Nougat ROM available right now and it's working very well. The script will remove MusicFX, AudioFX, SoundFX or DSPManager.
Also in order to make V4A working inside any app, audio_effects.conf and audio_policy.conf needed to be replaced.
In short all you need to do is flash it in TWRP before or after V4A installation.After when you boot up there is no need to update driver anymore.
It's all done, just turn that switch ON in V4A app and enjoy your favorite tunes.
ViPER4Android_2.5.0.5_guitardedhero.zip can be found here.
Nice, good job!
v1.3 is out, some little script cleaning...
Emilius said:
Viper4Android for Android Nougat is out but after installing it I realized that MusicFX is still present in my ROM and V4A is not working inside all apps.
So I have created this simple Viper4Android Cleaner script to take care of that.
I have tested this on all Nougat ROM available right now and it's working very well. The script will remove MusicFX, AudioFX, SoundFX or DSPManager.
Also in order to make V4A working inside any app, audio_effects.conf and audio_policy.conf needed to be replaced.
In short all you need to do is flash it in TWRP before or after V4A installation.After when you boot up there is no need to update driver anymore.
It's all done, just turn that switch ON in V4A app and enjoy your favorite tunes.
ViPER4Android_2.5.0.5_guitardedhero.zip can be found here.
Click to expand...
Click to collapse
??????
xiabai said:
??????
Click to expand...
Click to collapse
???????
xiabai said:
??????
Click to expand...
Click to collapse
Emilius said:
???????
Click to expand...
Click to collapse
?????????
raptoro07 said:
?????????
Click to expand...
Click to collapse
LOL
I heard about the Viper recently just 2 days ago..I just rooted my phone nexus 6 yesterday..Can anyone explain me how to install the Viper4android in my nexus 6 with detailed steps if possible..thank you so much in advance..
suprithh18 said:
I heard about the Viper recently just 2 days ago..I just rooted my phone nexus 6 yesterday..Can anyone explain me how to install the Viper4android in my nexus 6 with detailed steps if possible..thank you so much in advance..
Click to expand...
Click to collapse
1. Grap ViPER4Android_2.5.0.5_guitardedhero.zip and Viper4Android Cleaner from first post
2. boot in TWRP
3. Flash Viper4Android Cleaner
4. Flash ViPER4Android_2.5.0.5_guitardedhero
5. Reboot
6. Open Viper app and turn it ON
Emilius said:
1. Grap ViPER4Android_2.5.0.5_guitardedhero.zip and Viper4Android Cleaner from first post
2. boot in TWRP
3. Flash Viper4Android Cleaner
4. Flash ViPER4Android_2.5.0.5_guitardedhero
5. Reboot
6. Open Viper app and turn it ON
Click to expand...
Click to collapse
Thank you so much..worked perfectly..Is there any setting I have to do after doing this steps..or I can use it just after reboot..
suprithh18 said:
Thank you so much..worked perfectly..Is there any setting I have to do after doing this steps..or I can use it just after reboot..
Click to expand...
Click to collapse
In the Viper app there is a lot of options to play. You will need some time to set it up but once you are happy with results you can save your profile so next time you don't need to do it again.
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Emilius said:
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Click to expand...
Click to collapse
Sure, Thank you
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
suprithh18 said:
Sure, Thank you
Click to expand...
Click to collapse
I didnt find any profile in first post. Can you please post it here.
suprithh18 said:
Sure, Thank you
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
I didnt find any profile in first post. Can you please post it here.
Click to expand...
Click to collapse
My Viper Profile
Emilius said:
My Viper Profile
Click to expand...
Click to collapse
Loaded..Thank you so much..
Just wanted to say thanks to the OP. First time in a long time I've been able to get V4A working on my N6!!
Everything works flawlessly!
usafle said:
Just wanted to say thanks to the OP. First time in a long time I've been able to get V4A working on my N6!!
Everything works flawlessly!
Click to expand...
Click to collapse
Happy to hear that
Emilius said:
Happy to hear that
Click to expand...
Click to collapse
Hi mate, this script also uninstalls ViPERAtmos? Do you think it works in N5X? Thanks
panamera2011 said:
Hi mate, this script also uninstalls ViPERAtmos? Do you think it works in N5X? Thanks
Click to expand...
Click to collapse
No, the script will not remove old versions of viper or any other viper combinations. There is just to many files for me to track. This is meant to be for fresh ROM installations, to remove default effects and make ROM ready for V4A.
N5X should be okay but I don't have that device so I can not test it.
Emilius said:
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Click to expand...
Click to collapse
Thanks you very much! Worked like a charm. Bluetooth profile didn't load but the others did no problem. No big deal. But thanks again!
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
Flash the attached Magisk module (v4afx_v1.7.3.zip) through Magisk Manager and press volume up button twice.
After that reboot your device and enter the Viper4Android app.
Next, you need to set up the sound mod.
*I only use Viper4Android for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Android's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi Note 5 Pro are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.zip into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
pavaosk said:
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Arise. Simple to use, great sound quality and a lot of customization.
There are many Arise editions but I find the attached one simplest to use.
Steps:
1. Flash the attached file (ARISE Sound Systems Deuteronomy 2.2.3 Mac 'n Cheese Edition FINAL) through TWRP
2. Reboot to OS
3. Install Busybox (https://play.google.com/store/apps/details?id=ru.meefik.busybox) from Play Store
4. Open the Busybox app and install busybox
5. Enter the Viper4Arise app
Done!
Next, you need to set up the sound mod.
*I only use Viper4Arise for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Arise's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi 4X are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.rar into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
Click to expand...
Click to collapse
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Incomtus said:
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Click to expand...
Click to collapse
Which rom?
pavaosk said:
Which rom?
