Hey, anybody here use Naptime and possibly want to share your experiences with it? Also which settings you've used? Thanks!
I still can't figure it out that after my screen locked for awhile, then my fingerprint sensor not working only until I press the power button.
Is there some way to disable the brightness change when unlocking? I read the faq in the App and it says it does it to fix auto brightness but since I dont use auto brightness at all I wish I could disable this effect
cheeziz said:
I still can't figure it out that after my screen locked for awhile, then my fingerprint sensor not working only until I press the power button.
Click to expand...
Click to collapse
I had same issue, try disabling pocket mode in settings,.... You will have working finger print sensor
cheeziz said:
I still can't figure it out that after my screen locked for awhile, then my fingerprint sensor not working only until I press the power button.
Click to expand...
Click to collapse
Don't disable motion detection and your fingerprint sensor will work fine.
any good advanced settings for Naptime (without aggressive doze)?
I mean for light doze, deep doze ......
My device OnePlus 3T (7.1.1)
Thanks
Related
How do you lock the screen during a call?
Is there a setting where the screen will automatically lock while I am on the phone?
amot said:
How do you lock the screen during a call?
Is there a setting where the screen will automatically lock while I am on the phone?
Click to expand...
Click to collapse
search the market for "procsimity sensor" that does it automatically. there are a few bugs that need to be worked out with it becuase it uses the light sensor it doesnt work real well in the dark but from what I have seem other than that its a pretty good app.
wtphoto said:
search the market for "procsimity sensor" that does it automatically. there are a few bugs that need to be worked out with it becuase it uses the light sensor it doesnt work real well in the dark but from what I have seem other than that its a pretty good app.
Click to expand...
Click to collapse
I uninstalled it because I hate auto backlight. It stays dim even when browsing.
chococrazy said:
I uninstalled it because I hate auto backlight. It stays dim even when browsing.
Click to expand...
Click to collapse
i personally dont use it but thought he might want it
The lock replacement app, LockBot Pro, as a setting to lock the screen during a call. Not sure about the free version but it's worth a dollar or two.
amot said:
How do you lock the screen during a call?
Is there a setting where the screen will automatically lock while I am on the phone?
Click to expand...
Click to collapse
The screen does automatically lock. The timeout is adjustable, but I don't think there's anything in the Settings menu for it.
I use a program called Quick Settings that puts a shortcut on my home screen to a list of modes - each mode can include custom screen timeout values, ringer volumes, etc. One of them is in-call screen timeout.
OK now, I have tried them all now:
Quick Settings
Call Light
Call Daddy
Lockbot
Proximity Sensor
Screebl
Power Manager
and I still can't figure out how to time out the screen duing a call. It's driving me nuts because I hang up on people all the time. Why can't I get any of the above to work on fresh 1.1 + Gumbo kernel?
For all the people out there on a Sprint Hero, what app are you using and what are your settings in Settings> Sound & display> Disable auto backlight and your screen timeout settings.
TIA.
I'm in the same boot and wish I could find an answer. Sprint really screwed up not putting a proximity sensor on the phone.
I have tried "Proximity Sensor" app but it's buggy and I don't like using auto brightness. Just tried "Quick Settings" but can not find any adjustment for time out during call? only the general screen time out.
Does anyone know where this setting is? Could it be only for 1.6 and up?
bubi73 said:
OK now, I have tried them all now:
Quick Settings
Call Light
Call Daddy
Lockbot
Proximity Sensor
Screebl
Power Manager
and I still can't figure out how to time out the screen duing a call. It's driving me nuts because I hang up on people all the time. Why can't I get any of the above to work on fresh 1.1 + Gumbo kernel?
For all the people out there on a Sprint Hero, what app are you using and what are your settings in Settings> Sound & display> Disable auto backlight and your screen timeout settings.
TIA.
Click to expand...
Click to collapse
In Power Manager, it's under "Stay Awake" and it's called "During Call."
jonnythan said:
In Power Manager, it's under "Stay Awake" and it's called "During Call."
Click to expand...
Click to collapse
jonnythan,
I tried that and it doesn't work for me for some reason. I have diabled auto backlight and my screen timeout is set to 30 sec. What are your settings? Also with Power Manager how long does it take to time out?
bubi73 said:
jonnythan,
I tried that and it doesn't work for me for some reason. I have diabled auto backlight and my screen timeout is set to 30 sec. What are your settings? Also with Power Manager how long does it take to time out?
Click to expand...
Click to collapse
I have different settings for different situations. I have it set to 10 seconds while on battery and 1 minute while on AC power. Works fine for me.
bubi73 said:
and I still can't figure out how to time out the screen duing a call. It's driving me nuts because I hang up on people all the time. Why can't I get any of the above to work on fresh 1.1 + Gumbo kernel?
For all the people out there on a Sprint Hero, what app are you using and what are your settings in Settings> Sound & display> Disable auto backlight and your screen timeout settings.
TIA.
Click to expand...
