ok if someone doesnt have the latest radio the htc rom flashes it automaticly..(it just happend to me)
so when the radio flashes then could the recovery menu get flashed as well??
YES. YOU MUST go back into recovery mode (should do it automatically after flashing htc "recovery") but hold the home button after the package unloader image blinks off. Flash the cyanogen update immediately after. If you dont reboot into your custom recovery, it will boot adp1.6 and you lose your recovery image.
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
ArticK said:
Are we still get OTA after install this ROM ?
Can you explain what is work in this ROM, because when i want to unlock bootloader the button didn't work
Click to expand...
Click to collapse
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
anarchtic said:
I am not sure about OTA yet, maybe for OTA it will overwrite recovery and must do the process again.
Well before the android one rom you could not boot into recovery by holding vol + and power.
Unfortunately during the bootloader unlock process you cannot use the volume button.
Click to expand...
Click to collapse
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
ArticK said:
It is mean this ROM only resolve for boot into recovery by holding vol + and power but not for vol button when unlock bootloader process asking confirmation yes/no .
I think you should noted in OP what is work in this ROM .
Click to expand...
Click to collapse
yes your right, and I will edit
anarchtic said:
I have fixed the bug in some Android One roms that prevented you from booting into recovery.
You can now boot into recovery by holding volume + and power button.
** You can still not unlock bootloader in fastboot, volume buttons is disabled for this function **
Please download X510-A1-FIX-20150824.7z from here and extract.
Make sure you have SP Flash Tool to continue.
-------------------------------------------------
Install Android One Rom
-------------------------------------------------
1. Open SP Flash Tool and click on the Format Tab and then press the Start button.
2. Once complete disconnect your usb cable and re insert it again.
3. Click on Download tab and load the MT6580_Android_scatter.txt scatter file from the extracted archive.
4. Click the Download button.
5. Once complete you can boot as normal or proceed to install TWRP Recovery
-------------------------------------------------
Install TWRP Recovery
-------------------------------------------------
If you would like TWRP recovery installed please replace recovery.img inside the extracted folder with recovery-twrp.img before flashing.
*** Don't forget to rename recovery-twrp.img to recovery.img ***
Once the recovery.img has been replaces with the TWRP Recovery image please follow the above instructions again.
-------------------------------------------------
ROOT
-------------------------------------------------
If you would like to be rooted please boot into TWRP recovery after flashing TWRP Recovery by holding volume + and power button
Once the TWRP recovery open it will ask you if you want if you want to use TWRP as read only.
To root we need read and write access so please proceed to write to system.
Once in TWRP recovery press Reboot and then press Bootloader and then you will be prompted to install root.
Once booted into fastboot please reboot the phone.
Click to expand...
Click to collapse
Pls boss I did not understand the procedure to root..u said when we click on reboot in twrp recovery we should den press bootloader and den it will prompt us to root.
Which button do I press to for the bootloader
i installed the rom from the mentioned link above, however , now when i press volume + & power, i go into a wired recovery, an image of an open android with red exclatmation mark with no text, no choices or nothing,
the reason i wanted recovery is to flash marshmallow on my 2gb ram x510, now there is nothing any clue ?
small problems make depressed
excuse all .
I was new here . and want to learn .
I have a problem with hot android 2 me.I can not enter into TWRP menu by turning off my android , and menghidupkanya by pressing a few buttons such as Vol +/- buttons with power button . no reaction .
is there any other way? or non- root application that can go directly to TWRP .
the position of an existing room in marshmallows , I want to root my android .:angel::angel::angel:
I worked all the steps but the device does not respond and the program does not do anything happens
What is the solution device does not work
I can't download the x510 rom. When I click on the download link, it takes me to Google Drive where I find 'Empty Folder' message. Please help.
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Dragunz said:
How how boot into twrp custom recovery mode using infinix hot 4 lite, someone please help....
Click to expand...
Click to collapse
What?
http://forum.xda-developers.com/z3-compact/development/list-pre-rooted-firmwares-6-oct-2015-t3218820
Above the link there is prerooted firmwares. I want to flash 6.0.1 firmware by using flashtool but when I choose flashmode, flashtool could not see the firmware. It is in zip format. I opened and extracted the fw but nothing changed. I changed the extension to .ftf but no change occured.
How can I install firmware by using the link above?
Can you help?
How to flash
Important: Make a backup before flashing!
Download and copy the pre-rooted firmware into the micro SDcard
Reboot your phone, boot into the recovery before the phone boot into Android OS (if you knew how to do it). If you using XZDualRecovery, press VOL DOWN to boot into TWRP or VOL UP to boot into CWM after your phone vibrate twice. I recommended TWRP!
Wipe /data, /dalvik-cache, and /cache (recommended)
Open "Install ZIP" and go to the location where you copied the firmware
Boot your phone. It will take 10 minutes to boot for the first time
dddestiny said:
How to flash
Important: Make a backup before flashing!
Download and copy the pre-rooted firmware into the micro SDcard
Reboot your phone, boot into the recovery before the phone boot into Android OS (if you knew how to do it). If you using XZDualRecovery, press VOL DOWN to boot into TWRP or VOL UP to boot into CWM after your phone vibrate twice. I recommended TWRP!
Wipe /data, /dalvik-cache, and /cache (recommended)
Open "Install ZIP" and go to the location where you copied the firmware
Boot your phone. It will take 10 minutes to boot for the first time
Click to expand...
Click to collapse
I am searching how to install twrp. Sony devices are reAlly interesting. With My old Samsung device and with odin I can make everyhing. But in sony unlock bootloader, use twrp, Adb, flashtool, many many steps. I am trying to understand them.
Now I am trying to understand how to install twrp in unrooted device. Forum has many Threads but nothing is in order.
http://www.androidpolice.com/2014/10/02/unlocking-the-bootloader-on-sonys-xperia-z3-and-z3-compact-causes-poor-low-light-camera-performance-thanks-to-drm/
I'm having a bit of problem flashing my Note 5 using ODIN. Whenever I flash the stock ROM, ODIN finishes successfully but when the device boots up, it gets stuck on 'No command' and thereafter it is not possible to enter recovery mode or do anything further. I have now flashed TWRP and wiped the entire device and tried again and still, it gets stuck on 'No command'.
I am thinking that as a last resort, I may just get lucky by placing a flashable ZIP of the stock ROM onto the internal storage and install the ROM via TWRP/Recovery mode. I think I first need to get the SM-N920C stock recovery image and flash that first and thereafter flash the stock ROM from the stock recovery options.
Where can I find a stock ROM flashable zip and recovery image for my device? My device is the SM-N920C, build: N920CXXS5CRH2 XFA.
Finally, do you guys think that doing this is a waste of time since flashing with ODIN passed but resulted in the 'No command' error?
If the phone ever stops booting to DL Mode, but still enters TWRP or boots to the normal android OS.
Try flashing this zip. It might freeze TWRP after it ends flashing.
Then after the flash, flash a KDZ.
https://mega.nz/#!5lYySQ6J!LCBGUUA5YgosDAixJ_dOeUAdARxL0Q2dSvr3ll7u3Dg
Thanks to @-gloim- for giving the file