Click to expand...
Click to collapse
ViperOs bro
Incomtus said:
ViperOs bro
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
pavaosk said:
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
Click to expand...
Click to collapse
Already done! Lol
Incomtus said:
Already done! Lol
Click to expand...
Click to collapse
Have you tried installing the Viper4Andoid FX module through Magisk?
pavaosk said:
Have you tried installing the Viper4Andoid FX module through Magisk?
Click to expand...
Click to collapse
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Incomtus said:
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Click to expand...
Click to collapse
First one, that says only Viper4Android FX and in description says v2.2 2.5.0.5
OK i tried to install the Viper4Andoid with magisk and now i have 2 versions installed and the one installed with magisk is just craching
---------- Post added at 10:38 PM ---------- Previous post was at 10:04 PM ----------
How can i unistall the first Viper4Andoid you gave? Lol i think i give up
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Incomtus said:
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Click to expand...
Click to collapse
I'm glad I've helped
pls answer ...
When I try to use on MIUI 9 Global ROM ?? it's will works ???
k3rzZ said:
When I try to use on MIUI 9 Global ROM ?? it's will works ???
Click to expand...
Click to collapse
I believe it should work. You can try it yourself.
Good Job
Now I'm enjoying it even more ! thanks buddy :good::fingers-crossed:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
bee21 said:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
Click to expand...
Click to collapse
You can try it on MIUI I believe it should work, but even if it doesn't it won't break anything so be free to try it.
pavaosk said:
Help me please (I put this in...LOL)...
Click to expand...
Click to collapse
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
samccfl99 said:
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
Click to expand...
Click to collapse
You can try flashing these two files : http://forum.xda-developers.com/showthread.php?p=69618189
bbe.rar bad file,error while extracting pls help
Hello guys, how can i make my viper4android fx app start working when i turning on music? I'm changing some parameters, but i don't really hear any difference at all. Thanks for any help.
Best Regards,
Saimon
SCUZZY1337 said:
Hello guys, how can i make my viper4android fx app start working when i turning on music? I'm changing some parameters, but i don't really hear any difference at all. Thanks for any help.
Best Regards,
Saimon
Click to expand...
Click to collapse
Same here, uninstalled it and installed it 3 times so far and it's not working,tried with HyperX Cloud 2 and ATH M70 and no difference.
AlexMihai26 said:
Same here, uninstalled it and installed it 3 times so far and it's not working,tried with HyperX Cloud 2 and ATH M70 and no difference.
Click to expand...
Click to collapse
Viper never worked for me, never.
SCUZZY1337 said:
Viper never worked for me, never.
Click to expand...
Click to collapse
For me it worked on Emui 4.1 and 5, not on LineageOs (current rom)
---------- Post added at 02:45 PM ---------- Previous post was at 02:41 PM ----------
But the EQ in Lineage it`s good.
SCUZZY1337 said:
Hello guys, how can i make my viper4android fx app start working when i turning on music? I'm changing some parameters, but i don't really hear any difference at all. Thanks for any help.
Best Regards,
Saimon
Click to expand...
Click to collapse
What ROM are you using, if you using Elite ROM you need to enable viper fx driver in K settings
Twisted Prime said:
What ROM are you using, if you using Elite ROM you need to enable viper fx driver in K settings
Click to expand...
Click to collapse
Hello again, i'm using Samsung Galaxy S7 right now and it says that driver is not installed, but, it is...
Please share mods audio increase for j7p M variant oreo 8.1.0
Thanks in advance .
just simple man, visit this link and download the flashable zip thru recovery if you're rooted https://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
icodix said:
just simple man, visit this link and download the flashable zip thru recovery if you're rooted https://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Click to expand...
Click to collapse
j
Thanks for reply but I already did a couples of days ago . Doesnt works app crashes in my oreo 8.1.0 .
I think its not supported yet. Our devs doing it already
If you are on millennium ROM or any one with Magisk, install Viper4android from the magisk library. Just download and it will install automatically.
Just make sure you have Uninstaller app to uninstall Samsung's stock sound alive; Viper won't work with Soundalive present.
Sent from my SM-G610M using Tapatalk
ultradmx135 said:
If you are on millennium ROM or any one with Magisk, install Viper4android from the magisk library. Just download and it will install automatically.
Just make sure you have Uninstaller app to uninstall Samsung's stock sound alive; Viper won't work with Soundalive present.
Click to expand...
Click to collapse
Working but there is not a big difference scout hugh volume but sound is beautiful.
NiCaARRecho said:
Working but there is not a big difference scout hugh volume but sound is beautiful.
Click to expand...
Click to collapse
Make sure it IS working, you can have "Dolby surround and pro logic" IRS; which can make sound pretty loud.
I will try attaching it, after you have it. Go to convolver, press on IRS, it should give you error of some sort, after that copy the file in the viper4android folder in the internal memory>kernel. Boom, it should be working.
PS: I can't attach the file but Google it you may find it.
OR just turn on playback gain, you can adjust it in the settings, in which it can go as far as "extreme" gain; aka the loudest.
Sent from my SM-G610M using Tapatalk
---------- Post added at 06:13 PM ---------- Previous post was at 05:53 PM ----------
NiCaARRecho said:
Working but there is not a big difference scout hugh volume but sound is beautiful.
Click to expand...
Click to collapse
Nevermind I got a link.
Here:
https://drive.google.com/folderview?id=0BzhZFIsxQQfHVGVDNzR4ZU5lbms
Sent from my SM-G610M using Tapatalk
I cant find viper4android kernel Will u guide me in system?
NiCaARRecho said:
I cant find viper4android kernel Will u guide me in system?
Click to expand...
Click to collapse
Done! Thank you bro!