Click to collapse
Ever since I switched to a custom kernel, lock during a call has been temperamental. I'm using Gumbo's rom/kernel. For some reason it started working again today. Last night I did switch back to the stock mem kill settings, but I doubt this had anything to with fixing it. Sorry this post is of no help, I just wanted to let you know you're not alone.
Check out the Screen Suite app...
The Screen Suite app is a collection of screen utilities. Features a lock screen that can be configured to lock during a call and has a panel to lock your screen on demand.
proximity sensor works pretty well for me and i dont have auto back light enabled...
im running damage 2.0.7.2
screen suite doesn't disable the notification bar, my ear pulls it down sometimes. i have things in there that launch.
This thread has the "end all" solution which you can just flash to your phone. It removes the "End Call" button from the screen when you're on a call so that you can't do any facial hang ups.
http://forum.xda-developers.com/showthread.php?t=672034
Hello,
when i call, the screen became black because of proximity sensor. when i took of the phone from my ears.... the screen don't turn on. if i puh the sensor with my fingers.. many and many times sometime it turn on..
i've a protector on screen but isn't on the sensor..
gattobau said:
Hello,
when i call, the screen became black because of proximity sensor. when i took of the phone from my ears.... the screen don't turn on. if i puh the sensor with my fingers.. many and many times sometime it turn on..
i've a protector on screen but isn't on the sensor..
Click to expand...
Click to collapse
Yea this happens to me too. I just use Hardware Disabler to stop the proximity driver. So the screen never turns off in a call until the screen time out. And you can turn it back on by pressing the power button. Keep in mind though, that app makes the phone laggy...it's annoying at times, but less annoying then waiting on people to hang up or leaving them a long voicemail when they don't pick up
Turn on the proximity sensor
The proximity sensor on V20a is disabled by default. you can enable it by going into the secret menu and your problem will be solved.
Dial 3845#*880# ---->Device Test ---->All Auto Test Menu-Full --->ALC/Proximity Test --->Enable the proximity sensor here
Done
mahendrabiradar said:
The proximity sensor on V20a is disabled by default. you can enable it by going into the secret menu and your problem will be solved.
Dial 3845#*880# ---->Device Test ---->All Auto Test Menu-Full --->ALC/Proximity Test --->Enable the proximity sensor here
Done
Click to expand...
Click to collapse
Omg thank you!! lol i was doing it the hard way haha
let's try! thanks
Strange. It works properly in my case for JB. I never activated it in hidden menu. Anyways thanks for the info.
ynkamat said:
Strange. It works properly in my case for JB. I never activated it in hidden menu. Anyways thanks for the info.
Click to expand...
Click to collapse
Same ! and indeed really strange
i've had the same problem. it sometimes happens, sometimes doesn't. no change after i enabled it in secret menu, still unreliable.
I installed a couple of apps for this, like Smart cover https://play.google.com/store/apps/details?id=smart.cover, and Proximity Smart Cover https://play.google.com/store/apps/details?id=com.danielling.proximitysmartcover . Basically I want when the proximity is covered (case closed), the screen goes off, and then goes on when it's uncovered. These 2 apps can do the 'wake' part alright (wake screen when the proximity is no longer covered) but they can't seem to turn off the screen when it's covered. I granted both admin permission. Here are some clues:
_ My proximity sensor is working alright (checked through hidden menu, and it does turn off the screen when proximity covered in-call)
_ Tap tap app can work (touch/wave 2x to lock, same to wake)
So any idea why those 2 app can't work? Thanks in advance.
I use Smart Screen on my Note II with the following settings:
Basic - everything blank (no ticks in the boxes}
Prox - Blank
Sensor - Blank
Start/Stop - Disable in landscape
This works for me and I have not noticed any battery drainage problems.
Please note: I have stock 4.1.2 and no lock screen enabled (my phone never leaves my sider.
This is not my ideal setup as the screen will immediately sleep if i hapren to accidently go to close. I need to pull down the notification menu at the far left or right of the screen. I have tried to play with the delayed reaction settingsand have had contact with the developer about the situation.
I am however happiest that as soon as i open my wallet case the phone is ready for use.
Quick and easy with one hand
Master619 said:
I installed a couple of apps for this, like Smart cover https://play.google.com/store/apps/details?id=smart.cover, and Proximity Smart Cover https://play.google.com/store/apps/details?id=com.danielling.proximitysmartcover . Basically I want when the proximity is covered (case closed), the screen goes off, and then goes on when it's uncovered. These 2 apps can do the 'wake' part alright (wake screen when the proximity is no longer covered) but they can't seem to turn off the screen when it's covered. I granted both admin permission. Here are some clues:
_ My proximity sensor is working alright (checked through hidden menu, and it does turn off the screen when proximity covered in-call)
_ Tap tap app can work (touch/wave 2x to lock, same to wake)
So any idea why those 2 app can't work? Thanks in advance.
Click to expand...
Click to collapse
try to re-calibrate proximity sensor in hidden menu just in case. i had some issues with it turning on & off the screen in-call, re-calibration fixed it.
Flying_Bear said:
try to re-calibrate proximity sensor in hidden menu just in case. i had some issues with it turning on & off the screen in-call, re-calibration fixed it.
Click to expand...
Click to collapse
calibrate proximity sensor in hidden menu???
Sent from my LG-P880 using xda premium
Flying_Bear said:
try to re-calibrate proximity sensor in hidden menu just in case. i had some issues with it turning on & off the screen in-call, re-calibration fixed it.
Click to expand...
Click to collapse
Tried calibrating both in hidden menu and in app, but still there. But using another app, Smart screen off pro, fixed it. Guess it has to be with a different mechanism.
not proximity sensor
I have had the same problem on my 4X but the problem isn't the proximity sensor. I have tried various other apps including orientation and brightness locks. These haven't worked either, I have tried to change lock screen settings and screen time out but these haven't worked. Does anyone have any other suggestions or solutions to this problem?
I use "smart screen off pro" with no problems, all is working as expected....
Bogeyof said:
I use "smart screen off pro" with no problems, all is working as expected....
Click to expand...
Click to collapse
what lock screen, brightness and permissions settings do you have on your phone other than what is changed within the app?
geronphillips said:
what lock screen, brightness and permissions settings do you have on your phone other than what is changed within the app?
Click to expand...
Click to collapse
OK, I dont use a lock screen, never tested if its working...
My settings (checked):
Basic:
- Start on Boot
- Hide notification messages
Start/Stop
- Disable when in Landscape
- Enable only when in Launcher (not necessary, if u want it allways to turn screen off leave unchecked, I want Screen on in Apps, so I checked it)
Vibration:
- Vibrate when screen turned off
Thats all...
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
Click to expand...
Click to collapse
Because Blu cust support has not duplicated it, others with update didn't duplicate it.
Makes it seem like just your phone.
Did you try to factory reset it.
Fully. Remove saved fingerprint remove accounts,
Reboot to recovery and do factory reset. Setup phone again
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
Click to expand...
Click to collapse
Late reply I know but I found out how to disable this option.
In the settings go to:
Display->Ambient Display
Turn off the option for New Notifications.
I have no idea why it is called this as new notifications (SMS at least from my quick test) still wake the screen,but the fingerprint sensor no longer shows when you lift or move your phone. Completely mislabeled but hey at least you can turn it off.
Anyone else having this issue? I have to either tap phone or tap power button to get screen to turn on, then face unlock will work. Previously I would be able to just hold it up to my face with screen off and it would just unlock. After most recent update it no longer does this. Very frustrating.
Check maybe lift to wake phone is turned off in the settings.
cwburns32 said:
Anyone else having this issue? I have to either tap phone or tap power button to get screen to turn on, then face unlock will work. Previously I would be able to just hold it up to my face with screen off and it would just unlock. After most recent update it no longer does this. Very frustrating.
Click to expand...
Click to collapse
Mine was doing that too...along with auto brightness stuck and the proximity sensor wasn't turning the screen on and off during calls. As a last resort before sending it back (since I had to wipe it anyway) I tried the first android 11 beta (not 1.5). It almost completely fixed everything but the proximity sensor. Still had to occasionally tap the phone or power it on to face unlock though. Google replaced it because of the proximity sensor. The replacement phone is working fine on latest update of 10
redskykiter said:
Mine was doing that too...along with auto brightness stuck and the proximity sensor wasn't turning the screen on and off during calls. As a last resort before sending it back (since I had to wipe it anyway) I tried the first android 11 beta (not 1.5). It almost completely fixed everything but the proximity sensor. Still had to occasionally tap the phone or power it on to face unlock though. Google replaced it because of the proximity sensor. The replacement phone is working fine on latest update of 10
Click to expand...
Click to collapse
Good to know. Haven't wiped just yet, may do what you did there.
cwburns32 said:
Good to know. Haven't wiped just yet, may do what you did there.
Click to expand...
Click to collapse
I really didn't have ANY bugs that I found with beta 1....read 1.5 has some issues. Is your proximity sensor working? I used androsensor to confirm
edit I did wipe face data before erasing
redskykiter said:
I really didn't have ANY bugs that I found with beta 1....read 1.5 has some issues. Is your proximity sensor working? I used androsensor to confirm
Click to expand...
Click to collapse
My prox sensor is working fine. It just won't face unlock with screen off. Turned on lift to check phone and now screen wakes without me having to do anything but still, there was a time where I had that feature off and face unlock would unlock with screen off
cwburns32 said:
My prox sensor is working fine. It just won't face unlock with screen off. Turned on lift to check phone and now screen wakes without me having to do anything but still, there was a time where I had that feature off and face unlock would unlock with screen off
Click to expand...
Click to collapse
I never had lift to wake off. That sounds like a solution to me
redskykiter said:
I never had lift to wake off. That sounds like a solution to me
Click to expand...
Click to collapse
Yah maybe I am just imaging things idk hahah lift to wake works, along with various other setting so not a huge issue. Thanks